Search

Abstract Bacteria are difficult to be eliminated because of their multi‐drug resistance, which brings significant threats to public health. Among the antibacterial methods, mechanobactericidal surfaces provide a possible approach to solving this problem. In this study, a generally used mechanical sterilization is developed by fabricating a nanostructured coating. The functional coating is simply fabricated by growing zeolitic imidazolate frameworks (ZIFs, ZIF‐8 mixed with ZIF‐67) nanospikes on the surface of the fabric substrate in situ. The fabricated ZIF nanospikes are stable and effective, with the sterilization efficiency approaching 99.9999%. This technique provides a fast, safe, and low‐cost antibacterial method without drug resistance, which can be potentially used in hospitals, emergency treatments, and superbug protection in the future.

Explosive boiling is a fast-phase transition from an ultra-thin liquid film to vapor under an extremely high heat flux, which typically has been studied using the molecular dynamics simulation (MDS) method. The present MDS study investigated the explosive boiling of a liquid argon nanofilm over different solid copper surfaces with different nanowall patterns, including parallel and cross nanowalls. For each surface, atomic motion trajectories, the number of liquid and vapor argon atoms, heat flux, and, mainly, the onset time of explosive boiling were investigated. The simulation results indicated that explosive boiling occurs earlier on parallel and cross nanowall surfaces than on an ideally smooth surface, regardless of the topology and configuration of the nanowalls. Moreover, the results revealed that by using the cross nanowall surfaces, the onset time of explosive boiling decreased by 0.7–4% compared to the parallel nanowall surfaces. In addition, it was found that the onset time of explosive boiling strongly depends on the potential energy barrier and the movement space between nanowalls for both parallel and cross nanowall surfaces. Furthermore, the simulation findings showed that even though increasing the height of cross nanowalls increases the heat flux and temperature of the fluid argon domain, it does not necessarily result in a shorter onset time for explosive boiling. These findings demonstrate the capability of cross nanowall surfaces for explosive boiling, thereby being utilized in future surface design for thermal management applications.

A new comprehensive theory for the field emission from the nanostructured semiconducting SiC was built with allowance for specially worked out analytical model of the field enhancement coefficient for the case of comparatively “smooth” protrusions, described by the curve of Lorenzian type. For the purpose of this analytical model a verification of the direct numerical computation of the field enhancement coefficient for the mentioned protrusions was carried through solving of the Poisson-Boltzmann equation using the finite elements method. The obtained numerical estimations confirm the perspectives of these cathodes. For the “sharp” protrusions with the height greater than the half-width, the emission current of 1 mA order can be harvested from one square cm for the fields ~3×108 V/m. The advantage of the proposed nanostructured cathodes based on SiC is the simplicity of their fabrication.

Colloidal gold nanoparticles (AuNP) are well-known to present a catalytic activity. However, they are characterized by certain limitations, as a rather poor stability and lack of both handling and reusability. Their immobilization on surfaces could help to overcome these drawbacks. This work evaluated the impact of the immobilization of AuNP towards their catalytic activity on reduction and oxidation reactions. Colloidal AuNP stabilized with citrate ions were synthesized, characterized, and immobilized by the dip-coating method, the obtained immobilized AuNP (iAuNP) were characterized. The catalytic activity of AuNP and iAuNP was evaluated and compared to each other through the p-nitrophenol reduction reaction. The kinetic of the catalytic activity of iAuNP was slower than colloidal AuNP. The catalytic activity appeared to be impacted by the less available surface of iAuNP. The reduction efficiency of iAuNP was also evaluated with the DPPH•/DPPH2 reduction reaction. The capacity of iAuNP to catalyze the reduction of DPPH• in DPPH2 was shown even after 130 days and 20 reuses of the nanostructured surface on the contrary to non-reusable colloidal AuNP. The oxidation efficiency of iAuNP was measured by the ability to catalyze the auto-oxidation of curcumin (HPLC-UV/vis). For all these experiments, the addition of 4-mercapto-phenol on the surface of iAuNP passivated the surface, decreasing the catalytic activity of the materials. In conclusion, iAuNP are redox catalysts with both anti- and pro-oxidant effects and high reusability over a very long period.

Gold nanoparticles (AuNPs) can be described as nanozymes, species that are able to mimic the catalytic activities of several enzymes, such as oxidase/peroxidase, reductase, or catalase. Most studies in the literature focus on the colloidal suspension of AuNPs, and it is obvious that their immobilization could open the doors to new applications thanks to their increased stability in this state. This work aimed to investigate the behavior of surfaces covered by immobilized AuNPs (iAuNPs). Citrate-stabilized AuNPs (AuNPs-cit) were synthesized and immobilized on glass slides using a simple dip coating method. The resulting iAuNPs were characterized (surface plasmon resonance, microscopy, quantification of immobilized AuNPs), and their multi-enzymatic-like activities (oxidase-, peroxidase-, and catalase-like activity) were evaluated. The comparison of their activities versus AuNPs-cit highlighted their added value, especially the preservation of their activity in some reaction media, and their ease of reuse. The huge potential of iAuNPs for heterogeneous catalysis was then applied to the degradation of two model molecules of hospital pollutants: metronidazole and methylene blue.

Introduction. In modern dentistry the oral rehabilitation of patients with the help of dental implants has a very high success rate. However, the problem is the situation of patients with serious chronic diseases in which the insertion of dental implants is problematic or dental procedures can complicate or aggravate the patients’ disease.

Thin Pd–40%Cu films were obtained via the classical melting and rolling method, magnetron sputtering, and modified with nanostructured functional coatings to intensify the process of hydrogen transportation. The films were modified by electrodeposition, according to the classical method of obtaining palladium black and “Pd–Au nanoflowers” with spherical and pentagonal particles, respectively. The experiment results demonstrated the highest catalytic activity (89.47 mA cm−2), good resistance to CO poisoning and long-term stability of Pd–40%Cu films with a pentagonal structured coating. The investigation of the developed membranes in the hydrogen transport processes in the temperature range of 25–300 °C also demonstrated high and stable fluxes of up to 475.28 mmol s−1 m−2 (deposited membranes) and 59.41 mmol s−1 m−2 (dense metal membranes), which were up to 1.5 higher, compared with membrane materials with classic niello. For all-metal modified membranes, the increase in flux was up to sevenfold, compared with a smooth membrane made of pure palladium, and for deposited films, this difference was manyfold. The membrane materials’ selectivity was also high, up to 4419. The developed strategy for modifying membrane materials with functional coatings of a fundamentally new complex geometry can shed new light on the development and fabrication of durable and highly selective palladium-based membranes for gas steam reformers.

The process of electrodeposition of nickel coatings from electrolytes based on a deep eutectic solvent (DES) mixture of choline chloride and lactic acid with a molar ratio of 1:3 was studied. The physicochemical properties and characteristics of DES, namely, con­ductivity, FT-IR and NMR analysis were determined. FT-IR results confirmed that H-bonds occurring between two components in DES were the main force leading to the eutectic formation. Electrochemical techniques were used to characterize the deposition process and scanning electron microscopy was used to study the deposit morphology. Based on polarization measurements, it has been found that at NiCl2·6H2O content of 1.14 M and a temperature of 75 °C, the limiting current density of nickel electrodeposition was near 2 A dm-2. The polarization of the cathodic nickel deposition varied within -0.63 to 1.1 V at current density of 0.25 A dm-2 It has been shown that an increase of water content in the electrolyte does not significantly affect the current efficiency of the nickel electrodeposition process, which was in a range 85-93 %. However, the increase in water content contributes to the increase of heterogeneity and crystal grains size distribution of galvanic deposits. The established values of the Wagner number indicate the predominance of the primary current density distribution in the process of electrodeposition of nickel coatings. Galvanic coatings possess a highly developed nanostructured surface, exhibit increased capillary properties, and can be used as electrode materials for the process of electrolysis of water.

This study utilizes a hot water treatment (HWT) method for introducing antibacterial properties to aluminum (Al) surfaces, which has relevance in several industries ranging from food packaging and ventilation systems to biomedical materials. The HWT process can produce a nanostructured oxide layer on a wide range of metallic materials by simply immersing the metal in water at temperatures ranging from 75 °C to 95 °C. In this work, Al foil was treated in deionized (DI) water for 5 min at various temperatures, including 75 °C, 85 °C, and 95 °C. Concentrations of Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus epidermidis (S. epidermidis) were placed on Al foil for different times, ranging from 30 seconds to 60 min The survival time was measured, and the analysis of the results indicates a direct correlation between when the bacteria was exposed to HWT Al foil and the number of bacteria killed. As the temperature of the HWT increased, there was an increase in antibacterial activity. This finding is consistent with our expectations; at higher HWT temperatures, more prominent nanostructures are produced, causing increased inactivation of bacteria. Our results show the nanostructured HWT Al foil was superior at inactivating Gram-negative ( E. coli ) and Gram-positive ( S. epidermidis ) bacteria compared to the untreated control Al foil. HWT Al foil treated at 75 °C, 85 °C, and 95 °C was 58%, 64%, and 73% more effective in killing the Gram-negative bacteria, respectively, after only 30 seconds of contact time compared to untreated control Al foil, while the antibacterial efficacy was enhanced 88%, 92%, and 94% for the Gram-positive bacteria, respectively. The HWT nanostructures synthesized at 95 °C, after 60 min of contact time, were able to inactivate 97% of the gram-negative bacteria and 100% of the gram-positive bacteria, demonstrating the efficacy of its antibacterial properties. This research presents a novel, inexpensive, and environmentally friendly method of producing nanostructures that inhibit bacterial activity.

A controlled strategy for the electrochemical synthesis of mono- and bimetallic nanoparticles with a unique and complex morphology has been developed. The investigation of the effect of changing the surfactant concentration and current density regulating the medium pH has revealed the fundamental patterns of nanoparticle growth. The developed method has allowed to synthesis of nanoparticles with a controlled pentabranched structure for the monometallic palladium as well as for favorable combinations of metals—Pd-Ag and Pd-Pt. The obtained nanoparticles were investigated in alkaline methanol oxidation. The results demonstrated quite high catalytic activity up to 83.51 mA cm−2 and long-term stability, which are caused by the increase in electrochemically active surface area by increasing the active center’s number. This was made possible due to the creation of unusual nanoparticle morphology, namely the presence of high-energy high-index facets. The developed nanoparticles were also studied as a modifying coating for hydrogen-permeable membranes in the processes of hydrogen transport. The membranes coated with the nanoparticles demonstrated sufficiently high hydrogen flux up to 11.33 mmol s−1 m−2 and high H2/N2 selectivity up to 2254. Such results can be explained by the obvious acceleration of surface processes through the application of the developed nanoparticles. The novel synthesis strategy can potentially be extended to other metal nanoparticle systems. Thus it can be an effective way to solve relevant problems of design of controlled synthetic methods allowing the nanoparticle morphology tuning according to the required functional properties.

The possibility of the developing a biochemical oxygen demand (BOD) biosensor based on electroactive biofilms of activated sludge grown on the surface of a graphite-paste electrode modified with carbon nanotubes was studied. A complex of microscopic methods controlled biofilm formation: optical microscopy with phase contrast, scanning electron microscopy, and laser confocal microscopy. The features of charge transfer in the obtained electroactive biofilms were studied using the methods of cyclic voltammetry and electrochemical impedance spectroscopy. The rate constant of the interaction of microorganisms with the extracellular electron carrier (0.79 ± 0.03 dm3(g s)−1) and the heterogeneous rate constant of electron transfer (0.34 ± 0.02 cm s−1) were determined using the cyclic voltammetry method. These results revealed that the modification of the carbon nanotubes’ (CNT) electrode surface makes it possible to create electroactive biofilms. An analysis of the metrological and analytical characteristics of the created biosensors showed that the lower limit of the biosensor based on an electroactive biofilm of activated sludge is 0.41 mgO2/dm3, which makes it possible to analyze almost any water sample. Analysis of 12 surface water samples showed a high correlation (R2 = 0.99) with the results of the standard method for determining biochemical oxygen demand.

Angiotensin I-converting enzyme (ACE) is a peptidase widely presented in human tissues and biological fluids. ACE is a glycoprotein containing 17 potential N-glycosylation sites which can be glycosylated in different ways due to post-translational modification of the protein in different cells. For the first time, surface-enhanced Raman scattering (SERS) spectra of human ACE from lungs, mainly produced by endothelial cells, ACE from heart, produced by endothelial heart cells and miofibroblasts, and ACE from seminal fluid, produced by epithelial cells, have been compared with full assignment. The ability to separate ACEs’ SERS spectra was demonstrated using the linear discriminant analysis (LDA) method with high accuracy. The intervals in the spectra with maximum contributions of the spectral features were determined and their contribution to the spectrum of each separate ACE was evaluated. Near 25 spectral features forming three intervals were enough for successful separation of the spectra of different ACEs. However, more spectral information could be obtained from analysis of 50 spectral features. Band assignment showed that several features did not correlate with band assignments to amino acids or peptides, which indicated the carbohydrate contribution to the final spectra. Analysis of SERS spectra could be beneficial for the detection of tissue-specific ACEs.

The infection of surgically placed implants is a problem that is both large in magnitude and that broadly affects nearly all surgical specialties. Implant-associated infections deleteriously affect patient quality-of-life and can lead to greater morbidity, mortality, and cost to the health care system. The impact of this problem has prompted extensive pre-clinical and clinical investigation into decreasing implant infection rates. More recently, antimicrobial approaches that modify or treat the implant directly have been of great interest. These approaches include antibacterial implant coatings (antifouling materials, antibiotics, metal ions, and antimicrobial peptides), antibacterial nanostructured implant surfaces, and antibiotic-releasing implants. This review provides a compendium of these approaches and the clinical applications and outcomes. In general, implant-specific modalities for reducing infections have been effective; however, most applications remain in the preclinical or early clinical stages.

The nanostructure-based surface texturing can be used to improve the materials wettability. Regarding oil–water separation, designing a surface with special wettability is as an important approach to improve the separation efficiency. Herein, a ZnO nanostructure was prepared by a two-step process for sol–gel process and crystal growth from the liquid phase to achieve both a superhydrophobicity in oil and a superoleophobic property in water. It is found that the filter material with nanostructures presented an excellent wettability. ZnO-coated stainless-steel metal fiber felt had a static underwater oil contact angle of 151.4° ± 0.8° and an underoil water contact angle of 152.7° ± 0.6°. Furthermore, to achieve water/oil separation, the emulsified impurities in both water-in-oil and oil-in-water emulsion were effectively intercepted. Our filter materials with a small pore (~5 μm diameter) could separate diverse water-in-oil and oil-in-water emulsions with a high efficiency (>98%). Finally, the efficacy of filtering quantity on separation performance was also investigated. Our preliminary results showed that the filtration flux decreased with the collection of emulsified impurities. However, the filtration flux could restore after cleaning and drying, suggesting the recyclable nature of our method. Our nanostructured filter material is a promising candidate for both water-in-oil and oil-in-water separation in industry.

Abstract Microprobes are used to repair neuronal injury by recording electrical signals from neuronal cells around the surface of the device. Following implantation into the brain, the immune response results in formation of scar tissue around the microprobe. However, neurons must be in close proximity to the microprobe to enable signal recording. A common reason for failure of microprobes is impaired signal recording due to scar tissue, which is not related to the microprobe itself. Therefore, the device–cell interface must be improved to increase the number of neurons in contact with the surface. In this study, we developed nanostructured SU-8 microprobes to support neuronal growth. Nanostructures of 200 nm diameter and depth were applied to the surface of microprobes, and the attachment and neurite outgrowth of PC12 cells on the microprobes were evaluated. Neuronal attachment and neurite outgrowth on the nanostructured microprobes were significantly greater than those on non-nanostructured microprobes. The enhanced neuronal attachment and neurite outgrowth on the nanostructured microprobes occurred in the absence of an adhesive coating, such as poly-l-lysine, and so may be useful for implantable devices for long-term use. Therefore, nanostructured microprobes can be implanted without adhesive coating, which can cause problems in vivo over the long term.

In this study, we have aimed at the preparation and characterization of poly-l-lactic acid (PLLA) composites with antibacterial properties. Thin bilayers of titanium and gold of various thickness ratios were deposited on PLLA by a cathode sputtering method; selected samples were subsequently thermally treated. The surface morphology of the prepared composites was studied by atomic force, scanning electron, and laser confocal microscopy. The chemical properties of the composites were determined by X-ray photoelectron and energy-dispersive X-ray spectroscopy in combination with contact angle and zeta potential analyses. The antibacterial properties of selected samples were examined against a Gram-negative bacterial strain of E. coli. We have found that a certain combination of Au and Ti nanolayers in combination with heat treatment leads to the formation of a unique wrinkled pattern. Moreover, we have developed a simple technique by which a large-scale sample modification can be easily produced. The dimensions of wrinkles can be tailored by the sequence and thickness of the deposited metals. A selected combination of gold, titanium, and heat treatment led to the formation of a nanowrinkled pattern with excellent antibacterial properties.

The addition of nanopillars to electrodes increases their electrochemical capabilities through an increase in electroactive surface area. The nanopillars can be applied on either cathodes or anodes to engage in reduction-oxidation reactions. This minireview summaries some work on cyclic voltammetry, chronoamperometry, impedance change on nanopillared surface and compared their electrochemistry behavior on planar surfaces.

This article is focused on the evaluation of surface properties of polytetrafluoroethylene (PTFE) nanotextile and a tetrafluoroethylene-perfluoro(alkoxy vinyl ether) (PFA) film and their surface activation with argon plasma treatment followed with silver nanoclusters deposition. Samples were subjected to plasma modification for a different time exposure, silver deposition for different time periods, or their combination. As an alternative approach, the foils were coated with poly-L-lactic acid (PLLA) and silver. The following methods were used to study the surface properties of the polymers: goniometry, atomic force microscopy, and X-ray photoelectron microscopy. By combining the aforementioned methods for material surface modification, substrates with antibacterial properties eliminating the growth of Gram-positive and Gram-negative bacteria were prepared. Studies of antimicrobial activity showed that PTFE plasma-modified samples coated with PLLA and deposited with a thin layer of Ag had a strong antimicrobial effect, which was also observed for the PFA material against the bacterial strain of S. aureus. Significant antibacterial effect against S. aureus, Proteus sp. and E. coli has been demonstrated on PTFE nanotextile plasma-treated for 240 s, coated with PLLA, and subsequently sputtered with thin Ag layer.

Bacterial fimbriae are an important virulence factor mediating adhesion to both biotic and abiotic surfaces and facilitating biofilm formation. The expression of type 1 fimbriae of Escherichia coli is a key virulence factor for urinary tract infections and catheter-associated urinary tract infections, which represent the most common nosocomial infections. New strategies to reduce adhesion of bacteria to surfaces is therefore warranted. The aim of the present study was to investigate how surfaces with different nanotopography-influenced fimbriae-mediated adhesion. Surfaces with three different nanopattern surface coverages made in polycarbonate were fabricated by injection molding from electron beam lithography nanopatterned templates. The surfaces were constructed with features of approximately 40 nm width and 25 nm height with 100 nm, 250 nm, and 500 nm interspace distance, respectively. The role of fimbriae type 1-mediated adhesion was investigated using the E. coli wild type BW25113 and ΔfimA (with a knockout of major pilus protein FimA) and ΔfimH (with a knockout of minor protein FimH) mutants. For the surfaces with nanotopography, all strains adhered least to areas with the largest interpillar distance (500 nm). For the E. coli wild type, no difference in adhesion between surfaces without pillars and the largest interpillar distance was observed. For the deletion mutants, increased adhesion was observed for surfaces without pillars compared to surfaces with the largest interpillar distance. The presence of a fully functional type 1 fimbria decreased the bacterial adhesion to the nanopatterned surfaces in comparison to the mutants.

The method of synthesis of bimetallic Pd–Ag pentagonally structured catalyst “nanostar” on the surface of Pd-23%Ag alloy films has been developed. The resulting catalyst was studied as a highly active functional layer for methanol oxidation reaction (MOR) in alkaline media and the intensification of hydrogen transport through the Pd-23%Ag membrane in the processes of hydrogen diffusion purification. A modifying layer with a controlled size, composition and excellent electrocatalytic activity was synthesized by electrochemical deposition at a reduced current density compared to classical methods. The low deposition rate affects the formation of pentagonally structured nanocrystallites, allowing Pd and Ag particles to form well-defined structures due to the properties of the surfactant used. Electrochemical studies have demonstrated that the catalyst synthesized by the “nanostar” method shows better electrocatalytic activity in relation to MOR and demonstrates a higher peak current (up to 17.82 µA cm−2) in comparison with one for the catalyst synthesized by the “nanoparticle” method (up to 10.66 µA cm−2) in a cyclic voltammetric study. The nanostar catalyst electrode releases the highest current density (0.25 µA cm−2) for MOR and demonstrates higher catalytic activity for the oxidation of possible intermediates such as sodium formate in MOR. In the processes of diffusion membrane purification of hydrogen, a multiple increase in the density of the penetrating flux of hydrogen through the membranes modified by the “nanostar” catalyst (up to 10.6 mmol s−1 m−2) was demonstrated in comparison with the membranes modified by the “nanoparticles” method (up to 4.49 mmol s−1 m−2). Research data may indicate that the properties of the developed pentagonally structured catalyst “nanostar” and its enhanced activity with respect to reactions involving hydrogen increase the desorption activity of the membrane, which ultimately accelerates the overall stepwise transfer of hydrogen across the membrane.

The urgent need to develop a detection system for Staphylococcus aureus, one of the most common causes of infection, is prompting research towards novel approaches and devices, with a particular focus on point-of-care analysis. Biosensors are promising systems to achieve this aim. We coupled the selectivity and affinity of aptamers, short nucleic acids sequences able to recognize specific epitopes on bacterial surface, immobilized at high density on a nanostructured zirconium dioxide surface, with the rational design of specifically interacting fluorescent peptides to assemble an easy-to-use detection device. We show that the displacement of fluorescent peptides upon the competitive binding of S. aureus to immobilized aptamers can be detected and quantified through fluorescence loss. This approach could be also applied to the detection of other bacterial species once aptamers interacting with specific antigens will be identified, allowing the development of a platform for easy detection of a pathogen without requiring access to a healthcare environment.

Nanostructured surfaces can be engineered to kill bacteria in a contact-dependent manner. The study of bacterial interactions with a nanoscale topology is thus crucial to developing antibacterial surfaces. Here, a systematic study of the effects of nanoscale topology on bactericidal activity is presented. We describe the antibacterial properties of highly ordered and uniformly arrayed cotton swab-shaped (or mushroom-shaped) nanopillars. These nanostructured surfaces show bactericidal activity against Staphylococcus aureus and Pseudomonas aeruginosa. A biophysical model of the cell envelope in contact with the surface, developed ab initio from the infinitesimal strain theory, suggests that bacterial adhesion and subsequent lysis are highly influenced by the bending rigidity of the cell envelope and the surface topography formed by the nanopillars. We used the biophysical model to analyse the influence of the nanopillar cap geometry on the bactericidal activity and made several geometrical alterations of the nanostructured surface. Measurement of the bactericidal activities of these surfaces confirms model predictions, highlights the non-trivial role of cell envelope bending rigidity, and sheds light on the effects of nanopillar cap architecture on the interactions with the bacterial envelope. More importantly, our results show that the surface nanotopology can be rationally designed to enhance the bactericidal efficiency.

TiO2−Ag2O composite nanorods with various Ag2O configurations were synthesized by a two-step process, in which the core TiO2 nanorods were prepared by the hydrothermal method and subsequently the Ag2O crystals were deposited by sputtering deposition. Two types of the TiO2−Ag2O composite nanorods were fabricated; specifically, discrete Ag2O particle-decorated TiO2 composite nanorods and layered Ag2O-encapsulated TiO2 core−shell nanorods were designed by controlling the sputtering duration of the Ag2O. The structural analysis revealed that the TiO2−Ag2O composite nanorods have high crystallinity. Moreover, precise control of the Ag2O sputtering duration realized the dispersive decoration of the Ag2O particles on the surfaces of the TiO2 nanorods. By contrast, aggregation of the massive Ag2O particles occurred with a prolonged Ag2O sputtering duration; this engendered a layered coverage of the Ag2O clusters on the surfaces of the TiO2 nanorods. The TiO2−Ag2O composite nanorods with different Ag2O coverage morphologies were used as chemoresistive sensors for the detection of trace amounts of NO2 gas. The NO2 gas-sensing performances of various TiO2−Ag2O composite nanorods were compared with that of pristine TiO2 nanorods. The underlying mechanisms for the enhanced sensing performance were also discussed.

Photonic crystal (PC) surfaces have been demonstrated as a compelling platform for improving the sensitivity of surface-based fluorescent assays used in disease diagnostics and life science research. PCs can be engineered to support optical resonances at specific wavelengths at which strong electromagnetic fields are utilized to enhance the intensity of surface-bound fluorophore excitation. Meanwhile, the leaky resonant modes of PCs can be used to direct emitted photons within a narrow range of angles for more efficient collection by a fluorescence detection system. The multiplicative effects of enhanced excitation combined with enhanced photon extraction combine to provide improved signal-to-noise ratios for detection of fluorescent emitters, which in turn can be used to reduce the limits of detection of low concentration analytes, such as disease biomarker proteins. Fabrication of PCs using inexpensive manufacturing methods and materials that include replica molding on plastic, nano-imprint lithography on quartz substrates result in devices that are practical for single-use disposable applications. In this review, we will describe the motivation for implementing high-sensitivity fluorescence detection in the context of molecular diagnosis and gene expression analysis though the use of PC surfaces. Recent efforts to improve the design and fabrication of PCs and their associated detection instrumentation are summarized, including the use of PCs coupled with Fabry-Perot cavities and external cavity lasers.

A design study of a nanostructured two-dimensional plasmonic crystal based on aluminum and polymeric material for label-free optical biosensing is presented. The structure is formed of Al nanohole and nanodisk array layers physically separated by a polymeric film. The photonic configuration was analyzed through finite-difference time-domain (FDTD) simulations. The calculated spectral reflectance of the device exhibits a surface plasmon polariton (SPP) resonance feature sensitive to the presence of a modeled biolayer adhered onto the metal surfaces. Simulations also reveal that the Al disks suppress an undesired SPP resonance, improving the device performance in terms of resolution as compared to that of a similar configuration without Al disks. On the basis of manufacturability issues, nanohole diameter and depth were considered as design parameters, and a multi-objective optimization process was employed to determine the optimum dimensional values from both performance and fabrication points of view. The effect of Al oxidation, which is expected to occur in an actual device, was also studied.