Search

Employing dielectric spectroscopy, oscillatory shear rheology, and calorimetry, the present work explores the molecular dynamics of the widely used insecticide imidacloprid above and below its glass transition temperature. In its supercooled liquid regime, the applied techniques yield good agreement regarding the characteristic structural (alpha) relaxation times of this material. In addition, the generalized Gemant–DiMarzio–Bishop model provides a good conversion between the frequency-dependent dielectric and shear mechanical responses in its viscous state, allowing for an assessment of imidacloprid's molecular hydrodynamic radius. In order to characterize the molecular dynamics in its glassy regime, we employ several approaches. These include the application of frequency–temperature superposition (FTS) to its isostructural dielectric and rheological responses as well as use of dielectric and calorimetric physical aging and the Adam–Gibbs–Vogel model. While the latter approach and dielectric FTS provide relaxation times that are close to each other, the other methods predict notably longer times that are closer to those reflecting a complete recovery of ergodicity. This seemingly conflicting dissimilarity demonstrates that the molecular dynamics of glassy imidacloprid strongly depends on its thermal history, with high relevance for the use of this insecticide as an active ingredient in technological applications. [ABSTRACT FROM AUTHOR]

Microscopic data on airborne particle separation in depth filters are a key for understanding and predictive modeling of the evolution of filtration properties such as pressure drop and efficiency during the filtration process. Tomographic imaging techniques (e.g., MRI, CT) are excellent methods for 3D-resolved analysis of microscopic loading behavior, but these are often limited in terms of spatial resolution and because of the low contrast between filter material and particles. In this study, an X-ray microscope was used to analyze the separation of iodine-containing particles (d50,3 =1.5 µm) in a coarse dust filter (porosity: 0.98; fiber diameter: 24 µm). The use of iodine-containing particles produced sufficient contrast for segmentation and analysis of the particle deposits produced during filtration. The established method allowed the analysis of the deposits within the material in terms of mass, size distribution, and the shape of the formed deposits in time and space. The data presented in this work provide new insights and methods for an improved understanding of the dynamic behavior of filter materials. [ABSTRACT FROM AUTHOR]

The manufacturing of amorphous solid dispersions via hot melt extrusion is a topic of high interest in pharmaceutical development. By this technique, the drug is dissolved in the molten polymer above solubility temperature within the process time. In this study, an experimental framework is proposed determining the minimum required process temperature and the residence time using particularly low quantities of material. Drug/polymer mixtures in different ratios were processed in a micro-scale extruder while the process temperature and residence time were varied systematically. The phase situation was assessed by the turbidity of the final extrudate. Four different drug/polymer mixtures were investigated in three drug/polymer ratios. The minimum required process temperature was close to solubility temperature for each specific formulation. Moreover, an influence of residence time on the phase situation was found. About three minutes were required in order to dissolve the drug in the polymer at these process conditions. [ABSTRACT FROM AUTHOR]

This paper reports the results of an international interlaboratory study led by the National Institute of Standards and Technology (NIST) on the measurement of high-pressure surface excess methane adsorption isotherms on NIST Reference Material RM 8850 (Zeolite Y), at 25 °C up to 7.5 MPa. Twenty laboratories participated in the study and contributed over one-hundred adsorption isotherms of methane on Zeolite Y. From these data, an empirical reference equation was determined, along with a 95% uncertainty interval (Uk=2). By requiring participants to replicate a high-pressure reference isotherm for carbon dioxide adsorption on NIST Reference Material RM 8852 (ZSM-5), this interlaboratory study also demonstrated the usefulness of reference isotherms in evaluating the performance of high-pressure adsorption experiments. [ABSTRACT FROM AUTHOR]

This paper reports the results of an international interlaboratory study led by the National Institute of Standards and Technology (NIST) on the measurement of high-pressure surface excess carbon dioxide adsorption isotherms on NIST Reference Material RM 8852 (ammonium ZSM-5 zeolite), at 293.15 K (20 °C) from 1 kPa up to 4.5 MPa. Eleven laboratories participated in this exercise and, for the first time, high-pressure adsorption reference data are reported using a reference material. An empirical reference equation nex=d(1+exp[-ln(P)+a/b])c, [nex-surface excess uptake (mmol/g), P-equilibrium pressure (MPa), a = −6.22, b = 1.97, c = 4.73, and d = 3.87] along with the 95% uncertainty interval (Uk = 2 = 0.075 mmol/g) were determined for the reference isotherm using a Bayesian, Markov Chain Monte Carlo method. Together, this zeolitic reference material and the associated adsorption data provide a means for laboratories to test and validate high-pressure adsorption equipment and measurements. Recommendations are provided for measuring reliable high-pressure adsorption isotherms using this material, including activation procedures, data processing methods to determine surface excess uptake, and the appropriate equation of state to be used. [ABSTRACT FROM AUTHOR]

Carbide-derived carbon (CDC) aerogel monoliths with very high porosity are synthesized starting from polymeric precursors. Cross-linking by platinum-catalyzed hydrosilylation of polycarbosilanes followed by supercritical drying yields preceramic aerogels. After ceramic conversion and silicon extraction in hot chlorine gas, hierarchically porous carbon materials with specific surface areas as high as 2122 m2 g−1 and outstanding total pore volumes close to 9 cm3 g−1 are obtained. Their pore structure is controllable by the applied synthesis temperature as shown by combined nitrogen (−196 °C) and carbon dioxide (0 °C) measurements coupled with electron microscopic methods. The combination of large micropore volumes and the aerogel-type pore system leads to advanced adsorption properties due to a combination of large storage capacities and effective materials transport in comparison with purely microporous reference materials as shown by thermal response measurements. [ABSTRACT FROM AUTHOR]

In order to address open questions concerning the surface chemistry and pore structure characterization of nanoporous carbons, we performed extensive experiments by combining various experimental techniques on a series of commercially available activated carbons which exhibit diverse surface chemistry characteristics. Pore size analysis was performed on Ar (87 K), N (77 K) and CO (273 K) adsorption isotherms using state-of-the art methods based on density functional theory, including the recently developed quenched solid density functional theory (QSDFT). A detailed study of the surface chemistry was obtained by applying temperature programmed desorption coupled with mass spectrometry (TPD-MS) as well as XPS (X-Ray-Photoelectron Scattering). This information together with the pore structure information leads to a reliable interpretation of systematic water adsorption measurements obtained on these materials. Our results clearly suggest that water adsorption is indeed a sensitive tool for detecting differences in surface chemistry between chemically and physically activated active carbon materials with comparable ultramicropore structure. The occurrence of sorption hysteresis associated with the filling of micro- and narrow mesopores (in a range where nitrogen and argon isotherms are reversible) provides additional structural information, complementary to the insights from argon/nitrogen/carbon dioxide adsorption. [ABSTRACT FROM AUTHOR]

κ-Carrageenan is a biopolymer extracted from red seaweeds which has been in the focus of pharmaceutical development for many years. Most applications make use of the large water binding capacity of κ-carrageenan. The primary limitation of κ-carrageenan is the variation in the substance quality. Therefore, the water binding capacity of different κ-carrageenan products was investigated by dynamic vapor adsorption, freezing and non-freezing bound water and water retention value. The κ-carrageenans were observed to have a higher water binding capacity than microcrystalline cellulose (MCC) in all three methods. The amount of adsorbed water is similar for all carrageenans. Differences between the carrageenan types (κ, ι, and λ) were remarkable for the freezing bound water and centrifugation bound water as well as between the κ-carrageenans of different suppliers. [ABSTRACT FROM AUTHOR]

The pore size distribution (PSD) characterization of microporous carbon materials is traditionally obtained from the analysis of N 2 adsorption isotherms at 77 K. In this work, we aim at testing the feasibility of using the density functional theory (DFT) route for PSD calculations of interconnected carbon pore structures. The first step of this study was to generate using an atomistic simulation approach, an ordered porous carbon material with well-defined porosity using NaY zeolite as a templating matrix. For this purpose, we used the grand canonical Monte-Carlo (GCMC) technique in which the carbon–carbon interactions were described within the frame of a newly developed tight binding approach and the carbon–zeolite interactions assumed to be characteristic of physisorption. We calculated the PSD of such a carbon porous material. At a second stage, we calculated nitrogen adsorption isotherms at different temperatures. These data were subsequently used as inputs for DFT calculation to obtain the PSD. Comparisons between DFT–PSD and MC–PSD are made. In particular, we show that with an appropriate wall thickness of two graphene layers, the PSD obtained from DFT calculation agrees well with that from direct analysis of the simulated structure. [ABSTRACT FROM AUTHOR]

The original version of this article was published open access. Unfortunately, due to a technical issue, the copyright holder name in the online version (HTML and XML) is incorrectly published as “Springer Science+Business Media, LLC, part of Springer Nature 2018”. Instead, it should be “The Author(s) 2018”. [ABSTRACT FROM AUTHOR]

Extended abstract of a paper presented at Microscopy and Microanalysis 2012 in Phoenix, Arizona, USA, July 29 – August 2, 2012. [ABSTRACT FROM PUBLISHER]