Search

We demonstrated an optimization of a picosecond fiber amplifier based on Yb-doped tapered fiber in a spectral range of 1030 nm. Nonlinear effects limiting peak power scaling (stimulated Raman scattering and four-wave mixing) were studied and factors affecting their threshold were established, such as gain, diameter profile along the length of taper, output mode field diameter, and numerical aperture of a pump. By determining the optimal amplification regime and manufacturing advanced tapered fibers, we amplified 13 ps pulses to a record-high peak power of 1 MW at a wavelength of 1029 nm directly at the output of the fiber at an average power of 13.8 W. Four-wave mixing was the limiting factor, and the total fraction of deleterious components in the output spectrum was ~2%. The quality of the output beam was close to being diffraction limited (M2 < 1.2).

The possibility to scale-up output pulse energy in diffraction-limited Er-doped fiber amplifier has been studied. It is shown that the utilization of tapered fiber design allows one to increase the pulse energy up to 2 mJ, while keeping the diffraction-limited beam quality (M2~1.4). Factors limiting the further increase in pulse energy are revealed.

A tapered Er-doped fiber amplifier for high peak power pulses amplification has been developed and tested. The core diameter changed from 15.8 µm (mode field diameter (MFD) 14.5 µm) to 93 µm (MFD 40 µm) along 3.7 m maintaining single-mode performance at 1555 nm (according to the S2-method, the part of the power of high-order modes does not exceed 1.5%). The amplification of 0.9 ns pulses with spectral width below 0.04 nm up to a peak power above 200 kW (limited by self-phase modulation) with a slope pump-to-signal conversion efficiency of 15.6% was demonstrated.