Search

Single-photon emitters are an essential component of quantum networks, and defects or impurities in semiconductors are a promising platform to realize such quantum emitters. Here, we present a model that encapsulates the essential physics of coupling to phonons, which governs the behavior of real single-photon emitters, and critically evaluate several approximations that are commonly utilized. Emission in the telecom wavelength range is highly desirable, but our model shows that nonradiative processes are greatly enhanced at these low photon energies, leading to a decrease in efficiency. Our results suggest that reducing the phonon frequency is a fruitful avenue to enhance the efficiency. [ABSTRACT FROM AUTHOR]

An optical fibre-fed superconducting electro-optic modulator with gigahertz bandwidth and attojoule per bit electric power consumption offers a fast, efficient means to connect superconducting circuits to the room temperature environment. [ABSTRACT FROM AUTHOR]

We report on scalable heterointegration of superconducting electrodes and epitaxial semiconductor quantum dots (QDs) on strong piezoelectric and optically nonlinear lithium niobate. The implemented processes combine the sputter-deposited thin film superconductor niobium nitride and III–V compound semiconductor membranes onto the host substrate. The superconducting thin film is employed as a zero-resistivity electrode material for a surface acoustic wave resonator with internal quality factors Q ≈ 17 000 representing a three-fold enhancement compared to identical devices with normal conducting electrodes. Superconducting operation of ≈ 400 M H z resonators is achieved to temperatures T > 7 K and electrical radio frequency powers P r f > + 9 d B m . Heterogeneously integrated single QDs couple to the resonant phononic field of the surface acoustic wave resonator operated in the superconducting regime. Position and frequency selective coupling mediated by deformation potential coupling is validated using time-integrated and time-resolved optical spectroscopy. Furthermore, acoustoelectric charge state control is achieved in a modified device geometry harnessing large piezoelectric fields inside the resonator. The hybrid QD—surface acoustic wave resonator can be scaled to higher operation frequencies and smaller mode volumes for quantum phase modulation and transduction between photons and phonons via the QD. Finally, the employed materials allow for the realization of other types of optoelectronic devices, including superconducting single photon detectors and integrated photonic and phononic circuits. [ABSTRACT FROM AUTHOR]

Two-dimensional (2D) materials have shown great promise as hosts for high-purity deterministic single-photon sources. In the last few years, the underlying physics of single photon emission in 2D materials have been uncovered, and their optical properties have been improved to meet criteria for a variety of quantum technologies and applications. In this work, we take advantage of the unique characteristics of dielectric nanoantennas in manipulating the electromagnetic response on a sub-wavelength scale to localize and control defect-based single-photon emitters (SPEs) in 2D layered materials. We show that dielectric nanoantennas are capable of inducing high Purcell enhancement >20 and therefore brighter single-photon emission, which is characterized by a reduction of the emitters' radiative lifetimes and enhancement of their brightness by more than an order of magnitude. We demonstrate that the sub-wavelength-scale dielectric nanoantennas can be designed to also impose a predetermined strain profile that determines the confinement potential of the SPE, leading to robust control over the optical polarization with up to 94% extinction ratio. The combination of large Purcell enhancement, polarization orientation, and site control through strain engineering demonstrates the advantages and unique capabilities of dielectric nanoantennas for enhancing the quantum optical properties of 2D SPEs for quantum information technologies. [ABSTRACT FROM AUTHOR]

We review our recent work on multi-dimensional coherent optical spectroscopy (MDCS) of semiconductor nanostructures. Two approaches, appropriate for the study of semiconductor materials, are presented and compared. A first method is based on a non-collinear geometry, where the Four-Wave-Mixing (FWM) signal is detected in the form of a radiated optical field. This approach works for samples with translational symmetry, such as Quantum Wells (QWs) or large and dense ensembles of Quantum Dots (QDs). A second method detects the FWM in the form of a photocurrent in a collinear geometry. This second approach extends the horizon of MDCS to sub-diffraction nanostructures, such as single QDs, nanowires, or nanotubes, and small ensembles thereof. Examples of experimental results obtained on semiconductor QW structures are given for each method. In particular, it is shown how MDCS can assess coupling between excitons confined in separated QWs. [ABSTRACT FROM AUTHOR]

The search for an ideal single-photon source has generated significant interest in discovering emitters in materials as well as developing new manipulation techniques to gain better control over the emitters' properties. Quantum emitters in atomically thin two-dimensional (2D) materials have proven to be very attractive with high brightness, operation under ambient conditions, and the ability to be integrated with a wide range of electronic and photonic platforms. This Perspective highlights some of the recent advances in quantum light generation from 2D materials, focusing on hexagonal boron nitride and transition metal dichalcogenides. Efforts in engineering and deterministically creating arrays of quantum emitters in 2D materials, their electrical excitation, and their integration with photonic devices are discussed. Finally, we address some of the challenges the field is facing and the near-term efforts to tackle them. We provide an outlook toward efficient and scalable quantum light generation from 2D materials to controllable and addressable on-chip quantum sources. [ABSTRACT FROM AUTHOR]

In recent years, quantum-dot-like single-photon emitters in atomically thin van der Waals materials have become a promising platform for future on-chip scalable quantum light sources with unique advantages over existing technologies, notably the potential for site-specific engineering. However, the required cryogenic temperatures for the functionality of these sources has been an inhibitor of their full potential. Existing methods to create emitters in 2D materials face fundamental challenges in extending the working temperature while maintaining the emitter's fabrication yield and purity. In this work, we demonstrate a method of creating site-controlled single-photon emitters in atomically thin WSe2 with high yield utilizing independent and simultaneous strain engineering via nanoscale stressors and defect engineering via electron-beam irradiation. Many of the emitters exhibit biexciton cascaded emission, single-photon purities above 95%, and working temperatures up to 150 K. This methodology, coupled with possible plasmonic or optical micro-cavity integration, furthers the realization of scalable, room-temperature, and high-quality 2D single- and entangled-photon sources. Quantum defects in 2D semiconductors are promising quantum light sources, but the required cryogenic temperatures limit their applicability. Here, the authors report a method to create single-photon emitters in monolayer WSe2 operating at temperatures up to 150 K without plasmonic or optical cavities. [ABSTRACT FROM AUTHOR]

Improvements in temporal resolution of single-photon detectors enable increased data rates and transmission distances for both classical and quantum optical communication systems, higher spatial resolution in laser ranging, and observation of shorter-lived fluorophores in biomedical imaging. In recent years, superconducting nanowire single-photon detectors (SNSPDs) have emerged as the most efficient time-resolving single-photon-counting detectors available in the near-infrared, but understanding of the fundamental limits of timing resolution in these devices has been limited due to a lack of investigations into the timescales involved in the detection process. We introduce an experimental technique to probe the detection latency in SNSPDs and show that the key to achieving low timing jitter is the use of materials with low latency. By using a specialized niobium nitride SNSPD we demonstrate that the system temporal resolution can be as good as 2.6 ± 0.2 ps for visible wavelengths and 4.3 ± 0.2 ps at 1,550 nm. Knowledge about detection latency provides a guideline to reduce the timing jitter of niobium nitride superconducting nanowire single-photon detectors. A timing jitter of 2.6 ps at visible wavelength and 4.3 ps at 1,550 nm is achieved. [ABSTRACT FROM AUTHOR]

We demonstrate cryogenic, all on-chip, single-photon-level photonic integrated circuits on a III-V platform with waveguide-coupled quantum-well sources and tungsten silicide superconducting nanowire single-photon detectors. We have measured the dark count rates below 10−3 counts/s and have reduced the cross talk to an adjacent waveguide by 30 dB. [ABSTRACT FROM AUTHOR]

Recent advances in the isolation and stacking of monolayers of van der Waals materials have provided approaches for the preparation of quantum materials in the ultimate two-dimensional limit1,2. In van der Waals heterostructures formed by stacking two monolayer semiconductors, lattice mismatch or rotational misalignment introduces an in-plane moiré superlattice3. It is widely recognized that the moiré superlattice can modulate the electronic band structure of the material and lead to transport properties such as unconventional superconductivity4 and insulating behaviour driven by correlations5-7; however, the influence of the moiré superlattice on optical properties has not been investigated experimentally. Here we report the observation of multiple interlayer exciton resonances with either positive or negative circularly polarized emission in a molybdenum diselenide/tungsten diselenide (MoSe2/WSe2) heterobilayer with a small twist angle. We attribute these resonances to excitonic ground and excited states confined within the moiré potential. This interpretation is supported by recombination dynamics and by the dependence of these interlayer exciton resonances on twist angle and temperature. These results suggest the feasibility of engineering artificial excitonic crystals using van der Waals heterostructures for nanophotonics and quantum information applications. Multiple interlayer exciton resonances in a MoSe2/WSe2 heterobilayer with a small twist angle are attributed to excitonic ground and excited states confined within the moiré potential. [ABSTRACT FROM AUTHOR]

We demonstrate cryogenic, electrically injected, waveguide-coupled Si light-emitting diodes (LEDs) operating at 1.22 μm. The active region of the LED consists of W centers implanted in the intrinsic region of a p-i-n diode. The LEDs are integrated on waveguides with superconducting nanowire single-photon detectors (SNSPDs). We demonstrate the scalability of this platform with an LED coupled to eleven SNSPDs in a single integrated photonic device. [ABSTRACT FROM AUTHOR]

The effects of confinement on biexciton renormalization in self-assembled InAs and interfacial GaAs quantum dot (QD) ensembles are studied using two-dimensional Fourier-transform spectroscopy. We find that in thermally annealed InAs QDs, changes in the biexciton transition energy are strongly correlated with those of the exciton and that the biexciton binding energy is similar for all QDs in the ensemble. These results are in contrast to those from GaAs QDs formed from interfacial fluctuations of a narrow quantum well (QW). In both the GaAs QW and QDs, correlation is reduced and the biexciton binding exhibits a strong dependence on localization. Comparison with simulations reveals how confinement and Coulomb interactions modify biexciton renormalization. [ABSTRACT FROM AUTHOR]

Optical 2-D Fourier transform spectroscopy is a powerful technique for studying resonant light-matter interactions, determining the transition structure and monitoring dynamics of optically created excitations. The ability to separate homogeneous and inhomogeneous broadening is one important capability. In this paper, we discuss the use of this technique to study excitonic transitions in semiconductor nanostructures. In quantum wells, the effects of structural disorder is observed as inhomogeneous broadening of the exciton resonances. In quantum dots, the temperature dependence of the homogeneous width gives insight into the nature of the dephasing processes. [ABSTRACT FROM PUBLISHER]

In atomically thin transition metal dichalcogenides (TMDs), reduced dielectric screening of the Coulomb interaction leads to strongly correlated many-body states, including excitons and trions, that dominate the optical properties. Higher-order states, such as bound biexcitons, are possible but are difficult to identify unambiguously using linear optical spectroscopy methods. Here, we implement polarization-resolved two-dimensional coherent spectroscopy (2DCS) to unravel the complex optical response of monolayer MoSe2 and identify multiple higher-order correlated states. Decisive signatures of neutral and charged inter-valley biexcitons appear in cross-polarized two-dimensional spectra as distinct resonances with respective ∼20 and ∼5 meV binding energies-similar to recent calculations using variational and Monte Carlo methods. A theoretical model considering the valley-dependent optical selection rules reveals the quantum pathways that give rise to these states. Inter-valley biexcitons identified here, comprising of neutral and charged excitons from different valleys, offer new opportunities for developing ultrathin biexciton lasers and polarization-entangled photon sources. [ABSTRACT FROM AUTHOR]

Predicting and controlling quantum mechanical phenomena require knowledge of the system Hamiltonian. A detailed understanding of the quantum pathways used to construct the Hamiltonian is essential for deterministic control and improved performance of coherent control schemes. In complex systems, parameters characterizing the pathways, especially those associated with inter-particle interactions and coupling to the environment, can only be identified experimentally. Quantitative insight can be obtained provided the quantum pathways are isolated and independently analysed. Here we demonstrate this possibility in an atomic vapour using optical three-dimensional Fourier-transform spectroscopy. By unfolding the system's nonlinear response onto three frequency dimensions, three-dimensional spectra unambiguously reveal transition energies, relaxation rates and dipole moments of each pathway. The results demonstrate the unique capacity of this technique as a powerful tool for resolving the complex nature of quantum systems. This experiment is a critical step in the pursuit of complete experimental characterization of a system's Hamiltonian. [ABSTRACT FROM AUTHOR]