Search

When partial discharge occurs within transformers， the pulse current signal propagates along the winding. Detecting this pulse current signal at both ends of the winding enables the identification of partial discharge within the transformer. To this end， a wideband equivalent circuit model for the transformer is established. In high-voltage windings where partial discharges are likely to occur， partial discharge pulses are applied between different wound disks and the ground to simulate the discharge to the ground at different locations of the high-voltage winding. Pulse current signals are then collected at the end screen of the high-voltage casing and at the neutral point to study the propagation rules of the partial discharge pulse current signal at different locations within the transformer windings. Through calculations， it is observed that the energy ratios of pulse current signals in two distinct frequency bands are linearly correlated with the distance ratio of pulse current propagation， and the maximum error observed in this context is 9.80 wound disks. This method facilitates localization of partial discharge within the transformer， and the results of field experiment subsequently validate the effectiveness of this localization technique.

Partial dampness is the initial stage in the bushing damp process,so the effective diagnosis of partial dampness can avoid the further development of the damp. The partial damp diagnosis method of bushing based on the frequency domain spectroscopy (FDS) is proposed in this paper. Firstly,oil-paper insulation samples with different moisture content are prepared,and partial damped samples are formed through combination. Then the FDS characteristics are obtained. The results show that partial distribution of moisture leads to oil-paper insulation interfaces with different moisture content,and the interface relaxation polarization loss peak is introduced in the FDS curves. The greater the degree of partial dampness in the radial direction,the greater the amplitude of the loss peak,and it moves to the high frequency direction. The effectiveness of the diagnosis of partial dampness of bushing based on the characteristics of the interface relaxation polarization loss peak is verified by the simulation model of the transformer bushing. It shows that a new method for early fault warning and diagnosis of the transformer bushing is provided.