Search

A finite-element model has been developed to simulate the cyclic voltammetric (CV) response of a planar electrode for a 1e outer-sphere redox process, which fully accounts for cell electrostatics, including ohmic potential drop, ion migration, and the structure of the potential-dependent electric double layer. Both reversible and quasi-reversible redox reactions are treated. The simulations compute the time-dependent electric potential and ion distributions across the entire cell during a voltammetric scan. In this way, it is possible to obtain the interdependent faradaic and non-faradaic contributions to a CV and rigorously include all effects of the electric potential distribution on the rate of electron transfer and the local concentrations of the redox species Oz and Rz−1. Importantly, we demonstrate that the driving force for electron transfer can be different to the applied potential when electrostatic interactions are included. We also show that the concentrations of Oz and Rz−1 at the plane of electron transfer (PET) significantly depart from those predicted by the Nernst equation, even when the system is characterised by fast electron transfer/diffusion control. A mechanistic rationalisation is also presented as to why the electric double layer has a negligible effect on the CV response of such reversible systems. In contrast, for quasi-reversible electron transfer the concentrations of redox species at the PET are shown to play an important role in determining CV wave shape, an effect also dependant on the charge of the redox species and the formal electrode potential of the redox couple. Failure to consider electrostatic effects could lead to incorrect interpretation of electron-transfer kinetics from the CV response. Simulated CVs at scan rates between 0.1 and 1000 V s−1 are found to be in good agreement with experimental data for the reduction of 1.0 mM Ru(NH3)63+ at a 2 mm diameter gold disk electrode in 1.0 M potassium nitrate. [ABSTRACT FROM AUTHOR]

Using an electrochemical potential pulse methodology in a mixed solvent system, electrochemical deposition of amorphous vanadium pentoxide (V2O5) nanobelts is possible. Crystallisation of the material is achieved using in air annealing with the temperature of crystallisation identified using in situ heating transmission electron microscopy (TEM). The resulting α-phase V2O5 nanobelts have typical thicknesses of 10-20 nm, widths and lengths in the range 5-37 nm (mean 9 nm) and 15-221 nm (mean 134 nm), respectively. One-cycle reversibility studies for lithium intercalation (discharge) and de-intercalation (charge) reveal a maximum specific capacity associated with three lithium ions incorporated per unit cell, indicative of ω-Li3V2O5 formation. Aberration corrected scanning TEM confirm the formation of ω-Li3V2O5 across the entirety of a nanobelt during discharge and also the reversible formation of the α-V2O5 phase upon full charge. Preliminary second cycle studies reveal reformation of the ω-Li3V2O5, accompanied with a morphological change in the nanobelt dimensions. Achieving α-V2O5 to ω-Li3V2O5 to α-V2O5 reversibility is extremely challenging given the large structural rearrangements required. This phenomenon has only been seen before in a very limited number of studies, mostly employing nanosized V2O5 materials and never before with electrodeposited material. [ABSTRACT FROM AUTHOR]

An SU-8 probe with an array of nine, individually addressable gold microband electrodes (100 μm long, 4 μm wide, separated by 4-μm gaps) was photolithographically fabricated and characterized for detection of low concentrations of chemicals in confined spaces and in vivo studies of biological tissues. The probe's shank (6 mm long, 100 μm wide, 100 μm thick) is flexible, but exhibits sufficient sharpness and rigidity to be inserted into soft tissue. Laser micromachining was used to define probe geometry by spatially revealing the underlying sacrificial aluminum layer, which was then etched to free the probes from a silicon wafer. Perfusion with fluorescent nanobeads showed that, like a carbon fiber electrode, the probe produced no noticeable damage when inserted into rat brain, in contrast to damage from an inserted microdialysis probe. The individual addressability of the electrodes allows single and multiple electrode activation. Redox cycling is possible, where adjacent electrodes serve as generators (that oxidize or reduce molecules) and collectors (that do the opposite) to amplify signals of small concentrations without background subtraction. Information about electrochemical mechanisms and kinetics may also be obtained. Detection limits for potassium ferricyanide in potassium chloride electrolyte of 2.19, 1.25, and 2.08 μM and for dopamine in artificial cerebral spinal fluid of 1.94, 1.08, and 5.66 μM for generators alone and for generators and collectors during redox cycling, respectively, were obtained. [ABSTRACT FROM AUTHOR]

Students who undertake practical electrochemistry experiments for the first time will come face to face with the potentiostat. To many this is simply a box containing electronics which enables a potential to be applied between a working and reference electrode, and a current to flow between the working and counter electrode, both of which are outputted to the experimentalist. Given the broad generality of electrochemistry across many disciplines it is these days very common for students entering the field to have a minimal background in electronics. This article serves as an introductory tutorial to those with no formalized training in this area. The reader is introduced to the operational amplifier, which is at the heart of the different potentiostatic electronic circuits and its role in enabling a potential to be applied and a current to be measured is explained. Voltage follower op-amp circuits are also highlighted, given their importance in measuring voltages accurately. We also discuss digital to analogue and analogue to digital conversion, the processes by which the electrochemical cell receives input signals and outputs data and data filtering. By reading the article, it is intended the reader will also gain a greater confidence in problem solving issues that arise with electrochemical cells, for example electrical noise, uncompensated resistance, reaching compliance voltage, signal digitisation and data interpretation. We also include trouble shooting tables that build on the information presented and can be used when undertaking practical electrochemistry. [ABSTRACT FROM AUTHOR]

Anodic Stripping Voltammetry (ASV) has the capability to detect heavy metals at sub ppb-level with portable and cheap instrumentation making it ideal for in the field (at the source) analysis, however, commercial activity is surprisingly limited. The more commonly used liquid mercury electrodes are now obsolete due to toxicity concerns, and replacements are all based around solid electrodes, which come with their own challenges. This tutorial review aims to discuss the experimental practicalities of ASV, providing a clear overview of the issues for consideration, which can serve as a guide for anyone wanting to undertake analytical ASV. Choice of electrode material (with or without subsequent modification) and solution composition (pH, electrolyte, buffer) are important parameters, as well as an understanding of pH dependent metal speciation and possible intermetallic effects. Measurements made on model solutions often differ from those made on environmental samples with the latter containing organic matter, biological and inorganic species, which themselves can adsorb metal ions. Consideration should also be given to the method of solution collection and the sample container utilised. ASV can be a powerful tool to an analytical chemist, however optimisation for the application of interest is essential, which this review aims to help guide. [ABSTRACT FROM AUTHOR]

Palladium acetate (Pd-acetate) is a common catalyst used in a wide array of organic synthetic reactions in non-aqueous solvents. Due to its high cost and associated toxicity/contamination issues in reaction mixtures, Pd removal and recovery is essential. Here we explore the use of electrodeposition as a means to remove Pd from an acetonitrile (MeCN) based Suzuki cross coupling reaction solution, by plating metallic Pd onto the surface of an electrode (boron doped diamond). We show the importance of adding tolerable volumes of water to the reaction mixture in order to facilitate the electrodeposition process. In MeCN, strong coordination bonds exist between the Pd cation and acetate groups and electrodeposition is not possible. By adding water in controlled quantities we show using spectroscopic, electrochemical and microscopic techniques that acetate ligands are released from Pd co-ordination and first replaced by MeCN molecules, enabling electrodeposition. As the water content increases, the MeCN co-ordinating molecules are replaced by water, due to the favourable water–MeCN interactions overcoming those of Pd cation–MeCN, also promoting electrodeposition. We show that sufficient perturbation of the Pd-acetate structure to enable electrodeposition is possible in MeCN solutions containing as little as 5% water (v/v). We demonstrate 99.4% removal of Pd, as metallic Pd plated onto the electrode surface, from a Suzuki reaction solution, using electrochemical methods. [ABSTRACT FROM AUTHOR]

Conductive diamond possesses unique features as compared to other solid electrodes, such as a wide electrochemical potential window, a low and stable background current, relatively rapid rates of electron-transfer for soluble redox systems without conventional pretreatment, long-term responses, stability, biocompatibility, and a rich surface chemistry. Conductive diamond microcrystalline and nanocrystalline films, structures and particles have been prepared using a variety of approaches. Given these highly desirable attributes, conductive diamond has found extensive use as an enabling electrode across a variety of fields encompassing chemical and biochemical sensing, environmental degradation, electrosynthesis, electrocatalysis, and energy storage and conversion. This review provides an overview of the fundamental properties and highlights recent progress and achievements in the growth of boron-doped (metal-like) and nitrogen and phosphorus-doped (semi-conducting) diamond and hydrogen-terminated undoped diamond electrodes. Applications in electroanalysis, environmental degradation, electrosynthesis electrocatalysis, and electrochemical energy storage are also discussed. Diamond electrochemical devices utilizing micro-scale, ultramicro-scale, and nano-scale electrodes as well as their counterpart arrays are viewed. The challenges and future research directions of conductive diamond are discussed and outlined. This review will be important and informative for chemists, biochemists, physicists, materials scientists, and engineers engaged in the use of these novel forms of carbon. [ABSTRACT FROM AUTHOR]

A systematic examination of the microscopic factors affecting the aqueous solvent (electrolyte) window of polycrystalline (p) boron‐doped diamond (BDD) electrodes in chloride‐containing salt solutions is undertaken by using scanning electrochemical cell microscopy (SECCM) in conjunction with electron backscatter diffraction (EBSD) and Raman microscopy. A major focus is to determine the effect of the local boron doping level, within the same orientation grains, on the solvent window response. EBSD is used to select the predominant (110) orientated areas of the surface with different boron‐doped facets, thereby eliminating crystallographic effects from the electrochemical response. Voltammetric SECCM is employed, whereby a cyclic voltammogram is recorded at each pixel mapped by the meniscus‐contact SECCM cell. The data obtained can be played as an electrochemical movie of potential‐resolved current maps of the surface to reveal spatial variations of electroactivity, over a wide potential range, including the solvent (electrolyte) window. Local heterogeneities are observed, indicating that the solvent window is mainly linked to local dopant levels, with lower dopant levels leading to a wider window, that is, slower electrode kinetics for solvent/electrolyte electrolysis. Furthermore, the effects of O‐ and H‐surface termination of the BDD surface are investigated for the same electrode (in the same area). The surface termination is a particularly important factor: the solvent window of an H‐terminated surface is wider than for O‐termination for similar boron dopant levels. Furthermore, the anodic potential window of the O‐terminated surface is greatly diminished due to chloride electro‐oxidation. These studies provide new perspectives on the local electrochemical properties of BDD and highlight the importance of probing the electrochemistry of BDD at the level of a single crystalline grain (facet) to unravel the factors that control the solvent (aqueous) window of these complex heterogeneous electrodes. Factors affecting solvent window: The boron doping level and surface termination are important for changing the solvent window of boron‐doped diamond (BDD), as illustrated by correlative electrochemical microscopy (see picture). [ABSTRACT FROM AUTHOR]

Electric force microscopy (EFM) is widely used for studying small-scale electrical structures. Its applicability is limited by its spatial resolution and the difficulty of deconvoluting tip effects from the image. We demonstrate that the use of single-wall carbon nanotube (SWNT) tips increases EFM spatial resolution, allowing similar features to be distinguished with separations as small as 15 nm. In addition, we show that the EFM response of the SWNT tips is consistent with a uniform-line-charge model. [ABSTRACT FROM AUTHOR]

Heterogeneous electron transfer (ET) processes at electrode/electrolyte interfaces are of fundamental and applied importance and are extensively studied by a range of electrochemical techniques, all of which have various attributes but also limitations. The present study focuses on the one-electron oxidation of tetrathiafulvalene (TTF) and reduction of tetracyanoquinodimethane (TCNQ) in acetonitrile solution by two powerful electrochemical techniques: Fourier-transformed large amplitude alternating current voltammetry (FTACV); and scanning electrochemical microscopy (SECM), both of which are supported by detailed theoretical models. At conventional Pt, Au and glassy carbon (GC) electrode materials, the apparent (overall) charge transfer kinetic values determined by FTACV give standard ET rate constants, k0FTACV, that are fast and close to the reversible limit. They are in good agreement with highly localised k0SECM measurements determined by SECM under conditions of high mass transport rates. In contrast, the impact of both the complex heterogeneous surface of polycrystalline boron doped diamond (pBDD) and degenerate p-type doping results in a range of k0SECM values across the electrode surface compared to the overall k0FTACV measured for both processes studied. Moreover, the reduced availability of charge carriers at the electrode surface, at each energy state, compared to a metal, which decreases as the potential becomes more negative, results in lower k0 values at pBDD than Pt, Au and GC. The measurement technique also has an influence: SECM measurements are made at much higher local current density than FTACV, and for TCNQ/TCNQṖ−, which has the more negative formal potential, limited charge carrier availability results in k0FTACV ＞ k0SECM, with unusual apparent charge transfer coefficients and voltammetric waveshapes from SECM. These data thus highlight the importance of understanding the influence of the measurement technique and further demonstrate how ET kinetics at pBDD differ from conventional electrodes, in this case for processes in an organic solvent, which has received much less attention compared to aqueous systems for studies with pBDD. [ABSTRACT FROM AUTHOR]

We demonstrate, for the first time, the use of electrochemical imaging to identify defect and defect free areas in single crystal boron doped diamond (BDD) electrodes. Specifically, we show that defects contain different boron dopant concentrations than the surrounding single crystal matrix and that these variations can be visualized using intermittent contact−scanning electrochemical microscopy (IC-SECM). The measured IC-SECM tip currents provide quantitative information on the rates of electron transfer across the single crystal BDD electrodes, which correlate with variations in boron doping levels. In some instances, IC-SECM outperforms alternative methods such as Raman microscopy and cathodoluminescence imaging, due to its intrinsic surface-sensitivity, expanding the application and impact of electrochemical microscopy for materials characterization. The results obtained, and procedure outlined, are particularly valuable for the assessment and screening of single crystal BDD electrodes. [ABSTRACT FROM AUTHOR]

The application of electrochemical X-ray fluorescence (EC-XRF), for the detection of palladium (Pd) contamination in a range of solutions containing electrochemically active compounds, present in excess and relevant to the pharmaceutical and food industries, is reported. In EC-XRF, EC is used to electrochemically pre-concentrate metal on an electrode under forced convection conditions, whilst XRF is employed to spectroscopically quantify the amount of metal deposited, which quantitatively correlates with the original metal concentration in solution. Boron doped diamond is used as the electrode due to its very wide cathodic window and the fact that B and C are non-interfering elements for XRF analysis. The effect of several parameters on the Pd XRF signal intensity are explored including: deposition potential (Edep), deposition time (tdep) and Pd2+ concentration, [Pd2+]. Under high deposition potentials (Edep = −1.5 V), the Pd XRF peak intensity varies linearly with both tdep and [Pd2+]. Quantification of [Pd2+] is demonstrated in the presence of excess acetaminophen (ACM), l-ascorbic acid, caffeine and riboflavin. We show the same Pd XRF signal intensity (for [Pd2+] = 1.1 μM and tdep = 325 s) is observed, i.e. same amount of Pd is deposited on the electrode surface, irrespective of whether these redox active molecules are present or absent. For tdep = 900 s we report a limit of detection for [Pd2+] of 3.6 ppb (34 nM). Even lower LODs are possible by increasing tdep or by optimising the X-ray source specifically for Pd. The work presented for Pd detection in the presence of ACM, achieves the required detection sensitivity stipulated by international pharmacopeia guidelines. [ABSTRACT FROM AUTHOR]

Generator-detector electrodes can be used to both perturb and monitor pH dependant metal–ligand binding equilibria, in situ. In particular, protons generated at the generator locally influence the speciation of metal (Cu2+) in the presence of ligand (triethylenetetraamine), with the detector employed to monitor, in real time, free metal (Cu2+) concentrations. [ABSTRACT FROM AUTHOR]

Voltammetric studies of dopamine (DA) oxidation on pristine and acid-treated single-walled carbon nanotube (SWNT) network electrodes were undertaken in order to investigate both the effect of network density and acid treatment times on the voltammetric characteristics for DA oxidation and the susceptibility of the electrodes to fouling. Through careful control of catalysed chemical vapour deposition growth parameters, multiply interconnected and randomly oriented SWNT networks of two significantly different densities were grown (high density, HD, coverage >10 μm length of SWNT per μm−2 and low density, LD, coverage = 5 (±1) μmSWNTμm−2). Acid treatment was performed to provide materials with different electrochemical properties and SWNT coverage, as determined by field emission-scanning electron microscopy, atomic force microscopy and micro-Raman spectroscopy. A high concentration of DA (100 μM) was deliberately employed to accelerate the fouling phenomenon associated with DA oxidation in order to evaluate the lifetime of the electrodes. HD pristine SWNT networks were found to promote more facile electron transfer (ET) and were less susceptible to blocking, compared to LD pristine SWNT networks. Acid treatment resulted in both a further enhancement of the ET rate and a reduction in susceptibility towards electrode fouling. However, lengthy acid treatment detrimentally affected ET, due to a decrease in network density and significant damage to the SWNT network structure. These studies highlight the subtle interplay between SWNT coverage and degree of acid functionalisation when seeking to achieve the optimal SWNT electrode for the voltammetric detection of DA. [ABSTRACT FROM AUTHOR]

A miniaturised electrochemical cell design for Electron Paramagnetic Resonance (EPR) studies is reported. The cell incorporates a Loop Gap Resonator (LGR) for EPR investigation of electrochemically generated radicals in aqueous (and other large dielectric loss) samples and achieves accurate potential control for electrochemistry by using micro-wires as working electrodes. The electrochemical behaviour of the cell is analysed with COMSOL finite element models and the EPR sensitivity compared to a commercial TE011 cavity resonator using 4-hydroxy-2,2,6,6-tetramethylpiperidin-1-oxyl (TEMPOL) as a reference. The electrochemical EPR performance is demonstrated using the reduction of methyl viologen as a redox probe in both water and acetonitrile. The data reported herein suggest that sub-micromolar concentrations of radical species can be detected in aqueous samples with accurate potential control, and that subtle solution processes coupled to electron transfer, such as comproportionation reactions, can be studied quantitatively using EPR. [ABSTRACT FROM AUTHOR]

Conducting, boron doped diamond (BDD), in addition to its superior material properties, offers several notable attributes to the electrochemist making it an intriguing material for electrochemical research. These include the widest solvent window of all electrode materials; low background and capacitive currents; reduced fouling compared to other electrodes and; the ability to withstand extreme potentials, corrosive and high temperature/pressure environments. However, BDD is not your typical electrode material, it is a semi-conductor doped degenerately with boron to present semi-metallic characteristics. Input from materials scientists, chemists and physicists has been required to aid understanding of how to work with this material from an electrochemical viewpoint and improve electrode quality. Importantly, depending on how the BDD has been grown and then subsequently treated, prior to electrochemical measurement, the resulting material properties can vary quite significantly from one electrode to the next. This likely explains the variability seen by different researchers working on the same experimental systems. The aim of this “protocols” article is not to provide a state-of-the-art review of diamond electrochemistry, suitable references are provided to the interested reader, but instead serves as a reference point for any researcher wishing to commence work with diamond electrodes and interpret electrochemical data. It provides information on how best to characterise the material properties of the electrode before use and outlines the interplay between boron dopant density, non-diamond-carbon content, grain morphology, surface chemistry and redox couple identity. All should ideally be considered when interpretating electrochemical data arising from the diamond electrode. This will aid the reader in making meaningful comparisons between data obtained by different researchers using different diamond electrodes. The guide also aims to help educate the researcher in choosing which form of BDD is best suited to their research application. [ABSTRACT FROM AUTHOR]

Scanning electrochemical cell microscopy is utilised as a read-write pipette-based probe to both electrochemically modify the local surface chemistry of boron doped diamond and ''read'' the resulting modification, at the micron scale. In this specific application, localised electrochemical oxidation results in conversion of the H-terminated surface to O, electrochemically visualised by monitoring the current change for reduction of Ru(NH3)63+. This methodology, in general, provides a platform for read-write analysis of electrodes, opening up new analytical avenues, particularly as the pipette can be viewed as a microfluidic device. [ABSTRACT FROM AUTHOR]

The electrochemical (EC) oxidation of the neurotransmitter, serotonin, at individual single-walled carbon nanotubes (SWNTs) is investigated at high resolution using a novel platform that combines flow-aligned SWNTs with atomic force microscopy, Raman microscopy, electronic conductance measurements, individual SWNT electrochemistry and high-resolution scanning electrochemical cell microscopy (SECCM). SECCM has been used to visualise the EC activity along side-wall sections of metallic SWNTs to assess the extent to which side-walls promote the electrochemistry of this complex multi-step process. Uniform and high EC activity is observed that is consistent with significant reaction at the side-wall, rather than electrochemistry being driven by defects alone. By scanning forward and reverse (trace and retrace) over the same region of a SWNT, it is also possible to assess any blocking of EC activity by serotonin oxidation reaction products. At a physiologically relevant concentration (5 μM), there is no detectable blocking of SWNTs, which can be attributed, at least in part, to the high diffusion rate to an individual, isolated SWNT in the SECCM format. At higher serotonin concentration (2 mM), oligomer formation from oxidation products is much more significant and major blocking of the EC process is observed from line profiles recorded as the SECCM meniscus moves over an SWNT. The SECCM line profile morphology is shown to be highly diagnostic of whether blocking occurs during EC processes. The studies herein add to a growing body of evidence that various EC processes at SWNTs, from simple outer sphere redox reactions to complex multi-step processes, occur readily at pristine SWNTs. The platform described is of general applicability to various types of nanostructures and nanowires. [ABSTRACT FROM AUTHOR]

Thermoelectrochemical experiments can reveal significant information about electrochemical processes compared to ambient only measurements. Typical thermoelectrochemistry is performed using resistively heated wires or laser heated electrodes, both of which can suffer drawbacks associated with the electrode material employed. Boron doped diamond (BDD) is ideal for thermoelectrochemical investigations due to its extremely high thermal conductivity and diffusivity, extreme resistance to thermal ablation (can withstand laser power densities, Pd, of GW cm−2 for nanosecond pulses) and excellent electrochemical properties (low background currents and wide potential window). In this paper we describe the use of a pulsed laser technique to heat the rear of a 1 mm diameter conducting BDD disc electrode, which drives electrochemical solution reactions at the front face. Maximum electrode temperatures of 90.0 °C were recorded experimentally and confirmed by finite element modelling (FEM). The effect of laser pulsed heating (maximum 3.8 kW cm−2; 10 ms on and 90 ms off) on the cyclic voltammetric response of two fast (reversible) outer sphere electron transfer redox mediators (Ru(NH3)63+/2+ and IrCl62−/3−) are investigated. In particular, we observe pulsed increases in the current, which increase with increasing Pd. The potential of the peak current is shifted positively for the Ru(NH3)63+/2+ couple (in accordance with a positive temperature coefficient, β, +0.68 mV K−1) and negatively for the IrCl63−/2− couple (β = −0.48 mV K−1). Scanning backwards, in contrast to that observed for a macrodisc electrode in ambient solution, a cathodic peak is again observed for Ru(NH3)63+/2+ and an anodic peak for IrCl63−/2− couple. We attribute this response to the entropy of the redox reaction and the time-dependant change in mass transport due to the induced thermal gradients at the electrode/electrolyte interface. The observed responses are in qualitative agreement with FEM simulations. [ABSTRACT FROM AUTHOR]

Double potential step chronoamperometry (DPSC) is demonstrated as a technique for investigating partitioning between a solute in aqueous solution and non-polar oil droplet(s) immobilised at an electrode. Here a species in aqueous solution which does not partition into the oil phase is converted at the electrode surface into another species which either does not or does partition into the oil drop. The first case is investigated experimentally by considering generation of the ionic redox species, FcTMA2+ from FcTMA+, while the second case is exemplified by studies of Br2 generation from Br−. The case of molecular partitioning at the three phase interface has received little attention hitherto. To maintain oil droplet stability a boron-doped diamond electrode is employed functionalised with Pt nanoparticles to impart electrocatalytic activity on the electrode towards Br2 production. An arrangement is utilised where the droplet(s) sit(s) on (but does not cover) the electrode surface. We show both experimentally and through finite element simulation how the charge–time profile for the generation and collection of electroactive species can be used to obtain information on the extent of partitioning and how this is affected by factors such as the number and size of droplets. Finally, we highlight the suitability of this approach for investigating reactions which take place within the droplet. [ABSTRACT FROM AUTHOR]

The effect of systematic anodic pre-treatments of pristine single walled carbon nanotube (SWNT) forests on the electrochemical response towards a variety of redox processes is investigated. An experimental arrangement is adopted whereby a microcapillary containing the solution of interest and a quasi reference-counter electrode is brought into contact with a small portion of the forest to enable measurements on the surface before and after controlled anodic polarisation (AP). AP of the surface is found to both improve the voltammetric response (faster apparent heterogeneous electron transfer kinetics) of surface sensitive redox processes, such as Fe2+/3+, and enhance the electrocatalytic response of the SWNTs towards oxygen reduction; the extent of which can be carefully controlled via the applied anodic potential. AP is expected to remove any trace organic (atmospheric) contaminants that may accumulate on the forest over extended periods as well as allowing the controlled introduction of defects, as confirmed by micro-Raman spectroscopy. [ABSTRACT FROM AUTHOR]

Detection of the genotoxic impurity hydrazine (HZ) in the presence of active pharmaceutical ingredients (APIs) represents a significant challenge to the pharmaceutical industry. Here we show how the use of electrochemical strategies in conjunction with metal nanoparticle (NP) functionalised polycrystalline boron-doped diamond (BDD) electrodes enables detection of HZ in the presence of two different electrochemically active APIs. By simply changing the chemical identity of the metal NP, which shifts the detection potential for HZ, it is possible to selectively screen out the API signature from the HZ current - voltage response. HZ detection limits of 11.1 µM (Au NP BDD) and 3.3 µM (Pt NP BDD) in the presence of excess acetaminophen and promazine respectively, were determined using differential pulse voltammetry in quiescent solution. [ABSTRACT FROM AUTHOR]

The change in surface morphology of oxygen-terminated polycrystalline boron doped diamond (pBDD) during electrochemical oxidation of the neurotransmitter serotonin (5-HT), resulting in a corresponding deterioration of the current signal, is investigated for the first time using both high resolution ex situ and in situ microscopy under a range of different electrochemical conditions. In situ electrochemical-atomic force microscopy (EC-AFM) reveals the formation of a granular film over the surface, which grows faster at higher-doped regions of the electrode surface and increases in thickness with repetitive potential cycles. The film properties were investigated using both cyclic voltammetry, with a range of redox species varying in charge, and conducting-AFM. These studies reveal the film to be positively charged and electrically insulating. The extent to which the film forms during 5-HT oxidation could be significantly minimised using different electrochemical procedures, as verified by voltammetry and in situ EC-AFM. Finally, even after extensive film formation, the original current signal could be recovered simply by leaving the electrode at open circuit potential for a short period of time, highlighting the suitability of BDD electrodes for neurotransmitter detection. [ABSTRACT FROM AUTHOR]

Carbon nanotubes have attracted considerable interest for electrochemical, electrocatalytic, and sensing applications, yet there remains uncertainty concerning the intrinsic electrochemical (EC) activity. In this study, we use scanning electrochemical cell microscopy (SECCM) to determine local heterogeneous electron transfer (HET) kinetics in a random 2D network of single-walled carbon nanotubes (SWNTs) on an Si/SiO2 substrate. The high spatial resolution of SECCM, which employs a mobile nanoscale EC cell as a probe for imaging, enables us to sample the responses of individual portions of a wide range of SWNTs within this complex arrangement. Using two redox processes, the oxidation of ferrocenyl-methyl trimethylammonium and the reduction of ruthenium (III) hexaamine, we have obtained conclusive evidence for the high intrinsic EC activity of the sidewalls of the large majority of SWNTs in networks. Moreover, we show that the ends of SWNTs and the points where two SWNTs cross do not show appreciably different HET kinetics relative to the sidewall. Using finite element method modeling, we deduce standard rate constants for the two redox couples and demonstrate that HET based solely on characteristic defects in the SWNT side wall is highly unlikely. This is further confirmed by the analysis of individual line profiles taken as the SECCM probe scans over an SWNT. More generally, the studies herein demonstrate SECCM to be a powerful and versatile method for activity mapping of complex electrode materials under conditions of high mass transport, where kinetic assignments can be made with confidence. [ABSTRACT FROM AUTHOR]

High resolution electrochemical imaging methods provide opportunities to study localized phenomena on electrode surfaces. Here, we review recent advances in scanning electrochemical microscopy (SECM) to study materials involved in (electrocatalytic) energy-related applications. In particular, we discuss SECM as a powerful screening technique and also advances in novel techniques based on micro- and nanopipets, such as the scanning micropipet contact method and scanning electrochemical cell microscopy and their use in energy-related research. [ABSTRACT FROM PUBLISHER]

Optically transparent ultramicroelectrodes (OT-UMEs) comprising carbon nanotube (CNT) networks on quartz, are introduced and used to monitor quantitatively the interfacial concentration of tris(2,2′-bipyridine)ruthenium(ii) during cyclic voltammetry. The OT-CNT-UMEs combine the attractive properties of small-scale electrodes, e.g., high diffusion rates and good signal-to-noise, with the ability to probe electrochemical processes optically, from the rear of the electrode. This enables optical measurements of the solution, close to the electrode surface, without significant interference from absorption or scattering processes. [ABSTRACT FROM AUTHOR]

The characteristics of three different carbon electrodes, glassy carbon (GC), oxygen-terminated polycrystalline boron-doped diamond (pBDD) and “pristine” carbon nanotube networks (CNTN) as voltammetric sensors for detection of the neurotransmitter serotonin have been investigated. For each electrode, detection sensitivity was determined using cyclic voltammetry (CV), a technique often used to provide information on chemical identity in electrochemical assays. The CNTN electrodes were found to exhibit background current densities ca.two orders of magnitude smaller than the GC electrode and ca.twenty times smaller than pBDD, as a consequence of their “pristine” low capacitance and low surface coverage. This was a major factor in determining serotonin detection limits from CV, of 10 nM for the CNTN electrode, 500 nM for pBDD and 2 μM for GC. The two most sensitive electrodes (CNTN and pBDD) were further investigated in terms of resistance to electrode fouling. CV analysis showed that fouling was less on the pBDD electrode compared to the CNTN and, furthemore, for the case of pBDD could be significantly minimised by careful selection of the CV potential limits, in particular by scanning the electrode potential to suitably cathodic values after oxidation of the serotonin. [ABSTRACT FROM AUTHOR]

Electrochemistry at carbon nanotubes (CNTs) is a large and growing field, but one in which there is still uncertainty about the fundamental activity of CNTs as electrode materials. On the one hand, there are many reports which focus on the favourable electrochemical properties of CNT electrodes, such as enhanced detection sensitivity, electrocatalytic effects and reduced fouling. On the other hand, other studies suggest that CNTs may be no more electroactive than graphitic powder. Furthermore, it has been proposed that the catalytic nanoparticles from which CNTs are formed may dominate the electrochemical characteristics in some instances. A considerable body of the literature presumes that the CNT sidewall is inert and that edge-plane-graphite-like open ends and defect sites are responsible for the electron transfer activity observed. In contrast, studies of well characterised single-walled nanotube (SWNT) electrodes, either as individual tubes or as two-dimensional networks, suggest sidewall activity. This review highlights how the various discrepancies in CNT electrochemistry may have arisen, by taking a historical view of the field and identifying crucial issues that still need to be solved. When assessing the behaviour of CNT electrodes, it is vitally important that careful consideration is given to the type of CNT used (SWNT or multi-walled), the quality of the material (presence of impurities), the effect of chemical processing steps in the fabrication of electrodes and the experimental arrangements adopted. Understanding these key features is an essential requirement to develop a fundamental understanding of CNT electrochemistry, to allow a wide range of electroanalytical applications, and to move the field forward rationally. As part of this process, high resolution electrochemical and electrical imaging techniques are expected to play a significant role in the future, as well as theoretical developments which examine the fundamentals of electron transfer at different types of CNTs and their characteristic surface sites. [ABSTRACT FROM AUTHOR]

Electrochemistry at carbon nanotubes (CNTs) is a large and growing field, but one in which there is still uncertainty about the fundamental activity of CNTs as electrode materials. On the one hand, there are many reports which focus on the favourable electrochemical properties of CNT electrodes, such as enhanced detection sensitivity, electrocatalytic effects and reduced fouling. On the other hand, other studies suggest that CNTs may be no more electroactive than graphitic powder. Furthermore, it has been proposed that the catalytic nanoparticles from which CNTs are formed may dominate the electrochemical characteristics in some instances. A considerable body of the literature presumes that the CNT sidewall is inert and that edge-plane-graphite-like open ends and defect sites are responsible for the electron transfer activity observed. In contrast, studies of well characterised single-walled nanotube (SWNT) electrodes, either as individual tubes or as two-dimensional networks, suggest sidewall activity. This review highlights how the various discrepancies in CNT electrochemistry may have arisen, by taking a historical view of the field and identifying crucial issues that still need to be solved. When assessing the behaviour of CNT electrodes, it is vitally important that careful consideration is given to the type of CNT used (SWNT or multi-walled), the quality of the material (presence of impurities), the effect of chemical processing steps in the fabrication of electrodes and the experimental arrangements adopted. Understanding these key features is an essential requirement to develop a fundamental understanding of CNT electrochemistry, to allow a wide range of electroanalytical applications, and to move the field forward rationally. As part of this process, high resolution electrochemical and electrical imaging techniques are expected to play a significant role in the future, as well as theoretical developments which examine the fundamentals of electron transfer at different types of CNTs and their characteristic surface sites. [ABSTRACT FROM AUTHOR]

The development of atomic force microscopy (AFM) over the past 20 years has had a major impact on materials science, surface science and various areas of biology, and it is now a routine imaging tool for the structural characterization of surfaces. The lateral resolution in AFM is governed by the shape of the tip and the geometry of the apex at the end of the tip. Conventional microfabrication routes result in pyramid-shaped tips, and the radius of curvature at the apex is typically less than 10 nm. As well as producing smaller tips, AFM researchers want to develop tips that last longer, provide faithful representations of complex surface topographies, and are mechanically non-invasive. Carbon nanotubes have demonstrated considerable potential as AFM tips but they are still not widely adopted. This review traces the history of carbon nanotube tips for AFM, the applications of these tips and research to improve their performance. [ABSTRACT FROM AUTHOR]

Boron doped diamond (BDD) disk ultramicroelectrodes have been used to sense single nanoparticle (NP) electrocatalytic collision events. BDD serves as an excellent support electrode due to its electrocatalytic inactivity and low background currents and thus can be used to detect the electroactivity of a wide range of colliding NPs, with high sensitivity. In particular, single NP collisions for hydrazine oxidation at Au and Pt NPs were shown to be markedly different. [ABSTRACT FROM AUTHOR]