Search

The transition metal‐catalyzed multi‐component cross‐electrophile sulfonylation, which incorporates SO2 as a linker within organic frameworks, has proven to be a powerful, efficient, and cost‐effective means of synthesizing challenging alkyl–alkyl sulfones. Transition metal catalysts play a crucial role in this method by transferring electrons from reductants to electrophilic organohalides, thereby causing undesirable side reactions such as homocoupling, protodehalogenation, β‐hydride elimination, etc. It is worth noting that tertiary alkyl halides have rarely been demonstrated to be compatible with current methods owing to various undesired side reactions. In this work, a zinc‐promoted cross‐electrophile sulfonylation is developed through a radical‐polar crossover pathway. This approach enables the synthesis of various alkyl–alkyl sulfones, including 1°‐1°, 2°‐1°, 3°‐1°, 2°‐2°, and 3°‐2° types, from inexpensive and readily available alkyl halides. Various functional groups are well tolerated in the work, resulting in yields of up to 93%. Additionally, this protocol has been successfully applied to intramolecular sulfonylation and homo‐sulfonylation reactions. The insights gained from this work shall be useful for the further development of cross‐electrophile sulfonylation to access alkyl–alkyl sulfones. [ABSTRACT FROM AUTHOR]

Different constituents of the cultivation substrate have significant effect on the yield and quality of edible mushrooms. The residue after the extraction of instant tea has exhibited to be biologically significant, and could be used as a substrate for cultivation. This study aimed to investigate the feasibility of tea extraction residue (TER) on button mushroom (Agaricus bisporus) cultivation, as an ingredient in the substrate, and assess the growth status, nutritional values, and sensory characteristics of fruiting body. The results showed that the strains could grow well on the cultivated substrate with 20% addition of TER. The total amount of hydrolyzed amino acids in the fruiting bodies of three TER-based groups (TER accounted for 10%, 20%, and 37.5%, respectively) was higher than that of the control group, and the total amount of essential amino acids was increased by 33.33%, 22.47%, and 9.92% compared with the control group, respectively. In addition, the results of gas chromatography-mass spectrometry (GC-MS) revealed that the addition of TER to the cultivation of substrate significantly enhanced the content of typical mushroom-flavor compounds in button mushroom, such as 1-octen-3-ol, 3-octanol, and 1-octen-3-one. It can be concluded that TER may be an ideal choice for the substrate in commercial cultivation of button mushroom. [ABSTRACT FROM AUTHOR]

We describe a nickel-catalyzed three-component sulfonylation of readily available non-activated alkyl chlorides. A wide range of alkyl aryl sulfones can be synthesized from alkyl chlorides, aryl boronic acids, and potassium metabisulfite, a cheap, efficient, and commercially available SO2 source under simple and easy-to-handle reaction conditions. High selectivity can be achieved with a slight excess of phenylboronic acid and a sulfur dioxide source. [ABSTRACT FROM AUTHOR]

To investigate the changes of the main ingredients in black garlic (BG) during fermentation, the contents of moisture, total acids and reducing sugars were determined. Allicin, 5-Hydroxymethylfurfural (5-HMF), and total phenols were also determined as bioactive substances. DPPH scavenging capacity was determined to indicate the antioxidant activity of BG. The changes in hardness and color were detected as well. The results showed that the moisture content decreased from 66.13% to 25.8% during the fermentation. The content of total acids, total phenols, and reducing sugars increased from 0.03 g/g to 0.29 g/g, from 0.045 μg/g to 0.117 μg/g, and from 0.016 g/g to 0.406 g/g, respectively. The content of 5-HMF increased from 0 to 4.12 μg/mL continuously, while the content of allicin increased from 0.09 mmol/100 g to 0.30 mmol/100 g and then decayed to 0.00 mmol/100 g. The L*, a*, and b* values of BG were 23.65 ± 0.44, 0.64 ± 0.06, and 0.85 ± 0.05, respectively. There was a higher intensity of dark color in BG than that in fresh garlic. The hardness values decreased first and then increased in later fermentation from 465.47 g to 27,292.38 g. Principal component analysis (PCA) showed that the samples were divided into three clusters, including cluster1 (fresh garlic, S0), cluster2 (S1), and cluster3 (S3−S9). This research effectively clarified the various stage of the BG fermentation process, and it is expected to supply references for reducing production time in industrial BG fermentation. [ABSTRACT FROM AUTHOR]

A novel micron-range displacement sensor based on a whispering-gallery mode (WGM) microcapillary resonator filled with a nematic liquid crystal (LC) and a magnetic nanoparticle- coated fiber half-taper is proposed and experimentally demonstrated. In the proposed device, the tip of a fiber half-taper coated with a thin layer of magnetic nanoparticles (MNPs) moves inside the LC-filled microcapillary resonator along its axis. The input end of the fiber half-taper is connected to a pump laser source and due to the thermo-optic effect within the MNPs, the fiber tip acts as point heat source increasing the temperature of the LC material in its vicinity. An increase in the LC temperature leads to a decrease in its effective refractive index, which in turn causes spectral shift of the WGM resonances monitored in the transmission spectrum of the coupling fiber. The spectral shift of the WGMs is proportional to the displacement of the MNP-coated tip with respect to the microcapillary's light coupling point. The sensor's operation is simulated considering heat transfer in the microcapillary filled with a LC material having a negative thermo-optic coefficient. The simulations are in a good agreement with the WGMs spectral shift observed experimentally. A sensitivity to displacement of 15.44 pm/µm and a response time of 260 ms were demonstrated for the proposed sensor. The device also shows good reversibility and repeatability of response. The proposed micro-displacement sensor has potential applications in micro-manufacturing, precision measurement and medical instruments. [ABSTRACT FROM AUTHOR]

Sufu, a Chinese traditional fermented soybean product, has a characteristic foul smell but a pleasant taste. We determined the core functional microbiota and their metabolic mechanisms during sufu fermentation by examining relationships among bacteria, characteristic flavor compounds, and physicochemical factors. Flavor compounds in sufu were detected through headspace solid-phase microextraction coupled with gas chromatography–mass spectrometry, and the microbial community structure was determined through high-throughput 16S rRNA sequencing. The results showed that the fermentation process of sufu could be divided into early and late stages. The early stage was critical for flavor development. Seven microbiota were screened based on their abundance, microbial relevance, and flavor production capacity. Five microbes were screened in the early stage: Pseudomonas, Tetragenococcus, Lysinibacillus, Pantoea, and Burkholderia–Caballeronia–Paraburkholderia. Three microbes were screened in the late stage: Exiguobacterium, Bacillus, and Pseudomonas. Their metabolic profiles were predicted. The results provided a reference for the selection of enriched bacterial genera in the fermentation process and controlling applicable process conditions to improve the flavor of sufu. [ABSTRACT FROM AUTHOR]

Eye blinking is closely related to human physiology and psychology. It is an effective method of communication among people and can be used in human–machine interactions. Existing blink monitoring methods include video-oculography, electro-oculograms and infrared oculography. However, these methods suffer from uncomfortable use, safety risks, limited reliability in strong light or dark environments, and infringed informational security. In this paper, we propose an ultrasound-based portable approach for eye-blinking activity monitoring. Low-power pulse-echo ultrasound featuring biosafety is transmitted and received by microelectromechanical system (MEMS) ultrasonic transducers seamlessly integrated on glasses. The size, weight and power consumption of the transducers are 2.5 mm by 2.5 mm, 23.3 mg and 71 μW, respectively, which provides better portability than conventional methods using wearable devices. Eye-blinking activities were characterized by open and closed eye states and validated by experiments on different volunteers. Finally, real-time eye-blinking monitoring was successfully demonstrated with a response time less than 1 ms. The proposed solution paves the way for ultrasound-based wearable eye-blinking monitoring and offers miniaturization, light weight, low power consumption, high informational security and biosafety. [ABSTRACT FROM AUTHOR]

In this article a Vernier effect based sensor is analyzed and demonstrated experimentally in a tri-microfiber coupler (Tri-MFC) and polarization-maintaining fiber (PMF) loop interferometer (Tri-MFC-PMF) to provide ultrasensitive refractive index and temperature sensing. The main novelty of this work is an analysis of parameters of the proposed Tri-MFC-PMF with the objective of determining the conditions leading to a “strong” Vernier effect. It has been identified by simulation that the Vernier effect is a primary factor in the design of Tri-MFC-PMF loop sensing structure for sensitivity enhancement. It is furthermore demonstrated experimentally that enhancing the visibility of the Vernier spectrum in the Tri-MFC-PMF allows to achieve an ultrahigh refractive index and temperature sensitivity with improved measurement accuracy. Specifically it is shown that small values of the total phase difference (π/16+Nπ)∼(π/4+Nπ), where N is an integer, accumulated over the PMF loop and Tri-MFC loop result in a “strong” Vernier effect. Experimentally an ultrahigh refractive index sensitivity of -20588 nm/RIU and temperature sensitivity of 0.019 nm/°C are demonstrated by utilizing the stronger Vernier effect with “clear” Vernier spectrum. This analysis of the parameters may be useful to future researchers seeking to increase the measurement accuracy of sensors by enhancing the spectral visibility of the Vernier effect in other types of fiber optic interferometers. [ABSTRACT FROM AUTHOR]

The capacitive micro-machined ultrasonic transducer (CMUT) has a good acoustic matching with air. In this paper, a 16-element CMUT array for airborne application is designed and fabricated by SOI wafer bonding process. All the CMUT cells have the same geometric parameters with circular and sealed membrane, which vibrate uniformly for good transmission efficiency. And the thin membrane with small mass is proposed to broaden the bandwidth of CMUT. The sensor array operates at a 215.6 kHz resonance frequency with a large −3dB fractional bandwidth of 15.7% and a good consistency. The selection of the driving parameters (i.e. the DC bias voltage and AC excitation signal) has been analyzed comprehensively, which can be used to optimize the driving strategy of the CMUT for better transmission and reception performance. The CMUT array proposed in this paper has been used to demonstrate a two-dimension non-contact air-coupled imaging by through-transmission mode and pitch-catch mode. The images of two kinds of objects have been reconstructed to exhibit the capability of the CMUT array in air-ultrasonic imaging, suggesting broad applications including 3D imaging, gesture recognition, and other human-machine interactions in air. [ABSTRACT FROM AUTHOR]

This article proposes a novel structured aluminum nitrate (AlN) thin film based piezoelectric micromachined ultrasonic transducer (PMUT) with superior ultrasonic performances that can directly be applied for pulse-echo imaging. The bottom electrode of the PMUT is thickened and serves both as the electrical layer and supporting layer. Large numbers of elements are parallelly connected to form square arrays. This method can not only improve the acoustic output but also reduce the total impedance. The ultrasonic transmitting, receiving behaviors of our developed 6.37 MHz (in air) PMUT array containing vibration elements of horizontal x vertical $= 20 \times 20$ are investigated. It can generate superior acoustic output with a normalized value of 1.71 kPa $\cdot \text{V}^{\mathbf {-1}}\,\,\cdot $ mm−2 at 3.6 mm away in deionized water media. Thanks to the lager acoustic output and reduced electrical impedance, ultrasonic pulse-echo imaging with our developed PMUT array is realized only with the assistance of a switch to separate the ultrasound transmission and reception process. We have mechanically scanned a mark in steel plate and generate a B-mode image with great accuracy using the recorded pulse-echo signals. These demonstrate the superior acoustic behavior of our developed PMUT array and open an avenue to the development of portable ultrasonic imaging devices. [ABSTRACT FROM AUTHOR]

Approximately 80% of men who reach 80 years of age will have some form of prostate cancer. The challenge remains to differentiate benign and malignant lesions. Based on recent research, acoustic angiography, a novel contrast-enhanced ultrasound imaging technique, can provide high-resolution visualization of tissue microvasculature and has demonstrated the ability to differentiate vascular characteristics between healthy and tumor tissue in preclinical studies. We hypothesize that transrectal acoustic angiography may enhance the assessment of prostate cancer. In this paper, we describe the development of a dual frequency, dual-layer colinear array transducer for transrectal acoustic angiography. The probe consists of 64 transmitting (TX) elements with a center frequency of 3 MHz and 128 receiving (RX) elements with a center frequency of 15 MHz. The dimensions of the array are 18 mm in azimuth and 9 mm in elevation. The pitch is $280~\mu \text{m}$ for TX elements and 140 $\mu \text{m}$ for RX elements. Pulse-echo tests of TX/RX elements and aperture acoustic field measurements were conducted, and both results were compared with the simulation results. Real-time contrast imaging was performed using a Verasonics system and a tissue-mimicking phantom. Nonlinear acoustic responses from microbubble contrast agents at a depth of 35 mm were clearly observed. In vivo imaging in a rodent model demonstrated the ability to detect individual vessels underneath the skin. These results indicate the potential use of the array described herein for acoustic angiography imaging of prostate tumor and identification of regions of neovascularization for the guidance of prostate biopsies. [ABSTRACT FROM AUTHOR]

Techniques to image the microvasculature may play an important role in imaging tumor-related angiogenesis and vasa vasorum associated with vulnerable atherosclerotic plaques. However, the microvasculature associated with these pathologies is difficult to detect using traditional B-mode ultrasound or even harmonic imaging due to small vessel size and poor differentiation from surrounding tissue. Acoustic angiography, a microvascular imaging technique that utilizes superharmonic imaging (detection of higher order harmonics of microbubble response), can yield a much higher contrast-to-tissue ratio than second harmonic imaging methods. In this paper, two dual-frequency transducers using lateral mode transmitters were developed for superharmonic detection and acoustic angiography imaging in intracavity applications. A single element dual-frequency intravascular ultrasound transducer was developed for concept validation, which achieved larger signal amplitude, better contrast-to-noise ratio (CNR), and pulselength compared to the previous work. A dual-frequency [Pb(Mg1/3Nb2/3)O3]–x[PbTiO3] array transducer was then developed for superharmonic imaging with dynamic focusing. The axial and lateral sizes of the microbubbles in a 200- \mu \textm tube were measured to be 269 and 200~\mu \textm , respectively. The maximum CNR was calculated to be 22 dB. These results show that superharmonic imaging with a low frequency lateral mode transmitter is a feasible alternative to thickness mode transmitters when the final transducer size requirements dictate design choices. [ABSTRACT FROM AUTHOR]

Ultrasound imaging with high resolution and large penetration depth has been increasingly adopted in medical diagnosis, surgery guidance, and treatment assessment. Conventional ultrasound works at a particular frequency, with a - 6\text-dB fractional bandwidth of \sim\text70\% , limiting the imaging resolution or depth of field. In this paper, a bifrequency colinear array with resonant frequencies of 8 and 20 MHz was investigated to meet the requirements of resolution and penetration depth for a broad range of ultrasound imaging applications. Specifically, a 32-element bifrequency colinear array was designed and fabricated, followed by element characterization and real-time sectorial scan (S-scan) phantom imaging using a Verasonics system. The bifrequency colinear array was tested in four different modes by switching between low and high frequencies on transmit and receive. The four modes included the following: 1) transmit low, receive low; 2) transmit low, receive high; 3) transmit high, receive low; and 4) transmit high, receive high. After testing, the axial and lateral resolutions of all modes were calculated and compared. The results of this study suggest that bifrequency colinear arrays are potential aids for wideband fundamental imaging and harmonic/subharmonic imaging. [ABSTRACT FROM PUBLISHER]

Noncontact ultrasonic detection technology is an effective method to detect damage in time. This paper proposes a noncontact damage detection system based on air-coupled ultrasound and full-field laser vibrometer, which realizes the excitation of relatively single-mode guided waves and the wavefield automatic detection. The system performance is verified through experiments, and the experimental wavenumber is consistent with the theoretical dispersion characteristics of the Lamb wave in the A0 mode. Based on this system, the topography reconstruction algorithms, including the Wavenumber Filtering Algorithm and Spatial Wavenumber Algorithm, were tested and compared with the aluminum alloy plate and the carbon fiber reinforced polymer plate. The results show that, based on the air-coupled ultrasound and full-field laser vibrometer detection system, the Spatial Wavenumber Algorithm has better imaging error and contrast, and the damage edge detection is smoother. [ABSTRACT FROM AUTHOR]

To conduct burst-echo imaging with air-coupled capacitive micromachined ultrasonic transducers (CMUTs) using the same elements in transmission and reception, this work proposes a dedicated and integrated front-end circuit board design to build an imaging system. To the best of the authors' knowledge, this is the first air-coupled CMUT burst-echo imaging using the same elements in transmission and reception. The reported front-end circuit board, controlled by field programmable gate array (FPGA), consisted of four parts: an on-board pulser, a bias-tee, a T/R switch and an amplifier. Working with our 217 kHz 16-element air-coupled CMUT array under 100 V DC bias, the front-end circuit board and imaging system could achieve 22.94 dB signal-to-noise ratio (SNR) in burst-echo imaging in air, which could represent the surface morphology and the three-dimensional form factor of the target. In addition, the burst-echo imaging range of our air-coupled CMUT imaging system, which could work between 52 and 273 mm, was discussed. This work suggests good potential for ultrasound imaging and gesture recognition applications. [ABSTRACT FROM AUTHOR]