Search

Although an air-backed thin plate is an effective sound receiver structure, it is easily damaged via pressure unbalance caused by external hydrostatic pressure. To overcome this difficulty, a simple pressure-balancing module is proposed. Despite its small size and relative simplicity, with proper design and operation, micro-channel structure provides a solution to the pressure-balancing problem. If the channel size is sufficiently small, the gas-liquid interface may move back and forth without breach by the hydrostatic pressure since the surface tension can retain the interface surface continuously. One input port of the device is opened to an intermediate liquid, while the other port is connected to the air-backing chamber. As the hydrostatic pressure increases, the liquid in the micro-channel compresses the air, and the pressure in the backing chamber is then equalized to match the external hydrostatic pressure. To validate the performance of the proposed mechanism, a micro-channel prototype is designed and integrated with the piezoelectric micro-machined flexural sensor developed in our previous work. The working principle of the mechanism is experimentally verified. In addition, the effect of hydrostatic pressure on receiving sensitivity is evaluated and compared with predicted behavior. [ABSTRACT FROM AUTHOR]

A micro-machined underwater acoustic receiver that utilizes the flexural vibration mode of a silicon thin plate and piezoelectric transduction material was investigated. In particular, air was used as the backing material for the hydrophone in order to improve sensitivity in the audible frequency range. To evaluate the effects of air backing on receiving sensitivity, a transduction model incorporating mechanical/electrical/acoustical design parameters was used in designing a piezoelectric micro-machined hydrophone. The sensitivity and displacement responses of the sensor were simulated using the model for air backing and water backing cases, and the benefit of using air backing to enhance sensitivity was confirmed. The micro-machined piezoelectric transducer was fabricated, assembled in the shape of a hydrophone, and tested to ascertain its characteristics as an underwater sensor. These characteristics, such as frequency response and sensitivity, were measured and compared with the simulated results. [ABSTRACT FROM AUTHOR]

A new microphone system was developed to monitor the human voice near the microphone in a noisy environment. The system is equipped with two special functions in addition to the usual microphone functions: reduction of air-blow effects by the mouth and focused reception to a sound source. A wind filter was developed to reduce the air-blow effects from the mouth during speaking. This filter is a plate perforated by an array of small holes; the method used to design the filter is also presented. To achieve focused reception, four microphones were used in conjunction with a new signal-processing method. The proposed signal-processing method effectively increases the directivity in the desired direction. Additionally, it provides the system with focusing on the source since the source is located adjacent to the system. A prototype of the proposed system was fabricated and subjected to performance tests. The results showed that air-blow effects can be reduced by up to 20 dB and the directional gain is more than 4 dB. The proposed microphone system shows such good performance that it can be used in mobile phones for whispering communication. [ABSTRACT FROM AUTHOR]