Search

For several years, research has been devoted to the issue of abiotic reuse of excavated bottom sediments from waterways, reservoirs, harbors and estuaries in the construction industry. Dredged sediment can be used for various purposes depending on its chemical composition and physical properties. In connection with the aforementioned sand crisis, it can be used as a substitute for filler in the preparation of concrete mixtures. The contribution is aimed at evaluating the strength characteristics of cement composites prepared with 20% replacement of aggregates of the fraction 0-4 mm with sediment from the water reservoirs Kľušov and Ružín (Slovakia). The results showed the potential of using sediments as a partial substitute for aggregates in cement compositions.

The heavy metal removal from wastewater is very important due to their persistent character in aquatic environment. The use of wooden sawdust is emerging as a potential alternative to the existing conventional technologies for the removal of metal ions from aqueous solutions. The aim of this work is to study the Cu(II) removal of from water by unconventional waste products including the wooden sawdust of poplar, cherry, spruce and hornbeam. The FT-IR spectra of the studied wooden sawdust confirmed the presence of functional groups that have potential for heavy metal binding. The highest efficiency of Cu(II) removal was observed for poplar wooden sawdust at static (86 %) and dynamic (88 %) adsorption experiments. Data obtained by neutron activation analysis revealed that ion exchange is also a mechanism of metal removal by the selected wooden sawdust.

Acid Mine Drainage (AMD) is the most common pollution related to mining. It consists of an aqueous solution containing high metals and sulphate concentration, which impact surface and groundwater and lead to serious environmental problems. Low pH and high concentrations of heavy metals and sulphates are limiting for many various treatment technologies in these acidic waters. Ion - exchange is a very powerful technology where one or more undesirable contaminants are removed from water by exchange with another non-objectionable or less objectionable substance. Many of materials for the ion - exchange treatment is available in a variety forms and have widely differing chemical and physical properties. The paper deals with study of ion - exchange process under static and dynamic conditions for sulphate removal from acidic waters using ion - exchange resin with the aim to apply the results for treatment of acid mine drainage. Two types of experiments were performed under static and dynamic conditions. The efficiency of AMBERLITE MB20 resin for SO4 2- removal from model solution H2SO4 under static conditions decreases from 86.6 % for concentration 100 mg/L to efficiency 66.9 % for concertation 1000 mg/L. The efficiency for sulphate removal from AMD was only 41%. The study also presents three experiments under dynamic conditions, one with new ion - exchange resin a two experiments with its regenerated form. It was find that ion-exchange capacity decreases numbers of regeneration steps.

Some kinds of natural organic materials have a potential for removal of heavy metal ions from wastewater. It is well known that cellulosic waste materials or by-products can be used as cheap adsorbents in chemical treatment process. In this paper, poplar wood sawdust were used for removal of Cu(II), Zn(II) and Fe(II) ions from model solutions with using the static and dynamic adsorption experiments. Infrared spectrometry of poplar wood sawdust confirmed the presence of the functional groups which correspond with hemicelluloses, cellulose and lignin. At static adsorption was achieved approximately of 80 % efficiency for all treated model solutions. Similar efficiency of the adsorption processes was reached after 5 min at dynamic condition. The highest efficiency of Cu(II) removal (98 %) was observed after 30 min of dynamic adsorption. Changes of pH values confirmed a mechanism of ion exchange on the beginning of the adsorption process.

Sulphates in wastewaters have an origin as the by-products of a variety of industrial operations. A specific and major producer of such effluents, which contained sulphates and heavy metals, is the mining industry. These contaminants should be removed from wastewater using an adequate process of treatment.

Bioleaching processes were used to solubilize metals (Cu, Ni, Zn and Al) from printed circuit boards (PCBs). In this study, a PCBs-adapted pure culture of Acidithiobacillus ferrooxidans, pure culture of Acidithiobacillus thiooxidans and PCBs-adapted mixed culture of A. ferrooxidans and A. thiooxidans were used for recovery of the metals. The study showed that the mixed bacterial culture has the greatest potential to dissolve metals. The maximum metal bioleaching efficiencies were found to be 100, 92, 89 and 20% of Cu, Ni, Zn and Al, respectively. The mixed culture revealed higher bacterial stability. The main factor responsible for high metal recovery was the ability of the mixed culture to maintain the low pH during the whole process. The pure culture of A. thiooxidans had no significant effect on metal bioleaching from PCBs.

Geochemical modeling plays an increasingly vital role in a number of areas of geoscience, ranging from groundwater and surface water hydrology to environmental preservation and remediation. Geochemical modeling is also used to model the interaction processes at the water - sediment interface in acid mine drainage (AMD). AMD contains high concentrations of sulfate and dissolved metals and it is a serious environmental problem in eastern Slovakia. The paper is focused on comparing the results of laboratory precipitation of metal ions from AMD (the Smolnik creek, Slovakia) with the results obtained by geochemical modeling software Visual Minteq 3.0.