Search

This paper addresses the design, fabrication and control of Fabric Inflatable Soft Actuators (FISAs) for driving Soft Wearable Devices (SWD) for rehabilitation or assistance tasks. FISAs are integrated by a set of pneumatic chambers made of 200D TPU-nylon that create bending-extending motions using a modular assembly that allow FISAs to adapt them to any size of limb or easily replace them. Regarding FISAs fabrication, a self-hand manufacturing approach has been used for cutting, sewing, and joining them. Additionally, to evaluate FISAs operation, a Soft Exo-Sleeve called MOSAR system was manufactured to achieve elbow motion. To control their inflation-deflation process in real-time, proportional and solenoid valves have been implemented along with a Proportional-Derivative (PD) control strategy that has been embedded in the NUCLEO-STM32F767ZI™ board with rapid control prototyping. Preliminary experiments about FISA performance on the MOSAR system were carried out to measure the inflation-deflation time, Range of Motion (ROM), and output force when elbow flexion-extension occurred in a dummy limb. The results have demonstrated FISAs functionality above the exosuit since they were able to lift 1 kg with flexion of 130 ° in 5 s using 50 psi. Therefore, FISAs represent a feasible choice for semicircular motions in other joints such as the wrist, hand, or knee, no matter age, limb, or size, only the number of FISAs must be adjusted on the MOSAR system. [ABSTRACT FROM AUTHOR]

Virtual environments (VEs) and haptic devices increase patients' motivation. Furthermore, they observe their performance during rehabilitation. However, some of these technologies present disadvantages because they do not consider therapists' needs and experience. This research presents the development and usability evaluation of an upper limb rehabilitation system based on a user-centered design approach for patients with moderate or mild stroke that can perform active rehabilitation. The system consists of a virtual environment with four virtual scenarios and a developed haptic device with vibrotactile feedback, and it can be visualized using a monitor or a Head-Mounted Display (HMD). Two evaluations were carried out; in the first one, five therapists evaluated the system's usability using a monitor through the System Usability Scale, the user experience with the AttrakDiff questionnaire, and the functionality with customized items. As a result of these tests, improvements were made to the system. The second evaluation was carried out by ten volunteers who evaluated the usability, user experience, and performance with a monitor and HMD. A comparison of the therapist and volunteer scores has shown an increase in the usability evaluation (from 78 to >85), the hedonic score rose from 0.6 to 2.23, the pragmatic qualities from 1.25 to 2.20, and the attractiveness from 1.3 to 2.95. Additionally, the haptic device and the VE showed no relevant difference between their performance when using a monitor or HMD. The results show that the proposed system has the characteristics to be a helpful tool for therapists and upper limb rehabilitation. [ABSTRACT FROM AUTHOR]

Many exoskeletons in scientific communications and patents only reach a technology readiness level corresponding to an experimental physical model (EPM) or a low-fidelity prototype. While only operational in a laboratory environment, the increasing technology readiness level (TRL) in exoskeletons is not widely studied. This work presents a study to reach this aim based on a new methodology that includes two phases, eleven steps, and four case studies from EPM (TRL3) of ERMIS up to TRL 5 of ERMIS. The results of this article show the increase in TRL based on the analysis of the operational parameters of the ERMIS exoskeleton. The validation of the passive rehabilitation movements was made by characterizing the points of their trajectories assisted by an anthropomorphic mechanism used to measure the end-effector position of ERMIS by means of the acquisition of data, obtaining an error of 20 mm. In conclusion, the real performance parameters are detailed, explaining their causes according to the behavior of the exoskeleton in a real environment operating the four case studies. It presents the group of parameters that reach the TRL 5, which were validated in Computer-Aided Design (CAD) software. [ABSTRACT FROM AUTHOR]

Today, computer vision algorithms are very important for different fields and applications, such as closed-circuit television security, health status monitoring, and recognizing a specific person or object and robotics. Regarding this topic, the present paper deals with a recent review of the literature on computer vision algorithms (recognition and tracking of faces, bodies, and objects) oriented towards socially assistive robot applications. The performance, frames per second (FPS) processing speed, and hardware implemented to run the algorithms are highlighted by comparing the available solutions. Moreover, this paper provides general information for researchers interested in knowing which vision algorithms are available, enabling them to select the one that is most suitable to include in their robotic system applications. [ABSTRACT FROM AUTHOR]