Search

Air in the headspace of sewer laterals can be driven by the flowing sewage as well as air pressure. In this study, the openings on manholes for air flow are approximated as a thin continuous slot at the laterals. In this way, the governing equations can be solved analytically for infinitely long laterals without water flow. For cases with water flow, a numerical solution is developed. It is found that the air flow pattern in a long lateral can be categorized into three zones. The zone closest to the trunk is defined as the "zone of influence," where the air flow in the lateral is dominated by air pressure, and the air pressure and air velocity decay exponentially in the lateral. The second zone is named as "zone of equilibrium" where the air pressure gradient is zero and the air flow is only driven by the drag of water and can be calculated analytically. The air flow zone farthest from the trunk is defined as the "zone of induction" where the air is inducted into the system for mass balance in the system. An explicit fitting expression on the air velocity and water velocity in a long lateral is provided. A graphic solution for air velocity and zone of influence is also developed for a quick estimation on the air movement in sewer laterals. [ABSTRACT FROM AUTHOR]

Knowledge of the build-up and erosion behaviour of sewer sediment is necessary to facilitate better sediment management strategies. The dynamic behaviours of sediment in specific deep combined sewer overflow (CSO) chambers in Liuzhou, China, were studied through a field investigation in this paper. The results presented show that the chambers suffered from sediment problems of varying severity, and the severity depends on the dry weather flow rate. The sediment layers in chambers reached a certain balance with dry and wet weather flow rate, respectively. It can be classified as irreversible and reversible according to its mobility. The former has a low environmental impact because of its limited mobility and low organic content, and its increasing rate is extremely low year by year, whereas the latter has a highly pollutant content, and is the major cause of sewer odour and CSO pollution. The removal of this layer is seen to be a very important aspect of sewer sediment management. [ABSTRACT FROM AUTHOR]

It is well known that model-building of chlorine decay in real water distribution systems is difficult because chlorine decay is influenced by many factors (e.g., bulk water demand, pipe-wall demand, piping material, flow velocity, and residence time). In this paper, experiments were run to investigate the kinetic model of chlorine decay and the formation model of trihalomethanes (THMs) in pilot-scale water distribution systems. Experimental results show that the rate constants of chlorine decay, including wall decay and bulk decay, increasing with temperature. Moreover, the kinetic model of chlorine decay and the formation model of THMs describe experiment data of pilot-scale water distribution systems. The effect of different piping material on chlorine decay and THMs formation were also investigated. The rate constants of chlorine decay are ranked in order: stainless steel pipe, ductile iron pipe, and last, polyethelene pipe because wall decay is the largest in stainless steel pipe than that in other piping material. Correspondingly, the rate of THMs formation follows the order of stainless steel pipe, ductile iron pipe, and last, polyethelene pipe because of less chlorine in bulk water reacting with the trihalomethane formation potential (THMFP). [ABSTRACT FROM AUTHOR]