Search

Objectives: To assess the skeletal and dental maxillary transverse compensation (yaw) on the cone beam computed tomography (CBCT) three‐dimensional reconstructed image of the skull in two groups of patients, both clinically affected by a class III malocclusion with deviation of the lower midline. Materials and Methods: An observational retrospective study was designed to analyse differences in two groups of patients, the first one was composed by patients affected by horizontal condylar hyperplasia, the second one by patients affected by dento‐skeletal asymmetric class III malocclusion. Each group was composed by 15 patients. Transverse analysis was performed by measuring five landmarks (three bilateral and two uneven) with respect to a mid‐sagittal plane; sagittal analysis was performed by measuring the sagittal distance on the mid‐sagittal plane between bilateral points. Means were compared through inferential analysis. Results: In the condylar hyperplasia group, all differences between the two sides were not statistically significant, nor for canines' difference (P =.0817), for molars (P =.1105) or for jugular points (.05871). In the class III group, the differences between the two sides were statistically significant for molars (P =.0019) and jugular points (P =.0031) but not for canines (P =.1158). Comparing the two groups, significant differences were found only for incisors' midline deviation (P =.0343) and canine (P =.0177). Conclusion: The study of the yaw on CBCT should be integrated into three‐dimensional cephalometry and could help in differentiating the various malocclusion patterns. [ABSTRACT FROM AUTHOR]

Background: The research aimed to evaluate the optimal Single-Photon Emission Computed Tomography (SPECT) cut-off value in differentiating condylar growth activeness, to observe 3-dimensional (3D) mandibular growth pattern, and to explore the potential correlation between 3D measurement parameters and SPECT uptake ratios in Chinese unilateral condylar hyperplasia (UCH) patients. Methods: Data of fifty-four Chinese UCH patients were analyzed retrospectively. All patients underwent SPECT within 1 month before or after the first CT examination (CT1); and received a second CT examination at least 12 months later (CT2). Data from CT scans were analyzed by comparing bilateral differences between CT1 and CT2. The sensitivity and specificity of SPECT were calculated by the receiver operating characteristic (ROC) curve. Pearson's correlation analysis was performed to investigate whether the mandibular growth was correlated with SPECT value. Results: SPECT had a sensitivity of 68.00% and a specificity of 72.41%, with an area under the ROC curve being 0.709. The optimal SPECT cut-off value for evaluating condylar activity has been determined to be 13%. In patients with an active growing condyle, there was a significant increase in Co-Gn and Co-Go, but not in Go-Gn, Go-MF, or MF-Gn. Pearson's correlation analysis revealed no correlation between 3D measurement parameters and differences in relative condylar uptake ratios. Conclusion: SPECT showed good diagnostic performance in UCH with the cut-off value of 13%. For those with an active growing condyle, the mandible grows diagonally and vertically, while the relative condylar uptake ratio was not directly related to mandibular growth. [ABSTRACT FROM AUTHOR]

Facial asymmetry associated with unilateral condylar hyperplasia (UCH) is a rare disease. The aim of this study was to evaluate the clinical conditions of progressive facial asymmetry in young subjects treated with high condylectomy. A retrospective study was performed including nine subjects diagnosed with UCH type 1B and progressive facial asymmetry around 12 years old with an upper canine progressing towards dental occlusion. After an analysis and a decision of treatment, orthodontics began one to two weeks prior to the condylectomy (with a mean vertical reduction of 4.83 ± 0.44 mm). Facial and dental asymmetry, dental occlusion, TMJ status and an open/closing mouth were analyzed before surgery and in the final stage of treatment, almost 3 years after surgery. Statistical analyses were performed using the Shapiro–Wilk test and a Student's t-test considering a p value of <0.05. Comparing T1 (before surgery) and T2 (once orthodontic treatment was finalized), the operated condyle showed a similar height to that observed in stage 1 with a 0.12 mm difference in height (p = 0.8), whereas the non-operated condyle showed greater height increase with an average of 3.88 mm of vertical growth (p = 0.0001). This indicated that the non-operated condyle remained steady and that the operative condyle did not register significant growth. In terms of facial asymmetry in the preoperative stage, a chin deviation of 7.55 mm (±2.57 mm) was observed; in the final stage, there was a significant reduction in the chin deviation with an average of 1.55 mm (±1.26 mm) (p = 0.0001). Given the small number of patients in the sample, we can conclude that high condylectomy (approx. 5 mm), if performed early, especially in the mixed-dentition stage before full canine eruption, is beneficial for the early resolution of asymmetry and thus the avoidance of future orthognathic surgery. However, further follow-up until the end of facial growth is required. [ABSTRACT FROM AUTHOR]

A 25-year-old woman presented with left condylar hyperplasia, canting-type facial asymmetry, mandibular prognathism, and arch width discrepancy. Bone scintigraphy confirmed the inactive status of the condyle, and the temporomandibular joint functioned within the normal range; thus, orthognathic surgery without condylectomy was performed. To correct facial asymmetry successfully through orthognathic surgery, sufficient dentoalveolar decompensation must be achieved in the presurgical orthodontic phase. In cases of canting-type facial asymmetry, teeth on the nondeviated side are extruded as dentoalveolar compensation. Therefore, vertical decompensation is required for intrusion of the extruded teeth. A miniscrew and resin build-ups were used for the intrusion of teeth, and posterior segmental osteotomy was simultaneously performed with orthognathic surgery for further intrusion. The canting-type facial asymmetry was notably corrected through successful vertical decompensation and close cooperation between orthodontists and maxillofacial surgeons. After 2 years of retention, the treatment results remained stable. [ABSTRACT FROM AUTHOR]

The following paper focuses on the topic of mandibular unilateral condyle hyperplasia (UCH). This form of mandibular asymmetry (MA) is one of the less common but still known pathologies that requires detailed surgical and orthodontic planning and treatment. Since this pathology is mostly related to a high number of individual dental, bone, and overgrowth factors, until now the treatment methods were individually driven. It seems that the scope of surgical intervention is greatly dependent on the degree of bone overgrowth and the occurrence of asymmetry. Many treatment modalities and possible surgical perspectives are known, yet, so far, no adequate detailed guidelines are known. This detailed review of this type of mandibular asymmetry will focus on diagnostics and treatment plans and outcomes. The following paper underlines the authors' own clinical experiences in MA and UCH treatment, which are compared with the literature review. The authors intend to investigate what has changed in the treatment and diagnostics of one-sided mandibular condyle and bone overgrowth. [ABSTRACT FROM AUTHOR]

In our clinic, the current preferred primary treatment regime for unilateral condylar hyperactivity is a proportional condylectomy in order to prevent secondary orthognathic surgery. Until recently, to determine the indicated size of reduction during surgery, we used a 'panorex-free-hand' method to measure the difference between left and right ramus heights. The problem encountered with this method was that our TMJ surgeons measured differences in the amount to resect during surgery. Other 2D and 3D method comparisons were unavailable. The aim of this study was to determine the most reproducible ramus height measuring method. Differences in left/right ramus height were measured in 32 patients using three methods: one 3D and two 2D. The inter- and intra-observer reliabilities were determined for each method. All methods showed excellent intra-observer reliability (ICC > 0.9). Excellent inter-observer reliability was also attained with the panorex-bisection method (ICC > 0.9), while the CBCT and panorex-free-hand gave good results (0.75 < ICC < 0.9). However, the lower boundary of the 95% CI (0.06–0.97) of the inter-observer reliability regarding the panorex-free-hand was poor. Therefore, we discourage the use of the panorex-free-hand method to measure ramus height differences in clinical practice. The panorex-bisection method was the most reproducible method. When planning a proportional condylectomy, we advise applying the panorex-bisection method or using an optimized 3D-measuring method. [ABSTRACT FROM AUTHOR]

A 29-year-old female patient with unilateral condylar hyperplasia (UCH) of the left side presented with facial asymmetry, maxillary transverse occlusal plane (MXTOP) cant, posterior open bite, and Class III relationship. Treatment consisted of proportional condylectomy of the left condyle for management of UCH, and fixed orthodontic treatment with intrusion of the left maxillary molars to correct the MXTOP cant and remaining chin point deviation (CPD). Proportional condylectomy with a 14-mm resection of the left condylar head improved the CPD from 11.5 mm to 7.8 mm and resolved the posterior open bite on the left side. However, it produced a Class II relationship on the right and left sides, posterior open bite on the right side, and anterior open bite. Fixed orthodontic treatment with 1.8-mm intrusion of the left maxillary molars using miniscrews corrected the MXTOP cant from 3.5 mm to 1.7 mm, reduced the remaining CPD from 7.8 mm to 3.7 mm, produced counterclockwise rotation of the mandible, and resolved the posterior open bite on the right side and the anterior open bite. After 16 months of total treatment, normal overbite/overjet and Class I relationship were obtained. Treatment results were well maintained after 5 years of retention. For the correction of UCH, it is important to determine the amount of condylar head resection and accurately simulate the correction of CPD and MXTOP cant through intrusion of the maxillary molars. [ABSTRACT FROM AUTHOR]

Facial asymmetry can be caused by unilateral condylar hyperplasia. In such cases, it may be difficult to achieve symmetry since there is dentoalveolar compensation on the affected side, and the occlusal cant does not correspond to the frontal mandibular deviation. In the case presented, surgical orthodontic treatment and orthognathic surgery planning was accomplished for a patient with facial asymmetry due to condylar hyperplasia. The surgical plan was devised with particular attention to the severe dentoalveolar compensation. In this case, prior to the two-jaw surgery, the occlusal cant and frontal mandibular plane inclination was corrected through impaction of the left molar region by segmental osteotomy. Facial asymmetry and severe dentoalveolar compensation were successfully corrected after a unilateral segmental osteotomy and two-jaw surgery, resulting in a stable occlusal relationship and facial symmetry as well as good jaw function. Collaboration between the orthodontists and maxillofacial surgeons was essential for the successful treatment of the patient. [ABSTRACT FROM AUTHOR]

Copyright of Nuclear Medicine / Nukleární Medicína is the property of Czech Medical Association of JE Purkyne and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: Unilateral condylar hyperplasia (UCH) of the mandible, or Hypercondylia, is a pathological condition that determines an abnormal growth of the affected condyle. Bone SPECT with Tc99m-diphosphonates is a successful tool in the diagnosis of UCH. EANM guidelines also suggest the use of 18F–NaF PET/CT, though it leads to a higher radiation exposure. Aim: As UCH patients are young, we aimed to develop a low dose 18F–Fluoride PET/CT protocol and compare it to a standard injected activity scan, to assess if the image quality remains unchanged. Materials and methods: We prospectively enrolled 20 patients (7 males, 13 females, mean age 23.2) with UCH, who underwent 18F–NaF PET/CT to assess the hypercondylia. We administered a low activity of 18F–NaF (2.9 MBq/kg) in 15 patients and a standard activity (5.3 MBq/kg) in 5 patients. Activity range was chosen according to 2015 EANM guidelines. To determine if the scans with low radiotracer activity were "diagnostic" such as those with standard activity, two expert nuclear medicine physicians, unaware of the administered activity, independently reviewed the scans and expressed a final qualitative judgment in terms of "diagnostic"/"non-diagnostic" scan. Furthermore, we compared the effective dose of a low injected activity PET/CT to the standard one and to a Bone SPECT performed with standard injected activity of Tc99m-diphosphonates. Results: Reviewers classified 19 of 20 scans as "diagnostic". Only one of them was classified as "non diagnostic" due to condylar arthrosis that disturbed the correct evaluation of condylar radiotracer uptake. The effective dose of a 18F–Fluoride PET/CT, in patient of 70 kg, is about 3.5 mSv in scans performed with 2.9 MBq/kg [0.017 mSv/MBq × 2.9 MBq/kg × 70 kg] and about 6.3 mSv in ones performed with 5.3 MBq/kg [0.017 mSv/MBq × 5.3 MBq/kg × 70 kg]. The effective dose of 99mTc-MDP bone SPECT is about 3.2 mSv [0.0043 mSv/MBq × 740 MBq of 99mTc-MDP]. Discussion: 18F–NaF PET/CT performed with a low radiotracer activity allows a good assessment of UCH similar to that performed with an ordinary activity. The effective radiation dose of a low-injected activity PET/CT is significantly lower than an ordinary-injected activity and is not significantly higher than the most used Bone SPECT. Moreover PET/CT is performed in 1.5 h while Bone SPECT requires at least 3.5 h. Conclusions: The 18F–Fluoride PET/CT procedure could be performed with 2.9 MBq/Kg (minimum 185 MBq, recommended at least 200 MBq) of 18F–NaF to minimize the effective radiation dose received, maintaining the quality of the scan. Further studies including a larger number of patients and clinical follow-up are needed to confirm our preliminary findings. [ABSTRACT FROM AUTHOR]