Search

Inkjet printing technology uses the low-cost direct deposition manufacturing technique for printing and is applicable in various fields including optics, ceramics, three-dimensional printing in biomedicine, and conductive circuitry. This study reviews the classifications and applications of inkjet printing technologies, with a focus on recent publications. The different design approaches, applications, and research progress of several inkjet printing techniques are reviewed. Among them, the piezoelectric inkjet printing technology is the main focus owing to its reliability and handling of a diverse range of inks. A piezo-driven inkjet printhead is activated by applying a voltage waveform to a piezoelectric membrane. The waveform ensures the formation of the designed droplet and a stable jet. A survey of various driving-voltage waveforms is conducted, which can serve as a reference to the research community that uses piezo-driven inkjet printheads. The challenges of printing quality, stability, and speed and their solutions as published in recent studies are reviewed. Technologies for producing high-viscosity inkjets are explored, and the applications of inkjet printing technology in textile, displays, and wearable devices are discussed.

Mechanical energy harvesting technology converting mechanical energy wasted in our surroundings to electrical energy has been regarded as one of the critical technologies for self-powered sensor network and Internet of Things (IoT). Although triboelectric energy harvesters based on contact electrification have attracted considerable attention due to their various advantages compared to other technologies, a further improvement of the output performance is still required for practical applications in next-generation IoT devices. In recent years, numerous studies have been carried out to enhance the output power of triboelectric energy harvesters. The previous research approaches for enhancing the triboelectric charges can be classified into three categories: i) materials type, ii) device structure, and iii) surface modification. In this review article, we focus on various mechanisms and methods through the surface modification beyond the limitations of structural parameters and materials, such as surficial texturing/patterning, functionalization, dielectric engineering, surface charge doping and 2D material processing. This perspective study is a cornerstone for establishing next-generation energy applications consisting of triboelectric energy harvesters from portable devices to power industries.

To identify the dietary composition and characteristics of both Adélie (Pygoscelis adeliae) and Emperor (Aptenodytes forsteri) penguins at four breeding sites, we performed stable carbon (δ13C) and nitrogen (δ15N) isotope analysis of down samples taken from penguin chicks. Adélie Penguin chicks at Cape Hallett mostly fed on Antarctic krill (Euphausia superba; 65.5 ± 3.5%), a reflection of the prevalence of that species near Cape Hallett, and no significant differences were noted between 2017 and 2018. However, Adélie Penguin chicks at Inexpressible Island, located near Terra Nova Bay, fed on both Antarctic silverfish (Pleuragramma antarctica; 42.5%) and ice krill (Euphausia crystallorophias; 47%), reflecting the high biomass observed in Terra Nova Bay. Meanwhile, no significant difference was noted between the two breeding sites of the Emperor Penguin. Emperor Penguin chicks predominantly fed on Antarctic silverfish (74.5 ± 2.1%) at both breeding sites (Cape Washington and Coulman Island), suggesting that diet preference represents the main factor influencing Emperor Penguin foraging. In contrast, the diet of the Adélie Penguin reflects presumed regional differences in prey prevalence, as inferred from available survey data.

The direct impact of hospital accreditation on patients’ clinical outcomes is unclear. The purpose of this study was to evaluate whether mortality within 30 days of hospitalization for acute myocardial infarction (AMI), ischemic stroke (IS), and hemorrhagic stroke (HS) differed before and after hospital accreditation. This study targeted patients who had been hospitalized for the three diseases at the general hospitals newly accredited by the government in 2014. Thirty-day mortality rates of three years before and after accreditation were compared. Mortality within 30 days of hospitalization for the three diseases was lower after accreditation than before (7.34% vs. 6.15% for AMI; 4.64% vs. 3.80% for IS; and 18.52% vs. 15.81% for HS). In addition, hospitals that meet the criteria of the patient care process domain have a statistically lower mortality rate than hospitals that do not. In the newly accredited Korean general hospital, it was confirmed that in-hospital mortality rates of major cardiovascular diseases were lower than before the accreditation.

The behavior of a slab-column joint subjected to blast loads was studied by numerical analysis using a general-purpose finite element analysis program, LS-DYNA. Under the explosive load, the joint region known as the stress disturbed zone was defined as a region with a scaled distance of 0.1 m/kg1/3 or less through comparison with ConWep’s empirical formula. Displacement and support rotation according to Trinitrotoluene (TNT) weight and scaled distance were investigated by dividing in and out of the joint region. In addition, fracture volume was newly proposed as an evaluation factor for blast-resistant performance, and it was confirmed that the degree of damage to a member due to blast loads was well represented by the fracture volume. Finally, a prediction equation for the blast-resistant performance of the slab-column joint was proposed, and the reliability and accuracy of the equation were verified through additional numerical analysis.

The accurate measurement of effective absorption capacity is crucial for highly absorptive materials when they are used within cement-based materials. In this study, a method for examining effective absorption capacity using isothermal calorimetry is reviewed and investigated in detail to accommodate different circumstances. Specifically, the effect of different pore structures and water-to-cement ratios in determining effective absorption capacity is experimentally examined using activated carbon fibre and powdered activated carbon. The results suggest that the method may be suitable for porous materials with micropores but not suitable for those with mesopores. Also, the results indicate that the effective absorption capacity value can change with the water-to-cement ratio used. These findings can be used to find the effective absorption capacity of highly absorptive materials more accurately using the isothermal calorimetry method.

After a piezoelectric inkjet printhead jets the first droplet, the actuating membrane still vibrates, creating residual vibrations in the ink channel, which can degrade the inkjet printhead performance. For suppressing these vibrations, an optimized actuating voltage waveform with two pulses must be obtained, of which the first pulse is used for jetting and the second pulse is used to suppress the residual vibrations. In this study, the pressure history within the ink channel of a recirculating piezoelectric inkjet printhead was first acquired using lumped element modeling. Then, for suppressing residual vibrations, a bipolar voltage waveform was optimized via analysis of the tuning time (tt ), dwell time (td2), rising time (tr2), falling time (tf2), and voltage amplitude of the second pulse. Two voltage waveforms, Waveform 01 and Waveform 02, were optimized thereafter. In Waveform 01, tt=2 μs, td2=2 μs, and tr2 and tf2=1 μs were finalized as the optimal parameters; in the case of another waveform, the optimal parameters of td2, tr2, and tf2 were found to be 4, 1, and 1 μs, respectively. The optimal voltage amplitude of the second pulse was found to be 1/3 the amplitude of the first pulse. On the basis of our analysis, the tuning time in Waveform 01 is the most sensitive parameter, and the performance yielded is even poorer than that yielded by standard waveform, if not optimized. Therefore, the other waveform is recommended for the suppression of residual vibrations.