Search

Lipid nanoparticles (LNPs) are designed to protect and transport sensitive payloads or active pharmaceutical ingredients as part of new therapeutic modalities. As a multi-component particle, a high degree of quality control is necessary to ensure raw materials are free of critical impurities that could adversely impact the drug product. In this study, we demonstrate a reversed phase liquid chromatography method hyphenated with a single quadrupole mass spectrometer (RPLC-MS) as an alternative platform to methods that incorporate evaporative light scattering or charged aerosol detectors in the detection and quantitation of critical impurities associated with LNPs. The proposed RPLC-MS method offers an increase of up to 2 orders of magnitude in dynamic range and 3 orders of magnitude in sensitivity in the analysis of impurities associated with LNPs compared to conventional detectors. Access to complementary mass data enabled the detection and identification of stability indicating impurities as part of stress studies carried out on an ionizable lipid. In addition to confirmation of peak identity, complementary mass data was also used to assess residual aldehydes in raw material and formulated LNPs in accordance with regulatory guidance. Following derivatization using 2,4-dinitrophenylhydrazine, aldehyde content in the ionizable lipid raw material was determined to exceed the reporting threshold of 0.05% in 30% of the test cases. The experimental findings observed in this study demonstrate the utility of the proposed RPLC-MS method in the identification and monitoring of stability-indicating attributes associated with LNPs as part of current Good Manufacturing Practices for improved consumer safety in drug products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

The 6:2 fluorotelomer sulfonamide (6:2 FTSAm)-based compounds signify a prominent group of per- and polyfluoroalkyl substances (PFAS) widely used in contemporary aqueous film-forming foam (AFFF) formulations. Despite their widespread presence, the biotransformation behavior of these compounds in wastewater treatment plants remains uncertain. This study investigated the biotransformation of 6:2 FTSAm-based amine oxide (6:2 FTNO), alkylbetaine (6:2 FTAB), and 6:2 fluorotelomer sulfonic acid (6:2 FTSA) in aerobic sludge over a 100-day incubation period. The biotransformation of 6:2 fluorotelomer sulfonamide alkylamine (6:2 FTAA), a primary intermediate product of 6:2 FTNO, was indirectly assessed. Their stability was ranked based on the estimated half-lives ( t 1/2 ): 6:2 FTAB (no obvious products were detected) ≫ 6:2 FTSA ( t 1/2 ≈28.8 days) > 6:2 FTAA ( t 1/2 ≈11.5 days) > 6:2 FTNO ( t 1/2 ≈1.2 days). Seven transformation products of 6:2 FTSA and 15 products of 6:2 FTNO were identified through nontarget and suspect screening using high-resolution mass spectrometry. The transformation pathways of 6:2 FTNO and 6:2 FTSA in aerobic sludge were proposed. Interestingly, 6:2 FTSAm was hardly hydrolyzed to 6:2 FTSA and further biotransformed to perfluoroalkyl carboxylic acids (PFCAs). Furthermore, the novel pathways for the generation of perfluoroheptanoic acid (PFHpA) from 6:2 FTSA were revealed.

A surfactant, R-6-AO, derived from dehydroabietic acid has been synthesized. It behaves as a highly efficient low-molecular-weight hydrogelator with an extremely low critical gelation concentration (CGC) of 0.18 wt % (4 mm). R-6-AO not only stabilizes oil-in-water (O/W) emulsions at concentrations above its critical micelle concentration (cmc) of 0.6 mm, but also forms gel emulsions at concentrations beyond the CGC with the oil volume fraction freely adjustable between 2 % and 95 %. Cryo-TEM images reveal that R-6-AO molecules self-assemble into left-handed helical fibers with cross-sectional diameters of about 10 nm in pure water, which can be turned to very stable hydrogels at concentrations above the CGC. The gel emulsions stabilized by R-6-AO can be prepared with different oils (n-dodecane, n-decane, n-octane, soybean oil, olive oil, tricaprylin) owing to the tricyclic diterpene hydrophobic structure in their molecules that enables them to adopt a unique arrangement in the fibers., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Amine oxide (AO) surfactants are used widely in North American household detergents resulting in >44,000mtons disposed down the drain annually. Due to AOs substantial down the drain disposal volume, wide dispersive use, and high aquatic toxicity, there is a need to evaluate ecological exposure and corresponding risk. This study refined the current knowledge regarding the fate of AO disposed down the drain through laboratory simulation studies to evaluate biodegradation in the sewer and during activated sludge wastewater treatment. A monitoring program which measured effluent AO concentrations for the dominant carbon chain lengths, C12 and C14, at 44 wastewater treatment plants (WWTP) across the continental US was also conducted. The study results were then used as input into probabilistic exposure models to predict US receiving stream concentrations. In three separate OECD 314A Sewer Water Die-Away studies AO was rapidly biodegraded with >76% mineralized by study completion and the geometric mean of the primary biodegradation rates being 0.184h - 1 . Two OECD 303A Activated Sludge WWTP Simulation studies showed rapid and complete biodegradation of AO with ≤0.09% of parent AO remaining in the effluent, ≤0.03% of parent AO sorbed to sludge solids, and >97% complete mineralization of AO. Monitoring at US WWPTs confirmed low levels of AO in effluents with mean C12 and C14AO concentrations of 52.8 and 20.1ng/L respectively. Based on the monitoring data, the 90th percentile concentrations of C12 and C14AO for 7Q10 low flow stream conditions were >2 orders of magnitude lower than the predicted no effect concentrations indicating negligible aquatic risk from AO in US receiving streams. This study verifies that AO is safe for the aquatic environment even at the currently high usage volumes due to rapid biodegradation during transit through the sewer and wastewater treatment., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Amine oxide (AO) is a cationically charged surfactant at environmental pH and has previously been assessed in the OECD (Organization for Economic Cooperation and Development) High Production Volume (HPV) chemicals program. Typical of cationic chemicals, AO is highly aquatically toxic. In this study we vastly improve the knowledge of AO toxicity by developing acute Quantitative Structure Activity Relationships (QSARs) for an alga (Desmodesmus subspicatus), an invertebrate (Daphnia magna) and a fish (Danio rerio) using the appropriate array of OECD Test Guidelines. A chronic toxicity QSAR was also determined for the most sensitive taxon, Desmodesmus. Pure AO spanning the chain lengths of C8 to C16 were tested individually with trace analytical confirmation of exposures in all tests. The QSARs were all of high quality (R 2 0.92-0.98) with slopes ranging from -0.338 to -0.484. QSARs were then used to normalize toxicity outcomes for a larger, previously published data set used in HPV, European REACH (Registration, Evaluation, and Authorization of Chemicals), and peer reviewed publications. Two additional species, Lemna gibba (macrophyte) and Ankistrodesmus falcatus (alga) were studied in exposures to dodecyl (C12) AO to provide sufficient taxonomic diversity to conduct a Species Sensitivity Distribution (SSD) analysis. The SSD 5th percentile hazardous concentration (HC5) to C12 AO was found to be 0.052mg/L which is similar to an existing AO 28-d, 3-community periphyton community bioassay normalized to C12 AO (No-observed-effect-concentration or NOEC=0.152mg/L). The statistical properties of the SSD was probed suggesting that new studies of additional taxa would be required that were at least 10-fold more sensitive than the most sensitive taxon to move the HC5 lower by a factor of 3. The overall AO hazard assessment suggests a large margin of safety relative to published environmental exposure data., (Copyright © 2016 Elsevier Inc. All rights reserved.)