Search

This article analyses the effects of deformation on the structure of CMnSi steel at various deformation levels. After hot forging, the structure of CMnSi steel comprises coarse-sized alpha and pearlite particles. The average grain size of steel after forging was 100 μm. After hot rolling, the grain size gradually decreases, with the average size of the ferrite and pearlite grains measured as 60 μm. After that, CMnSi steel was subjected to cold deformation at levels of 40%, 60%, and 80%. The grain size of the CMnSi steel sample after 80% cold deformation reached level 7, corresponding to about 25 μm. For a deformation level of 40%, the grain size was level 5, corresponding to 40 μm, while a deformation level of 60% produced a grain size of 35 μm, corresponding to level 6. In addition, scanning electron microscopy showed that after 80% deformation, smaller particles with a size of about 5 μm appear inside the parent particles. Moreover, energy-dispersive X-ray spectroscopy analysis revealed the carbide appearance in the form M23C6, with M being a mixture of Fe and Mn. These carbides have a fine size of about 1–2 μm and contribute to the prevention of particle growth during subsequent heat treatments. [ABSTRACT FROM AUTHOR]

In this paper, a novel approach to realize the carrier-based pulse width modulation (CBPWM) method for indirect matrix converter (IMC) is presented. The advantage of the proposed CBPWM method is that only one triangular carrier signal with constant gradient falling and rising edges is used to generate the PWM to the power switches in both the rectifier and the inverter stages of IMC. The analysis of the proposed CBPWM method is based on the space vector approach and the relationship between CBPWM and space vector pulse width modulation (SVPWM) methods is provided. In this paper, four CBPWM methods called: sinusoidal PWM, third harmonic injection PWM, symmetrical PWM and discontinuous PWM are presented. These different CBPWM schemes are established according to the distribution of zero vectors and the switching pattern of the SVPWM method. The comparison of output voltage performance with different CBPWM schemes are investigated. Compared to the conventional method the calculation time of the proposed method is reduced around 50%. Concretely, the calculation time of the SVPWM method is 45 μs, while the calculation time of the proposed method is 22 μs. The experiments have been carried out to show the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Pulse width modulation strategies have been developed for indirect matrix converters (IMCs) in order to improve their performance. In indirect matrix converters, the LC input filter is used to remove input current harmonics and electromagnetic interference problems. Unfortunately, due to the existence of the input filter, the input power factor is diminished, especially during operation at low voltage outputs. In this paper, a new space vector modulation (SVM) is proposed to compensate for the input power factor of the indirect matrix converter. Both computer simulation and experimental studies through hardware implementation were performed to verify the effectiveness of the proposed modulation strategy. [ABSTRACT FROM AUTHOR]

From the fruit ofPandanus tectoriusParkinson ex Du Roi, one new dihydrofurocoumarin, named pandanusin A (1) and 15 known compounds, including one furanocoumarin (2), two coumarins (3,4), four lignans (5–8), one neolignan (9), two flavonoids (10,11), three phenolics (12–14), one monoglyceride (15) and one monosaccharide (16) were isolated by various chromatography methods. Among them, compounds (3–5) were obtained from thePandanusgenus for the first time and compounds (9–14,16) were reported from this species for the first time. Their structures were elucidated by HR–ESI–MS, NMR 1D and 2D experiments and comparison with previous reported data. Theα-glucosidase inhibitory activity of all compounds was measured. The isolated compounds (1–12,14)showed betterα-glucosidase inhibitory activity (IC50 = 42.2, 36.5, 84.7, 73.2, 40.8, 26.7, 76.5, 33.8, 68.1, 14.4, 22.1, 81.5, 43.8 μM, respectively) than the standard drug acarbose (IC50 = 214.5 μM). [ABSTRACT FROM PUBLISHER]

This paper proposes a decentralized control structure and method for a multilevel single-phase power converter using space vector pulse width modulation (SVPWM). The focus of this paper is on the decentralized control structure for the power converter cells that will exchange information with neighboring cells in order to adjust the switching vector and switching time for each cell. In this study, the switching vectors and the corresponding switching times of each cell will be self-determined based on the phase angle of two neighboring cells. Normally, SVPWM applied to the multilevel power converters need complete information about the total cells and cell's position to build a control algorithm. Meanwhile, a decentralized space vector pulse width modulation (DSVPWM) method is proposed that can be applied to power converters with any number of cells and can be considered as a multilevel SVPWM method. In addition, the decentralized multilevel single-phase power converter has high flexibility with which it is possible to easily adjust the number of active cells, so that the output voltage can be adjusted quickly; this provides the ability to dynamically reconfigure without interrupting the power energy supply process. The proposed control structure and method are effectively verified based on simulation and experimental results. Experimental results are evaluated based on a 9-level single-phase power converter, which has an RL load with rated parameters 220 V/500 W. [ABSTRACT FROM AUTHOR]

This letter proposes a novel method to reject $6n \pm 1$ harmonics in the stator voltage at the point of common coupling (PCC) for a stand-alone doubly-fed induction generator (DFIG) supplying a balanced three-phase diode rectifier. These harmonics are rejected by using the rotor current controller in the fundamental synchronous reference frame. The proposed control algorithm is based on a proportional integral controller and a bank of resonant filters. In this frame, each resonant filter in the rotor current controller has the possibility of rejecting one pair of the positive and the negative stator harmonic voltages at the PCC. Experimental results with 2.2-kW DFIG are shown in this letter. [ABSTRACT FROM PUBLISHER]