Search

Abstract The two‐phase reaction of Na3V2(PO4)3 – Na1V2(PO4)3 in Na3V2(PO4)3 (NVP) is hindered by low electronic and ionic conductivity. To address this problem, a surface‐N‐doped NVP encapsulating by N‐doped carbon nanocage (N‐NVP/N‐CN) is rationally constructed, wherein the nitrogen is doped in both the surface crystal structure of NVP and carbon layer. The surface crystal modification decreases the energy barrier of Na+ diffusion from bulk to electrolyte, enhances intrinsic electronic conductivity, and releases lattice stress. Meanwhile, the porous architecture provides more active sites for redox reactions and shortens the diffusion path of ion. Furthermore, the new interphase of Na2V2(PO4)3 is detected by in situ XRD and clarified by density functional theory (DFT) calculation with a lower energy barrier during the fast reversible electrochemical three‐phase reaction of Na3V2(PO4)3 – Na2V2(PO4)3 – Na1V2(PO4)3. Therefore, as cathode of sodium‐ion battery, the N‐NVP/N‐CN exhibited specific capacities of 119.7 and 75.3 mAh g−1 at 1 C and even 200 C. Amazingly, high capacities of 89.0, 86.2, and 84.6 mAh g−1 are achieved after overlong 10000 cycles at 20, 40, and 50 C, respectively. This approach provides a new idea for surface crystal modification to cast intermediate Na2V2(PO4)3 phase for achieving excellent cycling stability and rate capability.

Tin (Sn) can be used as an effective TiAl powder sintering aid, but it is unclear whether Sn will deteriorate its properties as a micro-alloyed element in TiAl intermetallic. This work focuses on the influence of Sn on the mechanical properties and oxidation resistance of TiAl alloys. The effect of Sn on the mechanical properties of TiAl alloys is investigated by experiments and first-principles calculations. Sn atoms preferentially occupy the Al sites in γ-TiAl alloys and increase the lattice volume, which is consistent with the XRD pattern. The elastic constants of TiAl alloys with different Sn contents are also systematically presented. It is found that 1.85 at.% Sn addition improves the ductility of TiAl, but a higher Sn content reduces the ductility. This result is also verified by room temperature compression test. The density of states is also used to prove the ductility improvement of TiAl alloys with a certain amount of Sn. Last, the diffusion barrier of O and Al/Ti–O bond strength were calculated to evaluate the oxidation resistance of TiAl–Sn alloys. The addition of Sn markedly increases the O diffusion barrier and Al–O bond force constant, indicating that Sn can improve the oxidation resistance of TiAl alloy.

Microfluidic phenotyping methods have been of vital importance for cellular characterization, especially for evaluating single cells. In order to study the deformability of a single cell, we devised and tested a tunable microfluidic chip-based method. A pneumatic polymer polydimethylsiloxane (PDMS) membrane was designed and fabricated abutting a single-cell trapping structure, so the cell could be squeezed controllably in a lateral direction. Cell contour changes under increasing pressure were recorded, enabling the deformation degree of different types of single cell to be analyzed and compared using computer vision. This provides a new perspective for studying mechanical properties of cells at the single cell level.

TiAl alloys are difficult to obtain high density through traditional pressing and sintering process. Sn is a promising liquid-phase sintering addition for TiAl alloys; however, the further studies have elaborated that the liquid phase sintering of Sn is limited due to poor wettability between TiAl and melt Sn. Based on it, this study adopts Sn–Al powder addition instead of pure Sn powder. The results describe that a small amount of active Al enhanced the wettability of the Sn droplets to the TiAl matrix, thereby further promoting the liquid phase sintering effect of the addition of Sn. The sample sintered at 1320–1350 °C has a density excess of 95%, near γ or duplex microstructure with small proportion of lamellar colonies. Through subsequent non-encapsulation HIP, the fine-grained structure is maintained at the same time to reach full density, which enables the as-sintered samples to obtain moderate tensile properties at room temperatures (UST = 520 ± 5 MPa, YS = 401 ± 7 MPa, EL = 1.33 ± 0.1).

The blood–brain barrier (BBB) is a structural and functional barrier necessary for brain homeostasis, and it plays an important role in the realization of neural function and in protecting the brain from damage by circulating toxins and pathogens. However, the extremely dense BBB also severely limits the transport of molecules across it, which is a great hindrance to the diagnosis and treatment of central nervous system (CNS) diseases. This paper reports a new method for controllable opening of the BBB, based on the gigahertz acoustic streaming (AS) generated by a bulk acoustic wave resonant device. By adjusting the input power and working distance of the device, AS with tunable flow rate can be generated to disrupt tight junction proteins (TJs) between endothelial cells. The results obtained with this method show that the gigahertz AS promotes the penetration of dextran molecules with different molecular weights across the BBB. This work provides a new platform for studying the mechanical regulation of BBB by fluid shear forces and a new method for improving the efficiency of drug delivery.

A better understanding of the phenotypic heterogeneity of protoplasts requires a comprehensive analysis of the morphological and metabolic characteristics of many individual cells. In this study, we developed a microfluidic flow cytometry with fluorescence sensor for functional characterization and phenotyping of protoplasts to allow an unbiased assessment of the influence of environmental factors at the single cell level. First, based on the measurement of intracellular homeostasis of reactive oxygen species (ROS) with a DCFH-DA dye, the effects of various external stress factors such as H2O2, temperature, ultraviolet (UV) light, and cadmium ions on intracellular ROS accumulation in Arabidopsis mesophyll protoplasts were quantitatively investigated. Second, a faster and stronger oxidative burst was observed in Petunia protoplasts isolated from white petals than in those isolated from purple petals, demonstrating the photoprotective role of anthocyanins. Third, using mutants with different endogenous auxin, we demonstrated the beneficial effect of auxin during the process of primary cell wall regeneration. Moreover, UV-B irradiation has a similar accelerating effect by increasing the intracellular auxin level, as shown by double fluorescence channels. In summary, our work has revealed previously underappreciated phenotypic variability within a protoplast population and demonstrated the advantages of a microfluidic flow cytometry for assessing the in vivo dynamics of plant metabolic and physiological indices at the single-cell level.

The Songliao Basin contains some of the largest volumes of oil shales in China; however, these energy sources are located in areas covered by arable land, meaning that the best way of exploiting them is likely to be environmentally friendly in situ conversion processing (ICP). Whether the oil shales of the Songliao Basin in the Qingshankou Formation are suitable for ICP remain controversial. In this paper, through sequence stratigraphic correlations, three main thick oil shale layers (N1, N2, and N3) of the Sequence1 (Sq1) unit in the first member of Qingshankou Formation (K2qn1) are confirmed as consistently present throughout the Southeastern Uplift region of the basin. The spectral trend attributes reflect that the lake reached a maximum flood surface of the K2qn1 in N2 oil shale layer, and the total organic carbon (TOC) and Fischer assay (FA) oil yield are significantly increasing. The N2 and N3 oil shale layers were deposited in a high lake level environment associated with ingressions of ocean water. The oil shale in these layers with the characteristics of high TOC (maximum of 23.9 wt %; average of 7.2 wt %), abundance of aquatic organic matter (OM) (maximum hydrogen index (HI) of 1080.2 mg/g; average of 889.9 mg/g) and carbonate contents (maximum of 29.5%; average of 15.4%). The N2 and N3 oil shale layers have higher brittleness index (BI) values (generally 40–50%), larger cumulative thicknesses (maximum of 13.3 m; average of 12.0 m), and much higher source potential index (SPI) values (0.92 and 0.88 tHC/m2, respectively) than the N1 oil shale layer within Sq1 transgressive system tracts (TST), indicating that the N2 and N3 layers are prospective targets for ICP. In addition, oil shales buried to depths of

A novel cocrystal of the potent H2 receptor antagonist famotidine (FMT) was synthesized with malonic acid (MAL) to enhance its solubility. The cocrystal structure was characterized by X-ray single crystal diffraction, and the asymmetry unit contains one FMT and one MAL connected via intermolecular hydrogen bonds. The crystal structure is monoclinic with a P21/n space group and unit cell parameters a = 7.0748 (3) Å, b = 26.6502 (9) Å, c = 9.9823 (4) Å, α = 90, β = 104.2228 (12), γ = 90, V = 1824.42 (12) Å3, and Z = 4. The cocrystal had unique thermal, spectroscopic, and powder X-ray diffraction (PXRD) properties that differed from FMT. The solubility of the famotidine-malonic acid cocrystal (FMT-MAL) was 4.2-fold higher than FMT; the FAM-MAL had no change in FMT stability at high temperature, high humidity, or with illumination.