Search

Polyethylene (PE) is the most commonly used plastic type in the world, contributing significantly to the plastic waste crisis. Microbial degradation of PE in natural environments is unlikely due to its inert saturated carbon‐carbon backbones, which are difficult to break down by enzymes, challenging the development of a biocatalytic recycling method for PE waste. Here, we demonstrated the depolymerization of low‐molecular‐weight (LMW) PE using an enzyme cascade that included a catalase‐peroxidase, an alcohol dehydrogenase, a Baeyer Villiger monooxygenase, and a lipase after the polymer was chemically pretreated with m‐chloroperoxybenzoic acid (mCPBA) and ultrasonication. In a preparative experiment with gram‐scale pretreated polymers, GC‐MS and weight loss determinations confirmed ~27 % polymer conversion including the formation of medium‐size functionalized molecules such as ω‐hydroxycarboxylic acids and α,ω‐carboxylic acids. Additional analyses of LMWPE‐nanoparticles using AFM showed that enzymatic depolymerization reduced the sizes of these mCPBA‐ and enzyme‐treated LMWPE‐nanoparticles. This multi‐enzyme catalytic concept with distinct chemical steps represents a unique starting point for future development of bio‐based recycling methods for polyolefin waste. [ABSTRACT FROM AUTHOR]

Highlights: Two Aspergillus isolates from bitumen grow well on extra-heavy crude oil. Extracellular enzymes of both fungi efficiently degrade extra-heavy oil fractions. Hydrocarbon redistribution co-occurs with biogas and organic acid formation. Oil properties are enzymatically improved by viscosity reduction and demetallization. Heavy crude oil (HCO) and extra-heavy crude oil (EHCO) with high viscosity and density pose enormous challenges to the exploitation of oil reserves. While bacteria are increasingly used in biocatalytic upgrading of HCO and EHCO, less attention has been paid to the potential of fungi. The aim of this study was to ascertain the role of fungal extracellular enzymes from Aspergillus spp. In the biodegradation of EHCO and their application potential for enhanced oil recovery. A. terreus HJ2 and A. nidulans HJ4 with the ability to biodegrade HCO were previously isolated from bitumen enrichment cultures. Both strains grew well on EHCO agar plates supplemented with a small amount of soluble starch (0.2%) and yeast extract (0.3%). Extracellular enzymes from each strain separately, as well as mixtures of the enzymes, exhibited EHCO degradation activity, leading to redistribution of hydrocarbons with substantial formation of biogases and organic acids in a 7-day period. Enzymatic degradation resulted in decreased contents of resins and asphaltenes, accompanied by increased contents of saturates and aromatics. Gas chromatography–mass spectrometry revealed distinct redistribution patterns of n-alkane in the biotreated oil. Enzymatic degradation additionally caused considerable reduction in oil viscosity (by 12.7%) and heavy metal concentrations (Ni, by 44.1%; Fe, by 54.0%; V, by 31.6%). The results provide empirical evidence for the application potential of fungal extracellular enzymes from Aspergillus spp. in EHCO recovery and biocatalytic upgrading of EHCO. [ABSTRACT FROM AUTHOR]

As plastics become more ubiquitous, their impact on the environment and on human health cannot be overlooked. Once generated, micro‐ and nano‐plastics end‐up in the environment, causing widespread health and environmental risks. This is a significant environmental problem given the minuscule sizes of microplastics, and therefore warrants further investigation. This study presents a comprehensive review of the ecotoxicology of microplastics and methods for their degradation and decomposition besides discussing the fate and transport processes, recent progress, emerging strategies, challenges and potential future directions. The authors carefully evaluate the processes through which microplastics cause harm, from molecular interactions in species, to ecological impacts, and end with advances in microplastic biodegradation. Different kinds of microplastics found in the environment include polyethylene, polystyrene, polypropylene, polyvinyl chloride, polycarbonate, polyurethane, polypropylene, and polyethylene terephthalate. Analysis of microbial and enzymatic decomposition provides several swelling mitigation strategies designed to reduce environmental threats. In‐depth investigations of microplastic ecotoxicity and biodegradation are being facilitated by interdisciplinary proposals in the areas of nanotechnology, new analytical methods, and synthetic biology. The extensive study helps understand microplastics comprehensively which in‐turn ensures informed actions to mitigate the challenge of the environmental impact of microplastics for sustainable future. [ABSTRACT FROM AUTHOR]

A variety of important agricultural crops host fungi from the Aspergillus genus can produce cancerogenic secondary metabolites such as aflatoxins. Consequently, novel strategies for detoxification and their removal from food and feed chains are required. Here, detoxification of Aflatoxin B1 (AFB1) by the Bacillus subtilis multi-copper oxidase CotA (BsCotA) was investigated. This laccase was recombinantly produced in E. coli while codon optimization led to duplication of the amount of active protein obtained. CuCl2 was added to the cultivation medium leading to a 25-fold increase of Vmax corresponding to improved incorporation of Cu2+ into the enzyme protein which is essential for the catalytic reaction. To avoid potential cytotoxicity of Cu2+, cultivation was performed at microaerobic conditions indeed leading to 100x more functional protein when compared to standard aerobic conditions. This was indicated by an increase of Vmax from 0.30 ± 0.02 to 33.56 ± 2.02 U/mg. Degradation kinetics of AFB1 using HPLC with fluorescence detection (HPLC-FLD) analysis indicated a theoretical substrate saturation above solubility in water. At a relatively high concentration of 500 μg/L, AFB1 was decomposed at 10.75 μg/Lh (0.17 nmol*min−1*mg−1) at a dosage of 0.2 μM BsCotA. AFQ1 and epi-AFQ1 were identified as the initial oxidation products according to mass spectrometry (i.e., HPLC-MS, HPLC-QTOF). None of these molecules were substrates for laccase but both decomposed in buffer. However, decomposition does not seem to be due to hydration of the vinyl ether in the terminal furan ring. Genotoxicity of the formed AFB1 was assessed in several dilutions based on the de-repression of the bacterial SOS response to DNA damage indicating about 80-times reduction in toxicity when compared to AFQ1. The results of this study indicate that BsCotA has high potential for the biological detoxification of aflatoxin B1. [ABSTRACT FROM AUTHOR]

Mycotoxins are secondary metabolites produced by fungi during their growth. They not only seriously affect the yield of food crops but also pose a threat to human and animal health. Physical and chemical methods have been widely used to reduce the production and accumulation of mycotoxins in the field or after harvest, but these methods have difficulty in completely removing mycotoxins while keeping the nutrients at the same time. Biodegradation methods using isolated enzymes have shown superiority and potential for modest reaction conditions, high degradation efficiency and degradation products with low toxicity. Therefore, the occurrence, chemical structures, and toxicology of six prevalent mycotoxins (deoxynivalenol, zearalenone, aflatoxin, patulin, fumonisin, and ochratoxin) were described in this manuscript. The identification and application of mycotoxin-degrading enzymes were thoroughly reviewed. It is believed that in the near future, mycotoxin-degrading enzymes are expected to be commercially developed and used in the feed and food industries. [ABSTRACT FROM AUTHOR]

A variety of important agricultural crops host fungi from the Aspergillus genus can produce cancerogenic secondary metabolites such as aflatoxins. Consequently, novel strategies for detoxification and their removal from food and feed chains are required. Here, detoxification of Aflatoxin B1 (AFB1) by the Bacillus subtilis multi-copper oxidase CotA (BsCotA) was investigated. This laccase was recombinantly produced in E. coli while codon optimization led to duplication of the amount of active protein obtained. CuCl2 was added to the cultivation medium leading to a 25-fold increase of Vmax corresponding to improved incorporation of Cu2+ into the enzyme protein which is essential for the catalytic reaction. To avoid potential cytotoxicity of Cu2+, cultivation was performed at microaerobic conditions indeed leading to 100x more functional protein when compared to standard aerobic conditions. This was indicated by an increase of Vmax from 0.30 ± 0.02 to 33.56 ± 2.02 U/mg. Degradation kinetics of AFB1 using HPLC with fluorescence detection (HPLC-FLD) analysis indicated a theoretical substrate saturation above solubility in water. At a relatively high concentration of 500 µg/L, AFB1 was decomposed at 10.75 µg/Lh (0.17 nmol.min-1*mg-1) at a dosage of 0.2µM BsCotA. AFQ1 and epi-AFQ1 were identified as the initial oxidation products according to mass spectrometry (i.e., HPLC-MS, HPLC-QTOF). None of these molecules were substrates for laccase but both decomposed in buffer. However, decomposition does not seem to be due to hydration of the vinyl ether in the terminal furan ring. Genotoxicity of the formed AFB1 was assessed in several dilutions based on the de-repression of the bacterial SOS response to DNA damage indicating about 80-times reduction in toxicity when compared to AFQ1. The results of this study indicate that BsCotA has high potential for the biological detoxification of aflatoxin B1. [ABSTRACT FROM AUTHOR]

A variety of important agricultural crops host fungi from the Aspergillus genus can produce cancerogenic secondary metabolites such as aflatoxins. Consequently, novel strategies for detoxification and their removal from food and feed chains are required. Here, detoxification of Aflatoxin B1 (AFB1) by the Bacillus subtilis multi-copper oxidase CotA (BsCotA) was investigated. This laccase was recombinantly produced in E. coli while codon optimization led to duplication of the amount of active protein obtained. CuCl2 was added to the cultivation medium leading to a 25-fold increase of Vmax corresponding to improved incorporation of Cu2+ into the enzyme protein which is essential for the catalytic reaction. To avoid potential cytotoxicity of Cu2+, cultivation was performed at microaerobic conditions indeed leading to lOOx more functional protein when compared to standard aerobic conditions. This was indicated by an increase of Vmax from 0.30 ± 0.02 to 33.56 ± 2.02 U/mg. Degradation kinetics of AFB1 using HPLC with fluorescence detection (HPLC-FLD) analysis indicated a theoretical substrate saturation above solubility in water. Ata relatively high concentration of 500 µg/L, AFB1 was decomposed at 10.75 µg/Lh (0.17 nmol*min-1*mg-1) at a dosage of 0.2 µM BsCotA. AFQ1 and epi-AFQl were identified as the initial oxidation products according to mass spectrometry (i.e., HPLC-MS, HPLC-QTOF). None of these molecules were substrates for laccase but both decomposed in buffer. However, decomposition does not seem to be due to hydration of the vinyl ether in the terminal furan ring. Genotoxicity of the formed AFB1 was assessed in several dilutions based on the de-repression of the bacterial SOS response to DNA damage indicating about 80-times reduction in toxicity when compared to AFQ1. The results of this study indicate that BsCotA has high potential for the biological detoxification of aflatoxin B1. [ABSTRACT FROM AUTHOR]

Although Alzheimer's disease (AD) is traditionally viewed as a central nervous system disorder driven by the cerebral accumulation of toxic beta-amyloid (Aβ) peptide, new interpretations of the amyloid cascade hypothesis have led to the recognition of the dynamic equilibrium in which Aβ resides and the importance of peripheral Aβ production and degradation in maintaining healthy Aβ levels. Our review sheds light on the critical role of peripheral organs, particularly the liver, in the metabolism and clearance of circulating Aβ. We explore the mechanisms of Aβ transport across the blood–brain barrier (BBB) via transport proteins such as LRP1 and P-glycoprotein. We also examine how peripheral clearance mechanisms, including enzymatic degradation and phagocytic activity, impact Aβ homeostasis. Our review also discusses potential therapeutic strategies targeting peripheral Aβ clearance pathways. By enhancing these pathways, we propose a novel approach to reducing cerebral Aβ burden, potentially slowing AD progression. [ABSTRACT FROM AUTHOR]

A series of partially bio-based and biodegradable poly(propylene terephthalate-co-adipate) (PPTA) random copolymers with different components were prepared by the melt polycondensation of petro-based adipic acid and terephthalic acid with bio-based 1,3-propanediol. The microstructure, crystallization behavior, thermal properties, and enzymatic degradation properties were further investigated. The thermal decomposition kinetics was deeply analyzed using Friedman's method, with the thermal degradation activation energy ranging from 297.8 to 302.1 kJ/mol. The crystallinity and wettability of the copolymers decreased with the increase in the content of the third unit, but they were lower than those of the homopolymer. The thermal degradation activation energy E, carbon residue, and reaction level n all showed a decreasing trend. Meanwhile, the initial thermal decomposition temperature (Td) was higher than 350 °C, which can meet the requirements for processing and use. The PPTA copolymer material still showed excellent thermal stability. Adding PA units could regulate the crystallinity, wettability, and degradation rate of PPTA copolymers. The composition of PPTA copolymers in different degradation cycles was characterized by 1H NMR analysis. Further, the copolymers' surface morphology during the process of enzymatic degradation also was observed by scanning electron microscopy (SEM). The copolymers' enzymatic degradation accorded with the surface degradation mechanism. The copolymers showed significant degradation behavior within 30 days, and the rate increased with increasing PA content when the PA content exceeded 45.36%. [ABSTRACT FROM AUTHOR]

The lysine p-toluenesulfonic acid ionic liquid ([Lys][p-TSA]), one kinds of amino acid ionic liquids, was synthesized by one-step method, which was employed to control the interfacial structure and degradation behavior of poly(lactide)/poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends. The [Lys][p-TSA] was incorporated into PLA/PBAT blends with different contents by melt blending, and the effect of [Lys][P-TSA] on the interfacial structure, thermal stability, crystallization behavior, rheological behavior and degradation behavior of PLA/PBAT blends were investigated. The SEM results demonstrate that [Lys][p-TSA] could enhance the compatibility between PLA and PBAT in the PLA/PBAT blends. Thermal gravimetric results showed that the incorporation of [Lys][p-TSA] into PLA/PBAT blends could not affect their thermal stability. Differential scanning calorimetry (DSC) measurements showed that [Lys][p-TSA] can improve the crystallinity of PLA, and the rheological behavior of the blends indicated that [Lys][p-TSA] can enhance the chain mobility of PLA and PBAT. More importantly, the degradation behavior of the blends revealed that [Lys][p-TSA] could affect the distribution of lipase in PLA/PBAT blends, so that the relative degradation rate of each component of the blends was well-controlled. As the [Lys][p-TSA] content increased, the degradation rate of the PLA/PBAT blend in phosphate buffered saline (PBS) solution, artificial seawater, porcine pancreas lipase (PPL) solution and Candida antarctica lipase B (CALB) solution was enhanced. When the contents of [Lys][p-TSA] was 4 phr in the PLA/PBAT blend, the weight loss of the blend in PPL enzyme solution reached to 31.59% after 49 days, which was 3.79 times higher than that of PLA/PBAT blend without [Lys][p-TSA]. The enzymatic degradation mechanism of the blends was studied by density functional theory (DFT) and 1H nuclear magnetic resonance (NMR), and it was found that [Lys][p-TSA] could control the distribution of lipase in the blends, which accelerated the enzymatic degradation of the PLA/PBAT blend. This study could provide some new way on enhancing the properties of PLA/PBAT blends while reducing the harm of microplastics. [ABSTRACT FROM AUTHOR]

Objective: The goal of this systematic review was to identify the mechanisms associated with the enzymatic degradation of collagen and gelatin biomaterials and the possible associated flaws. Methods: Four databases (PubMed, B-On, Cochrane Library, and ResearchGate) were used for the bibliographic search of articles. The research question was formulated using the PCC method, (P): collagen or gelatin sponges, hydrogels, and scaffolds; concept (C): enzymatic degradation of collagen or gelatin sponges, hydrogels, and scaffolds; and context (C): effect of enzymatic action on degradation time of collagen or gelatin sponges, hydrogels, and scaffolds. The search was contextualized according to PRISMA recommendations. The identification and exclusion of evidence followed the PRISMA criteria, with specific inclusion and exclusion factors being stipulated for the selection of articles. The risk of bias assessment was performed using the QUIN Scale. Results: The initial search was composed of 13,830 articles after removing duplicates; 56 articles followed for the full-text reading; 45 were excluded; then, 11 articles were obtained, constituting the results of this systematic review. All studies evaluated the materials using gravimetric analysis, and collagenases were the proteases used for the degradation solution. The materials tested were as follows: human-like collagen (HLC) hydrogel with microbial transglutaminase (MTGase), gelatin sponges subjected to different types of crosslinking, and collagen scaffolds with different types of crosslinking. The period of analysis varied between 0.25 h and 35 days. It was possible to highlight the lack of uniformity in the protocols used, which varied largely, thus influencing the degradation times. The risk of bias was low in nine studies and medium in two studies. Conclusions: This systematic review identified a gap in the literature, highlighting the absence of in vitro studies using human saliva and a collagenase concentration close to the physiological levels to simulate oral dynamics. However, based on existing literature, the mechanisms associated with collagen enzymatic degradation in collagen and gelatin biomaterials were comprehensively understood, answering the first research question postulated. In response to the second research question, the main shortcomings identified in the laboratory evaluation of mechanisms associated with collagen enzymatic degradation in collagen and gelatin biomaterials included the lack of standardization in degradation test protocols; this limited inter-study comparisons, which increased heterogeneity. Additionally, variations in collagenase concentrations and types influenced collagen degradation rates, and inappropriate evaluation intervals hindered the identification of total degradation time. [ABSTRACT FROM AUTHOR]

Polycyclic aromatic hydrocarbons (PAHs) are widespread, persistent, and toxic environmental pollutants. Many anthropogenic and some natural factors contribute to the spread and accumulation of PAHs in aquatic and soil systems. The effective and environmentally friendly remediation of these chemical compounds is an important and challenging problem that has kept scientists busy over the last few decades. This review briefly summarizes data on the main sources of PAHs, their toxicity to living organisms, and physical and chemical approaches to the remediation of PAHs. The basic idea behind existing approaches to the bioremediation of PAHs is outlined with an emphasis on a detailed description of the use of bacterial strains as individual isolates, consortia, or cell-free enzymatic agents. [ABSTRACT FROM AUTHOR]

The design of eco‐friendly active food packaging systems based on biobased polymeric materials is a growing field of research because of the pressing concern for sustainable development. Herein, monolayer ternary thermoplastic films composed of poly(lactic acid) (PLA), gallic acid (GA, 2.5% w/w relative to PLA), and a plasticizer (poly(ethylene glycol) [PEG] or epoxidized linseed oil [ELO], 5.0 and 7.5% w/w relative to PLA) are prepared via melt‐mixing followed by compression molding. The ensuing plasticized and self‐standing PLA/GA films are translucent and have good mechanical properties (Young's modulus ~2 GPa) and welding performance. The incorporation of GA yields films with ultraviolet‐light barrier properties (transmittance below 40%, 200–400 nm), antioxidant capacity (radical scavenging activity above 94%), and antibacterial activity against the methicillin‐resistant strain of Staphylococcus aureus (minimum of 3‐log reduction colony forming units mL−1). These thermoplastic films are easily degradable via enzymatic degradation with proteinase K from Tritirachium album, reaching weight loss values of 100% after 9 days. The films plasticized with PEG present slightly better antibacterial action and enzymatic degradation, whereas those plasticized with ELO exhibit marginally higher surface hydrophobicity and thermal stability. Thus, the combination between PLA and GA yielded biobased films with bioactive properties that have potential for application in active food packaging. [ABSTRACT FROM AUTHOR]

In recent years, the demand for sustainable and degradable materials and electronic devices has increased significantly. Among a range of biodegradable polymers, poly(lactic acid) (PLA) is a good alternative to conventional petrol-based polymers because of its attractive mechanical properties and its easy processability. Recently, PLA has also been described as a promising dielectric material with piezoelectric and electret properties. We expect that PLA—after further optimization—will play an important role as a material for environmentally friendly sensors in the future, where first applications such as air filters and pressure sensors have already been proposed. However, degradation under normal ambient conditions is very slow, and an accelerated and controllable degradation process is highly desirable for any type of PLA-based sensors. Enzymatic hydrolysis with embedded enzymes has been proposed as an approach to accelerate and control degradation. In this work, we investigate the properties of PLA in terms of dielectric and mechanical properties with a focus on its ability to store charges after the enzyme proteinase K (Trit. album) has been incorporated. Results reveal that proteinase K has a positive effect on the charge stability of solvent-cast PLA electrets after complete evaporation of the solvent. Furthermore, we observed a concentration-dependent acceleration of mass loss in a Tris-HCl buffer. A fast degradation within only one day occurred at a concentration of 6 wt% proteinase K. [ABSTRACT FROM AUTHOR]

Plastic pollution has become a global problem since the extensive use of plastic in industries such as packaging, electronics, manufacturing and construction, healthcare, transportation, and others. This has resulted in an environmental burden that is continually growing, which has inspired many scientists as well as environmentalists to come up with creative solutions to deal with this problem. Numerous studies have been reviewed to determine practical, affordable, and environmentally friendly solutions to regulate plastic waste by leveraging microbes' innate abilities to naturally decompose polymers. Enzymatic breakdown of plastics has been proposed to serve this goal since the discovery of enzymes from microbial sources that truly interact with plastic in its naturalistic environment and because it is a much faster and more effective method than others. The scope of diverse microbes and associated enzymes in polymer breakdown is highlighted in the current review. The use of co-cultures or microbial consortium-based techniques for the improved breakdown of plastic products and the generation of high-value end products that may be utilized as prototypes of bioenergy sources is highlighted. The review also offers a thorough overview of the developments in the microbiological and enzymatic biological degradation of plastics, as well as several elements that impact this process for the survival of our planet. [ABSTRACT FROM AUTHOR]

In the present study, a new degraded konjac glucomannan (DKGM) was prepared using a crude enzyme from abalone (Haliotis discus hannai) viscera, and its physicochemical properties were investigated. After enzymatic hydrolysis, the viscosity of KGM obviously decreased from 15,500 mPa·s to 398 mPa·s. The rheological properties analysis of KGM and DKGMs revealed that they were pseudoplastic fluids, and pseudoplasticity, viscoelasticity, melting temperature, and gelling temperature significantly decreased after enzymatic hydrolysis, especially for KGM-180 and KGM-240. In addition, the molecular weight of KGM decreased from 1.80 × 106 Da, to 0.45 × 106 Da and the polydispersity index increased from 1.17 to 1.83 after 240 min of degradation time. Compared with natural KGM, the smaller particle size distribution of DKGM further suggests enzyme hydrolysis reduces the aggregation of molecular chains with low molecular weight. FT-IR and FESEM analyses showed that the fragmented KMG chain did not affect the structural characteristics of molecular monomers; however, the dense three-dimensional network microstructure formed by intermolecular interaction changed to fragment microstructure after enzyme hydrolysis. These results revealed that the viscosity and rheological properties of KGM could be controlled and effectively changed using crude enzymes from abalone viscera. This work provides theoretical guidance for the promising application of DKGM in the food industry. [ABSTRACT FROM AUTHOR]

Resulting properties of cotton and polyester blends make polycotton the most common fabric in textile industry. Separation technologies are key for the chemical processing of the massive amount of polycotton waste produced worldwide. The very different chemical nature of cellulose and polyethylene terephthalate determines the fractionation strategies to obtain two valuable monomaterial streams. In this work, we propose separation pathways seeking the conversion both polymers. First, polyester was depolymerised into its monomeric units through catalytic alkaline hydrolysis. The combined effect of alkali concentration and the catalyst was analysed to overcome the hydrophobic nature of polyester and optimise its conversion rate minimising the damaged caused to the cellulose chains. Conversion rates up to 80% were reached in a single separation stage with a limited effect of the polymer chain distribution of cellulose which remains a fiber-grade feedstock. Alternatively, cellulose was fully removed by selective dissolution in ionic solvent and subsequent filtration resulting in a spinnable mixture. Finally, enzymatic treatments for the conversion of cellulose into fermentable sugars were studied. Single stage conversions of 65% were achieved after maximizing the enzymatic activity. Structural and spectroscopic analysis showed that crystalline domains of textile-grade cotton limit the enzymatic activity. Optimal fractionation process is, in our view, highly context dependent what conveys to seek a variety of alternatives seeking for chemical processes driven by the ulterior up-cycling of the monomaterial streams [ABSTRACT FROM AUTHOR]

Drug addiction is a pervasive problem worldwide. It not only affects the abuser's life, but also poses a serious threat to public health. Accordingly, there is a strong demand for the development of novel and effective therapies for drug addiction. Considering that small-molecule drugs have only had limited success, there is great interest in developing alternative strategies that extend the reach of small-molecule-based therapies. The antibody-based trapping approach and the enzyme catalytic strategy have been considered as promising ways to reduce the euphoria of drug users by altering drug pharmacokinetics and decreasing drug concentrations in the central nervous system. However, these biological macromolecules are generally unstable and their in vivo half-lives are short. With the rapid development of gene editing technologies, it is possible to perform ex vivo gene therapy for the long-term and stable delivery of enzymes and other effector proteins, which could free abusers from frequent injections of therapeutics. By constructing programmed gene switches that regulate spatiotemporal gene expression in response to illicit drugs, this perspective proposed the concept of preventing drug addiction by the drug itself. This strategy enables the controlled release of therapeutic proteins in vivo and is expected to improve patient safety and compliance. This will open up new opportunities for next-generation medicine and hold great promise for expanding our ability to treat drug addiction. [ABSTRACT FROM AUTHOR]

Livestock blood, typically considered a waste byproduct of the slaughter industry, has the potential to be a valuable resource in the environmental and agricultural industries owing to its high protein content. This study reports the mechanisms involved in developing a continuous process capable of processing 5 tons/day of livestock blood into high purity amino acid liquid fertilizer and dried protein feedstuff simultaneously. Large-scale processing units were fabricated for the ultrasonic pretreatment and solubilization of proteins, enzymatic degradation of dissolved proteins for amino acid conversion, solid-liquid separation using a membrane filter press to produce high purity amino acid liquid fertilizer, and microwave drying of the solid component to produce dry protein feedstuff. The main processing units were integrated into a continuous, efficient system. The final amino acid liquid fertilizer and dry protein feedstuff contained >20% amino acids and approximately 78% protein, respectively. An economic feasibility analysis of the integrated system based on an annual processing capacity of 3000 tons of livestock blood yielded a total annual profit of 17.4 million euros (5812 euros/ton). This study presents an efficient and profitable approach to repurposing the waste generated by slaughterhouses toward agriculture and feed production. [ABSTRACT FROM AUTHOR]

A versatile and robust end‐group derivatization approach using oximes has been developed for the detection of oxidative degradation of synthetic polyisoprenes and polybutadiene. This method demonstrates broad applicability, effectively monitoring degradation across a wide molecular weight range through ultraviolet (UV)‐detection coupled to gel permeation chromatography. Importantly, it enables the effective monitoring of degradation via derivatization‐induced UV‐maximum shifts, even in the presence of an excess of undegraded polyene, overcoming limitations previously reported with refractive index detectors. Notably, this oxime‐based derivatization methodology is used in enzymatic degradation experiments of synthetic polyisoprenes characterized by a cis: trans ratio with the rubber oxygenase LcpK30. It reveals substantial UV absorption in derivatized enzymatic degradation products of polyisoprene with molecular weights exceeding 1000 g mol−1 ‐ an unprecedented revelation for this enzyme's activity on such synthetic polyisoprenes. This innovative approach holds promise as a valuable tool for advancing research into the degradation of synthetic polyisoprenes and polybutadiene, particularly under conditions of low organocatalytic or enzymatic degradation activity. With its broad applicability and capacity to reveal previously hidden degradation processes, it represents a noteworthy contribution to sustainable polymer chemistry. [ABSTRACT FROM AUTHOR]

Orange peel and sugar beet pulp contain large quantities of pectin, which can be turned via galactaric acid into furan dicarboxylic acid (FDCA) and its esters. In this work, we show the polymerisation of these FDCA esters into high‐molecular‐weight, 70–100 kg/mol, poly(ethylene 2,5‐furanoate) (PEF). PEF is an emerging bio‐based alternative for poly(ethylene terephthalate) (PET), widely used in for example packaging applications. Closing the loop, we also demonstrated and confirmed that PEF can be hydrolysed by enzymes, which are known to hydrolyse PET, back into FDCA for convenient recycling and recovery of monomers. [ABSTRACT FROM AUTHOR]

Background: The stability of resin–dentin interfaces is still highly questionable. The aim of this study was to evaluate the effect of Salvadora persica on resin–dentin bond durability. Materials and methods: Extracted human third molars were used to provide mid-coronal dentin, which was treated with 20% Salvadora persica extract for 1 min after acid-etching. Microtensile bond strength and interfacial nanoleakage were evaluated after 24 h and 6 months. A three-point flexure test was used to measure the stiffness of completely demineralized dentin sticks before and after treatment with Salvadora persica extract. The hydroxyproline release test was also used to measure collagen degradation by endogenous dentin proteases. Statistical analysis was performed using two-way ANOVA followed by post hoc Bonferroni test and unpaired t-test. P-values < 0.05 were considered statistically significant. Results: The use of Salvadora persica as an additional primer with etch-and-rinse adhesive did not affect the immediate bond strengths and nanoleakage (p > 0.05). After 6 months, the bond strength of the control group decreased (p = 0.007), and nanoleakage increased (p = 0.006), while Salvadora persica group showed no significant difference in bond strength and nanoleakage compared to their 24 h groups (p > 0.05). Salvadora persica increased dentin stiffness and decreased collagen degradation (p < 0.001) compared to their controls. Conclusion: Salvadora persica extract pretreatment of acid-etched dentin preserved resin–dentin bonded interface for 6 months. Clinical significance: Durability of resin-dentin bonded interfaces is still highly questionable. Endogenous dentinal matrix metalloproteinases play an important role in degradation of dentinal collagen within such interfaces. Salvadora persica may preserve resin-dentin interfaces for longer periods of time contributing to greater clinical success and longevity of resin composite restorations. [ABSTRACT FROM AUTHOR]

Livestock blood, a major organic waste generated by the livestock industry, poses a risk of pollution due to its rapid decomposition. However, it is a potential protein source for agricultural purposes due to its protein-rich organic matter. In this study, we conducted studies on an eco-friendly, scalable, and effective protein degradation process using livestock blood to reduce waste and produce an amino acid liquid fertilizer that can be recycled for agricultural use. Ultrasonic technology was applied as a pretreatment method to improve the enzymatic hydrolysis efficiency of proteins in livestock blood, and the optimal conditions that led to 95.91% solubilization rate of hemoglobin were ultrasound duration for 30 min at an ultrasound density of 0.5 W/mL. As a result of hydrolyzing ultrasonically pretreated blood by mixing exo- and endo-type proteolytic enzymes, the optimal combination was a mixture of Savinase® 1% and Flavourzyme® 1%. After 4 h of reaction, the protein concentration was 27.8 mg/mL and the amino acid concentration was confirmed to be 54.6 mg/mL. This is about 4.2 times higher than the amino acid concentration of blood without ultrasound pretreatment, 13.1 mg/mL, and it was confirmed that sonication has a significant effect on improving protein degradation efficiency. As protein degradation increased, the viscosity of blood gradually decreased, suggesting that the physical force applied to the agitator torque diminished during the enzyme reaction; a significant correlation between protein and amino acid concentrations (biological factors) and torque (mechanical factor) was observed. Measuring torque during an enzyme reaction can confirm the extent of the enzyme reaction, so it can be used as an indicator of reaction progress when scaling up the process in the future. [ABSTRACT FROM AUTHOR]

Background: The abdominal aortic aneurysm (AAA) is defined as an increase in aortic diameter by more than 50% and is associated with a high risk of rupture and mortality without treatment. The aim of this study is to analyze the role of aortic adventitial collagen photocrosslinking by UV-A irradiation on the biomechanical profile of the aortic wall. Methods: This experimental study is structured in two parts: the first part includes in vitro uniaxial biomechanical evaluation of porcine adventitial tissue subjected to either short-term elastolysis or long-term collagenolysis in an attempt to duplicate two extreme situations as putative stages of aneurysmal degeneration. In the second part, we included biaxial biomechanical evaluation of in vitro human abdominal aortic adventitia and human AAA adventitia specimens. Biomechanical profiles were examined for porcine and human aortic tissue before and after irradiation with UV-A light (365 nm wavelength). Results: On the porcine aortic sample, the enhancing effect of irradiation was evident both on the tissue subjected to elastolysis, which had a high collagen-to-elastin ratio, and on the tissue subjected to prolonged collagenolysis despite being considerably depleted in collagen. Further, the effect of irradiation was conclusively demonstrated in the human adventitia samples, where significant post-irradiation increases in Cauchy stress (longitudinal axis: p = 0.001, circumferential axis: p = 0.004) and Young's modulus (longitudinal axis: p = 0.03, circumferential axis: p = 0.004) were recorded. Moreover, we have a stronger increase in the strengthening of the AAA adventitia samples following the exposure to UV-A irradiation (p = 0.007) and a statistically significant but not very important increase (p = 0.021) regarding the stiffness in the circumferential axis. Conclusions: The favorable effect of UV irradiation on the strength and stiffness of degraded aortic adventitia in experimental situations mimicking early and later stages of aneurysmal degeneration is essential for the development and potential success of procedures to prevent aneurysmal ruptures. The experiments on human normal and aneurysmal adventitial tissue confirmed the validity and potential success of a procedure based on exposure to UV-A radiation. [ABSTRACT FROM AUTHOR]

Biotechnology offers the potential for selective depolymerization of natural and synthetic fibers, isolation of components, or recovery of monomers. This progress solves the problems associated with the regeneration of monomers from synthetic fiber blends, especially when contaminated or mixed fibers are involved. In addition, the recycling of used fiber products into higher-value products not only keeps waste out of landfills but also creates economic opportunities and reduces the need to produce new synthetic fibers. Synthetic fibers can be recovered by mechanical or chemical recycling, but biotechnological solutions with enzymes offer a more environmentally friendly alternative to harsh chemicals by selectively breaking down certain chemical bonds in polymers to obtain purer monomeric building blocks. Efficient biotechnological recycling, however, depends on the specific polymer, as different enzymes, microbial colonies, fungal hyphae, etc. can process different man-made fibers. Challenges arise with any type of fiber recovery, including enzymatic degradation when suitable enzymes have not yet been discovered or when fiber blends impede accessibility and efficiency. This short review provides an overview of the possibilities of biotechnological solutions for synthetic fiber recovery. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the behavior of chitosan/quaternized chitosan fibers in media mimicking wound exudates to understand their capacities as wound dressing. Fiber analysis of the fibers using dynamic vapor sorption proved their ability to adsorb moisture up to 60% and then to desorb it as a function of humidity, indicating their outstanding breathability. Dissolution analyses showed that quaternized chitosan leached from the fibers in water and PBS, whereas only small portions of chitosan were solubilized in water. In media containing lysozyme, the fibers degraded with a rate determined by their composition and pH, reaching a mass loss of up to 47% in media of physiologic pH. Notably, in media mimicking the wound exudate during healing, they adsorbed moisture even when their mass loss due to biodegradation was high, whereas they were completely degraded in the media of normal tissues, indicating bioabsorbable dressing capacities. A mathematical model was constructed, which characterized the degradation rate and morphology changes of chitosan/quaternized chitosan fibers through analyses of dynamics in scale space, using the Theory of Scale Relativity. The model was validated using experimental data, making it possible to generalize it to the degradation of other biopolymeric systems that address wound healing. [ABSTRACT FROM AUTHOR]

Currently, special attention is being paid to research on the use of residual biomass of Aspergillus fungi as a substrate for the production of food and feed ingredients. The most promising method is biocatalytic conversion of mycelial biomass polymers, which increases the availability of biologically valuable cell components. The objective of the present study to develop conditions for the enzymatic destruction of cell wall polysaccharides and protein substances of fungal biomass and secondary raw materials of enzyme production, to obtain peptide-amino acid ingredients. It has been established that the use of the enzymatic system, including intracellular proteinases and peptidases and a complex of exogenous β-glucanases, as well as regulation of the duration of their exposure, provide for the production of fermentolysates with a given structural fractional composition. Molecular mass (MM) distribution studies of peptide fractions in the fungal biomass of fermentolysates showed that over 6 h of hydrolysis, the proportion of peptides with MM over 29.0 kDa decreased by 2.8 times, and over 12 h, by 4.7 times. The content of low molecular weight peptides with MM less than 1.6 kDa increased 1.4 times, which accounted for 47.9% of the total. Comparative analysis of the spectra of peptides with MM less than 1000 Da in enzyme isolates of fungal biomass after 6 and 12 h of hydrolysis showed significant differences in their compositions. The contents of peptides with MM less than 500 Da and of free amino acids increase with an increase in hydrolysis duration by 1.6 times. The results confirm the promise of creating functional ingredients and dietary supplements enriched in a peptide–amino acid component with a predominant content of free amino acids and short bioactive peptides resulting from enzymatic treatment of fungal biomass. [ABSTRACT FROM AUTHOR]

Polyethylene (PE) is a convenient and inexpensive polymer that is widely used in daily life. However, PE products are recalcitrant to degradation in the environment, leading to increasing plastic pollution. This has inspired the search for effective microorganisms and enzymes that can biodegrade PE. In this study, a fungal strain that degrades PE was isolated from soil contaminated with plastic and identified as Trichoderma harzianum. The strain was cultured with PE as the sole carbon source for 30 days, and the weight loss of PE particles was 3.39 ± 0.3%. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectra showed holes and oxygenated functional groups on the surface of the degraded PE particles. Gas chromatography–mass spectrometry (GC–MS) detected products with different carbon atom numbers. In addition, a potential PE degrading enzyme was screened from T. harzianum and identified as laccase. After PE was incubated with the recombinant laccase for 96 h, SEM, FTIR, and GC–MS showed the degradation of PE particles. The results showed that T. harzianum had the ability to degrade PE, which probably was attributed to the laccase produced by this strain. This study contributes promising tools for the degradation of PE enzyme. [ABSTRACT FROM AUTHOR]

Volumizing fillers aim to create or restore facial volume in fat layers. To provide strong tissue lifting and long-term persistence, gels are generally designed with stiff properties, characterized by a high storage modulus (G′). However, clinical evidence shows a discrepancy between high G′ and good lifting capacities, especially after skin tension has been exerted on the gel. To better explore the in vivo behavior of a gel, we first evaluated the elastic moduli of five commercial volumizers (RHA4, JUVVOL, RESVOL, RESLYFT, and BELVOL) in dynamic compression mode, E′. We further developed a Projection Index score based on the rheological assessment of creep in compression to mimic skin tension-induced stress relaxation (flattening). Finally, the ability of a gel to resist enzymatic degradation was analyzed with a multidose approach. Despite similar clinical indications, volumizers exhibited distinct behaviors. RHA4 and BELVOL showed the highest E′ values (resistance to strain), RHA4, JUVVOL, and RESVOL exhibited the greatest projection capacities, while JUVVOL and RHA4 offered the largest persistence to enzymatic degradation. In this article, we introduce the use of the Projection Index to efficiently assess the ability of a gel to lift tissues, thus increasing preclinical models' efficiency and reducing the need for animal studies. [ABSTRACT FROM AUTHOR]

Enzymatic polyethylene terephthalate (PET) recycling processes are gaining interest for their low environmental impact, use of mild conditions, and specificity. Furthermore, PET hydrolase enzymes are continuously being discovered and engineered. In this work, we studied a PET hydrolase (PET2), initially characterized as an alkaline thermostable lipase. PET2 was produced in a fusion form with a 6-histidine tag in the N-terminal. The PET2 activity on aromatic terephthalate and new indole-based polyesters was evaluated using polymers in powder form. Compared with IsPETase, an enzyme derived from Ideonella sakaiensis, PET2 showed a lower PET depolymerization yield. However, interestingly, PET2 produced significantly higher polybutylene terephthalate (PBT) and polyhexylene terephthalate (PHT) depolymerization yields. A clear preference was found for aromatic indole-derived polyesters over non-aromatic ones. No activity was detected on Akestra™, an amorphous copolyester with spiroacetal structures. Docking studies suggest that a narrower and more hydrophobic active site reduces its activity on PET but favors its interaction with PBT and PHT. Understanding the enzyme preferences of polymers will contribute to their effective use to depolymerize different types of polyesters. [ABSTRACT FROM AUTHOR]

Background: The excellent physicochemical and biomedical properties make silk fibroin (SF) suitable for the development of biomedical materials. In this research, the silk fibroin microspheres (SFMS) were customized in two size ranges, and then carried gold nanoparticles or doxorubicin to evaluate the performance of drug loading and releasing. Embolization efficiency was evaluated in rat caudal artery and rabbit auricular artery, and the in vivo distribution of iodinated SFMS (125I/131I-SFMS) after embolization of rat hepatic artery was dynamically recorded by SPECT. Transhepatic arterial radioembolization (TARE) with 131I-SFMS was performed on rat models with liver cancer. The whole procedure of selective internal radiation was recorded with SPECT/CT, and the therapeutic effects were evaluated with 18 F-FDG PET/CT. Lastly, the enzymatic degradation was recorded and followed with the evaluation of particle size on clearance of sub-micron silk fibroin. Results: SFMS were of smooth surface and regular shape with pervasive pores on the surface and inside the microspheres, and of suitable size range for TAE. Drug-loading functionalized SFMS with chemotherapy or radio-sensitization, and the enhanced therapeutic effects were proved in treating HUH-7 cells as lasting doxorubicin release or more lethal radiation. For artery embolization, SFMS effectively blocked the blood supply; when 131I-SFMS serving as the embolic agent, the good labeling stability and embolization performance guaranteed the favorable therapeutic effects in treating in situ liver tumor. At the 5th day post TARE with 37 MBq/3 mg 131I-SFMS per mice, tumor activity was quickly inhibited to a comparable glucose metabolism level with surrounding normal liver. More importantly, for the fragments of biodegradable SFMS, smaller sized SF (< 800 nm) metabolized in gastrointestinal tract and excreted by the urinary system, while SF (> 800 nm) entered the liver within 72 h for further metabolism. Conclusion: The feasibility of SFMS as degradable TARE agent for liver cancer was primarily proved as providing multiple therapeutic potentials. [ABSTRACT FROM AUTHOR]

Sulfoxaflor (SUL, [N-[methyloxido[1-[6-(trifluoromethyl)-3-pyridinyl] ethyl]-λ4-sulfanylidene] cyanamide]) is a widely used systemic insecticide, and its residue has frequently been detected in the environment, posing a potential threat to the environment. In this study, Pseudaminobacter salicylatoxidans CGMCC 1.17248 rapidly converted SUL into X11719474 via a hydration pathway mediated by two nitrile hydratases (AnhA and AnhB). Extensive (96.4%) degradation of 0.83 mmol/L SUL was achieved by P. salicylatoxidans CGMCC 1.17248 resting cells within 30 min (half-life of SUL 6.4 min). Cell immobilization by entrapment into calcium alginate remediated 82.8% of the SUL in 90 min, and almost no SUL was observed in surface water after incubation for 3 h. P. salicylatoxidans NHases AnhA and AnhB both hydrolyzed SUL to X11719474, although AnhA exhibited much better catalytic performance. The genome sequence of P. salicylatoxidans CGMCC 1.17248 revealed that this strain could efficiently eliminate nitrile-containing insecticides and adapt to harsh environments. We firstly found that UV irradiation transforms SUL to the derivatives X11719474 and X11721061, and the potential reaction pathways were proposed. These results further deepen our understanding of the mechanisms of SUL degradation as well as the environmental fate of SUL. [ABSTRACT FROM AUTHOR]

Polylactides (PLAs) and lactide copolymers are biodegradable, compostable, and derived from renewable resources, offering a sustainable alternative to petroleum-based synthetic polymers owing to their advantages of comparable mechanical properties with commodity plastics and biodegradability. Their hydrolytic stability and thermal properties can affect their potential for long-lasting applications. However, stereocomplex crystallization is a robust method between isomer PLAs that allows significant amelioration in copolymer properties, such as thermal stability, mechanical properties, and biocompatibility, through substantial intermolecular interactions amid l-lactyl and d-lactyl sequences, which have been the key approach to initial degradation rate and further PLA applications. It was demonstrated that the essential parameters affecting stereocomplexation are the mixing ratio and the chain length of each unit sequence. This study deals with the molecular weight, one of the specific interactions between isomers of PLAs. A solution polymerization method was applied to control molecular weight and chain architecture. The stereocomplexation was monitored with DSC. It was confirmed that the lower molecular weight polymer showed a higher degradation rate, as a hydrolyzed fragment having a molecular weight below a certain length dissolves into the water. To systematically explore the critical contribution of molecular weights, the Langmuir system was used to observe the stereocomplexation effect and the overall degradation rate. [ABSTRACT FROM AUTHOR]

The regulation of the biodegradation rate of 3D‐regenerated silk fibroin scaffolds and the avoidance of premature collapse are important concerns for their effective applications in tissue engineering. In this study, bromelain, which is specific to sericin, was used to remove sericin from silk, and high molecular weight silk fibroin was obtained after the fibroin fibers were dissolved. Afterwards, a 3D scaffold was prepared via freeze‐drying. The Sodium dodecyl sulfate–polyacrylamide gel electrophoresis results showed that the average molecular weight of the regenerated silk fibroin prepared by using the bromelain‐degumming method was approximately 142.2 kDa, which was significantly higher than that of the control groups prepared by using the urea‐ and Na2CO3‐degumming methods. The results of enzyme degradation in vitro showed that the biodegradation rate and internal three‐dimensional structure collapse of the bromelain‐degumming fibroin scaffolds were significantly slower than those of the two control scaffolds. The proliferation activity of human umbilical vein vascular endothelial cells inoculated in bromelain‐degumming fibroin scaffolds was significantly higher than that of the control scaffolds. This study provides a novel preparation method for 3D‐regenerated silk fibroin scaffolds that can effectively resist biodegradation, continuously guide cell growth, have good biocompatibility, and have the potential to be used for the regeneration of various connective tissues. [ABSTRACT FROM AUTHOR]

Among biodegradable polymers, polylactides (PLAs) have attracted considerable interest because the monomer can be produced from renewable resources. Since their initial degradability strongly affects commercial application fields, it is necessary to manage the degradation properties of PLAs to make them more commercially attractive. To control their degradability, poly(lactide-co-glycolide) (PLGA) copolymers of glycolide and isomer lactides (LAs) were synthesized, and their enzymatic and alkaline degradation rates of PLGA monolayers as functions of glycolide acid (GA) composition were systematically investigated by the Langmuir technique. The results showed that the alkaline and enzymatic degradations of PLGA monolayers were faster than those of l-polylactide (l-PLA), even though proteinase K is selectively effective in the l-lactide (l-LA) unit. Alkaline hydrolysis was strongly affected by their hydrophilicity, while the surface pressure of monolayers for enzymatic degradations was a major factor. [ABSTRACT FROM AUTHOR]

It is well acknowledged that microplastics are a major environmental problem and that the use of plastics, both petro- and bio- based, should be reduced. Nevertheless, it is also a necessity to reduce the amount of the already spread plastics. These cannot be easily degraded in the nature and accumulate in the food supply chain with major danger for animals and human life. It has been shown in the literature that advanced oxidation processes (AOPs) modify the surface of polylactic acid (PLA) materials in a way that bacteria more efficiently dock on their surface and eventually degrade them. In the present work we investigated the influence of different AOPs (ultrasounds, ultraviolet irradiation, and their combination) on the biodegradability of PLA films treated for different times between 1 and 6 h. The pre-treated samples have been degraded using a home model compost as well as a cocktail of commercial enzymes at mesophilic temperatures (37 °C and 42 °C, respectively). Degradation degree has been measured and degradation products have been identified. Excellent degradation of PLA films has been achieved with enzyme cocktail containing commercial alkaline proteases and lipases of up to 90% weight loss. For the first time, we also report valorization of PLA into bacterial nanocellulose after enzymatic hydrolysis of the samples. [ABSTRACT FROM AUTHOR]

Biological degradation of mycotoxins is a promising environmentally-friendly alternative to chemical and physical detoxification methods. To date, a lot of microorganisms able to degrade them have been described; however, the number of studies determining degradation mechanisms and irreversibility of transformation, identifying resulting metabolites, and evaluating in vivo efficiency and safety of such biodegradation is significantly lower. At the same time, these data are crucial for the evaluation of the potential of the practical application of such microorganisms as mycotoxin-decontaminating agents or sources of mycotoxin-degrading enzymes. To date, there are no published reviews, which would be focused only on mycotoxin-degrading microorganisms with the proved irreversible transformation of these compounds into less toxic compounds. In this review, the existing information about microorganisms able to efficiently transform the three most common fusariotoxins (zearalenone, deoxinyvalenol, and fumonisin B1) is presented with allowance for the data on the corresponding irreversible transformation pathways, produced metabolites, and/or toxicity reduction. The recent data on the enzymes responsible for the irreversible transformation of these fusariotoxins are also presented, and the promising future trends in the studies in this area are discussed. [ABSTRACT FROM AUTHOR]

This paper provides the enzymatic degradation behavior of the polylactide (PLA)/poly(butylene succinate) (PBS) blend systems by using their respective enzymes, proteinase K and lipase. In a previous report, l-PLA/PBS blend monolayers with ≥ 50 mol% l-PLA showed good compatibility and a slow hydrolytic rate. To support this study, the degradation behavior of the PLA/PBS blend systems was confirmed with Langmuir technique and AFM. The blend system with poor compatibility showed rapid degradability. However, as the amount of PLA exceeded 50 mol%, the degradation was insignificant because partial compatibility between the two polymers lowered the degradation rate of PBS. [ABSTRACT FROM AUTHOR]

Copyright of China Plastics / Zhongguo Suliao is the property of Journal Office of CHINA PLASTICS and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Plastics / Zhongguo Suliao is the property of Journal Office of CHINA PLASTICS and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Bio‐based polymer materials are considered to have function of protecting the environment, and improving the degradation performance of bio‐based polymer materials is of great significance to realize the green cycle of production‐use‐degradation of plastic products. This present work is focused on the investigation of the degradation behavior of bio‐based polymer blend poly(ethylene 2,5‐furandicarboxylate) /polyglycolide acid (PEF/PGA) with different composition ratios in phosphate‐buffered saline (PBS solution, pH = 7.4) with 0.5 mg/mL of lipase from porcine pancreas. The results observed that the thermal decomposition temperatures at 5% weight loss of both the PEF/PGA blends are higher than 310°C, which reflected that the PEF/PGA blends possessed excellent thermal stability. The water absorption of the PEF/PGA blends continued to increase with increasing the PGA content. This trend is consistent with the mass loss of blends in the degradation process. The systematic degradation study revealed that the neat PEF showed no mass loss in both PBS solution with and without lipase, while the PEF/PGA blends possessed a faster rate under enzymatic degradation circumstance in the first 4 weeks, and the weight loss in the same degradation period increase with increasing the PGA content due to the erosion of lipase on the polymer chain. In particular, the weight loss of PEFGA40 blend was more than 18.33% after 8 weeks of degradation in enzyme solution. 1H NMR results showed that in addition to PGA component as a major component of degradation, a small amount of PEF component was also involved in the mass loss of the blend during degradation. At the same time, the short‐chain segment produced during the degradation had a clear plasticizing effect on the PEFGA blends, which is reflected in that the Tg of PEFGA40 blend decreased first and then increased with the increase of degradation time. [ABSTRACT FROM AUTHOR]

Many strategies have been adopted to prepare silica materials with highly controlled structures, typically using sol–gel chemistry. Frequently, the alkoxysilanes used in sol–gel chemistry are based on monoalcohols, e.g., Si(OEt)4. The structural control over silica synthesis achieved by these precursors is highly sensitive to pH and solvency. Alkoxysilanes derived from the sugar alcohol glycerol (diglycerylsilane) react more slowly and with much less sensitivity to pH. We report that, in the presence of cooled aqueous starch solutions, glyceroxysilanes undergo transesterification with the sugars on starch, leading to (hollow) microtubules resembling worms of about 400 nm in diameter. The tubes arise from the pre-assembly of starch bundles, which occurs only well below room temperature. It is straightforward to treat the first-formed starch/silica composite with the enzyme amylase to, in a programmed fashion, increasingly expose porosity, including the worm morphology, while washing away untethered silica and digested starch to leave an open, highly porous materials. Sintering at 600 °C completely removes the starch silane moieties. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Food Safety & Quality is the property of Journal of Food Safety & Quality Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The influence of storage conditions on the mechanical recycling of pre-consumer waste (PRE-CW) from the manufacture of multilayer packaging films starting from starch compounds using a renewable-based polymer with PCL and PBAT, which are biodegradable conventional-based polyesters, was studied. It was found that, unlike materials based on conventional-origin polymers that accumulate in the environment for hundreds of years, the studied compounds degraded, even in the solid state, duringstorage in unventilated spaces and during the rainy hot summers with alternatingheat and rain. The degradation of the mechanically recycled compounds obtained from PRE-CW stored in such conditions was highlighted by the comparative analysis with the primary compounds, which proved the following: specific FTIR spectra changes; 2–3-times higher melt fluidity than for primary compounds; melting in successive processes over the entire positive temperatures range, up to 115 °C, such as in cases of compositional de-mixing of incompatible blends, faced to a single melting endotherm with a maximum at around 120 °C for the primar thermal degradation with the movement of the main destruction stages towards higher temperatures; a high quantity residue at 750 °C in air; dispersed mechanical resistance properties y compounds; crystallization at temperatures 10 °C–15 °C higher. The elimination of storage before the mechanical recycling of the pre-consumer waste from this type of polymeric compound fabrication is a way to increase the mechanical recycling efficiency while obtaining new materials with functional properties required by the applications. [ABSTRACT FROM AUTHOR]

Study on degradation behaviors of biodegradable poly(butylene adipate‐co‐terephthalate) (PBAT) blended with different compositions of thermoplastic starch (TPS) under soil burial and natural weathering environments is vital in order to predict the product service‐life and planning for in situ biodegradation after product disposal. In this article, different compositions of TPS (0%, 20%, 40%, 50%, and 60%) were compounded with PBAT using single screw extruder. The samples were characterized for their tensile properties, fractured surface morphology, water barrier and surface hydrophorbicity properties in order to investigate the effect of starch fractions in PBAT blends. The degradation behavior under natural weathering and soil burial conditions was also determined during the 9 months duration by observing the change of physical appearance, weight loss, surface morphology, chemical structural, and tensile properties. The findings showed that the addition of TPS (20%, 40%, 50%, and 60%) had led to a reduction in tensile strength (41.47%, 60.53%, 63.43%, and 68.53%), and reduction in elongation at break (42.92%, 92.1%, 92.23%, and 93.22%, respectively) and water barrier properties. The findings also showed that there were distinct degradation behavior under both conditions. Upon exposure to natural weathering, photodegradation and Norrish type I & II occurred whereas under the soil burial condition, hydrolytic, and enzymatic degradation take places. Sample with the highest starch contents underwent the highest weight loss and reduction in tensile properties under both environments. The findings in this study are useful in order to investigate the feasibility of PBAT/Tapioca starch blends for biodegradable plastic film for various industrial applications especially in packaging and agricultural mulch. [ABSTRACT FROM AUTHOR]

The overuse of antibiotics has widely induced the development of antibiotic resistance in pathogens and, in turn, has induced the inefficiency of antibiotic drugs, which is a major health issue. The dissemination of antibiotic resistance genes is influenced by extracellular DNA degradation, yet the effect of endocrine disruptors such as phthalates on this process is unclear. Here, we investigated the DNA degradation in the presence of five typical phthalates, dimethyl phthalate, diethyl phthalate, dibutyl phthalate, and bis(2-ethylhexyl) phthalate, benzyl butyl phthalate, by gel electrophoresis, spectroscopy, atomic force microscopy, and molecular dynamics simulations. Results show that phthalates inhibit DNA enzymatic degradation. The maximum inhibition rates of phthalates on deoxyribonuclease I enzymatic activity were up to 83% for dimethyl phthalate, 64% for diethyl phthalate, 60% for dibutyl phthalate, 77% for bis(2-ethylhexyl) phthalate, and 88% for benzyl butyl phthalate. This finding is explained by phthalate binding to amino groups in deoxyribonuclease I amino acid residues by van der Waals forces and hydrogen bonding. This leads to the alteration of the helix structure and to structural deformation of deoxyribonuclease I, which in turn causes the decrease of its enzymatic activity. This binding interaction mainly contributed to the inhibition of DNA degradation. Overall, our results suggest that some pollutants may amplify antibiotic resistance by inhibiting DNA degradation. [ABSTRACT FROM AUTHOR]

The large amount of waste synthetic polyester plastics has complicated waste management and also endangering the environment due to improper littering. In this study, a novel carboxylesterase from Thermobacillus composti KWC4 (Tcca) was identified, heterologously expressed in Escherichia coli, purified and characterized with various plastic substrates. Irregular grooves were detected on polybutylene adipate terephthalate (PBAT) film by scanning electron microscopy (SEM) after Tcca treatment, and Tcca can also hydrolyze short–chain diester bis(hydroxyethyl) terephthalate (BHET). The optimal pH and temperature for Tcca were 7.0 and 40 °C, respectively. In order to explore its catalytic mechanism and improve its potential for plastic hydrolysis, we modeled the protein structure of Tcca and compared it with its homologous structures, and we identified positions that might be crucial for the binding of substrates. We generated a variety of Tcca variants by mutating these key positions; the variant F325A exhibited a more than 1.4–fold improvement in PBAT hydrolytic activity, and E80A exhibited a more than 4.1–fold increase in BHET activity when compared to the wild type. Tcca and its variants demonstrated future applicability for the recycling of bioplastic waste containing a PBAT fraction. [ABSTRACT FROM AUTHOR]

Minimally invasive hyaluronan (HA) tissue fillers are routinely employed to provide tissue projection and correct age-related skin depressions. HA fillers can advantageously be degraded by hyaluronidase (HAase) administration in case of adverse events. However, clear guidelines regarding the optimal dosage and mode of administration of HAase are missing, leaving a scientific gap for practitioners in their daily practice. In this study, we implemented a novel rheological procedure to rationally evaluate soft tissue filler degradability and optimize their degradation kinetics. TEOSYAL RHA® filler degradation kinetics in contact with HAase was monitored in real-time by rheological time sweeps. Gels were shown to degrade as a function of enzymatic activity, HA concentration, and BDDE content, with a concomitant loss of their viscoelastic properties. We further demonstrated that repeated administration of small HAase doses improved HA degradation kinetics over large single doses. Mathematical analyses were developed to evaluate the degradation potential of an enzyme. Finally, we tuned the optimal time between injections and number of enzymatic units, maximizing degradation kinetics. In this study, we have established a scientific rationale for the degradation of HA fillers by multidose HAase administration that could serve as a basis for future clinical management of adverse events. [ABSTRACT FROM AUTHOR]

The cellulolytic system of Clostridium cellulovorans mainly consisting of a cellulosome that synergistically collaborates with non-complexed enzymes was investigated using cellulosic biomass. The cellulosomes were isolated from the culture supernatants with shredded paper, rice straw and sugarcane bagasse using crystalline cellulose. Enzyme solutions, including the cellulosome fractions, were analyzed by SDS-PAGE and Western blot using an anti-CbpA antibody. As a result, C. cellulovorans was able to completely degrade shredded paper for 9 days and to be continuously cultivated by the addition of new culture medium containing shredded paper, indicating, through TLC analysis, that its degradative products were glucose and cellobiose. Regarding the rice straw and sugarcane bagasse, while the degradative activity of rice straw was most active using the cellulosome in the culture supernatant of rice straw medium, that of sugarcane bagasse was most active using the cellulosome from the supernatant of cellobiose medium. Based on these results, no alcohols were found when C. acetobutylicum was cultivated in the absence of C. cellulovorans as it cannot degrade the cellulose. While 1.5 mM of ethanol was produced with C. cellulovorans cultivation, both n-butanol (1.67 mM) and ethanol (1.89 mM) were detected with the cocultivation of C. cellulovorans and C. acetobutylicum. Regarding the enzymatic activity evaluation against rice straw and sugarcane bagasse, the rice straw cellulosome fraction was the most active when compared against rice straw. Furthermore, since we attempted to choose reaction conditions more efficiently for the degradation of sugarcane bagasse, a wet jet milling device together with L-cysteine as a reducing agent was used. As a result, we found that the degradation activity was almost twice as high with 10 mM L-cysteine compared with without it. These results will provide new insights for biomass utilization. [ABSTRACT FROM AUTHOR]

Application of thermoplastic fiber-reinforced lightweight composite materials provides a wide range of advantages that are of particular importance for the mobility sector. UD tapes composed of unidirectionally (UD) oriented inorganic fibers embedded in a thermoplastic matrix represent light-weight materials with high tensile strength. This publication addresses recycling aspects of novel UD tape made of a combination of basalt fibers and different PLA (polylactic acid) formulations. The kinetics of enzyme-based separation of polymer from the fiber were investigated. Different types of UD tapes with a thickness of 270-290 μm reinforced with basalt fiber weight ratios ranging between 51 and 63% were incubated at 37 °C in buffer solution (pH 7.4) containing proteinase K. The influence of enzyme concentration, tape weight per incubation tube, proteinase K activators, and tape types on the rate of enzymatic decomposition was investigated. Enzyme activity was measured by analyzing lactate concentration with lactate dehydrogenase and by measuring weight loss of the composite material. The rate of lactate release increased in the first 30 min of incubation and remained stable for at least 90 min. Weight loss of 4% within 4 h was achieved for a tape with 56% (w/w) fiber content. For a sample with a surface area of 3 cm² in a buffer volume of 10 mL, the rate of lactate release as a function of enzyme concentration reached saturation at 300 μg enzyme/mL. With this enzyme concentration, the rate of lactate release increased in a linear manner for tape surface areas between 1 and 5 cm². Four tapes with different PLA types were treated with the enzyme for 17 h. Weight loss ranged between 7 and 24%. Urea at a concentration of 0.5% (w/v) increased lactate release by a factor of 9. Pretreatment of tapes in alkaline medium before enzymatic degradation increased weight loss to 14% compared to 5% without pretreatment. It is concluded that enzymatic PLA hydrolysis from UD tapes is a promising technology for the release of basalt fibers after alkaline pretreatment or for the final cleaning of basalt fibers. [ABSTRACT FROM AUTHOR]