Search

Efficient and extended light storage mechanisms are pivotal in photonics, particularly in optical communications, microwave photonics, and quantum networks, as they offer a direct route to circumvent electrical conversion losses and surmount bandwidth constraints. Stimulated Brillouin Scattering (SBS) is an established method to store optical information by transferring it to the acoustic domain, but current on-chip SBS efforts have limited bandwidth or storage time due to the phonon lifetime of several nanoseconds. An alternate approach known as quasi-light storage (QLS), which involves the creation of delayed replicas of optical data pulses via SBS in conjunction with a frequency comb, has been proposed to lift the storage time constraint; however, its realization has been confined to lengthy optical fibers, constraining integration with on-chip optical elements and form factors. Here, we present an experimental demonstration of QLS on a photonic chip leveraging the large SBS gain of chalcogenide glass, achieving delays of up to 500 ns for 1 ns long signal pulses, surpassing typical Brillouin storage processes' acoustic lifetime by more than an order of magnitude and waveguide transit time by two orders of magnitude. We experimentally and numerically investigate the dynamics of on-chip QLS and reveal that the interplay between the acoustic wave that stores the optical signal and subsequent optical pump pulses leads to a reshaping of the acoustic field. Our demonstrations illustrate the potential for achieving ultra-long storage times of individual pulses by several hundred pulse widths, marking a significant stride toward advancing the field of all-optical storage and delay mechanisms. [ABSTRACT FROM AUTHOR]

Microwave photonics (MWP) has unlocked a new paradigm for Radio Frequency (RF) signal processing by harnessing the inherent broadband and tunable nature of photonic components. Despite numerous efforts made to implement integrated MWP filters, a key RF processing functionality, it remains a long-standing challenge to achieve a fully integrated photonic circuit that can merge the megahertz-level spectral resolution required for RF applications with key electro-optic components. Here, we overcome this challenge by introducing a compact 5 mm × 5 mm chip-scale MWP filter with active E-O components, demonstrating 37 MHz spectral resolution. We achieved this device by heterogeneously integrating chalcogenide waveguides, which provide Brillouin gain, in a complementary metal-oxide-semiconductor (CMOS) foundry-manufactured silicon photonic chip containing integrated modulators and photodetectors. This work paves the way towards a new generation of compact, high-resolution RF photonic filters with wideband frequency tunability demanded by future applications, such as air and spaceborne RF communication payloads. Microwave photonic technologies are poised to revolutionise electronic systems. Here the authors integrate necessary but until now elusive, MHz-level resolution photonic processing with on-chip electro-optic components in a compact microwave photonic notch filter. [ABSTRACT FROM AUTHOR]

The Year 2022 marks 100 years since Leon Brillouin predicted and theoretically described the interaction of optical waves with acoustic waves in a medium. Accordingly, this resonant multi-wave interaction is referred to as Brillouin scattering. Today, Brillouin scattering has found a multitude of applications, ranging from microscopy of biological tissue, remote sensing over many kilometers, and signal processing in compact photonic integrated circuits smaller than the size of a thumbnail. What allows Brillouin scattering to be harnessed over such different length scales and research domains are its unique underlying properties, namely, its narrow linewidth in the MHz range, a frequency shift in the GHz range, large frequency selective gain or loss, frequency tunability, and optical reconfigurability. Brillouin scattering is also a ubiquitous effect that can be observed in many different media, such as freely propagating in gases and liquids, as well as over long lengths of low-loss optical glass fibers or short semiconductor waveguides. A recent trend of Brillouin research focuses on micro-structured waveguides and integrated photonic platforms. The reduction in the size of waveguides allows tailoring the overlap between the optical and acoustic waves and promises many novel applications in a compact footprint. In this review article, we give an overview of the evolution and development of the field of Brillouin scattering over the last one hundred years toward current lines of active research. We provide the reader with a perspective of recent trends and challenges that demand further research efforts and give an outlook toward the future of this exciting and diverse research field. [ABSTRACT FROM AUTHOR]

Optical carrier recovery provides a method to increase the carrier-to-signal power ratio at the receiver side of an optical communications system. Here, we propose to use optical carrier recovery based on stimulated Brillouin scattering to help overcome performance limits of Kramers-Kronig direct detection systems that arise due to the need for a high carrier-to-signal power ratio. By transmitting a low power pilot tone along with the signal, we simplify the stimulated Brillouin scattering based optical carrier recovery subsystem, toward better compatibility with the technology demands of short-reach systems. Experimental results show that after 80 km standard single mode fibre transmission, an 8.8 dB required optical signal-to-noise ratio improvement is achieved by the proposed optical carrier recovery subsystem, when compared with the standard Kramers-Kronig direct detection system. Moreover, we measure a receiver sensitivity enhancement of more than 2.8 dB in an optically pre-amplified receiver. These results indicate the potential of the proposed optical carrier recovery subsystem to improve reach or power requirements for Kramers-Kronig direct detection systems. [ABSTRACT FROM AUTHOR]

Unwanted high-power and frequency-agile radio-frequency (RF) signals cause saturation and nonlinear distortions in sensitive RF receivers. RF notch filters with reconfigurable responses over multiple frequency bands are highly sought after to prevent these detrimental effects. Microwave photonic (MWP) notch filters have shown increased frequency agility compared to their electronic counterparts. However, demonstrated filter schemes focus only on single notch responses, leaving them unable to simultaneously attenuate multiple interferers over a wide frequency range. In this work, we demonstrate a high-performance chip-based MWP notch filter with three independent notches widely tunable over 20 GHz. The filter exhibits low RF passband losses of 8 dB and peak notch depth greater than 40 dB with 500 MHz spectral resolution. Specifically, each notch is formed through cascaded optical processing from on-chip, low-loss Si $_3$ N $_4$ micro-resonators and Brillouin gain on an As $_2$ S $_3$ photonic chip. We use this filter to demonstrate high-performance analog RF filtering by substantially attenuating multiple interferers, and show effective image rejection during RF down-conversion in a communications receiver to enable a large reduction of error vector magnitude (EVM) from 60% to 15%. Finally, we provide performance analysis and design perspectives for future photonic integration of the proposed filter subsystem. [ABSTRACT FROM AUTHOR]

On‐chip stimulated Brillouin scattering (SBS) in arsenic trisulfide (As2S3) planar waveguides lead to a range of outstanding demonstrations in microwave photonics signal generation and processing. However, the lack of other integrated functionalities, high back reflections, and large in‐ and out‐fiber coupling losses in high index contrast waveguides cause a number of serious impairments and lessen the applicability of microwave photonic devices. In this report, a hybrid integration scheme is demonstrated where As2S3 waveguides optimized for SBS gain are coupled with very low losses via a vertical taper to a high index contrast and versatile germanosilicate (Ge:SiO2) platform. The Ge:SiO2 waveguide is optimally mode‐matched to commercially available high numerical aperture optical fiber to achieve very low coupling losses. The structure has very low back reflection due to the adiabatic nature of the taper and negligible refractive index difference across the fiber‐chip interface. The hybrid architecture exhibits a similar Brillouin gain coefficient to its monolithic counterpart but with an improvement of >3 dB/facet fiber‐to‐chip loss and >20 dB reduction in facet reflectivity. The hybrid structures demonstrated will bring chalcogenide‐based chip scale SBS devices closer to practical application. [ABSTRACT FROM AUTHOR]

Breaking the symmetry between forward- and backward-propagating optical modes is of fundamental scientific interest and enables crucial functionalities, such as isolators, circulators, and duplex communication systems. Although there has been progress in achieving optical isolation on-chip, integrated broadband nonreciprocal signal processing functionalities that enable transmitting and receiving via the same low-loss planar waveguide, without altering the frequency or mode of the signal, remain elusive. Here, we demonstrate a nonreciprocal delay scheme based on the unidirectional transfer of optical data pulses to acoustic waves in a chip-based integration platform. We experimentally demonstrate that this scheme is not impacted by simultaneously counterpropagating optical signals. Furthermore, we achieve a bandwidth more than an order of magnitude broader than the intrinsic optoacoustic linewidth, linear operation for a wide range of signal powers, and importantly, show that this scheme is wavelength preserving and avoids complicated multimode structures. [ABSTRACT FROM AUTHOR]

Microwave photonic phase shifters based on stimulated Brillouin scattering (SBS) offer tunable and broadband, optically controllable phase shifts. However, achieving a 360° phase shift requires a large amount of SBS gain which often exceeds the available gain and power handling capability of an integrated waveguide. A Radio Frequency (RF) interference technique has recently been utilized in an integrated silicon platform, which uses forward Brillouin scattering in a suspended waveguide to compensate for the lack of available Brillouin gain in standard silicon on insulator platforms. This interference scheme amplifies the phase shift at the expense of link performance. Here, we demonstrate and analytically model a 360° ultra-broadband phase shifter using backward SBS in both fiber and on-chip by combining SBS and RF interference. The phase enhancement scheme greatly reduces the required Brillouin gain and thus the required optical power. Additionally, the backward architecture reduces filter requirements as the residual pump reflections are simpler to remove compared to the pump in the forward Brillouin scattering case, where the pump co-propagates with the signal. The model provides a deeper insight into the properties of the interferometric phase enhancement scheme and predicts the potential trade-offs of an optimized system, showing reduced link loss at higher levels of Brillouin gain. The model also predicts the sensitivity to variations of the interferometric components. Using this technique, we have demonstrated a broadband phase shift over an ultra-broad bandwidth of 0.1 – 65 GHz, limited only by the bandwidth of the available components. Also, we demonstrate a phase enhancement factor of 10 over a bandwidth of 18 GHz in an integrated chalcogenide waveguide. [ABSTRACT FROM AUTHOR]

Stimulated Brillouin scattering drives a coherent interaction between optical signals and acoustic phonons and can be used for storing optical information in acoustic waves. An important consideration arises when multiple optical frequencies are simultaneously employed in the Brillouin process: in this case, the acoustic phonons that are addressed by each optical wavelength can be separated by frequencies far smaller than the acoustic phonon linewidth, potentially leading to cross talk between the optical modes. Here we extend the concept of Brillouin-based light storage to multiple wavelength channels. We experimentally and theoretically show that the accumulated phase mismatch over the length of the spatially extended phonons allows each optical wavelength channel to address a distinct phonon mode, ensuring negligible cross talk and preserving the coherence, even if the phonons overlap in frequency. This phase-mismatch for broad-bandwidth pulses has far-reaching implications allowing dense wavelength multiplexing in Brillouin-based light storage, multifrequency Brillouin sensing and lasing, parallel microwave processing, and quantum photon-phonon interactions. [ABSTRACT FROM AUTHOR]

Brillouin distributed measurement techniques have been extensively developed for structural health monitoring using fibre optic nerve systems. The recent advancement in the spatial resolution capabilities of correlation-based Brillouin distributed technique have reached the sub-mm regime, making this approach a suitable candidate for monitoring and characterizing integrated photonic devices. The small dimension associated with the short length of these devices—on the order of the cm- and mm-scale—requires high sensitivity detection techniques and sub-mm spatial resolution. In this paper, we provide an overview of the different Brillouin sensing techniques in various micro-scale structures such as photonic crystal fibres, microfibres, and on-chip waveguides. We show how Brillouin sensing is capable of detecting fine transverse geometrical features with the sensitivity of a few nm and also extremely small longitudinal features on the order of a few hundreds of μ m . We focus on the technique of Brillouin optical correlation domain analysis (BOCDA), which enables such high spatial resolution for mapping the opto-acoustic responses of micro-scale waveguides. [ABSTRACT FROM AUTHOR]

Controlling and manipulating quanta of coherent acoustic vibrations—phonons—in integrated circuits has recently drawn a lot of attention, since phonons can function as unique links between radiofrequency and optical signals, allow access to quantum regimes and offer advanced signal processing capabilities. Recent approaches based on optomechanical resonators have achieved impressive quality factors allowing for storage of optical signals. However, so far these techniques have been limited in bandwidth and are incompatible with multi-wavelength operation. In this work, we experimentally demonstrate a coherent buffer in an integrated planar optical waveguide by transferring the optical information coherently to an acoustic hypersound wave. Optical information is extracted using the reverse process. These hypersound phonons have similar wavelengths as the optical photons but travel at five orders of magnitude lower velocity. We demonstrate the storage of phase and amplitude of optical information with gigahertz bandwidth and show operation at separate wavelengths with negligible cross-talk. [ABSTRACT FROM AUTHOR]

We use ultrafast pump-probe spectroscopy to study the mechanical vibrations in the time domain of doubly clamped silicon nitride beams. Beams with two different clamping conditions are investigated. Finite element method calculations are performed to analyse the mode spectra of both structures. By calculating the strain integral on the surface of the resonators, we are able to reproduce the effect of the detection mechanism and identify all the measured modes. We show that our spectroscopy technique combined with our modelling tools allow the investigation of several different modes in the super high frequency range (3-30 GHz) and above, bringing more information about the vibration modes of nanomechanical resonators. [ABSTRACT FROM AUTHOR]

The interaction of optical and acoustic waves via stimulated Brillouin scattering (SBS) has recently reached on-chip platforms, which has opened new fields of applications ranging from integrated microwave photonics and on-chip narrow-linewidth lasers, to phonon-based optical delay and signal processing schemes. Since SBS is an effect that scales exponentially with interaction length, on-chip implementation on a short length scale is challenging, requiring carefully designed waveguides with optimized opto-acoustic overlap. In this work, we use the principle of Brillouin optical correlation domain analysis to locally measure the SBS spectrum with high spatial resolution of 800 μm and perform a distributed measurement of the Brillouin spectrum along a spiral waveguide in a photonic integrated circuit. This approach gives access to local opto-acoustic properties of the waveguides, including the Brillouin frequency shift and linewidth, essential information for the further development of high quality photonic-phononic waveguides for SBS applications. [ABSTRACT FROM AUTHOR]