Search

Introduction. Determination of pesticide residues presence in herbal plants and preparations based on them is an important step in confirming safety at the stage of the quality control of herbal plants. The usage of organophosphate pesticides (OPs) for the purposes of treatment of medicinal plants in the growing process is increasing. Scientific sources provide information on the detection of OPs in herbal plants, including quantities exceeding the allowed percentage limits as it is settled in regulatory documentation. At the same time, the problem of the distribution of particular kinds of OPs in the organs of herbal plants and their persistence remains understudied.Aim. The present research aims to study the distribution in various parts of the herbal plants (marigolds, valerian, and stinging nettle) and the persistence of malathion and diazinon.Materials and methods. Stinging nettle, that grows everywhere, exclusively cultivated marigolds, and valerian were selected as model plants. All of the plants were divided into three equal groups. Young plant shoots were processed twice with "Aliot" products containing 570 g/l of malathion and "Terradox" containing 40 g/kg of diazinon. The first group of plants was processed with pesticides following the manufacturer's instructions. The second group was treated in quantities, that were three times higher than the recommended dosage. The third group (control), was not processed with pesticides. Samples of various parts of growing herbal plants were analyzed at certain time points with the HPLC-MS/MS method according to the developed methodology. In order to study the persistence, we carried out a repeated analysis of dried samples stored without access to sunlight 0.5 years after the first one according to the requirements of the State Pharmacopoeia of the Russian Federation XV.Results and discussion. The authors found malathion and diazinon in all of the analyzed parts of medicinal marigolds, in leaves and roots of nettle dioecious, in deciduous shoots and rhizomes with roots of valerian officinalis. The highest proportion of pesticides was discovered in underground plant organs. When processed according to the instructions, in marigold and nettle roots and in rhizomes with valerian roots 16.7 mg/kg, 4.5 mg/kg, and 1.7 mg/kg of malathion and 19.6 mg/kg, 4.1 mg/kg, and 1.5 mg/kg of diazinon were found, respectively. These quantities exceed the allowed limits. The quantity of pesticides in the flowers of medicinal marigolds does not exceed the permissible values. The research on the persistence of these OPs data demonstrates that malathion and diazinon persist in plant tissues for a long time.Conclusion. As a result of the research quantitative characteristics of the distribution of malathion and diazinon in various parts of medicinal marigolds, medicinal valerian, and dioecious nettle, as well as the rate and the extent of degradation of OPs during six months, were determined.

Abstract A nanostructured copper oxide (nCO) coating which can be electrochemically reduced to copper metal is demonstrated as an anti‐reflection coating, enabling interference lithography of three‐dimensionally structured templates on a surface compatible with subsequent electrodeposition steps. The nCO presents a black needle‐like structure which effectively absorbs the incident radiation during interference lithography. Specular and diffused reflectivity measurements confirm nCO has near‐zero reflectivity from at least UV (350 nm) to near IR (700 nm) wavelengths. A particularly important aspect of the nCO is its ability to be reduced to copper metal, enabling electrodeposition inside porous templates fabricated on the nCO. It is demonstrated electrodeposition of copper within 3D templates defined by interference lithography and proximity field nano‐patterning processes, forming mesostructured metals which enhance two‐phase cooling. The resultant 5 µm thick structures exhibited up to 3 times the critical heat flux and 2 times heat transfer coefficient of bare silicon. The structures are optimized via computational tools including Finite Difference Time Domain (FDTD) and COMSOL Multiphysics. The use of the approach demonstrated here can potentially find application in many areas given the broad importance of mesostructured metals for energy, biomedical, and mechanical applications.

Quercetin is one of the most promising natural polyphenolic radioprotective compounds. This property is based on its radical-scavenging activity and high antioxidant capacity, in the manifestation of which the products of oxidative degradation of quercetin play a significant role. The formation of specific metabolites during the oxidation of quercetin can determine not only its radioprotective properties, but also toxic manifestations. The purpose of this article is to summarize previously obtained data regarding the reaction pathways of oxidative transformation of quercetin. Materials and methods. We used publicly available scientific publications dedicated to the study of quercetin transformation processes. The method of analysis is descriptive. The discussion of the results. A review of scientific works dedicated to oxygen oxidation, radical-initiated oxidation, electrochemical and enzymatic oxidation is presented, possible transformation products of quercetin and the mechanisms of their formation are given. The most characteristic oxidation pathways of quercetin are determined by the chemical structure of the rings, which exhibit specific reactivity. The influence of the solvent composition on the oxidation products during the autoxidation of quercetin was revealed, while the radical and electrochemical models of oxidation differ in the presence of polymer adducts. Once in a living organism, quercetin can bind free radicals, thereby preventing the harmful effects of radiation, that is, it has the properties of a radioprotector. Conclusions. Quercetin can be considered as a potential radioprotector due to its ability to bind free radicals formed in the biological fluids of living organisms exposed to radiation.

The timely detection of violations of the Convention on the Prohibition of the Development, Production, Stockpiling and Use of Chemical Weapons and on Their Destruction (CWC) requires reliable methods for detecting toxic chemicals that can be used for chemical attacks. The purpose of this investigation is to estimate chromatographic and mass-spectral characteristics of some toxic chemicals recently included into Schedule 1 of the Annex on Chemicals of the CWC, in particular N-(N,N-diethylacetamidino)-methylfluorophosphonate (DEAMP), N-(N,N-diethylacetamidino)-O-methylfluorophosphate (DEAOMP) and N-(N,N-diethylacetamidino)-O-ethylfluorophosphate (DEAOEP) and the improvement of the qualification of the Chemical Analytical Control Laboratory experts taking part in the OPCW Proficiency Tests. Materials and methods. The technique of high efficient liquid chromatography coupled with tandem high resolution mass spectrometry (LC-MS/HRMS) was used during the investigation. The results. The results of optimization of conditions of mass-spectrometric detection, selection of optimal pairs of ion reactions and program of gradient elution during separation of chemicals in reversed-phase liquid chromatography were presented. Presented approach was tested in analysis of model aqueous samples; metrological parameters of detection of compounds were estimated. Conclusion. It was shown during investigation that electrospray ionization mass-spectra of DEAMP, DEAOMP and DEAOEP contain intensive peaks of protonated molecular ions, which after further fragmentation produce characteristic product-ions used for identification and high sensitive detection of parent compounds by LC-MS/HRMS. Limits of detection of DEAMP, DEAOMP and DEAOEP were 1.0 ng/mL, 0.5 ng/mL and 0.5 ng/mL, respectively

EsopredictTM is a prognostic assay that risk-stratifies Barrett’s esophagus patients to predict future progression to high-grade dysplasia (HGD) or esophageal adenocarcinoma (EAC). Established based on foundational studies at Johns Hopkins University, a risk algorithm was developed and clinically validated in two independent studies (n = 320). EsopredictTM is currently offered as a clinical test under the Clinical Laboratory Improvement Amendments (CLIA) guidelines. Here we present the analytical validation by repeated testing of FFPE tissues (n = 26 patients), cell lines, and contrived DNA controls to determine assay performance regarding analytical sensitivity (as defined by the limit of detection (LOD)), analytical specificity (as defined by the limit of blank (LOB)), accuracy as determined from the average positive and negative agreement, repeatability, and reproducibility. The LOD for the assay at 1.5% DNA methylation was significantly higher than the LOB, as determined by an unmethylated DNA control (0% methylated DNA). Inter- and intra-assay average positive agreement (APA) were 88% and 94%, respectively, while average negative agreement (ANA) values were 90% and 94%, respectively. Average inter- and intra-assay precision were TM is a highly reproducible, sensitive, and specific risk categorization assay for the prediction of progression to HGD or EAC within 5 years.

Scientific relevance. Deuterated analogues of test substances, when used as internal standards, enable analysts to determine traces of residual pesticides in a medicinal plant raw material by gas or liquid chromatography coupled with mass spectrometry. This prompts the search for an undemanding method for the synthesis of deuterated reference standards, with the ultimate goal of expanding the range of reference standards produced in Russia.Aim. The study aimed to synthesise deuterated reference standards (malathion-D6, chlorophos-D6, dichlorophos-D6, and their precursors) and determine their spectral characteristics using 1Н, 2Н, 13С and 31Р nuclear magnetic resonance (NMR) spectroscopy and high-resolution mass spectrometry.Materials and methods. The study involved methanol-D4, phosphorus pentasulfide, phosphorus trichloride, maleic acid diethyl ether, triethylamine, hydroquinone, and chloral hydrate. The authors recorded 1H, 2H, 13C, and 31P NMR spectra using a QONE AS400 NMR spectrometer operating at a temperature of 298 °K and respective frequencies of 399.83, 61.38, 100.55, and 161.85 MHz. Mass spectra were obtained using an analytical system comprising an Agilent Infinity 1260 liquid chromatograph equipped with an automatic sample injector and coupled with a Thermo Scientific Orbitrap Fusion Lumos high-resolution mass-selective tandem spectrometer operating in electrospray ionisation mode.Results. The authors used existing methods for the synthesis of organophosphate pesticides as a basis and developed synthesis routes to produce the deuterated analogues malathion-D6, chlorophos-D6, and dichlorophos-D6. The synthesised compounds were identified by NMR spectroscopy and high-resolution mass spectrometry.Conclusions. The synthesised compounds are highly pure and suitable for use as internal standards in the determination of organophosphate pesticides in medicinal plant raw materials. The synthesis methods developed by the authors can be used to produce reference standards in Russia.

A method for the determination of a mustard gas biomarker (an S-hydroxyethylthioethyl adduct with albumin) in blood plasma was optimized with the use of HPLC with tandem mass-spectrometric detection. This method is based on the hydrolysis of this adduct by the proteinase K enzyme with the formation of the following stable tripeptide with cysteine, proline, and phenylalanine: S-HETECys-Pro-Phe. The detection limit of mustard gas in human blood plasma was 2 ng/ml. The approach proposed was tested in the analysis of human blood plasma samples by the standard addition technique and also within the framework of the first official biomedical test carried out by the Organization for the Prohibition of Chemical Weapons (OPCW) in 2016, and it exhibited a good accuracy, reproducibility, and specificity of determination.

Abstract Compact visible wavelength achromats are essential for miniaturized and lightweight optics. However, fabrication of such achromats has proved to be exceptionally challenging. Here, using subsurface 3D printing inside mesoporous hosts we densely integrate aligned refractive and diffractive elements, forming thin high performance hybrid achromatic imaging micro-optics. Focusing efficiencies of 51–70% are achieved for 15μm thick, 90μm diameter, 0.3 numerical aperture microlenses. Chromatic focal length errors of less than 3% allow these microlenses to form high-quality images under broadband illumination (400–700 nm). Numerical apertures upwards of 0.47 are also achieved at the cost of some focusing efficiency, demonstrating the flexibility of this approach. Furthermore, larger area images are reconstructed from an array of hybrid achromatic microlenses, laying the groundwork for achromatic light-field imagers and displays. The presented approach precisely combines optical components within 3D space to achieve thin lens systems with high focusing efficiencies, high numerical apertures, and low chromatic focusing errors, providing a pathway towards achromatic micro-optical systems.

By spontaneously emitting midinfrared radiation to outer space through the atmospheric window and reflecting sunlight, daytime radiative coolers achieve notable passive cooling performance. However, existing daytime radiative cooling systems generally lack the ability to adaptively switch between heating and cooling states based on ambient conditions. Herein a passive thermal regulation system that features a temperature‐dependent switchable solar reflectance from 0.05 (low temperature) to 0.8 (high temperature) is presented. This, along with a ≈0.95 midinfrared emittance, it enables automatic switching between radiative cooling and solar heating. Switchablity is enabled using a poly(N‐isopropylacrylamide) (PNIPAM) hydrogel which exhibits high solar scattering above its tunable lower critical solution temperature (LCST) and transparency below its LCST. The lower part of the hydrogel is loaded with graphite to absorb solar energy in the heating state. In testing under sunny and partly cloudy outside conditions, this system maintains a temperature close to the set LCST.

Many nano-optical applications require a suitable nanofabrication technology. Hole-mask colloidal nanolithography has proven to be a low-cost and large-area alternative for the fabrication of complex plasmonic nanostructures as well as metamaterials. In this paper, we describe the fabrication process step by step. We manufacture a variety of different plasmonic structures ranging from simple nano-antennas over complex chiral structures to stacked composite materials for applications such as sensing. Additionally, we give details on the control of the nanostructure lateral density which allows for the multilayer-fabrication of complex nanostructures. In two accompanying movies, the fabrication strategy is explained and details are being demonstrated in the lab. The movies can be found at the website of Beilstein TV.

The intestinal mucosa displays robust virus replication and pronounced CD4+ T-cell loss during acute human immunodeficiency virus type 1 (HIV-1) infection. The ability of HIV-specific CD8+ T-cells to modulate disease course has prompted intensive study, yet the significance of virus-specific CD8+ T-cells in mucosal sites remains unclear.We evaluated five distinct effector functions of HIVgag-specific CD8+ T-cells in rectal mucosa and blood, individually and in combination, in relationship to clinical status and antiretroviral therapy (ART). In subjects not on ART, the percentage of rectal Gag-specific CD8+ T-cells capable of 3, 4 or 5 simultaneous effector functions was significantly related to blood CD4 count and inversely related to plasma viral load (PVL) (p

Biodiesel purity expressed as fatty esters content is one of its most important quality parameters. Although several instrumental methods have been employed, gas chromatography with internal standard calibration has been the most used. Biodiesel is a very complex matrix, therefore finding a suitable internal standard (IS) is not straightforward. EN14103:2003 standard established methyl heptadecanoate (C17:0) as IS. Since this fatty ester is naturally present in some biodiesel feedstock as tallow, that standard was reviewed in 2011, and methyl nonadecanoate (C19:0) became the new IS. In turn, C19:0 produces a peak on the chromatogram that is difficult to resolve from methyl linoeate (C18:2) and metyl linolenate (C18:3) ones. In this paper, a GC-FID method for the determination of the esters content in methyl and ethyl biodiesel from canola and soy oils, using hexadecyl acetate as a new internal standard was validated. EN14103:2003 was used as reference method. Method selectivity, accuracy (t student parameter < 2.18 from both methods), repeatability (0.1 - 0.4%), intermediate precision (0.2 - 1.8%), and robustness (0.1 - 1.6%) were investigated and considered appropriate for the scope.

Abstract Background Viral infections are common complications following allogeneic hematopoietic stem cell transplantation (allo-HSCT). Allo-HSCT recipients with steroid-refractory/dependent graft-versus-host disease (GvHD) are highly immunosuppressed and are more vulnerable to infections with weakly pathogenic or commensal viruses. Here, twenty-five adult allo-HSCT recipients from 2016 to 2019 with acute or chronic steroid-refractory/dependent GvHD were enrolled in a prospective cohort at Geneva University Hospitals. We performed metagenomics next-generation sequencing (mNGS) analysis using a validated pipeline and de novo analysis on pooled routine plasma samples collected throughout the period of intensive steroid treatment or second-line GvHD therapy to identify weakly pathogenic, commensal, and unexpected viruses. Results Median duration of intensive immunosuppression was 5.1 months (IQR 5.5). GvHD-related mortality rate was 36%. mNGS analysis detected viral nucleotide sequences in 24/25 patients. Sequences of ≥ 3 distinct viruses were detected in 16/25 patients; Anelloviridae (24/25) and human pegivirus-1 (9/25) were the most prevalent. In 7 patients with fatal outcomes, viral sequences not assessed by routine investigations were identified with mNGS and confirmed by RT-PCR. These cases included Usutu virus (1), rubella virus (1 vaccine strain and 1 wild-type), novel human astrovirus (HAstV) MLB2 (1), classic HAstV (1), human polyomavirus 6 and 7 (2), cutavirus (1), and bufavirus (1). Conclusions Clinically unrecognized viral infections were identified in 28% of highly immunocompromised allo-HSCT recipients with steroid-refractory/dependent GvHD in consecutive samples. These identified viruses have all been previously described in humans, but have poorly understood clinical significance. Rubella virus identification raises the possibility of re-emergence from past infections or vaccinations, or re-infection. Video abstract

Biodiesel made from oils is rich in polyunsaturated fatty acids methyl esters, and, consequently, presents high tendency to oxidize. Biodiesel made from fats, on the other hand, is mainly comprised by saturated chains. Although it is highly stable, they easily crystalize at low temperatures. Blends from both can exhibit optimized properties. In this work, oxidative stability, expressed by induction period (IP), and cold filter plugging point (CFPP) of blends from palm, palm kernel, babassu, tallow or lard biodiesels with soy one were measured. Biodiesel samples were prepared by two steps transesterification methodology with KOH catalysis followed by H2SO4. IP increases, as the fat biodiesel content in the blend is higher, as expected. Blends comprised by 60% of fat biodiesel by volume had their IP increased from 1.5 (lard) to 2 times (palm kernel), compared to soy one. At this level, IP was found 8 h or higher, except for palm, which 80% was required. CFPP was observed at 8 °C or lower for the blends containing up to 60% of all the fat biodiesel, except for the palm one, which a 20% content must not be surpassed. Palm kernel 80% biodiesel blend reached the Brazilian specification, that is, IP higher than 12 h and CFPP lower than 5 °C.

Abstract The shuttling behavior and slow conversion kinetics of the intermediate lithium polysulfides are the severe obstacles for the application of lithium‐sulfur (Li‐S) batteries over a wide temperature range. Here, an engineered lamellar yolk–shell structure of In2O3@void@carbon for the Li‐S battery cathode is developed for the first time to construct a powerful barrier that effectively inhibits the shuttling of polysulfides. On the basis of the unique nanochannel‐containing morphology, the continuous kinetic transformation of sulfur and polysulfides is confined in a stable framework, which is demonstrated by using X‐ray nanotomography. The constructed Li‐S battery exhibits a high cycling capability over 1000 cycles at 1.0 C with a capacity decay rate as low as 0.038% per cycle, good rate performance, and temperature tolerance at −10, 25, and 50 °C. A nondestructive in situ monitoring method of the interfacial reaction resistance in different cycling stages is proposed, which provides a new analysis perspective for the development of emerging electrochemical energy‐storage systems.

Here the authors report a deposition-regulating strategy to form conductivity and lithiophilicity gradients which serve to guide the preferential lithium growth away from the interface between anode and separator and mitigate the dendrite-induced short circuits.

The development of high performance flexible solid supercapacitors calls for an effective approach to infill gel electrolytes into porous electrodes. Here the authors report a bottom-up method to address this technical challenge, which leads to enhanced areal capacitance and durability.