Search

This study aimed to determine the most suitable woody species that can be used to reduce the pollution of Sr, Mo, and Sn, which are heavy metals that are harmful to the ecosystem and human and environmental health. Within the study’s scope, samples were taken from the wood parts of 16 woody species growing under similar conditions in Düzce province, which is among the five cities with the most polluted air in Europe. The wood part is the largest organ of higher plants in terms of mass; it traps heavy metals within itself for many years and can remove heavy metals to a great extent. Therefore, plants with a high potential for heavy metal accumulation in the wood part are among the most suitable plants for phytoremediation studies. The study determined Sr, Mo, and Sn concentrations in the wood parts of 16 tree species via inductively coupled plasma optical emission spectroscopy and compared them using statistical methods. Results indicate that Robinia pseudoacacia and Cedrus atlantica species were suitable for reducing pollution by Mo and Sn, while Platanus orientalis and Populus alba species were suitable for reducing Sr pollution.

The present study aims to determine the current distribution areas of Fagus orientalis Lipsky and the changes in suitable distribution areas due to global climate change within the borders of Kastamonu Forest Regional Directorate of Forestry. In the present study, the current suitable distribution areas of Fagus orientalis and the suitable distribution areas in the years 2040, 2070, and 2100 according to socioeconomic pathway 126, socioeconomic pathway 370, and socioeconomic pathway 585 scenarios were determined. The study results indicate that the suitable distribution areas of Fagus orientalis populations in Kastamonu will change depending on the effects of climate change and that the change will be in the form of an increase in general.

Morphological measurements of Anatolian chestnut (Castanea sativa Mill.) leaves were done within the borders of Abana district of Kastamonu province. The study was conducted using mixed (oak, beech, hornbeam, black pine, and yellow pine) medium (41% to 70%) and fully closed (71% to 100%) stands. Some leaf parameters, such as leaf blade width, petiole length, leaf blade length, leaf length, distance between lateral veins, teeth width, teeth length, the angle between the leaf base and the petiole, and the angle between the midrib and lateral veins, were measured. Moreover, stomata of the leaves picked up from precise altitudes were observed under a scanning electron microscope. The differences between fibre elevation, fibre wall thickness, elasticity coefficient, rigidity coefficient, Muhlstep rate, and Runkel ratio were found in the wood samples taken from different altitude zones. It was found that altitude did not affect leaf blade width, fibre length, fibre width, felting ratio, and lumen width. However, it was determined that altitude affected other studied characteristics.

Morphological measurements of Anatolian chestnut (Castanea sativa Mill.) leaves were done within the borders of Abana district of Kastamonu province. The study was conducted using mixed (oak, beech, hornbeam, black pine, and yellow pine) medium (41% to 70%) and fully closed (71% to 100%) stands. Some leaf parameters, such as leaf blade width, petiole length, leaf blade length, leaf length, distance between lateral veins, teeth width, teeth length, the angle between the leaf base and the petiole, and the angle between the midrib and lateral veins, were measured. Moreover, stomata of the leaves picked up from precise altitudes were observed under a scanning electron microscope. The differences between fibre elevation, fibre wall thickness, elasticity coefficient, rigidity coefficient, Muhlstep rate, and Runkel ratio were found in the wood samples taken from different altitude zones. It was found that altitude did not affect leaf blade width, fibre length, fibre width, felting ratio, and lumen width. However, it was determined that altitude affected other studied characteristics.

This study was conducted to determine the flora of Anatolian Chestnut (Castanea sativa Mill.) forests in Bozkurt and Abana, located within the boundaries of Kastamonu. Besides chestnut, nectar and pollen plants, which are suitable for beekeeping, have been identified in the region. As a result of the study, 216 taxa belonging to 63 families were determined. The phytogeographic regions of the taxa were as follows: 86 (39.8%) Euro-Siberian, 17 (7.9%) Mediterranean, and 113 (52.3%) multiregional or phytogeographically unknown. It was concluded that 195 (90%) of the identified taxa were bee plants in the studied region. The most attractive plants for bees were determined as Fabaceae (29 taxa), Asteraceae (23 taxa), Lamiaceae (13 taxa) and Rosaceae (11 taxa).

Seed orchards with high hereditary qualities and the improvement studies used are of great importance. This study was carried out on individuals in a Boyabat grafted black pine seed orchard, Sinop. The morphological and micromorphological measurements of the characteristics were performed on needle samples taken from individuals, and the genetic diversity was determined on a clonal basis. According to the analysis of variance applied to the data obtained from the measurements and the morphological and micromorphological characters of the clones, it was determined that there was a significant difference among the clones at the P

Seed orchards with high hereditary qualities and the improvement studies used are of great importance. This study was carried out on individuals in a Boyabat grafted black pine seed orchard, Sinop. The morphological and micromorphological measurements of the characteristics were performed on needle samples taken from individuals, and the genetic diversity was determined on a clonal basis. According to the analysis of variance applied to the data obtained from the measurements and the morphological and micromorphological characters of the clones, it was determined that there was a significant difference among the clones at the P

In this study, it was aimed to identify the change in some micromorphological characters in Prunus laurocerasus L. leaves obtained from 6 different provinces located in the areas where different climate types are dominant, depending on their habitat. In this regard, the leaf samples were collected from Prunus laurocerasus L. individuals in the provinces of Rize, Samsun located in the areas including the European-Siberian, Irano-Turanian and Mediterranean phytogeographical regions. The leaf epidermis images were obtained with the help of SEM on the collected leaf samples, and the required measurement procedures were performed on these images with the help of “Image J” measurement program. By measurements performed on the leaf epidermis surface, Stoma Length (µm), Stoma Width (µm), Pore length (µm), Pore width (µm) and Stoma Density (in an area of 1 mm2) measured such as micromorphological characters. The data obtained were subjected to the Variance analysis and Duncan’s test, and the change in these characters depending on their habitat was statistically evaluated. At the end of the study, it was determined that there were statistically significant differences at the confidence level of minimum 95% among the conditions of the habitat in terms of all characters except for the stomatal width.