Search

Unsaturated fat replacement should be used to reduce the use of saturated fat and trans fatty acids in the diet. In this study, pea protein micro-gels (PPMs) with different structures were prepared by microparticulation at pH 4.0–7.0 and named as PPM (pH 4.0), PPM (pH 4.5), PPM (pH 5.0), PPM (pH 5.5), PPM (pH 6.0), PPM (pH 6.5), and PPM (pH 7.0). Pea protein was used as a control to evaluate the structure and interfacial properties of PPMs by particle size distribution, Fourier transform infrared spectroscopy (FTIR), free sulfhydryl group content, and emulsifying property. PPM (pH 7.0) was suitable for application in O/W emulsion stabilization because of its proper particle size, more flexible structure, high emulsifying activity index (EAI) and emulsifying stability index (ESI). The Pickering emulsion stabilized by PPM (pH 7.0) had a uniform oil droplet distribution and similar rheological properties to cream, so it can be used as a saturated fat replacement in the manufacture of ice cream. Saturated fat was partially replaced at different levels of 0%, 20%, 40%, 60%, 80%, and 100%, which were respectively named as PR0, PR20, PR40, PR60, PR80, and PR100. The rheological properties, physicochemical indexes, and sensory properties of low-saturated fat ice cream show that PPM (pH 7.0)-stabilized emulsion can be used to substitute 60% cream to manufacture low-saturated fat ice cream that has high structural stability and similar melting properties, overrun, and sensory properties to PR0. The article shows that it is feasible to prepare low-saturated fat ice cream with PPM (pH 7.0)-stabilized Pickering emulsion, which can not only maintain the fatty acid profile of the corn oil used, but also possess a solid-like structure. Its application is of positive significance for the development of nutritious and healthy foods and the reduction of chronic disease incidence. [ABSTRACT FROM AUTHOR]

Due to its poor stability and rapid metabolism, the biological activity and absorption of epigallocatechin gallate (EGCG) is limited. In this work, EGCG-loaded bovine serum albumin (BSA)/pullulan (PUL) nanoparticles (BPENs) were successfully fabricated via self-assembly. This assembly was driven by hydrogen bonding, which provided the desired EGCG loading efficiency, high stability, and a strong antioxidant capacity. The encapsulation efficiency of the BPENs was above 99.0%. BPENs have high antioxidant activity in vitro, and, in this study, their antioxidant capacity increased with an increase in the EGCG concentration. The in vitro release assays showed that the BPENs were released continuously over 6 h. The Fourier transform infrared spectra (FTIR) analysis indicated the presence of hydrogen bonding, hydrophobic interactions, and electrostatic interactions, which were the driving forces for the formation of the EGCG carrier nanoparticles. Furthermore, the transmission electron microscope (TEM) images demonstrated that the BSA/PUL-based nanoparticles (BPNs) and BPENs both exhibited regular spherical particles. In conclusion, BPENs are good delivery carriers for enhancing the stability and antioxidant activity of EGCG. [ABSTRACT FROM AUTHOR]

Chitosan (CS) and pea protein isolate (PPI) were used as raw materials to prepare nanoparticles. The structures and functional properties of the nanoparticles with three ratios (1:1, 1:2 1:3, CS:PPI) were evaluated. The particle sizes of chitosan–pea protein isolate (CS–PPI) nanoparticles with the ratios of 1:1, 1:2, and 1:3 were 802.95 ± 71.94, 807.10 ± 86.22, and 767.75 ± 110.10 nm, respectively, and there were no significant differences. Through the analysis of turbidity, endogenous fluorescence spectroscopy and Fourier transform infrared spectroscopy, the interaction between CS and PPI was mainly caused by electrostatic mutual attraction and hydrogen bonding. In terms of interface properties, the contact angles of nanoparticles with the ratio of 1:1, 1:2, and 1:3 were 119.2°, 112.3°, and 107.0°, respectively. The emulsifying activity (EAI) of the nanoparticles was related to the proportion of protein. The nanoparticle with the ratio of 1:1 had the highest potential and the best thermal stability. From the observation of their morphology by transmission electron microscopy, it could be seen that the nanoparticles with a ratio of 1:3 were the closest to spherical. This study provides a theoretical basis for the design of CS–PPI nanoparticles and their applications in promoting emulsion stabilization and the delivery of active substances using emulsions. [ABSTRACT FROM AUTHOR]

Background: Soil salinity is a primary factor limiting soybean (Glycine max) productivity. Breeding soybean for tolerance to high salt conditions is therefore critical for increasing yield. To explore the molecular mechanism of soybean responses to salt stress, we performed a comparative transcriptome time-series analysis of root samples collected from two soybean cultivars with contrasting salt sensitivity. Results: The salt-tolerant cultivar 'Qi Huang No.34' (QH34) showed more differential expression of genes than the salt-sensitive cultivar 'Dong Nong No.50' (DN50). We identified 17,477 genes responsive to salt stress, of which 6644 exhibited distinct expression differences between the two soybean cultivars. We constructed the corresponding co-expression network and performed Gene Ontology term and Kyoto Encyclopedia of Genes and Genomes pathway enrichment analysis. The results suggested that phytohormone signaling, oxidoreduction, phenylpropanoid biosynthesis, the mitogen-activated protein kinase pathway and ribosome metabolism may play crucial roles in response to salt stress. Conclusions: Our comparative analysis offers a comprehensive understanding of the genes involved in responding to salt stress and maintaining cell homeostasis in soybean. The regulatory gene networks constructed here also provide valuable molecular resources for future functional studies and breeding of soybean with improved tolerance to salinity. [ABSTRACT FROM AUTHOR]

Sweet cherry (Prunus avium L.), one of the most appreciated and most important commercial temperate fruits, has high sensory quality and nutritional value. Investigating its metabolic variations provides valuable information on the formation of fruit quality. In this study, widely targeted LC-MS/MS based metabolomics was used to identify and quantify metabolic changes during 'Black Pearl' sweet cherry development and ripening. A total of 263 significant differentially expressed metabolites (DEMs) were detected during the four fruit-development stages. Significant differences were observed in the composition and content of compounds in the four stages of cherry development, especially sugars, organic acids, and flavonoids. Moreover, transcriptome analysis provided a molecular basis for metabolic variations during fruit development. A total of 6724 significant differentially expressed genes (DEGs) were identified. Further correlation analysis of major DEMs and DEGs showed that 19 key DEGs were involved in sugar metabolism, 23 key DEGs in organic acid metabolism, and 13 key DEGs in flavonoid metabolism. The upregulated genes involved in the flavonoid pathway probably play an important role in regulating the rapid increase of anthocyanin content during fruit development. These comprehensive analysis data provide a better understanding to improve fruit quality traits based on molecular and metabolic levels. [ABSTRACT FROM AUTHOR]

As traditional edible fungi, Monascus spp. have been widely used as folk medicine, food colorants, and fermentation starters in East Asian countries for more than a thousand years. However, the presence of citrinin, which has nephrotoxic, hepatotoxic, and carcinogenic activities, raises suspicions about the safety of Monascus products. Citrinin biosynthesis in Monascus is known to occur via a polyketide pathway and a citrinin biosynthesis gene cluster, which include the characterized polyketide synthetase pksCT. A gene, orf6, encodes a protein that shows significant similarity to glyoxalase and is located between ctnE and orf1. This study analyzed orf6 function, and successfully obtained an orf6 disruption strain (Δ orf6). Citrinin production was significantly greater (3.6-fold) in the Δ orf6 strain than in the wild-type Monascus purpureus YY-1, and RT-PCR analysis further revealed increased expression of numerous genes of the citrinin biosynthesis gene cluster in Δ orf6. Therefore, orf6 proved to be a major inhibitor, directly involved in citrinin biosynthesis. Moreover, pigment production in Δ orf6 was reduced by approximately 30%, while the transcription levels of many genes involved in Monascus pigments (MPs) biosynthesis had increased. This dichotomy indicated that MPs and citrinin yields may be improved simultaneously; however, a portion of the pigments was consumed to protect the cells from oxidative damage in the Δ orf6 strain . An Δ orf6 revertant restored the citrinin and pigment yields to normal levels. This study makes a contribution to explore the citrinin biosynthesis pathway and provides some theoretical guidance to improving the safety of Monascus-related products. [ABSTRACT FROM AUTHOR]

Microparticulated proteins (MPPs) considerably improve the texture, taste and nutritional value of low-fat dairy products. A combination of superfine grinding and heat-shearing treatment was utilized in order to improve the processing adaptability and stability of microparticulated whey protein (MWP). Comparing the mean particle sizes of WPC and MWP with the superfine milled whey protein concentrate (sWPC) and its microparticulated whey protein (sMWP), the sWPC and sMWP were significantly decreased from 49.24 and 13.09 μm to 8.17 and 5.73 μm, respectively ( P < 0.05). Both sWPC and sMWP exhibited higher water-holding capacity (1.9 and 3.69 g/g, respectively), emulsion activity index (146.38 and 128.6 m/g, respectively), emulsion stability index (29.04 and 6.31, respectively) and viscoelasticity than WPC and MWP. The dispersion stability of sWPC, sMWP and its cream mimetic were also enhanced after superfine grinding treatment. The sMWP dispersion exhibited more stable liquid behaviour characteristics and maintained the creamy mouth feel better than MWP, indicating the higher dispersion stability of sMWP-based cream mimetic. Therefore, the combined superfine grinding and heat-shearing treatment is a promising technique for the production of microparticulated proteins. [ABSTRACT FROM AUTHOR]

Effects of superfine grinding on structural and physicochemical properties of whey protein concentrate (WPC) and applications for microparticulated whey protein (MWP) were investigated. WPC and MWP particle sizes significantly ( p<0.05) decreased after superfine grinding from 62 and 15 µm to 15 and 9 µm, respectively, compared with controls. A basis for exploration of WPC applications as a fat replacer because of WPC and MWP particle size reductions due to superfine grinding is established. The effect of superfine grinding on molecular configuration, thermal stability, and physicochemical properties of WPC were also investigated. Amounts of free sulfhydryl groups decreased significantly ( p<0.05) from 18.16 to 14.49 µmol/L, and thermodynamic properties, including transition temperature, were changed after superfine grinding. The whey protein solubility, protein surface hydrophobicity, oil binding capacity, foaming capacity, and foaming stability of WPC were all improved after superfine grinding. [ABSTRACT FROM AUTHOR]

Chito-oligosaccharides (COSs) were encapsulated by the film-ultrasonic method into three nano-liposomes, which were uncoated liposomes (COSs-Lip), chitosan-coated liposomes (CH-COSs-Lip), and sodium alginate (SA)/chitosan (CH)-coated liposomes (SA/CH-COSs-Lip). The physicochemical and structural properties, as well as the stability and digestive characteristics, of all three nano-liposomes were assessed in the current study. Thereafter, the characteristics of intestinal absorption and transport of nano-liposomes were investigated by the Caco-2 cell monolayer. All nano-liposomes showed a smaller-sized distribution with a higher encapsulation efficiency. The ζ-potential, Z-average diameter (Dz), and polydispersity index (PDI) demonstrated that the stability of the SA/CH-COSs-Lip had much better stability than COSs-Lip and CH-COSs-Lip. In addition, the transport of the nano-liposomes via the Caco-2 cell monolayer indicated a higher transmembrane transport capacity. In summary, the chitosan and sodium alginate could serve as potential delivery systems for COSs to fortify functional foods and medicines. [ABSTRACT FROM AUTHOR]

Appropriate pretreatment of proteins and addition of xanthan gum (XG) has the potential to improve the stability of oil-in-water (O/W) emulsions. However, the factors that regulate the enhancement and the mechanism are still not clear, which restricts the realization of improving the emulsion stability by directional design of its structure. Therefore, the effects of whey protein micro-gel particles (WPMPs) and WPMPs-XG complexes on the stability of O/W emulsion were investigated in this article to provide theoretical support. WPMPs with different structures were prepared by pretreatment (controlled high-speed shear treatment of heat-set WPC gels) at pH 3.5–8.5. The impact of initial WPC structure and XG addition on Turbiscan Indexes, mean droplet size and the peroxide values of O/W emulsions was investigated. The results indicate that WPMPs and XG can respectively inhibit droplet coalescence and gravitational separation to improve the physical stability of WPC-stabilized O/W emulsions. The pretreatment significantly enhanced the oxidative stability of WPC-stabilized O/W emulsions. The addition of XG did not necessarily enhance the oxidative stability of O/W emulsions. Whether the oxidative stability of the O/W emulsion with XG is increased or decreased depends on the interface structure of the protein-XG complex. This study has significant implications for the development of novel structures containing lipid phases that are susceptible to oxidation. [ABSTRACT FROM AUTHOR]