Search

This work presents a new approach for studying crack growth resulting from fatigue, which utilizes the plastic contribution of crack-tip opening displacement (CTODp). CTODp is used to predict austenitic stainless-steel crack propagation. Unlike linear elastic fracture mechanics analysis, the method presented here is also helpful for tasks other than small-scale yielding. The approach was based on correlating full-field displacement information with post-processing digital images. This work describes a detailed post-processing protocol that can be used to calculate CTODp. The results for steel compact-tension specimens were especially promising. Of note, there was a linear relationship between the propagation rate of fatigue cracks and the CTODp range.

Accurate knowledge of the plastic zone of fatigue cracks is a very direct and effective way to quantify the damage of components subjected to cyclic loads. In this work, we propose an ultra-fine experimental characterisation of the plastic zone based on Vickers micro-indentations. The methodology is applied to different compact tension (CT) specimens made of aluminium alloy 2024-T351 subjected to increasing stress intensity factors. The experimental work and sensitivity analysis showed that polishing the surface to #3 μm surface finish and applying a 25 g-force load for 15 s produced the best results in terms of resolution and quality of the data. The methodology allowed the size and shape of both the cyclic and the monotonic plastic zones to be visualised through 2D contour maps. Comparison with Westergaard’s analytical model indicates that the methodology, in general, overestimates the plastic zone. Comparison with S355 low carbon steel suggests that the methodology works best for alloys exhibiting a high strain hardening ratio.

In this work, the multiaxial fatigue behaviour of 316 and 304 stainless steel was studied. The study was based on the critical plane approach which is based on observations that cracks tend to nucleate and grow in specific planes. Three different critical plane models were employed to this end, namely Fatemi−Socie (FS), Smith−Watson−Topper (SWT) and the newly proposed Sandip−Kallmeyer−Smith (SKS) model. The study allowed equi-biaxial stress state, mean strain and non−proportional hardening effects to be taken into consideration. Experimental tests including different combinations of tension, torsion and inner pressure were performed and were useful to identify the predominant failure mode for the two materials. The results also showed that the SKS damage parameter returned more conservative results than FS with lower scatter level in both materials, with prediction values between FS and SWT.

This work analyses the prediction capabilities of a recently developed critical plane model, called the SKS method. The study uses multiaxial fatigue data for S355-J2G3 steel, with in-phase and 90° out-of-phase sinusoidal axial-torsional straining in both the low cycle fatigue and high cycle fatigue ranges. The SKS damage parameter includes the effect of hardening, mean shear stress and the interaction between shear and normal stress on the critical plane. The collapse and the prediction capabilities of the SKS critical plane damage parameter are compared to well-established critical plane models, namely Wang-Brown, Fatemi-Socie, Liu I and Liu II models. The differences between models are discussed in detail from the basis of the methodology and the life results. The collapse capacity of the SKS damage parameter presents the best results. The SKS model produced the second-best results for the different types of multiaxial loads studied.