Search

Abstract Steam-assisted gravity drainage (SAGD) is an efficient thermal recovery technique for oil sands and extra heavy oil exploitation. The development of steam chamber goes through multi-stage physical processes for SAGD production in a heavy oil reservoir with an interlayer. In this study, considering the situation that an interlayer is located directly above a pair of horizontal wells, we analyzed the whole process of steam chamber development. We divided the whole process into stages I–V, which are the first rising stage, the first lateral expansion stage, the second rising stage, the second lateral expansion stage and the confinement stage, respectively. Particularly, we further divided stage II into 2 periods and stage IV into 3 periods. These stages and periods can help us understand the development process of steam chamber dominated by an interlayer more profoundly. Based on the divided stages and periods, we established different models of SAGD production by assuming different geometric shapes of steam chamber in different stages and periods. Oval shape was assumed in stages I and III, and inverse triangle shape was hypothesized in stages II, IV and V. The formulas of the front distance of steam chamber and the oil production rate of SAGD were deduced from the established models for different development stages. At the end, we performed two example applications to SAGD production in heavy oil reservoirs with an interlayer. The real oil production rates were matched very well with the theoretical oil production rates calculated by the deduced formulas, which implies the multi-stage development model of steam chamber is of reliability and utility.

Thermosensitivity experiments and simulation calculations were conducted on typical oil sand core samples from Kinosis, Canada to predict the steam chamber development with time-lapse seismic data during the steam-assisted gravity drainage (SAGD). Using an ultrasonic base made of polyether ether ketone resin instead of titanium alloy can improve the signal energy and signal-to-noise ratio and get clear first arrival; with the rise of temperature, heavy oil changes from glass state (at –34.4 °C), to quasi-solid state, and to liquid state (at 49.0 °C) gradually; the quasi-solid heavy oil has significant frequency dispersion. For the sand sample with high oil saturation, its elastic property depends mainly on the nature of the heavy oil, while for the sand sample with low oil saturation, the elastic property depends on the stiffness of the rock matrix. The elastic property of the oil sand is sensitive to temperature noticeably, when the temperature increases from 10 °C to 175 °C, the oil sand samples decrease in compressional and shear wave velocities significantly. Based on the experimental data, the quantitative relationship between the compressional wave impedance of the oil sand and temperature was worked out, and the temperature variation of the steam chamber in the study area was predicted by time-lapse seismic inversion.

As the SAGD steam chamber and production performance in heavy oil reservoirs under fluvial sedimentation environment are heavily impacted by reservoir heterogeneity, an innovative strategy was proposed in this study coupling rock dilation and multi-lateral wells in SAGD projects to break the mud barriers and achieve uniform steam chamber growth. True tri-axial experiments and numerical simulation were designed to validate the feasibility of this strategy, based on which the branches of the SAGD well pairs were designed and the operational parameters were optimized for different geologic heterogeneity conditions. The tri-axial experiment results indicate that the rock formations in the heavy oil reservoirs of the F oilfield exhibit significant shear dilation effects under low confinement pressure conditions, with a volumetric dilation capacity of up to 7%. The branches should be deployed in an interleaved manner, with a horizontal displacement of 20 m and a vertical displacement of 6 m. The optimal results are achieved when the branches intersect the interbeds, allowing for enhanced steam chamber conformance and enlarged volume. Dilation zones of 3–8 m can be created above the steam-injection horizontal wells and around the branches in the reservoir during the dilation of SAGD steam chambers. The maximum volume of dilation fluid used for hydraulic dilation is suggested to be less than 2000 m3. This strategy has been validated as being successful in the pilot SAGD well pair in the F oilfield, China, with the SAGD preheating time reduced by 50% and an incremental oil rate of 4.5 tones/day, indicating encouraging potentials in similar heavy oil reservoirs.

Geothermal energy is a clean energy source to fulfill the increasing global energy demands. For the first time, several energy extraction strategies are proposed and compared through numerical simulations for effective energy recovery from low-permeability geothermal reservoirs. We simulate geothermal energy extraction using either Cyclic Water Injection (CWI) or Water-Assisted Gravity Drainage (WAGD) processes with or without hydraulic fracturing over a 10-year operation. We evaluate the positioning of injector and producer in WAGD process, well spacing, addition of one injector, and the time variation of injection/soaking periods in CWI process. The simulations indicate that the fractured reservoirs generate more energy than those without fracturing; CWI-based processes exhibit higher energy recovery efficiency than WAGD process in terms of Energy-Water-Ratio (EWR). EWR, as a newly proposed parameter in this study, is defined as the energy production specific to per unit volume of water injected, which is useful in evaluating the cost-effectiveness of a geothermal energy extraction process. The gravitational effect proves to be the dominant factor that determines energy generation compared to phase change in WAGD process. In addition, formation and impacts of steam chambers in CWI and WAGD-based processes are discussed. Furthermore, statistical analyses are performed to evaluate the effects of reservoir temperature, pressure, permeability, and their mutual interactions on cumulative energy production. Eventually, two correlation models for predicting cumulative energy production based on these formation properties are proposed. This study provides a new perspective on implementing different innovative exploration strategies and optimization processes for energy extraction from low-permeability geothermal reservoirs.

Steam injection can be success in increasing oil recovery by determining the steam chamber growth. It will impact on the steam distribution and steam performance in covering hot areas in the reservoir. An injection plan and a proper cyclic steam stimulation (CSS) schedule are critical in predicting how steam chamber can grow and cover the heat area. A reservoir simulation model will be used to understand how CSS really impact in steam chamber generation and affect the oil recovery. This paper generates numerous scenarios to see how steam working in heavy oil system particularly in unconsolidated sand reservoir. Combine the CSS method and steam injection continue investigate in this research. We will validate the scenarios based on the how fast steam chest can grow and get maximum oil recovery. Reservoir simulation resulted how steam chest behavior in unconsolidated sand to improve oil recovery; It concluded that by combining CSS and Steam Injection, we may get a faster steam chest growth and higher oil recovery by 61.5% of heavy oil system.

Worldwide, new techniques to implement Enhanced Oil Recovery in heavy oil reservoirs have been studying, since as most of the global reserves are of this type of hydrocarbon. The Steam Assisted Gravity Drainage (SAGD) is a cutting age EOR method that have been applied in bitumen reservoirs gaining successful results, obtaining recovery factors up to 50%. The technique involves two horizontal wells, the first one located a few feet above the second one depending on the viscosity of the crude oil; by the upper well, the continuous vapor injection is made an for density differences this vapor tents to expand to the top of the formation heating the hydrocarbons which then, by gravity come down in the reservoir to be produce, with the condensed vapor, through the second horizontal well. The production mechanism evidenced in this technique is the gravity drainage because in its implementation, applied to bitumen, only the heated hydrocarbons will flow through the producer well by the effect of the gravity therefore a connectivity between the two wells must be necessary. However, in the majority of heavy oil reservoirs the crude have mobility i.e. the viscosity is not to high (