Search

The well‐known ferromagnetic oxide, NiFe2O4, was studied as a potential candidate for room‐temperature Type II magnetoelectrics. A spin canting as one of the essential requirements for Type II multiferroics was induced by breaking the stoichiometry, that is, intentionally subtracting Fe ions. We observed that Fe ions were first subtracted exclusively from the tetrahedral sites, leading to an increase in the magnetoelectric coupling owing to an increasing degree of spin canting. The enhancement in the magnetoelectric coupling culminated beyond the subtraction level of ~30 at.%, at which Fe ions started to be removed from the octahedral sites. Alongside, we observed that the subtraction of Fe ions gives rise to a ferroelectricity due to the formation of defect complexes that establish an internal bias field. [ABSTRACT FROM AUTHOR]

Harvesting energy from otherwise wasted resources has been intensively investigated as a promising technology especially for enabling the deployment of autonomous wireless-sensor networks for the Internet of Things. Multi-stimulus energy harvesting, simultaneously from different energy sources, provides an attractive opportunity to amplify the power density of harvesters, thereby extending their potential for self-powered devices. In this article, we review recent and ongoing research efforts aimed at enhancing the energy-harvesting performance of magnetoelectric (ME) composite harvesters employing dual stimuli, mechanical vibrations, and magnetic fields. After a brief introduction to vibration, magnetic field, and dual-mode energy harvesting, we survey the key materials utilized for ME energy harvesting. We then focus on progress in this area and discuss relevant ideas to realize electromechanical and magnetoelectric coupling for harvesting energy from mechanical vibrations and magnetic fields simultaneously. We provide perspectives and future directions as well. [ABSTRACT FROM AUTHOR]

In this study, a flexible magnetoelectric (ME) heterostructure of PZT/Ni was fabricated by depositing a (001) oriented Pb(Zr0.52Ti0.48)O3 (PZT) film on a thin, flexible Ni foil buffered with LaNiO3/HfO2. Excellent ferroelectric properties and large ME voltage coefficient of 3.2 V/cm ⋅ Oe were realized from the PZT/Ni heterostructure. The PZT/Ni composite’s high performance was attributed to strong texturing of the PZT film, coupled with the compressive stress in the piezoelectric film. Besides, reduced substrate clamping in the PZT film due to the film on the foil structure and strong interfacial bonding in the PZT/LaNiO3/HfO2/Ni heterostructure could also have contributed to the high ME performance of PZT/Ni. [ABSTRACT FROM AUTHOR]

Flexible piezoelectric energy harvesters have been regarded as an overarching candidate for achieving self-powered electronic systems for environmental sensors and biomedical devices using the self-sufficient electrical energy. In this research, we realize a flexible high-output and lead-free piezoelectric energy harvester by using the aerosol deposition method and the laser lift-off process. We also investigated the comprehensive biocompatibility of the lead-free piezoceramic device using ex-vivo ionic elusion and in vivo bioimplantation, as well as in vitro cell proliferation and histologic inspection. The fabricated LiNbO3-doped (K,Na)NbO3 (KNN) thin film-based flexible energy harvester exhibited an outstanding piezoresponse, and average output performance of an open-circuit voltage of ~130 V and a short-circuit current of ~1.3 μA under normal bending and release deformation, which is the best record among previously reported flexible lead-free piezoelectric energy harvesters. Although both the KNN and Pb(Zr,Ti)O3 (PZT) devices showed short-term biocompatibility in cellular and histological studies, excessive Pb toxic ions were eluted from the PZT in human serum and tap water. Moreover, the KNN-based flexible energy harvester was implanted into a porcine chest and generated up to ~5 V and 700 nA from the heartbeat motion, comparable to the output of previously reported lead-based flexible energy harvesters. This work can compellingly serve to advance the development of piezoelectric energy harvesting for actual and practical biocompatible self-powered biomedical applications beyond restrictions of lead-based materials in long-term physiological and clinical aspects. [ABSTRACT FROM AUTHOR]

Aimed at developing lead-free magnetoelectric (ME) composites with performances as good as lead (Pb)-based ones, this study employed (001) and (011) oriented 82BaTiO3-10BaZrO3-8CaTiO3 (BZT-BCT) piezoelectric single crystals, fabricated by the cost-effective solid-state single crystal growth (SSCG) method, in combination with inexpensive, magnetostrictive base metal Nickel (Ni). The off-resonance, direct ME coupling in the prepared Ni/BZT-BCT/Ni laminate composites was found to be strongly dependent on the crystallographic orientation of the BZT-BCT single crystals, as well as the applied magnetic field direction. Larger and anisotropic ME voltage coefficients were observed for the composite made using the (011) oriented BZT-BCT single crystal. The optimized ME coupling of 1 V/cm Oe was obtained from the Ni/(011) BZT-BCT single crystal/Ni composite, in the d32 mode of the single crystal, when a magnetic field was applied along its [100] direction. This performance is similar to that reported for the Ni/Pb(Mg1/3Nb2/3)O3-Pb(Zr,Ti)O3 (PMN-PZT) single crystal/Ni, but larger than that obtained from the Ni/Pb(Zr,Ti)O3 ceramic/Ni composites. The results of this work demonstrate that the use of lead-free piezoelectric single crystals with special orientations permits the selection of desired anisotropic properties, enabling the realization of customized ME effects in composites. [ABSTRACT FROM AUTHOR]

An improved magnetic energy harvesting with magneto‐mechano‐electric (MME) generator is demonstrated by low‐loss piezoelectric single‐crystal fibers composite to realize a self‐powered electronics. The low‐loss MME generator can generate voltage of 94 Vpp and current of 120 μA (corresponding to an output root mean square power density of 2.1 mW cm−3). [ABSTRACT FROM AUTHOR]

By tailoring the truncated shape of a cantilever structured magneto-mechano-electric (MME) generator that is composed of a piezoelectric single crystal fiber composite and a magnetostrictive Ni plate, a superior output harvesting power density of over 680% was obtained as compared to a typical rectangular shaped generator. The effect of the MME generator's shape on the strain distribution induced by magnetostriction and vibration characteristics and harvesting properties were simulated by finite element analysis modeling and confirmed experimentally, respectively. The truncated shape was effective for not only utilizing a more uniform in-plane strain distribution in the active piezoelectric area but also magnifying the flexural vibration amplitude, which in turn can make the generator more powerful under tiny magnetic oscillations. [ABSTRACT FROM AUTHOR]

This study demonstrates the modulation of off-resonance magnetoelectric ( ME) response of the Pb(Zr,Ti)O3 ( PZT)/ Metglas (Fe BSi) bilayered composite by laser annealing. A continuous-wave 532 nm Nd: YAG laser with varying fluences (210-390 J/mm2) was utilized to anneal the 2 μm thick PZT film deposited using granule spray in vacuum ( GSV) technique on magnetostrictive amorphous Metglas foil. It was found that the dielectric and ferroelectric properties of the PZT film are strongly affected by the exposure to laser fluence. The ME voltage coefficient of PZT/Metglas increased with the fluence up to 345 J/mm2, reaching a high value of 880 mV/cm·Oe. The electrical and ME properties were correlated with the changes observed in crystallinity and grain size of the PZT film as well as with the alterations in microstructure and magnetic behavior of Metglas. Our results demonstrate that enhanced ME coupling can be realized in PZT/Metglas film composites by controlling the laser fluence. [ABSTRACT FROM AUTHOR]

A highly dense, 4 lm-thick Pb(Zr,Ti)O3 (PZT) film is deposited on amorphous magnetostrictive Metglas foil (FeBSi) by granule spray in vacuum process at room temperature, followed by its localized annealing with a continuous-wave 560 nm ytterbium fiber laser radiation. This longerwavelength laser radiation is able to anneal the whole of thick PZT film layer without any deteriorative effects, such as chemical reaction and/or atomic diffusion, at the interface and crystallization of amorphous Metglas substrate. Greatly enhanced dielectric and ferroelectric properties of the annealed PZT are attributed to its better crystallinity and grain growth induced by laser irradiation. As a result, a colossal off-resonance magnetoelectric (ME) voltage coefficient that is two orders of magnitude larger than previously reported output from PZT/Metglas film-composites is achieved. The present work addresses the problems involved in the fabrication of PZT/Metglas filmcomposites and opens up emerging possibilities in employing piezoelectric materials with low thermal budget substrates (suitable for integrated electronics) and designing laminate composites for ME based devices. [ABSTRACT FROM AUTHOR]

Dielectric capacitors, which store electrical energy in the form of an electrostatic field via dielectric polarization, are used in pulsed power electronics due to their high power density and ultrashort discharge time. In pursuit of developing high‐performance dielectric capacitors, special attention has been given to the improvement of their energy density and storage efficiency, which would make them useful for an even wider variety of applications. Among the different dielectric materials studied so far, including polymers, glasses, and both bulk and film‐based ceramics, dielectric ceramic films, which are of particular interest for miniature power electronics and mobile platforms, have demonstrated the greatest energy storage performances. In this regard, several interesting approaches involving physical, chemical, and microstructural modifications of the dielectric ceramic films are adopted. In addition to a brief discussion of the polymers, glasses, and ceramics used in dielectric capacitors and key parameters related to their energy storage performance, this review article presents a comprehensive overview of the numerous efforts made toward enhancing the energy storage properties of linear dielectric, paraelectric, ferroelectric, relaxor ferroelectric, and anti‐ferroelectric ceramic films for their applications in pulsed power capacitors. Dielectric capacitors, which store energy in the form of an electrostatic field and release it in an extremely short period of time to create intense power pulses, have applications in pulsed power electronics used in various commercial, civilian, and military systems. Significant progress has been made toward the development of dielectric ceramic film capacitors with high energy storage performance. [ABSTRACT FROM AUTHOR]