Search

Abstract In this report, we present the development of a copper nanofiber network-based microheater, designed for applications in electron microscopes, gas sensing, and cell culture platforms. The seed layer, essential for electroless deposition, was fabricated through the electrospinning of a palladium-contained polyvinylpyrrolidone solution followed by a heat treatment. This process minimized the contact resistance between nanofibers. We successfully fabricated a microheater with evenly distributed temperature by controlling the electrospinning time, heat treatment conditions, and electroless deposition time. We assessed the electrical and thermal characteristics of the microheater by examining the nanofiber density, sheet resistance, and transmittance. The microheater’s performance was evaluated by applying current, and we verified its capacity to heat up to a maximum of 350 °C. We further observed the microheater’s temperature distribution at varying current levels through an infrared camera. The entire manufacturing procedure takes place under normal pressure, eliminating the need for masking or etching processes. This renders the method easily adaptable to the mass production of microdevices. The method is expected to be applicable to various materials and sizes and is cost-effective compared to commercially produced microheaters developed through microelectromechanical system processes, which demand complex facilities and high cost.

Abstract Surface wetting, the phenomenon where a liquid spreads or adheres to a solid surface, plays a crucial role in both natural and technological fields. This study focuses on elucidating the relationship between surface properties and wetting behavior, emphasizing the significance of hierarchical structures. A 3D hierarchical structure is created by controlling shape and size through electroplating and chemical reactions, adjusted by current intensity, ammonium persulfate, and ammonium hydroxide concentrations. This modification is achieved by modifying the surface's chemical properties. This control directly impacted the surface wetting properties, providing a means to regulate wetting behavior by altering surface structure. Through control of surface chemistry, a superhydrophilic surface is able to successfully create with a contact angle of 0° and a superhydrophobic surface with a contact angle of 171.3.

Abstract Structural color was generated using electrospinning and hydrothermal growth of zinc oxide (ZnO). An aligned seed layer was prepared by electrospinning, and the hydrothermal growth time control was adjusted to generate various structural colors. The structural color changed according to the angle of the incident light. When the light was parallel to the direction of the aligned nanofibers, no pattern was observed. This pattern is referred to as an “optical switching pattern.” Replication using polydimethylsiloxane (PDMS) also enabled the generation of structural colors; this is an attractive approach for mass production. Additionally, the process is quite tunable because additional syntheses and etching can be performed after the patterns have been fabricated.

Abstract We report a simple method for electrospinning polymers onto flexible, insulating substrates by controlling the wettability of the substrate surface. Water molecules were adsorbed onto the surface of a hydrophilic polymer substrate by increasing the local humidity around the substrate. The adsorbed water was used as the ground electrode for electrospinning. The electrospun fibers were deposited only onto hydrophilic areas of the substrate, allowing for patterning through wettability control. Direct writing of polymer fiber was also possible through near-field electrospinning onto a hydrophilic surface.

Skin is the largest sensory organ and receives information from external stimuli. Human body signals have been monitored using wearable devices, which are gradually being replaced by electronic skin (E-skin). We assessed the basic technologies from two points of view: sensing mechanism and material. Firstly, E-skins were fabricated using a tactile sensor. Secondly, E-skin sensors were composed of an active component performing actual functions and a flexible component that served as a substrate. Based on the above fabrication processes, the technologies that need more development were introduced. All of these techniques, which achieve high performance in different ways, are covered briefly in this paper. We expect that patients’ quality of life can be improved by the application of E-skin devices, which represent an applied advanced technology for real-time bio- and health signal monitoring. The advanced E-skins are convenient and suitable to be applied in the fields of medicine, military and environmental monitoring.

The paper is concerned with complex fuzzy numbers and complex fuzzy inner product spaces. In the classical complex number set, a complex number can be expressed using the Cartesian form or polar form. Both expressions are needed because one expression is better than the other depending on the situation. Likewise, the Cartesian form and the polar form can be defined in a complex fuzzy number set. First, the complex fuzzy numbers (CFNs) are categorized into two types, the polar form and the Cartesian form, as type I and type II. The properties of the complex fuzzy number set of those two expressions are discussed, and how the expressions can be used practically is shown through an example. Second, we study the complex fuzzy inner product structure in each category and find the non-existence of an inner product on CFNs of type I. Several properties of the fuzzy inner product space for type II are proposed from the modulus that is newly defined. Specfically, the Cauchy-Schwartz inequality for type II is proven in a compact way, not only the one for fuzzy real numbers. In fact, it was already discussed by Hasanhani et al; however, they proved every case in a very complicated way. In this paper, we prove the Cauchy-Schwartz inequality in a much simpler way from a general point of view. Finally, we introduce a complex fuzzy scalar product for the generalization of a complex fuzzy inner product and propose to study the condition for its existence on CFNs of type I.

First, we show that the non-trivial fuzzy inner product space under the linearity condition does not exist, which means a fuzzy inner product space with linearity produces only a crisp real number for each pair of vectors. If the positive-definiteness is added to the condition, then the Cauchy–Schwartz inequality is also proved.

Gecko-like synthetic dry adhesives (SDAs) have adhesion comparable to that of a real Gecko’s foot, but with very low durability. To address this problem, self-cleaning or stiff core embedding methods have been proposed. However, the proposed methods require special locomotion or complicated manufacturing. In this study, we suggested a metal coating on synthetic dry adhesives to improve durability. SDAs were fabricated via PDMS. Then, metals such as indium, zinc, and gold were coated on the SDAs. The adhesion tests show that the indium- and zinc-coated microstructures have a higher shear adhesion strength than the noncoated ones. Also, the shear adhesion strength of noncoated SDAs was only 14.5% of the initial strength while that of the zinc-coated ones was 35.6% after 200 times of attachment and detachment. We could find PDMS debris and fractures on noncoated SDAs, which results in weakening of the adhesion strength. On the other hand, a relatively high hardness, strength, and stiffness of the zinc coating layers reduced the wear and fractures of the micropatterns, which led to an improved durability in the SDAs. From these tests, we can conclude that the metal coating method could improve the durability of the SDAs.

Brain‒machine interface (BMI) is a promising technology that looks set to contribute to the development of artificial limbs and new input devices by integrating various recent technological advances, including neural electrodes, wireless communication, signal analysis, and robot control. Neural electrodes are a key technological component of BMI, as they can record the rapid and numerous signals emitted by neurons. To receive stable, consistent, and accurate signals, electrodes are designed in accordance with various templates using diverse materials. With the development of microelectromechanical systems (MEMS) technology, electrodes have become more integrated, and their performance has gradually evolved through surface modification and advances in biotechnology. In this paper, we review the development of the extracellular/intracellular type of in vitro microelectrode array (MEA) to investigate neural interface technology and the penetrating/surface (non-penetrating) type of in vivo electrodes. We briefly examine the history and study the recently developed shapes and various uses of the electrode. Also, electrode materials and surface modification techniques are reviewed to measure high-quality neural signals that can be used in BMI.

Abstract In this study, we synthesized an organic electrochemical transistor (OECT) using dielectrophoresis of a carbon nanotube-Nafion (CNT-Nafion) suspension. Dielectrophoretically aligned nanowires formed a one-dimensional submicron bundle between triangular electrodes. The CNT-Nafion composite nanowire bundles showed p-type semiconductor characteristics. The drain-source current decreased with increasing gate voltage. The nanowire bundles showed potential as pH sensor because the drain-source current ratio varied linearly according to the gate voltage in pH buffers.

Abstract Carbon nanotube (CNT) is an attractive material for needle-like conducting electrodes because it has high electrical conductivity and mechanical strength. However, CNTs cannot provide the desired properties in certain applications. To obtain micro- and nanoneedles having the desired properties, it is necessary to fabricate functional needles using various other materials. In this study, functional micro- and nanoneedle electrodes were fabricated using a tungsten tip and an atomic force microscope probe with a CNT needle template and electrodeposition. To prepare the conductive needle templates, a single-wall nanotube nanoneedle was attached onto the conductive tip using dielectrophoresis and surface tension. Through electrodeposition, Au, Ni, and polypyrrole were each coated successfully onto CNT nanoneedle electrodes to obtain the desired properties.