14 results on '"Pellegrino, Anna Lucia"'
Search Results
2. Abatement of Volatile Organic Compounds Employing a Thermoplastic Nano‐Photocatalyst Layered on a Glass Reactor.
- Author
-
Vento, Fabiana, Nicosia, Angelo, Fiorenza, Roberto, Scirè, Salvatore, Pellegrino, Anna Lucia, Mezzina, Lidia, Raciti, Giulia, and Mineo, Placido
- Subjects
VOLATILE organic compounds ,ENERGY dispersive X-ray spectroscopy ,ACETONE ,ETHANOL ,FIELD emission electron microscopy - Abstract
Industrial development and urbanization have increased the emission of Volatile Organic Compounds (VOCs) into the atmosphere, causing environmental and health risks. Several approaches are used for their abatement, including chemical, thermo‐ and photo‐catalytic oxidations, but they are not fully satisfactory. In this work, a thermoplastic TiO2‐based photo‐catalyst was used as a coating layer of a glass‐reactor. Solar‐triggered photocatalytic degradation of ethanol, toluene, and acetone (used as model VOCs) highlights the better performance of the coated photoreactor than that of TiO2 nanopowder. The influence of the pollutant flow rate on the photodegradation performance of the system was also investigated, revealing an inverse relationship between degradation and flow rates. The experimental data suggest that our approach provides a cost‐effective and efficient way to boost the abatement of VOCs, useful for further industrial‐scale applications. The morphology and the compositional homogeneity of the nanocomposite coating were addressed through Field Emission Scanning Electron Microscopy coupled with Energy Dispersive X‐ray Analysis. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
3. Highly stable CsPbBr3 perovskite phases from new lead β-diketonate glyme adducts.
- Author
-
Sirna, Lorenzo, Pellegrino, Anna Lucia, Sciacca, Salvatore Pio, Lippi, Martina, Rossi, Patrizia, Bonaccorso, Carmela, Bengasi, Giuseppe, Foti, Marina, and Malandrino, Graziella
- Subjects
PEROVSKITE ,LEAD ,ENERGY dispersive X-ray spectroscopy ,FIELD emission electron microscopy ,OPTICAL spectroscopy ,CESIUM ions ,DIFFERENTIAL scanning calorimetry - Abstract
Lead is one of the key metals of the all-inorganic lead halide perovskites. This work tailors novel architectures of lead's coordination sphere using a β-diketone (H-hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedione) and a glyme (monoglyme, diglyme, triglyme, or tetraglyme) ligand. The coordination chemistry and thermal behaviour of these "Pb(hfa)
2 ·glyme" adducts have been analysed through FT-IR spectroscopy,1 H and13 C NMR analyses, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Single-crystal X-ray diffraction studies provide evidence of the formation of a monomeric Pb(hfa)2 ·monoglyme structure. In order to validate the potentiality of these "Pb(hfa)2 ·glyme" precursors for the fabrication of Pb-based halide perovskites, a facile, one-step and low-temperature solution approach has been applied to prepare CsPbBr3 microcrystals with a process carried out in air under atmospheric pressure. Pure stoichiometric CsPbBr3 powders, obtained using Cs(hfa) and Br2 as cesium and bromide sources, respectively, show excellent stability under atmospheric conditions. Better results are obtained in terms of yield and stability from the diglyme and tetraglyme lead adducts. Field emission scanning electron microscopy (FE-SEM) indicates a good uniform morphology of cubic grains, while the structure and the 1 : 1 : 3 stoichiometry of Cs : Pb : Br are confirmed by X-ray diffraction (XRD) and energy dispersive X-ray analysis (EDX), respectively. Tauc plots derived from absorption spectroscopy point to optical energy band-gaps (Eg ) in the 2.21–2.27 eV range, in agreement with literature data. The present research elucidates the potential of these novel "Pb(hfa)2 ·glyme" adducts as promising lead precursors for CsPbBr3 perovskite synthesis, paving the way for their implementation in various technological applications. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
4. LiNbO 3 Thin Films through a Sol–Gel/Spin-Coating Approach Using a Novel Heterobimetallic Lithium–Niobium Precursor.
- Author
-
Lo Presti, Francesca, Pellegrino, Anna Lucia, Micard, Quentin, Condorelli, Guglielmo Guido, Margueron, Samuel, Bartasyte, Ausrine, and Malandrino, Graziella
- Subjects
THIN films ,ENERGY dispersive X-ray spectroscopy ,ATTENUATED total reflectance ,LITHIUM niobate ,RAMAN spectroscopy ,X-ray photoelectron spectroscopy - Abstract
Lithium niobate is a lead-free material which has attracted considerable attention due to its excellent optical, piezoelectric, and ferroelectric properties. This research is devoted to the synthesis through an innovative sol–gel/spin-coating approach of polycrystalline LiNbO
3 films on Si substrates. A novel single-source hetero-bimetallic precursor containing lithium and niobium was synthesized and applied to the sol–gel synthesis. The structural, compositional, and thermal characteristics of the precursor have been tested through attenuated total reflection, X-ray photoelectron spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The LiNbO3 films have been characterized from a structural point of view with combined X-ray diffraction and Raman spectroscopy. Field-emission scanning electron microscopy, energy dispersive X-ray analysis, and X-ray photoelectron spectroscopy have been used to study the morphological and compositional properties of the deposited films. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
5. Fabrication of Europium-Doped CaF 2 Films via Sol-Gel Synthesis as Down-Shifting Layers for Solar Cell Applications.
- Author
-
Pellegrino, Anna Lucia, Milan, Emil, Speghini, Adolfo, and Malandrino, Graziella
- Subjects
SOLAR cells ,ENERGY dispersive X-ray spectroscopy ,FIELD emission electron microscopy ,LUMINESCENCE measurement ,THIN films - Abstract
In the present work, an in-depth study on the sol-gel process for the fabrication of Eu-doped CaF
2 materials in the form of thin films has been addressed for the production of down-shifting layers. Fine-tuning of the operative parameters, such as the annealing temperature, substrate nature and doping ion percentage, has been finalized in order to obtain Eu(III)-doped CaF2 thin films via a reproducible and selective solution process for down-shifting applications. An accurate balance of such parameters allows for obtaining films with high uniformity in terms of both their structural and compositional features. The starting point of the synthesis is the use of a mixture of Ca(hfa)2 •diglyme•H2 O and Eu(hfa)3 •diglyme adducts, with a suited ratio to produce 5%, 10% and 15% Eu-doped CaF2 films, in a water/ethanol solution. A full investigation of the structural, morphological and compositional features of the films, inspected using X-ray diffraction analysis (XRD), field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray analysis (EDX), respectively, has stated a correlation between the annealing temperature and the structural characteristics and morphology of the CaF2 thin films. Interestingly, crystalline CaF2 films are obtained at quite low temperatures of 350–400 °C. The down-shifting properties, validated by taking luminescence measurements under UV excitation, have allowed us to correlate the local environment in terms of the degree of symmetry around the europium ions with the relative doping ion percentages. [ABSTRACT FROM AUTHOR]- Published
- 2023
- Full Text
- View/download PDF
6. Eu3+ activated BaF2 nanostructured thin films: fabrication and a combined experimental and computational study of the energy conversion process.
- Author
-
Lo Presti, Francesca, Pellegrino, Anna Lucia, Milan, Emil, Radicchi, Eros, Speghini, Adolfo, and Malandrino, Graziella
- Abstract
Significant work has recently focused on developing novel materials suitable for solar technologies with better conversion efficiencies, while maintaining low costs. BaF
2 has been investigated as a fluoride host for doping with luminescent ions for energy conversion processes in photovoltaic cells. This work employed a metal–organic chemical vapor deposition technique to prepare nanostructured europium-doped BaF2 thin films on silicon and quartz substrates. Samples have been fabricated by varying the deposition temperature from 300 to 600 °C in order to examine how temperature affects the structure, morphology, and luminescence of Eu-doped BaF2 thin films. A multicomponent combination of fluorinated β-diketonate metal–organic precursors of barium and europium, Ba(hfa)2 ·tetraglyme and Eu(hfa)3 ·diglyme, in an appropriate molar ratio, is employed to fabricate BaF2 based thin films. These precursors serve as a single molten source by delivering all the elements required (Ba, Eu, and F) for forming the Eu-doped BaF2 phase due to the similar nature of the ligands. On silicon substrates, preliminary deposition tests have been carried out to confirm the purity, homogeneity, and appropriate stoichiometry of films. The obtained results pave the way for the production of BaF2 thin films doped with lanthanide ions, particularly interesting for their up-conversion (UC), down-conversion (DC), and down-shifting (DS) properties. [ABSTRACT FROM AUTHOR]- Published
- 2023
- Full Text
- View/download PDF
7. Highly Tunable MOCVD Process of Vanadium Dioxide Thin Films: Relationship between Structural/Morphological Features and Electrodynamic Properties.
- Author
-
Pellegrino, Anna Lucia, Lo Presti, Francesca, Papari, Gian Paolo, Koral, Can, Andreone, Antonello, and Malandrino, Graziella
- Subjects
METAL organic chemical vapor deposition ,THIN films ,VANADIUM dioxide ,TERAHERTZ spectroscopy ,SCANNING electron microscopy - Abstract
The monoclinic structures of vanadium dioxide are widely studied as appealing systems due to a plethora of functional properties in several technological fields. In particular, the possibility to obtain the VO
2 material in the form of thin film with a high control of structure and morphology represents a key issue for their use in THz devices and sensors. Herein, a fine control of the crystal habit has been addressed through an in-depth study of the metal organic chemical vapor deposition (MOCVD) synthetic approach. The focus is devoted to the key operative parameters such as deposition temperature inside the reactor in order to stabilize the P21 /c or the C2/m monoclinic VO2 structures. Furthermore, the compositional purity, the morphology and the thickness of the VO2 films have been assessed through energy dispersive X-ray (EDX) analyses and field-emission scanning electron microscopy (FE-SEM), respectively. THz time domain spectroscopy is used to validate at very high frequency the functional properties of the as-prepared VO2 films. [ABSTRACT FROM AUTHOR]- Published
- 2023
- Full Text
- View/download PDF
8. Heterometallic Porphyrin Conjugated Polymer Thin Films—A Gas‐Phase Approach for the Engineering of New Fused Porphyrin Systems.
- Author
-
Pellegrino, Anna Lucia, Bengasi, Giuseppe, Baba, Kamal, Cardenas‐Morcoso, Drialys, Bansal, Deepak, Malandrino, Graziella, and Boscher, Nicolas D.
- Subjects
METALLOPORPHYRINS ,CONJUGATED polymers ,THIN films ,POLYMER films ,PORPHYRINS ,CHEMICAL engineering ,CHEMICAL vapor deposition - Abstract
For the first time, the simultaneous synthesis and deposition of heterometallic porphyrin conjugated polymer thin films from a simple and scalable gas‐phase approach are reported. The oxidative chemical vapor deposition (oCVD) reaction of 5,15‐(diaryl) porphyrins chelated with different metal cations (M = Co(II), Ni(II), Zn(II), Cu(II), Pd(II)) readily yields the formation of new hetero‐metalated fused porphyrin tapes, such as evidenced by in‐depth high‐resolution mass spectrometry studies. The impact of the coreactants on the regioselectivity of the intermolecular dehydrogenative coupling reaction and the formation of double or triple bonds between the porphyrin units is demonstrated. The oCVD reaction of multiple porphyrins brings the possibility to easily engineer the chemical features and the electronic and optoelectronic properties of these highly conjugated porphyrin polymers. Particularly, it is demonstrated that porphyrin conjugated polymers having different chelated metal cations can achieve higher electrical conductivities and promote narrower bandgaps. The gas‐phase approach presented herein overcomes the main limitations of the conventional solution‐based approaches and opens the path to the engineering of a novel class donor–acceptor heterometallic polymers with high interest in several fields including multimetallic electrocatalysis, photocatalysis, sensing, and nonlinear optics applications. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
9. Luminescent 1,10-Phenanthroline β-Diketonate Europium Complexes with Large Second-Order Nonlinear Optical Properties.
- Author
-
Fagnani, Francesco, Colombo, Alessia, Malandrino, Graziella, Dragonetti, Claudia, and Pellegrino, Anna Lucia
- Subjects
EUROPIUM ,OPTICAL properties ,SECOND harmonic generation ,NONLINEAR optics - Abstract
Substitution of the diglyme ligand of [Eu(hfa)
3 (diglyme)] (where hfa is hexafluoroacetylacetonate) with a simple 1,10-phenanthroline leads to a six-fold increase of the product μβEFISH , as measured by the Electric-Field-Induced Second Harmonic generation (EFISH) technique. Similarly, [Eu(tta)3 (1,10-phenanthroline)] (where Htta is 2-thenoyltrifluoroacetone) is characterized by a large second-order NLO response. Both 1,10-phenanthroline europium complexes have great potential as multifunctional materials for photonics. [ABSTRACT FROM AUTHOR]- Published
- 2022
- Full Text
- View/download PDF
10. Molecular Engineering of Porphyrin‐Tapes/Phthalocyanine Heterojunctions for a Highly Sensitive Ammonia Sensor.
- Author
-
Bengasi, Giuseppe, Meunier‐Prest, Rita, Baba, Kamal, Kumar, Abhishek, Pellegrino, Anna Lucia, Boscher, Nicolas D., and Bouvet, Marcel
- Subjects
PHYSICAL vapor deposition ,AMMONIA ,CHEMICAL vapor deposition ,MOLECULAR orientation ,METALLOPORPHYRINS ,CURRENT-voltage characteristics ,METAL phthalocyanines - Abstract
Modulating the interfacial charge alignments by molecular engineering in an organic heterojunction device is a smart strategy to improve its conductivity, which can be exploited in high‐performance gas‐sensor development. Herein, the fabrication of new organic heterojunction devices based on porphyrin tapes and phthalocyanines and their potentiality in ammonia sensing at different relative humidity (rh) are investigated. The devices are built using dry approach relying on oxidative chemical vapor deposition for simultaneous synthesis, doping, and deposition of the porphyrin tape layer and physical vapor deposition of phthalocyanine layer. The association of the porphyrin tapes with copper phthalocyanine (CuPc) or its perfluorinated analogue (Cu(F16Pc)) in a bilayer device configuration reveals a nonlinear current–voltage characteristic, assigned to the formation of organic heterojunction at the bilayer interface. Cu(F16Pc)‐based devices reveal higher response, faster sorption kinetics, stable baseline, and less interference from rh fluctuations toward ammonia than CuPc‐based devices, which are attributed to more conducting interface in the former. Moreover, depending on the porphyrin tape associated, Cu(F16Pc)‐based devices exhibit sensitivity values 6.7 or 0.4% ppm−1 and detection limit of 1 ppm or 228 ppb allowing to obtain among the best NH3 sensors reported. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
11. Energy conversion systems: Molecular architecture engineering of metal precursors and their applications to vapor phase and solution routes.
- Author
-
Pellegrino, Anna Lucia, Lucchini, Giacomo, Speghini, Adolfo, and Malandrino, Graziella
- Published
- 2020
- Full Text
- View/download PDF
12. Development of superhydrophobic, self-cleaning, and flame-resistant DLC/TiO2 melamine sponge for application in oil–water separation.
- Author
-
Toro, Roberta G., Calandra, Pietro, Federici, Fulvio, de Caro, Tilde, Mezzi, Alessio, Cortese, Barbara, Pellegrino, Anna Lucia, Malandrino, Graziella, and Caschera, Daniela
- Subjects
SURFACE energy ,SPONGE (Material) ,DIAMOND-like carbon ,ORGANIC solvents ,VISIBLE spectra ,MELAMINE - Abstract
Increasing awareness of environmental concerns has strongly pushed the scientific community towards the search for new solutions for efficient removal of oils and organic solvents from water. Here, we report the preparation of multifunctional TiO
2 -coated melamine-formaldehyde (MF) sponges as absorbent material for oils and organic solvents in water. TiO2 -coated MF sponges were fabricated through an environmentally friendly approach, consisting in a simple immersion of the sponge into an oleic acid-capped TiO2 nanoparticles dispersion. The adhesion of TiOle coating to the sponge was then improved by the deposition of a low surface energy diamond-like carbon (DLC) thin layer. Our results highlighted that the modified MF sponges possess superhydrophobic and oleophilic behaviour, inertness to corrosive environment, good durability and reusability. Furthermore, the superhydrophobic DLC/TiO2 @sponges showed (1) novel self-cleaning properties towards an absorbed commercial organic dye (IR-270BKA, chosen as representative) under visible light irradiation and (2) enhanced flame-retardant behaviour respect to the pristine MF sponge. These findings point out an important added value of DLC/TiOle@sponges making them promising candidates for wastewater treatments. [ABSTRACT FROM AUTHOR]- Published
- 2020
- Full Text
- View/download PDF
13. Optimization of Oxygen Evolution Reaction with Electroless Deposited Ni–P Catalytic Nanocoating.
- Author
-
Battiato, Sergio, Urso, Mario, Cosentino, Salvatore, Pellegrino, Anna Lucia, Mirabella, Salvo, and Terrasi, Antonio
- Subjects
CATALYSTS ,OXYGEN evolution reactions ,NANOCOATINGS ,WATER electrolysis ,HYDROGEN evolution reactions ,ELECTROLESS plating ,WATER efficiency ,METAL catalysts - Abstract
The low efficiency of water electrolysis mostly arises from the thermodynamic uphill oxygen evolution reaction. The efficiency can be greatly improved by rationally designing low-cost and efficient oxygen evolution anode materials. Herein, we report the synthesis of Ni–P alloys adopting a facile electroless plating method under mild conditions on nickel substrates. The relationship between the Ni–P properties and catalytic activity allowed us to define the best conditions for the electroless synthesis of highperformance Ni–P catalysts. Indeed, the electrochemical investigations indicated an increased catalytic response by reducing the thickness and Ni/P ratio in the alloy. Furthermore, the Ni–P catalysts with optimized size and composition deposited on Ni foam exposed more active sites for the oxygen evolution reaction, yielding a current density of 10 mA cm
−2 at an overpotential as low as 335 mV, exhibiting charge transfer resistances of only a few ohms and a remarkable turnover frequency (TOF) value of 0.62 s−1 at 350 mV. The present study provides an advancement in the control of the electroless synthetic approach for the design and large-scale application of high-performance metal phosphide catalysts for electrochemical water splitting. [ABSTRACT FROM AUTHOR]- Published
- 2021
- Full Text
- View/download PDF
14. Polymer-Based Graphene Derivatives and Microwave-Assisted Silver Nanoparticles Decoration as a Potential Antibacterial Agent.
- Author
-
Nicosia, Angelo, Vento, Fabiana, Pellegrino, Anna Lucia, Ranc, Vaclav, Piperno, Anna, Mazzaglia, Antonino, and Mineo, Placido
- Subjects
SILVER nanoparticles ,ENERGY dispersive X-ray spectroscopy ,FIELD emission electron microscopy ,ANTIBACTERIAL agents ,ATOMIC force microscopy ,NANOCOMPOSITE materials - Abstract
Nanocomposites obtained by the decoration of graphene-based materials with silver nanoparticles (AgNPs) have received increasing attention owing to their antimicrobial activity. However, the complex synthetic methods for their preparation have limited practical applications. This study aims to synthesize novel NanoHybrid Systems based on graphene, polymer, and AgNPs (namely, NanoHy-GPS) through an easy microwave irradiation approach free of reductants and surfactants. The polymer plays a crucial role, as it assures the coating layer/substrate compatibility making the platform easily adaptable for a specific substrate. AgNPs' loading (from 5% to 87%) can be tuned by the amount of Silver salt used during the microwave-assisted reaction, obtaining spherical AgNPs with average sizes of 5–12 nm homogeneously distributed on a polymer-graphene nanosystem. Interestingly, microwave irradiation partially restored the graphene sp
2 network without damage of ester bonds. The structure, morphology, and chemical composition of NanoHy-GPS and its subunits were characterized by means of UV-vis spectroscopy, thermal analysis, differential light scattering (DLS), Field Emission Scanning Electron Microscopy (FE-SEM), Energy Dispersive X-ray analysis (EDX), Atomic Force Microscopy (AFM), and High-Resolution Transmission Electron Microscopy (HRTEM) techniques. A preliminary qualitative empirical assay against the typical bacterial load on common hand-contacted surfaces has been performed to assess the antibacterial properties of NanoHy-GPS, evidencing a significative reduction of bacterial colonies spreading. [ABSTRACT FROM AUTHOR]- Published
- 2020
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.