Search

The microvasculature is integral to nearly every tissue in the body, providing not only perfusion to and from the tissue, but also homing sites for immune cells, cellular niches for tissue dynamics, and cooperative interactions with other tissue elements. As a microtissue itself, the microvasculature is a composite of multiple cell types exquisitely organized into structures (individual vessel segments and extensive vessel networks) capable of considerable dynamics and plasticity. Consequently, it has been challenging to include a functional microvasculature in assembled or fabricated tissues. Isolated fragments of intact microvessels, which retain the cellular composition and structures of native microvessels, are proving effective in a variety of vascularization applications including tissue in vitro disease modeling, vascular biology, mechanistic discovery, and tissue prevascularization in regenerative therapeutics and grafting. In this review, we will discuss the importance of recapitulating native tissue biology and the successful vascularization applications of isolated microvessels. [ABSTRACT FROM AUTHOR]

Tissue engineering (TE) aims at building multicellular structures in the laboratory in order to regenerate, to repair or replace damaged tissues. In a well-established approach to TE, cells are cultured on a biocompatible porous structure, called scaffold. Cell seeding of scaffolds is an important first step. Here we study conditions that assure a uniform and rapid distribution of cells within the scaffold. The movement of cells has been simulated using the Metropolis Monte Carlo method, based on the principle that cellular system tends to achieve the minimum energy state. For different values of the model parameters, evolution of the cells' centre of mass is followed, which reflects the distribution of cells in the system. For comparison with experimental data, the concentration of the cells in the suspension adjacent to the scaffold is also monitored. Simulations of cell seeding are useful for testing different experimental conditions, which in practice would be very expensive and hard to perform. The computational methods presented here may be extended to model cell proliferation, cell death and scaffold degradation. [ABSTRACT FROM AUTHOR]

Cardiovascular disease is one of the leading causes of death in the United States, and new treatments need to be developed in order to provide novel therapies. Tissue engineering aims to develop biologic substitutes that restore tissue function. The purpose of the current study was to construct cell-based pumps, which can be viewed as biologic left ventricular assist devices. The pumps were fabricated by culturing cardiac, skeletal, and smooth muscle cells within a fibrin gel and then each 3-D tissue construct was wrapped around a decellularized rodent aorta. We described the methodology for pump fabrication along with functional performance metric, determined by the intra-luminal pressure. In addition, histologic evaluation showed a concentric organization of components, with the muscle cells positioned on the outermost surface, followed by the fibrin gel and the decellularized aorta formed the innermost layer. Though early in development, cell-based muscle pumps have tremendous potential to be used for basic and applied research, and with further development, can be used clinically as cell-based left ventricular assist devices. [ABSTRACT FROM AUTHOR]

Tissue hypoxia results in rapid angiogenesis in vivo, triggered by angiogenic proteins, including vascular endothelial growth factor (VEGF). Current views of tissue viability are founded on whether ‘deeper-lying’ cells receive sufficient nutrients and oxygen for normal activity and ultimately survival. For intact tissues, levels of such essential nutrients are governed by micro-vascular perfusion. However, there have been few effective quantitatively defined 3D models, which enable testing of the interplay or interdependence of matrix and cell density, and path diffusion on oxygen consumption in vitro. As a result, concepts on cell vulnerability to low oxygen levels, together with the nature of cellular responses are ill defined. The present study has adapted a novel, optical fibre-based system for in situ, real-time oxygen monitoring within three-dimensionally-spiralled cellular collagen constructs, which were then unfurled to enable quantitative, spatial measurements of VEGF production in different parts of the same construct exposed to different oxygen levels. A VEGF response was elicited by cells exposed to low oxygen levels (20 mmHg), primarily within the construct core. [ABSTRACT FROM AUTHOR]

Fluid flow and nutrient transport around a growing tissue construct within a cylindrical bioreactor of circular cross-section are considered. The bioreactor is filled with nutrient-rich culture medium, and the growing tissue construct is modelled as a cylindrical obstacle, also of circular cross-section, at a given (moving) position within the nutrient solution. The bioreactor rotates about its cylindrical axis, and its axial length is small relative to its radius (the high-aspect ratio vessel bioreactor). This small-aspect ratio means that a simple idealized model may be considered, in which (leading order) quantities are averaged across the axial direction. The leading-order fluid flow is then of Hele-Shaw type, and may be solved for explicitly. The trajectory of the tissue construct within the rotating bioreactor is determined by analysis of the various forces acting on it. Several different modes of motion are found to be possible, depending on the experimental conditions, and examples of each type of motion are presented. Additionally, we solve the problem for the nutrient transport around the tissue construct in the special case in which the construct remains fixed in the laboratory frame, and (as the cells proliferate in response to the nutrient available locally) deduce growth rates for the construct. Finally, we discuss our results in the light of possible experimental bioreactor set-ups. We note the present model's limitations, and consider how our work could be extended and improved to inform experimental protocols in future. [ABSTRACT FROM AUTHOR]

We develop mathematical models to provide insights into the morphology of a tissue construct formed from a single-cell suspension in culture media, within a rotating bioreactor. The bioreactor consists of a cylindrical vessel of circular cross-section rotating about its longitudinal axis with constant angular speed. Experimental studies show that at rotation rates below a critical value, the cells 'self-assemble' to form smooth 'nodules' that are approximately cylindrical with elliptical cross-section; however, at rotation rates above a critical value, an amorphous construct forms with a highly irregular boundary. The construct is denser than the surrounding culture media and histological studies indicate that the interior of the construct, which is a mix of apoptotic cells and culture media, is surrounded by an outer rim of proliferating cells and collagen. The construct is modelled as a viscous fluid drop surrounded by an extensible membrane in a (less dense) immiscible viscous fluid within a rotating bioreactor. We consider both thin-disk and slender-pipe bioreactors for which the aspect ratio, L*/a* (where L* and a* are the bioreactor length and radius, respectively), is small and large, respectively, and obtain a series of spatially 2D problems (independent of the axial coordinate). We then examine the hypothesis that the construct morphology is a result of the mechanical forces that it experiences by considering the interfacial stability of an initially circular fluid-fluid interface to small-amplitude, oscillatory perturbations. The instability is driven by the density difference between the two fluids, and we investigate the effect of the rotation rate, the (time-dependent) gravitational field, and the material and geometrical properties of the system on the stability properties. [ABSTRACT FROM AUTHOR]