Search

Purpose: Synthetic prosthetic materials that are fully absorbable seek to reduce the host foreign body reaction and promote host tissue regeneration. This preclinical trial was designed to analyse, in the long term, the behaviour of two prosthetic meshes, one synthetic and one composed of porcine collagen, in abdominal wall reconstruction. Methods: Partial defects were created in the abdominal walls of New Zealand rabbits and repaired using a synthetic absorbable mesh (Phasix™) or a non-crosslinked collagen bioprosthesis (Protexa™). After 3, 6, 12 and 18 months, specimens were recovered for light microscopy and collagen expression analysis to examine new host tissue incorporation, macrophage response and biomechanical strength. Results: Both materials showed good host tissue incorporation in line with their spatial structure. At 18 months postimplant, Protexa™ was highly reabsorbed while the biodegradation of Phasix™ was still incomplete. Collagenization of both materials was good. Macrophage counts steadily decreased over time in response to Phasix™, yet persisted in the collagen meshes. At 18 months, zones of loose tissue were observed at the implant site in the absence of herniation in both implant types. The stress–stretch behaviour of Phasix™ implants decreased over time, being more pronounced during the period of 12–18 months. Nevertheless, the abdominal wall repaired with Protexa™ became stiffer over time. Conclusion: Eighteen months after the implant both materials showed good compatibility but the biodegradation of Phasix™ and Protexa™ was incomplete. No signs of hernia were observed at 18 months with the stress–stretch relations being similar for both implants, regardless of the more compliant abdominal wall repaired with Protexa™ at short term. [ABSTRACT FROM AUTHOR]

Background: The interest in non-manipulated cells originating from adipose tissue has raised tremendously in the field of tissue engineering and regenerative medicine. The resulting stromal vascular fraction (SVF) cells have been successfully used in numerous clinical applications. The aim of this experimental work is, first to combine a macroporous synthetic mesh with SVF isolated using a mechanical disruption process, and to assess the effect of those cells on the early healing phase of hernia. Methods: Human SVF cells combined with fibrin were used to coat commercial titanized polypropylene meshes. In vitro, viability and growth of the SVF cells were assessed using live/dead staining and scanning electron microscopy. The influence of SVF cells on abdominal wall hernia healing was conducted on immunodeficient rats, with a focus on short-term vascularization and fibrogenesis. Results: Macroporous meshes were easily coated with SVF using a fibrin gel as temporary carrier. The in vitro experiments showed that the whole process including the isolation of human SVF cells and their coating on PP meshes did not impact on the SVF cells' viability and on their capacity to attach and to proliferate. In vivo, the SVF cells were well tolerated by the animals, and coating mesh with SVF resulted in a decrease degree of vascularity compared to control group at day 21. Conclusions: The utilization of SVF-coated mesh influences the level of angiogenesis during the early onset of tissue healing. Further long-term animal experiments are needed to confirm that this effect correlates with a more robust mesh integration compared to non-SVF-coated mesh. [ABSTRACT FROM AUTHOR]

Purpose: Mesh-related infection is a critical outcome for patients with hernia defect stabilized with synthetic or biological meshes. Even though bioactive meshes loaded with antibiotics or antiseptics are slowly emerging in the market, the available solutions still lack versatility. Here, we proposed a polymer solution, i.e., hyaluronic acid-poly(N-isopropylacrylamide) (HApN), which forms a hydrogel to be used as coating for meshes only when it reaches body temperature. Methods: We assessed how the gelation of HApN was influenced by the incorporation of different antibiotic and antiseptic formulations, and how this gel can be used to coat several mesh types. The impact of the coating on the elastic behavior of a macroporous mesh was tested under cyclic elongation condition. Finally, we selected two different coating formulations, one based on antibiotics (gentamicin + rifampicin) and one based on antiseptic (chlorhexidine) and tested in vitro their antimicrobial efficacies. Results: HApN can be used as carrier for different antimicrobial agents, without having a strong influence on its gelation behavior. Porous or dense meshes can be coated with this polymer, even though the stability was not optimal on macroporous meshes such as Optilene when pores are too large. HApN loaded with drugs inhibited in vitro the growth of several Gram-positive and Gram-negative bacteria. Conclusion: Compared to the available technologies developed to endow meshes with antibacterial activity, the proposed HApN offers further versatility with potential to prevent mesh-related infection in hernioplasty. [ABSTRACT FROM AUTHOR]

Purpose: Biomaterials with an antimicrobial coating could avoid mesh-associated infection following hernia repair. This study assesses the use of a chlorhexidine-loaded carboxymethylcellulose gel in a model of Staphylococcus aureus mesh infection.Methods: A 1% carboxymethylcellulose gel containing 0.05% chlorhexidine was prepared and tested in vitro and in vivo. The in vitro tests were antibacterial activity (S. aureus; agar diffusion test) and gel cytotoxicity compared to aqueous 0.05% chlorhexidine (fibroblasts; alamarBlue). For the in vivo study, partial abdominal wall defects (5 × 2 cm) were created in New Zealand white rabbits (n = 15) and inoculated with 0.25 mL of S. aureus (106 CFU/mL). Defects were repaired with a lightweight polypropylene mesh (Optilene) without coating (n = 3) or coated with a carboxymethylcellulose gel (n = 6) or chlorhexidine-loaded carboxymethylcellulose gel (n = 6). Fourteen days after surgery, bacterial adhesion to the implant (sonication, immunohistochemistry), host tissue incorporation (light microscopy) and macrophage reaction (immunohistochemistry) were examined.Results: Carboxymethylcellulose significantly reduced the toxicity of chlorhexidine (p < 0.001) without limiting its antibacterial activity. While control and gel-coated implants were intensely contaminated, the chlorhexidine-gel-coated meshes showed a bacteria-free surface, and only one specimen showed infection signs. The macrophage reaction in this last group was reduced compared to the control (p < 0.05) and gel groups.Conclusions: When incorporated in the carboxymethylcellulose gel, chlorhexidine showed reduced toxicity yet maintained its bactericidal effect at the surgery site. Our findings suggest that this antibacterial gel-coated polypropylene meshes for hernia repair prevent bacterial adhesion to the mesh surface and have no detrimental effects on wound repair. [ABSTRACT FROM AUTHOR]

Purpose: This study assesses the use of an absorbable polymer loaded with chlorhexidine (CHX) as an antibacterial coating for polypropylene (PP) meshes employed in hernia repair.Methods: The polymer N,N-dimethyl-N-benzyl-N-(2-methacryloyloxyethyl) ammonium bromide was loaded with CHX (1 % w/w). Fragments (1 cm2) of Optilene® Mesh Elastic were coated either with the unloaded (POL) or CHX-loaded polymer (POL-CHX). Uncoated fragments (PP) served as controls. The release kinetics of the POL-CHX coating was monitored by HPLC. Sterile fragments were placed on agar plates previously contaminated with 106 CFU of Staphylococcus aureus (Sa) ATCC25923, Staphylococcus epidermidis (Se) ATCC12228, or Escherichia coli (Ec) ATCC25922 and incubated at 37 °C for 1/2/7 days. At each time point, inhibition halos were measured and bacterial adhesion to the meshes quantified by sonication and scanning electron microscopy. Coating cytotoxic effects were examined on cultured fibroblasts.Results: The polymer coating gradually released CHX over 3 days. Inhibition halos were produced only around the POL-CHX-coated meshes and these were significantly smaller for Ec than Sa or Se (p < 0.01). While POL-CHX prevented bacterial adhesion to the mesh, the reduced bacterial yields over time were observed for the POL-coated versus control PP meshes (p < 0.001). By day 7, only Ec remained attached to the surface of control meshes. The POL coating was not cytotoxic, yet POL-CHX reduced the viability of cultured fibroblasts.Conclusions: When loaded with the antiseptic CHX, this quaternary ammonium-based polymer coating released its contents in a controlled manner indicating its potential prophylactic use to reduce the risk of infection following PP mesh implantation. [ABSTRACT FROM AUTHOR]

Purpose: Although clinical data suggest the similar performance of collagen-based biological prosthetic materials to some polymer materials, the use of a biomesh for abdominal hernia repair in a setting of infection is controversial. This in vitro study compares the adhesion of two Staphylococcus strains to polymer and biological meshes.Methods: Sterile fragments of Optilene(®) (Op), Surgipro™ (Surg), Preclude(®) (Precl), TIGR(®) (TIGR), Bio-A(®) (BioA), Permacol™ (Perm), Surgisis(®) (SIS), and Tutomesh(®) (Tuto) were inoculated with 10(6) CFU of S. aureus (Sa) or S. epidermidis (Se) (n = 18 per strain per mesh). The first five meshes are polymer materials while Perm, SIS and Tuto are biomeshes. After 24/48 h of incubation, bacterial adhesion was examined by sonication, scanning electron microscopy (SEM) and light microscopy.Results: Sa and Se showed a high affinity for the absorbable meshes (TIGR, BioA, Perm, SIS, Tuto) (p < 0.001). Precl yielded the lowest bacterial loads (p < 0.001). Surg, Precl and BioA underwent no substantial change over time, while Op (p < 0.001) and TIGR (p < 0.05) showed decreasing bacterial loads during incubation. The Sa-contaminated biomeshes behaved similarly while biomeshes inoculated with Se returned higher bacterial yields at 48 h, especially SIS (p < 0.001). SEM and light microscopy observations revealed planktonic bacteria and biofilms on the polymer surface and bacterial niches in biomesh pores.Conclusions: Within 48 h of contamination, the absorbable polymer and biological meshes exhibited high bacterial loads. Given their lower affinity for both bacterial strains, the conventional non-absorbable polymer materials could be better candidates for use in contaminated surgical fields. [ABSTRACT FROM AUTHOR]

In vitro and in vivo studies described the myokine IL‐15 and its receptor IL‐15Rα as anabolic/anti‐atrophy agents, however, the protein expression of IL‐15Rα has not been measured in human skeletal muscle and data regarding IL‐15 expression remain inconclusive. The purpose of the study was to determine serum and skeletal muscle IL‐15 and IL‐15Rα responses to resistance exercise session and to analyze their association with myofibrillar protein synthesis (MPS). Fourteen participants performed a bilateral leg resistance exercise composed of four sets of leg press and four sets of knee extension at 75% 1RM to task failure. Muscle biopsies were obtained at rest, 0, 4 and 24 hours post‐exercise and blood samples at rest, mid‐exercise, 0, 0.3, 1, 2, 4 and 24 hours post‐exercise. Serum IL‐15 was increased by ~5.3‐fold immediately post‐exercise, while serum IL‐15Rα decreased ~75% over 1 hour post‐exercise (P<.001). Skeletal muscle IL‐15Rα mRNA and protein expression were increased at 4 hours post‐exercise by ~2‐fold (P<.001) and ~1.3‐fold above rest (P=.020), respectively. At 24 hours post‐exercise, IL‐15 (P=.003) and IL‐15Rα mRNAs increased by ~2‐fold (P=.002). Myofibrillar fractional synthetic rate between 0‐4 hours was associated with IL‐15Rα mRNA at rest (r=.662, P=.019), 4 hours (r=.612, P=.029), and 24 hours post‐exercise (r=.627, P=.029). Finally, the muscle IL‐15Rα protein up‐regulation was related to Leg press 1RM (r=.688, P=.003) and total weight lifted (r=.628, P=.009). In conclusion, IL‐15/IL‐15Rα signaling pathway is activated in skeletal muscle in response to a session of resistance exercise. [ABSTRACT FROM AUTHOR]

Introduction: The most common treatment option for ventral and umbilical hernias is the implant of a prosthetic mesh. This study compares the behaviour of a new mesh, Parietex™ Composite Ventral Patch (Ptx), with two commercially available meshes, Ventralex™ ST Hernia Patch and Proceed™ Ventral Patch.Materials and Methods: The following meshes were tested in a umbilical-hernia repair model using 54 rabbits: Ventralex™ ST Hernia Patch (Vent) (Bard Davol Inc., USA); Proceed™ Ventral Patch (PVP) (Ethicon, USA) and Ptx (Covidien, Sofradim, France) (n = 18 each). At 3, 7 and 14 days postimplantation, peritoneal behaviour and adhesion formation were assessed by sequential laparoscopy. Adhesions were scored for consistency and quantified by image analysis. The animals were euthanized at 2 (n = 27) and 6 weeks (n = 27) postsurgery. Mesothelial cover of meshes and tissue ingrowth were determined by scanning and light microscopy.Results: Seroma was observed in 1/18 Vent, 7/18 PVP and 4/18 Ptx, mainly between the implant and subcutaneous tissue. Firm omental adhesions between the mesh and parietal peritoneum were noted in 2/9 Vent, 6/9 PVP and 3/9 Ptx at 2 weeks and in 3/9 Vent, 5/9 PVP and 1/9 Ptx at 6 weeks. Three (out of 9) encapsulated PVP implants showed "tissue-integrated" adhesions affecting the intestinal loops. No differences between implants were detected in the surface area occupied by adhesions at 2 weeks, though at 6 weeks, percentages were significantly higher (p < 0.01; Mann-Whitney U test) for PVP compared to Ptx or Vent. At this time point, Ptx and Vent showed good host tissue incorporation and optimal mesothelialization.Conclusions: The PVP implants showed greater adhesion formation than the other materials. Postimplantation behaviour was comparable for Ptx and Vent including scarce adhesion formation and optimal mesothelialization. Regarding tissue integration, Ptx showed greater long-term collagenization of the neoformed tissue. [ABSTRACT FROM AUTHOR]

Introduction: The most common treatment option for ventral and umbilical hernias is the implant of a prosthetic mesh. This study compares the behaviour of a new mesh, Parietex™ Composite Ventral Patch ( Ptx), with two commercially available meshes, Ventralex™ ST Hernia Patch and Proceed™ Ventral Patch. Materials and methods: The following meshes were tested in a umbilical-hernia repair model using 54 rabbits: Ventralex™ ST Hernia Patch ( Vent) (Bard Davol Inc., USA); Proceed™ Ventral Patch ( PVP) (Ethicon, USA) and Ptx (Covidien, Sofradim, France) ( n = 18 each). At 3, 7 and 14 days postimplantation, peritoneal behaviour and adhesion formation were assessed by sequential laparoscopy. Adhesions were scored for consistency and quantified by image analysis. The animals were euthanized at 2 ( n = 27) and 6 weeks ( n = 27) postsurgery. Mesothelial cover of meshes and tissue ingrowth were determined by scanning and light microscopy. Results: Seroma was observed in 1/18 Vent, 7/18 PVP and 4/18 Ptx, mainly between the implant and subcutaneous tissue. Firm omental adhesions between the mesh and parietal peritoneum were noted in 2/9 Vent, 6/9 PVP and 3/9 Ptx at 2 weeks and in 3/9 Vent, 5/9 PVP and 1/9 Ptx at 6 weeks. Three (out of 9) encapsulated PVP implants showed 'tissue-integrated' adhesions affecting the intestinal loops. No differences between implants were detected in the surface area occupied by adhesions at 2 weeks, though at 6 weeks, percentages were significantly higher ( p < 0.01; Mann-Whitney U test) for PVP compared to Ptx or Vent. At this time point, Ptx and Vent showed good host tissue incorporation and optimal mesothelialization. Conclusions: The PVP implants showed greater adhesion formation than the other materials. Postimplantation behaviour was comparable for Ptx and Vent including scarce adhesion formation and optimal mesothelialization. Regarding tissue integration, Ptx showed greater long-term collagenization of the neoformed tissue. [ABSTRACT FROM AUTHOR]

Background: This study compared the in vitro and in vivo behaviors at the peritoneal interface of a new polymer material (Bio-A) and of two biologic non-cross-linked materials (Tutomesh [Tuto] and Strattice [St]), all biodegradable. Methods: Omentum mesothelial cells from rabbits were seeded onto the three prosthetic materials tested. At 1, 4, 8, 16, and 24 h after implantation, mesothelial cover was performed using a scanning electron microscope (SEM). In the in vivo study, 3 × 3 cm mesh fragments were placed on the parietal peritoneum of the same rabbits and fixed at the four corners with individual stitches. The implants were randomized such that six fragments of each material were implanted in nine animals (2 per animal). Adhesion formation was quantified by sequential laparoscopy and image analysis 3, 7, and 14 days after implantation. The animals were killed at 90 days, and the meshes were subjected to microscopy and immunohistochemistry. Results: The in vitro mesothelial cover was significantly greater for St than for Bio-A at each time point. The percentage of cover for St was also higher than for Tuto 16 and 24 h after seeding and higher for Tuto than for Bio-A at all time points. Compared with the biologic meshes, significantly higher adhesion percentages were recorded for Bio-A. At 90 days after implantation, differences in absorption measured as percentage of reduction in mesh thickness were detected among all the meshes. The least absorbed was St. The neoperitoneum thickness was significantly greater for the biologic meshes than for the polymer mesh, although this variable also differed significantly between St and Tuto. Macrophage counts were higher for Bio-A than for the biologic meshes. Conclusions: Greater mesothelial cover was observed in vitro for St. In vivo, adhesion formation and the macrophage response induced by Bio-A were greater than those elicited by the biologic materials. Bio-A and Tuto showed substantial biodegradation compared with St. [ABSTRACT FROM AUTHOR]

Purpose: The use prosthetic materials for the surgical repair of abdominal wall defects has become almost standard practice. This study was designed to assess the expression of different growth factors (VEGF/TGF-β1) and macrophages during the early host tissue incorporation of several polypropylene lightweight (PP-LW)-including one partially absorbable-and heavyweight (PP-HW) prosthetic meshes. Methods: Ventral defects were created in the anterior abdominal wall of New Zealand rabbits and repaired by fixing PP-LW meshes of different pore size and a low porosity PP-HW mesh to the edges of the defect. Following killing 14 days after implant, specimens were taken to examine TGF-β1/VEGF gene and protein expression by qRT-PCR and immunohistochemistry. The macrophage response was also assessed. Results: All the materials showed good host tissue incorporation, with a more severe inflammatory reaction and greater numbers of macrophages recorded in the partially absorbable LW implants. Relative amounts of VEGF mRNA were significantly lower for the LW partially absorbable implants compared with the remaining LW meshes. Protein expression of VEGF showed undetectable or minimum staining in the different groups. TGF-β1 mRNA levels were also lower in the partially absorbable group compared with one of PP-LW type of mesh. Gene expression patterns were consistent with the TGF-β1 protein levels detected. Conclusions: The results suggest that VEGF and TGF-β1 expression were independent of mesh pore size. The expression of both growth factors and the macrophage response were correlated with the presence of biodegradable material in the mesh. The presence of absorbable material in the LW mesh gave rise to a more intense inflammatory reaction and the reduced synthesis of growth factors known to contribute to neotissue maturation. [ABSTRACT FROM AUTHOR]