Search

The National Ignition Facility uses a soft x-ray opacity spectrometer for x-ray spectral imaging in high-energy-density experiments. The increased demand for a better spectral resolution prompted the investigation into the Agfa D4 film. Characterization is already under way for the film. A Manson x-ray source using six different anodes was used to expose film to the linear optical density (OD) region. This is a continuation of the previous work, and the updated analysis process is communicated here. The identified uncertainties have been reduced with the updated steps that improve the results of the characterization process. When the Stanford Synchrotron Radiation Lightsource Beamline 16-2 was operational, the film was characterized at that source. Its beam offered a higher fluency with a lower exposure time needed to reach saturation. Results for both sources are compared in this paper. [ABSTRACT FROM AUTHOR]

Opacity measurements are being carried out at the Z-facility at Sandia National Laboratories and at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory. The current soft x-ray Opacity Spectrometer (OpSpec) used on the NIF uses two elliptically bent crystals in time-integrated mode on either an image plate or a film. Plans are under way to expand these opacity measurements into a mode of time-resolved detection, called OpSpecTR. Previously, considerations for the available hCMOS detector size and photometrics led to a crystal geometry redesign and the use of a grazing angle x-ray mirror. The mirror acts as a low-pass x-ray energy filter, reducing the contribution of higher energy x rays. The first tests of the mirror and the crystal for OpSpecTR are presented here. The size of the mirror reflection and the reflectivity is tested using a Manson x-ray source. The mirror coupled with the new elliptical crystal shape demonstrates OpSpecTR's spectral coverage. The results from the x-ray optics performance testing are shown along with the intended design. [ABSTRACT FROM AUTHOR]

X-ray opacity measurements on the National Ignition Facility (NIF) are in the process of reproducing earlier measurements from the Sandia Z Facility, in particular for oxygen and iron plasmas. These measurements have the potential to revise our understanding of the "solar problem" and of the hot degenerate Q class white dwarf structure by probing plasma conditions near the base of their convection zones. Accurate opacity measurements using soft x-ray Bragg crystal spectrometers require correction for higher-order diffraction effects. Extending prior work in this area [Dutra et al., Review of Scientific Instruments 93, 113527 (2022)], we have developed a new method to remove higher-order spectral components from NIF opacity spectrometer data. By modeling absorption and backlighting continuum spectra and subtracting the second- and third-order components from the measured data, we are able to perform this correction while avoiding imprinting first-order model line features onto the data. [ABSTRACT FROM AUTHOR]

The Opacity Spectrometer (OpSpec) used in the National Ignition Facility's opacity experiments measures x-ray spectra from 0.9 to 2.1 keV from the different experimental regions: the backlight source, emission source, and the absorption region with the transmission calculated from these regions. The OpSpec designs have gone through several iterations to help improve the signal-to-noise ratio, remove alternate crystal plane reflections, and improve spectral resolution, which helps to increase the validity of the opacity measurements. However, the source spans well outside the current working spectral range, and higher-order reflections are intrinsic to the crystal, which increases the overall signal seen in the data regions. The recorded data are the convolution of 1st order transmission, higher-order reflections, and the penumbra blurring. This work represents the details for deconvolving the 2nd and 3rd order spectral energy corrections with a penumbral de-blurring to correct the relative measurement of x-ray intensity of different spectral energies and further analysis of datasets relevant to the opacity experiments. [ABSTRACT FROM AUTHOR]

When compared with the National Ignition Facility's (NIF) original soft x-ray opacity spectrometer, which used a convex cylindrical design, an elliptically shaped design has helped to increase the signal-to-noise ratio and eliminated nearly all reflections from alternate crystal planes. The success of the elliptical geometry in the opacity experiments has driven a new elliptical geometry crystal with a spectral range covering 520–1100 eV. When coupled with the primary elliptical geometry, which spans 1000–2100 eV, the new sub-keV elliptical geometry helps to cover the full iron L-shell and major oxygen transitions important to solar opacity experimentation. The new design has been built and tested by using a Henke x-ray source and shows the desired spectral coverage. Additional plans are underway to expand these opacity measurements into a mode of time-resolved detection, ∼1 ns gated, but considerations for the detector size and photometrics mean a crystal geometry redesign. The new low-energy geometry, including preliminary results from the NIF opacity experiments, is presented along with the expansion plans into a time-resolved platform. [ABSTRACT FROM AUTHOR]

X-ray polarization-splitting crystals separate incident x rays into two components with perpendicular polarization by Bragg reflections at 45° from paired sets of internal planes. Here, the polarization-splitting properties of a germanium crystal are verified using incompletely polarized synchrotron radiation. Cleaner data would have come from a beam with a higher degree of polarization, which is achievable with small changes in the experimental geometry. [ABSTRACT FROM AUTHOR]

X-ray films remain a key asset for high-resolution x-ray spectral imaging in high-energy-density experiments conducted at the National Ignition Facility (NIF). The soft x-ray Opacity Spectrometer (OpSpec) fielded at the NIF has an elliptically shaped crystal design that measures x rays in the 900–2100 eV range and currently uses an image plate as the detecting medium. However, Agfa D4 and D3sc x-ray films' higher spatial resolution provides increased spectral resolution to the data over the IP-TR image plates, driving the desire for regular use of x-ray film as a detecting medium. The calibration of Agfa D4 x-ray film for use in the OpSpec is communicated here. These calibration efforts are vital to the accuracy of the NIF opacity measurements and are conducted in a previously un-studied x-ray energy range under a new film development protocol required by NIF. The absolute response of Agfa D4 x-ray film from 705 to 4620 eV has been measured using the Nevada National Security Site Manson x-ray source. A broader range of energies was selected to compare results with previously published data. The measurements were taken using selected anodes, filters, and applied voltages to produce well-defined energy lines. [ABSTRACT FROM AUTHOR]

The single-crystal spectropolarimeter envisioned by Baronova and Stepanenko splits an incident x-ray beam into two beams with mutually orthogonal linear polarizations by using simultaneous reflections at the perfectly polarizing 45° Bragg angle on certain pairs of internal planes in hexagonal or cubic crystals. These planes intersect along a threefold symmetry axis, making a 120° angle with each other, and are typically symmetric with respect to the crystal surface. In practice, the wavelength of the diagnostic x-ray lines does not exactly satisfy Bragg's law for the crystal in the ideal polarizing orientation, so the extinction of reflections is incomplete. Accepting this limitation, this paper shows that for cubic crystals, other pairs of internal planes exist that satisfy the polarization requirements approximately. Typically, they are accessible from the perfect polarization-splitting geometry by small rotations of the crystal. This paper includes examples of such planes for cubic crystals with {110} and {211} surface cuts. [ABSTRACT FROM AUTHOR]

The soft x-ray Opacity Spectrometer (OpSpec) used on the National Ignition Facility (NIF) has recently incorporated an elliptically shaped crystal. The original OpSpec used two convex cylindrical crystals for time-integrated measurements of point-projection spectra from 540 to 2100 eV. However, with the convex geometry, the low-energy portion of the spectrum suffered from high backgrounds due to scattered x-rays as well as reflections from alternate crystal planes. An elliptically shaped crystal allows an acceptance aperture at the crossover focus between the crystal and the detector, which reduces background and eliminates nearly all reflections from alternate crystal planes. The current elliptical design is an improvement from the convex cylindrical design but has a usable energy range from 900 to 2100 eV. In addition, OpSpec is currently used on 18 NIF shots/year, in which both crystals are typically damaged beyond reuse, so efficient production of 36 crystals/year is required. Design efforts to improve the existing system focus on mounting reliability, reducing crystal strain to increase survivability between mounting and shot time, and extending the energy range of the instrument down to 520 eV. The elliptical design, results, and future options are presented. [ABSTRACT FROM AUTHOR]

Hexagonal and cubic crystals contain paired sets of internal planes that reflect the linearly polarized components of certain x rays into two separate, perpendicular directions. For the cubic crystals, two distinct crystal orientations provide the same polarization-splitting geometry. One of the orientations may have advantages for plasma spectroscopy by suppressing unwanted reflections. This paper demonstrates the two orientations with a germanium crystal and K characteristic lines from copper and zirconium. [ABSTRACT FROM AUTHOR]

As one of many scholars who have situated their research in terms of nonviolence (a mode of action) rather than pacifism (a philosophical position), I ask, what do we gain instead by adopting an explicitly pacifist stance, especially as a response to forms of violent extremism? First, I respond to three common dismissals of pacifism, interrogating the misguided assumptions about violence/nonviolence upon which they depend. Second, exploring recent violent encounters between white nationalist and antifa activists in the US, as well as insights from Ruddick's "maternal thinking," I argue that taking a principled stance against collective violence (1) has practical utility, including a protective effect, (2) forces us to wrestle with the humanity of our adversaries and our inability to ever fully control them, and (3) enables radical inclusion by requiring sustained attention to difference but also resistance to the forms of injustice and oppression this "difference" might entail. The pacifism that emerges here is messy and power laden, demanding that we continually wrestle not only with one another but with the tensions inherent in human interaction, difference, and conflict. [ABSTRACT FROM AUTHOR]

A wide variety of z-pinches are host to energetic electron beams whose energies and origins have yet to be sufficiently characterized. Knowing the electron energies and currents of these electron beams can give insight into the mechanism responsible for the acceleration of the electrons to such high energies. Measurements with a magnetic analyzer have been carried out to determine the energy distribution of electron beams on a variety of aluminum wire array z-pinch geometries at the Nevada Terawatt Facility at the University of Nevada, Reno. These measurements show that as the geometry of the wire array is changed so that the initial angle of inclination, or necking shape, is enhanced, there is an increase in electron beam activity and electron energies. Measurements such as these can be useful to benchmark spectroscopic techniques used to characterize these energetic beams and give insight into the mechanisms responsible for the generation of such energetic beams in z-pinch plasmas. [ABSTRACT FROM AUTHOR]

In spring 2002, ambrosia beetles (Coleoptera: Scolytidae) infested an intensively managed 22-ha tree plantation on the upper coastal plain of South Carolina. Nearly 3,500 scolytids representing 28 species were captured in ethanol-baited traps from 18 June 2002 to 18 April 2004. More than 88% of total captures were exotic species. Five species [Dryoxylon onoharaensum (Murayama), Euwallacea validus (Eichhoff), Pseudopityophthorus minutissimus (Zimmermann), Xyleborus atratus Eichhoff, and Xyleborus impressus Eichhoff]) were collected in South Carolina for the first time. Of four tree species in the plantation, eastern cottonwood, Popuiwi deltoides Bartram, was the only one attacked, with nearly 40% of the trees sustaining ambrosia beetle damage. Clone ST66 sustained more damage than clone S7C15. ST66 trees receiving fertilization were attacked more frequently than trees receiving irrigation, irrigation + fertilization, or controls, although the number of S7C15 trees attacked did not differ among treatments. The study location is near major shipping ports; our results demonstrate the necessity for intensive monitoring programs to determine the arrival, spread, ecology, and impact of exotic scolytids. [ABSTRACT FROM AUTHOR]

The purpose of this study is to examine what factors cause consumer risk perception during periods of food safety concern. A survey of 195 respondents was carried out to explore the nature of consumer perception of food safety related risk using multi-dimensional analysis and how this perception was affected. Multiple regression analysis was adopted to assess the effect of risk characteristics on consumer risk perception in terms of perceived health, psychological, financial, time and taste risks. All five regression models were highly significant. Characteristics of risk, such as severity of consequences, concern about safety, involuntary exposure to risk, harmful to the environment, information, exaggerated report and adequate regulations were found to be important for predicting consumer perception of microbiological risk in chicken. Implications for future research are discussed. [ABSTRACT FROM PUBLISHER]

Neuropathic pain, or pain after nervous system injury, can be very refractory to pharmacologic interventions. Through a better understanding of the pathophysiology of neuropathic pain, it has been suggested that nonopioid agents, such as antidepressants and anticonvulsants, may be more efficacious in the treatment of neuropathic pain than common analgesics, such as opioids or nonsteroidal anti-inflammatory drugs. However, this has not been consistently demonstrated in clinical studies. Conversely, many confounding factors of neuropathic pain make it difficult to interpret clinical studies. Therefore, we must develop a better understanding of the preclinical models of neuropathic pain to better understand the application of new and old drugs to the human neuropathic pain state. This article provides an overview of the commonly used preclinical neuropathic pain models, followed by a summary of the efficacy of currently available agents in preclinical pain models and human correlates. [ABSTRACT FROM AUTHOR]

A recently developed single-crystal x-ray spectropolarimeter has been used to record paired sets of polarization-dependent and axially resolved x-ray spectra emitted by wire array z-pinches. In this measurement, two internal planes inside a suitable crystal diffract the x-rays into two perpendicular directions that are normal to each other, thereby separating incident x-rays into their linearly polarized components. This paper gives considerations for fielding the instrument on extended sources. Results from extended sources are difficult to interpret because generally the incident x-rays are not separated properly by the crystal. This difficulty is mitigated by using a series of collimating slits to select incident x-rays that propagate in a plane of symmetry between the polarization-splitting planes. The resulting instrument and some of the spatially resolved polarized x-ray spectra recorded for a 1-MA aluminum wire array z-pinch at the Nevada Terawatt Facility at the University of Nevada, Reno will be presented. [ABSTRACT FROM AUTHOR]