Search

Real-time measurements of short-chain (C < 8) per- and polyfluoroalkyl substances (PFAS) were performed in Central New Jersey air using chemical ionization mass spectrometry (CIMS). The CIMS was calibrated for C2–C6 perfluorinated carboxylic acids, and 4:2 and 6:2 fluorotelomer alcohols. Of these, only trifluoroacetic acid (TFA) was detected in ambient air above instrumental detection limits. However, instrumental sensitivities (and thus ambient mixing ratios) were estimated for other detected PFAS including C3H2F6O and C6HF11O3. TFA mixing ratios reached up to 0.7 parts-per-trillion by volume (pptv). Estimated C3H2F6O and C6HF11O3 mixing ratios reached the single pptv level. These latter two formulas are consistent with hexafluoroisopropanol (HFIP) and hexafluoropropylene oxide dimer acid (HFPO-DA), respectively, though they may potentially represent multiple isomers. Diel profiles of detected PFAS along with local meteorological data can provide information on potential local sources of these compounds. However, only limited discussion of potential sources was provided here given the sparse detection of these compounds above instrument detection limits. These results demonstrate the potential of online CIMS instrumentation for measuring certain PFAS in ambient outdoor air in real time at or below the pptv level. This technique also has potential for fenceline monitoring and other near-source applications. Implications: Online chemical ionization mass spectrometry (CIMS) has potential for fast, real-time measurements of certain airborne per- and polyfluoroalkyl substances (PFAS). Three short-chain (C < 8) PFAS were detected by CIMS in Central New Jersey ambient air near or above the parts-per-trillion by volume (pptv) level. This technique also has potential for fenceline monitoring and other near-source applications for airborne PFAS. [ABSTRACT FROM AUTHOR]

During thermal processes utilized in affixing fluoropolymer coatings dispersion to fibers and fabrics, coating components are vaporized. It is suspected that per- and polyfluoroalkyl substances (PFAS) from the dispersions may undergo chemical transformations at the temperatures used, leading to additional emitted PFAS thermal byproducts. It is important to characterize these emissions to support evaluation of the resulting environmental and health impacts. In this study, a bench-scale system was built to simulate this industrial process via thermal application of dispersions to fiberglass utilizing relevant temperatures and residence times in sequential drying, baking, and sintering steps. Experiments were performed with two commercially available dispersions and a simple model mixture containing a single PFAS (6:2 fluorotelomer alcohol [6:2 FTOH]). Vapor-phase emissions were sampled and characterized by several off-line and real-time mass spectrometry techniques for targeted and nontargeted PFAS. Results indicate that multiple PFAS thermal transformation products and multiple nonhalogenated organic species were emitted from the exit of the high temperature third (sintering) furnace when 6:2 FTOH was the only PFAS present in the aqueous mixture. This finding supports the hypothesis that temperatures typical of these industrial furnaces may also induce chemical transformations within the fluorinated air emissions. Experiments using the two commercial fluoropolymer dispersions indicate air emissions of part-per-million by volume (ppmv) concentrations of heptafluoropropyl-1,2,2,2-tetrafluoroethyl ether (Fluoroether E1), as well as other PFAS at operationally relevant temperatures. We suspect that E1 is a direct thermal decomposition product (via decarboxylation) of 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propanoic acid (commonly referred to as HFPO-DA) present in the dispersions. Other thermal decomposition products, including the monomer, tetrafluoroethene, may originate from the PFAS used to stabilize the dispersion or from the polymer particles in suspension. This study represents the first researcher-built coating application simulator to report nontargeted PFAS emission characterization, real-time analyses, and the quantification of 30 volatile target PFAS. Implications: Thermal processes used to affix fluoropolymers to fabrics are believed to be a source of PFAS air emissions. These coating operations are used by many large and small manufacturers and typically do not currently require any air emissions control. This research designed and constructed a bench-scale system that simulates these processes and used several off-line and advanced real-time mass spectroscopy techniques to characterize PFAS air emissions from two commercial fluoropolymer dispersions. Further, as the compositions of commercial dispersions are largely unknown, a model three-component solution containing a single PFAS was used to characterize emissions of multiple PFAS thermal transformation products at operationally relevant conditions. This research shows that fluoropolymer fabric coating facilities can be sources of complex mixtures of PFAS air emissions that include volatile and semivolatile PFAS present in the dispersions, as well as PFAS byproducts formed by the thermal transformation of fluorocarbon and hydrocarbon species present in these dispersions. [ABSTRACT FROM AUTHOR]

Per- and polyfluoroalkyl substances (PFAS) are persistent environmental pollutants associated with negative health impacts. Assessments of tubing-related measurement bias for volatile PFAS are lacking, as gas-wall interactions with tubing can delay quantification of gas-phase analytes. We use online iodide chemical ionization mass spectrometry measurements to characterize tubing delays for three gas-phase oxygenated PFAS − 4:2 fluorotelomer alcohol (4:2 FTOH), perfluorobutanoic acid (PFBA), and hexafluoropropylene oxide dimer acid (HFPO-DA). Perfluoroalkoxy alkane and high-density polyethylene tubing yielded relatively short absorptive measurement delays, with no clear dependence on tubing temperature or sampled humidity. Sampling through stainless steel tubing led to prolonged measurement delays due to reversible adsorption of PFAS to the tubing surface, with strong dependence on tubing temperature and sample humidification. Silcosteel tubing afforded shorter measurement delays than stainless steel due to diminished surface adsorption of PFAS. Characterizing and mitigating these tubing delays is crucial for reliable quantification of airborne PFAS. Implications: Per- and polyfluoroalkyl substances (PFAS) are persistent environmental contaminants. Many PFAS are sufficiently volatile to exist as airborne pollutants. Measurements and quantification of airborne PFAS can be biased from material-dependent gas-wall interactions with sampling inlet tubing. Thus, characterizing these gas-wall interactions are crucial for reliably investigating emissions, environmental transport, and fates of airborne PFAS. [ABSTRACT FROM AUTHOR]

We measured organic and inorganic gas-phase acids in the Front Range of Colorado to better understand their tropospheric sources and sinks using a high-resolution time-of-flight chemical ionization mass spectrometer. Measurements were conducted from 4 to 13 August 2014 at the Boulder Atmospheric Observatory during the Front Range Air Pollution and Photochemistry Éxperiment. Diurnal increases in mixing ratios are consistent with photochemical sources of HNO3, HNCO, formic, propionic, butyric, valeric, and pyruvic acid. Vertical profiles taken on the 300m tower demonstrate net surface-level emissions of alkanoic acids, but net surface deposition of HNO3 and pyruvic acid. The surface-level alkanoic acid source persists through both day and night, and is thus not solely photochemical. Reactions between O3 and organic surfaces may contribute to the surface-level alkanoic acid source. Nearby traffic emissions and agricultural activity are a primary source of propionic, butyric, and valeric acids, and likely contribute photochemical precursors to HNO3 and HNCO. The combined diel and vertical profiles of the alkanoic acids and HNCO are inconsistent with dry deposition and photochemical losses being the only sinks, suggesting additional loss mechanisms. [ABSTRACT FROM AUTHOR]

We measured organic and inorganic gas-phase acids in the Front Range of Colorado to better understand their tropospheric sources and sinks using a high-resolution time-of-flight chemical ionization mass spectrometer. Measurements were conducted from 4 to 13 August 2014 at the Boulder Atmospheric Observatory during the Front Range Air Pollution and Photochemistry Éxperiment. Diurnal increases in mixing ratios are consistent with photochemical sources of HNO3, HNCO, formic, propionic, butyric, valeric, and pyruvic acid. Vertical profiles taken on the 300 m tower demonstrate net surface-level emissions of alkanoic acids, but net surface deposition of HNO3 and pyruvic acid. The surface-level alkanoic acid source persists through both day and night, and is thus not solely photochemical. Reactions between O3 and organic surfaces may contribute to the surface-level alkanoic acid source. Nearby traffic emissions and agricultural activity are a primary source of propionic, butyric, and valeric acid, and likely contribute photochemical precursors to HNO3 and HNCO. The combined diel and vertical profiles of the alkanoic acids and HNCO are inconsistent with dry deposition and photochemical losses being the only sinks, suggesting additional loss mechanisms. [ABSTRACT FROM AUTHOR]