Search

Comprehensive Summary: We herein describe a Cp*RhIII‐catalyzed C(sp3)–H mono‐arylation of 8‐methylquinolines with benign arylsilanes. The use of 1‐adamantane carboxylic acid can benefit the efficiency in this transformation, and AgF was both activator and reoxidant. Control experiments indicated inability of C—H cleavage in determining the rate of the reaction. [ABSTRACT FROM AUTHOR]

Flotation is one of the most used methods to upgrade natural graphite resources. However, the efficiency is usually decreased due to the entrainment of undesirable fine gangue minerals. In this work, the impact of different factors such as particle size, pulp density, and flotation reagent on the entrainment of mica and quartz in a flake graphite flotation was studied. The single gangue mineral flotation results showed increased gangue entrainment when reducing the particle size of gangue minerals and increasing the pulp density. Moreover, the flotation of artificial mixtures indicated enhanced entrainment of mica and quartz in the presence of graphite particles. The collector and frother also strongly affect gangue entrainment by modifying the structure and stability of the froth. Kerosene, which has a prominent deforming feature, can reduce gangue entrainment more effectively than diesel. [ABSTRACT FROM AUTHOR]

In the flotation of semi-soluble minerals such as calcite and fluorite, Ca2+ is one of the common dissolved components influencing the collector adsorption behaviors on the mineral surfaces. However, there is very limited research focusing on how the dissolved Ca2+ affects the separation of fluorite and calcite. In the study, with sodium oleate (NaOL) as a collector and tannic acid (TA) as a depressant, a flotation test, zeta potential measurement, and adsorption experiment in the presence of Ca2+ were conducted. Flotation tests indicated that in the presence of Ca2+, fluorite and calcite were both significantly depressed by TA, leading to difficulty in the separation of the two minerals. It was also found that the depression effect on fluorite flotation was minimized with a high concentration of NaOL. Zeta potential measurement and the adsorption experiment results are consistent with the flotation results, revealing that it is only in the low concentration of NaOL that the flotation of fluorite was depressed by TA in the presence of Ca2+. Specifically, in the low concentration of NaOL, TA adsorbed on the fluorite surface and depressed the flotation of fluorite due to the preferential interaction between NaOL and Ca2+ in the solution leading to a shortage in the effective NaOL in the solution. In the high concentration of NaOL, the adsorbed TA on the fluorite surface was displaced by the excessive NaOL in the solution; hence, the flotation of fluorite was recovered. In contrast, TA always hinders the interaction of NaOL with calcite regardless of the presence and absence of Ca2+ and NaOL, hence, depressing the flotation of calcite. The study presented that a high concentration of NaOL may mitigate the negative effect of Ca2+ on the fluorite surface and improve the separation of fluorite from calcite. [ABSTRACT FROM AUTHOR]

This investigation aims to demonstrate the effects of hydrophobic tails on the affinity and relevant flotation response of sulfonate-based collectors for fluorite. For this purpose, a series of alkyl sulfonates with different hydrophobic tails, namely sodium decanesulfonate (C10), sodium dodecylsulfate (C12), sodium hexadecanesulfonate (C16), and sodium dodecylbenzenesulfonate (C12B) were applied. The flotation tests showed that C12 and C12B had a better collecting performance than C10 and C16 at pH < 10, and the flotation recovery of fluorite was higher when adopting C12B as a collector compared with C12 with a strong base. The adsorption behaviors of collectors on the fluorite surface were studied through zeta potential, Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) analyses. It was found that the affinity of alkyl sulfonates for fluorite was enhanced with the increase of the alkyl chain length from C10 to C16. The existence of phenyl in the hydrophobic tail of sulfonates could improve its activity for fluorite by reducing its surface tension. The abnormal phenomenon C16 with a high affinity for fluorite had a low collecting performance for fluorite mainly due to its overlong alkyl chain, resulting in low solubility in pulp, which restrained its interaction with fluorite. We concluded that C12B was the most applicable collector for fluorite among these reagents due to its high activity, high solubility, and low cost, which was further substantiated by calculating their molecular frontier orbital energy. [ABSTRACT FROM AUTHOR]