Search

With the rapid development of information technology, high-speed digital optical signal transmission technology has become the core of modern communication networks. However, the increase in transmission rates brings challenges such as noise, distortion, and interference, which affect the accuracy of clock recovery. To address these issues, this study proposes a clock recovery algorithm based on the eye diagram opening area to improve the accuracy and efficiency of high-speed digital optical signal jitter measurement. The proposed method extracts clock information from the signal using the opening area and curvature characteristics of the eye diagram for jitter measurement. Experimental results demonstrate that the clock recovery algorithm based on the eye diagram opening area can stably reconstruct the signal eye diagram and obtain jitter parameters under different optical power conditions. At optical powers of -7.2 dBm, -12.2 dBm, and -17.2 dBm, the Q-factors were 8.8, 7.6, and 4.3, respectively, and the RMS jitter values were 12.2 ps, 13.4 ps, and 21.2 ps, respectively. At optical powers of -2.3 dBm, 0.1 dBm, 2.4 dBm, 4.6 dBm, and 6.0 dBm, the Q-factors were 9.1, 9.3, 9.5, 9.7, and 10.0, respectively, and the average jitter values were 8.9 ps, 8.5 ps, 8.0 ps, 7.5 ps, and 7.0 ps. These results indicate that the proposed algorithm performs excellently under low optical power conditions and maintains high recovery accuracy even when jitter increases at higher optical powers. The clock recovery algorithm based on the eye diagram opening area significantly improves the accuracy and stability of high-speed digital optical signal jitter measurement, enriches the theoretical research of clock recovery algorithms, and shows significant advantages in improving signal transmission quality, reducing bit error rate, and enhancing communication link reliability. The research outcomes provide key technical support for the optimization of modern high-speed optical communication systems., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Author.)

The integration of large intelligent surfaces (LIS) with non-orthogonal multiple access (NOMA) networks has emerged as a promising solution to enhance the capacity and coverage of wireless communication systems. In this study, we analyse the performance of a NOMA network with the assistance of LIS. We propose a system model where a base station (BS) equipped with a LIS serves multiple users. The LIS consists of many passive elements that can influence the wireless channel by adjusting the reflection coefficients. We consider a downlink scenario where the BS transmits to multiple users simultaneously using NOMA, and the LIS helps to improve the signal quality and coverage. We additionally evaluate the efficiency of the suggested LIS-assisted NOMA network. In addition, we evaluate the efficiency of the LIS-assisted NOMA network in comparison to conventional NOMA systems that do not utilize LISs. The findings indicate that the LIS has a notable impact on enhancing the system's performance in terms of diversity gain, probability of error, and pairwise error probability (PEP). Moreover, the suggested LIS-assisted NOMA network is shown to be superior to conventional NOMA systems through comparison. These findings offer useful insights into the performance analysis of LIS-assisted NOMA networks. They also serve as inspiration and motivation for future research and development in this new subject, with the potential to revolutionize wireless communication systems., (© 2024. The Author(s).)

This paper studies the maximum reliability of multi-hop relay UAVs, in which UAVs provide wireless services for remote users as a coded cooperative relay without an end-to-end direct communication link. In this paper, the analytical expressions of the total power loss and total bit error rate are derived as reliability measures. First, based on the environmental statistical parameters, a LOS probability model is proposed. Then, the problem of minimizing the bit error rate of static and mobile UAVs is studied. The goal is to minimize the total bit error rate by jointly optimizing the height, elevation, power and path loss and introducing the maximum allowable path loss constraints, transmission power allocation constraints, and UAV height and elevation constraints. At the same time, the total path loss is minimized to achieve maximum ground communication coverage. However, the formulated joint optimization problem is nonconvex and generally difficult to solve. Therefore, we decomposed the problem into two subproblems and proposed an effective joint optimization iteration algorithm. Finally, the simulation results are given, and the analysis shows that the optimal height of different reliability measures is slightly different; thus, using the mobility of UAVs can improve the reliability of communication performance.

Time-hopping pulse position modulation (TH-PPM) stands out as a secure communication due to the pseudo-random characteristics of its time-hopping sequence. However, the conventional TH-PPM transceiver encounters challenges in implementation, particularly in achieving the requisite high precision for synchronization. This paper introduces a novel non-coherent Q -ary TH-PPM transceiver, designed to surpass the Bit error rate (BER) performance of conventional TH-PPM transceivers in scenarios under non-ideal synchronization conditions, which also being straightforward to implement. Firstly, we provide an overview of the conventional TH-PPM transceiver. Secondly, the novel TH-PPM transceiver is introduced. In this context, a novel method for generating the TH-PPM signal is proposed for the transmitter, and a parallel matched-filter algorithm, adapted to the new TH-PPM signal, is presented for the receiver. Subsequently, the investigation delves into an in-depth analysis of BER performance, considering both ideal synchronization conditions and non-ideal synchronization conditions, for both the conventional and the new TH-PPM transceiver. Furthermore, the paper proposes a numerical simulation to validate the theoretical findings. The results demonstrate that the new TH-PPM transceiver outperforms the conventional counterpart by showing better BER performance in scenarios with non-ideal synchronization conditions.

Adaptive equalization is crucial in mitigating distortions and compensating for frequency response variations in communication systems. It aims to enhance signal quality by adjusting the characteristics of the received signal. Particle swarm optimization (PSO) algorithms have shown promise in optimizing the tap weights of the equalizer. However, there is a need to enhance the optimization capabilities of PSO further to improve the equalization performance. This paper provides a comprehensive study of the issues and challenges of adaptive filtering by comparing different variants of PSO and analyzing the performance by combining PSO with other optimization algorithms to achieve better convergence, accuracy, and adaptability. Traditional PSO algorithms often suffer from high computational complexity and slow convergence rates, limiting their effectiveness in solving complex optimization problems. To address these limitations, this paper proposes a set of techniques aimed at reducing the complexity and accelerating the convergence of PSO.

The Vehicular ad-Hoc Network (VANET) is envisioned to ensure wireless transmission with ultra-high reliability. In the presence of fading and mobility of vehicles, error-free information between Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I) requires extensive investigation. The current literature lacks in designing an ultra-reliable comprehensive tractable model for VANET using millimeter wave. Ultra-reliable communication is needed to support autonomous vehicular communication. This article aims to provide a comprehensive tractable model for VANET over millimeter waves using Space-Time-Block-Coding (STBC) concatenated with Reed Solomon (RS) coding. The designed model provides the fastest way of designing and analyzing VANET networks on 60 GHz. By using the derived BER expressions and Reed Solomon coded doppler expression ultra-reliable vehicular networks can be build meeting the demands of massive growing volume of traffic. The performance of the model is compared with previous BER computational techniques and existing VANET communication systems, i.e ., IEEE 802.11bd and 3rd generation partnership project vehicle to everything (3GPP V2X). The findings show that our proposed approach outperforms IEEE 802.11bd and the results are comparable with V2X NR. Packet Error Rate (PER), Packet Reception Ratio (PRR) and throughput are used as performance metrics. We have also evaluated the model on higher velocities of vehicles. Further, the simulation and numerical findings show that the proposed system surpass the existing BER results comprising of various modulation and coding techniques. The simulation results are verified by the numerical results there-by, showing the accuracy of our derived expressions., Competing Interests: Ali Kashif Bashir is an Academic Editor for PeerJ., (© 2023 Ahmed et al.)

Multicarrier backscattering has been proposed to improve the communication rate, but the complex circuit structure of multicarrier backscattering devices requires more power consumption, resulting in devices far away from the radio frequency (RF) source without enough power to maintain communication, which greatly reduces the limited communication range in backscattering. To solve this problem, this paper introduces carrier index modulation (IM) into orthogonal frequency division multiplexing (OFDM) backscattering and proposes a dynamic subcarrier activated OFDM-IM uplink communication scheme suitable for passive backscattering devices. When the existing power collection level of the backscatter device is detected, only a subset of carrier modulation is activated using part of the circuit modules to reduce the power threshold required for device activation. The activated subcarriers are mapped by a block-wise combined index using the look-up table method, which can not only transmit information using traditional constellation modulation but also carry additional information through the frequency domain carrier index. Monte Carlo experiments show that this scheme can effectively increase the communication distance and improve the spectral efficiency of low-order modulation backscattering when the power of the transmitting source is limited.

In this article, we divide the irradiated area of visible light communication (VLC) into three parts, according to the influence of diffuse reflection, the irradiance half angle at the source and the communication distance on VLC. We present a volume ratio method to quantitatively analyze each divided part. In this work, based on the Lambertian reflection model of the VLC system in line-of-sight channels, five factors affecting the VLC performance are compared and discussed. A VLC system of a single white-light-emitting diode in a 10 m line-of-sight channel indoors is designed by using the intensity modulation and direct detection technique, and a three-dimensional model of the irradiated area is established.By comparing the distribution of the bit error rate (BER) of the optical signal at different lampshade heights, the volume ratio method is used to calculate the volume percentage of the three irradiated areas. The experimental results show that area II with a volume ratio greater than 50% is the best signal receiving area when compared with areas I and III, having a volume ratio in the range 20∼30%.

Quadrature phase shift keying (QPSK) is a digital modulation technique that transmits data at a constant frequency whilst varying the phases of the carrier signal. QPSK is one of the fundamental modulation schemes for orthogonal frequency division multiplexing systems (OFDM). It is a stable modulation technique with good spectral efficiency. However, during transmission, the carrier signal can undergo numerous phase changes. This creates phase ambiguity problems at the receiver end. This results in inter-symbol interference (ISI) and a high bit error rate (BER). In this paper, the wind-driven optimization was incorporated into the genetic algorithm (GA) as its population selection function. This hybrid algorithm was used to determine the phase assignments for the QPSK. The developed QPSK was implemented on an OFDM network and the message signal was recovered at more than 92% accuracy in a noisy Rayleigh fading channel and 100% accuracy in a noiseless channel. The enhancements greatly mitigated phase ambiguity and bit errors.

Long Range (LoRa) systems have recently attracted significant attention within the research community as well as for commercial use due to their ability to transmit data over long distances at a relatively low energy cost. In this study, new results for the bit error rate performance of Long Range (LoRa) systems operating in the presence of Rayleigh, Rice, Nakagami- m , Hoyt, η-μ and generalized fading channels are presented. Specifically, we propose novel exact single integral expressions as well as simple, accurate expressions that yield tight results in the entire signal-to-noise ratio (SNR) region. The validity of our newly derived formulas is substantiated by comparing numerically evaluated results with equivalent ones, obtained using Monte-Carlo simulations and exact analytical expressions.

Wireless in vivo actuators and sensors are examples of sophisticated technologies. Another breakthrough is the use of in vivo wireless medical devices, which provide scalable and cost-effective solutions for wearable device integration. In vivo wireless body area networks devices reduce surgery invasiveness and provide continuous health monitoring. Also, patient data may be collected over a long period of time. Given the large fading in in vivo channels due to the signal path going through flesh, bones, skins, and blood, channel coding is considered a solution for increasing the efficiency and overcoming inter-symbol interference in wireless communications. Simulations are performed by using 50 MHz bandwidth at Ultra-Wideband frequencies (3.10-10.60 GHz). Optimal channel coding (Turbo codes, Convolutional codes, with the help of polar codes) improves data transmission performance over the in vivo channel in this research. Moreover, the results reveal that turbo codes outperform polar and convolutional codes in terms of bit error rate. Other approaches perform similarly when the information block length is increased. The simulation in this work indicates that the in vivo channel shows less performance than the Rayleigh channel due to the dense structure of the human body (flesh, skins, blood, bones, muscles, and fat).

In this paper, we propose underwater acoustic (UWA) communications using a generalized sinusoidal frequency modulation (GSFM) waveform, which has a distinct ambiguity function (AF) and correlation function characteristic. For these reasons, it is more robust in multipath channels than the conventional chirp spread spectrum (CSS) with a linear frequency modulation (LFM) waveform. Four types of GSFM waveforms that are orthogonal to each other are applied for each symbol in the proposed method. To evaluate the performance of the proposed method, we compared the performances of the proposed method and conventional method by conducting diverse experiments: simulations, lake trials and sea trials. In the simulation results, the proposed method shows better performance than the conventional method. The lake trial was conducted with a distance of 300~400 m between the transmitter and receiver. As a result of the experiment, the average bit error rate (BER) of the proposed method is 3.52×10-2 and that of the conventional method is 3.52×10-1, which shows that the proposed method is superior to the conventional method. The sea trial was conducted at a distance of approximately 20 km between the transmitter and receiver at a depth of 1500 m, and the receiver was composed of 16 vertical line arrays (VLAs) with a hydrophone. The proposed method had a BER of 0.3×10-2 in one channel and was error free in the other.

This paper introduces the structure of a Q -ary pulse position modulation (PPM) signal and presents a noncoherent suboptimal receiver and a noncoherent optimal receiver. Aiming at addressing the lack of an accurate theoretical formula of the bit error rate (BER) of a Q -ary PPM receiver in the additive white Gaussian noise (AWGN) channel in the existing literature, the theoretical formulas of the BER of a noncoherent suboptimal receiver and noncoherent optimal receiver are derived, respectively. The simulation results verify the correctness of the theoretical formulas. The theoretical formulas can be applied to a Q -ary PPM system including binary PPM. In addition, the analysis shows that the larger the Q , the better the error performance of the receiver and that the error performance of the optimal receiver is about 2 dB better than that of the suboptimal receiver. The relationship between the threshold coefficient of the suboptimal receiver and the error performance is also given.

In this paper, a novel interference free dual-hop device-to-device (D2D) aided cooperative relaying strategy (CRS) based on spatial modulation (SM) (termed D2D-CRS-SM) is proposed. In D2D-CRS-SM, two cellular users (e.g., a near user (NU) and a relay-aided far user (FU)) and a pair of D2D transmitter (D1)-receivers (D2) are served in two time-slots. Two different scenarios are investigated considering information reception criteria at the NU. Irrespective of the scenarios, the base station (BS) exploits SM to map information bits into two sets: modulation bits and antenna index, in phase-1. In the first scenario, the BS maps FU information as the modulation bits and NU information as antenna index, whereas modulation bits correspond to NU information and the antenna index carries FU's information in scenario-2. The iterative-maximum ratio combining ( i -MRC) technique is then used by NU and D1 to de-map their desired information bits. During phase-2, D1 also exploits SM to forward FU's information received from BS and its own information bits to the D2D receiver D2. Then, FU and D2 retrieve their desired information by using i -MRC. Due to exploiting SM in both phases, interference free information reception is possible at each receiving node without allocating any fixed transmit power. The performance of D2D-CRS-SM is studied in terms of bit-error rate and spectral efficiency considering M -ary phase shift keying and quadrature amplitude modulation. Finally, the efficiency of D2D-CRS-SM is demonstrated via the Monte Carlo simulation.

The propagation of light underwater is tied closely to the optical properties of water. In particular, the underwater channel imposes attenuation on the optical signal in the form of scattering, absorption, and turbulence. These attenuation factors can lead to severe spatial and temporal dispersion, which restricts communication to a limited range and bandwidth. In this paper, we propose a statistical model to estimate the probability density function of the temporal dispersion in underwater wireless optical communication (UWOC) based Internet of Underwater Things (IoUTs) using discrete histograms. The underwater optical channel is modeled using Monte Carlo simulations, and the effects of temporal dispersion are presented by measuring the magnitude response of the channel in terms of received power. The temporal response analysis is followed by an extensive performance evaluation in terms of bit error rate (BER). To facilitate in-depth theoretical analysis, we have measured and presented magnitude response and BER of the channel under different field-of-views (FoVs), apertures, and water types. The three main areas under study are (i) BER versus link distance behavior, (ii) temporal response of the channel, and (iii) effect of scattering on photon travel. Our study shows the two main factors that contribute to beam spreading and temporal dispersion are (i) diffusivity of the optical source and (ii) multiple scattering. Furthermore, our results suggest that temporal dispersion caused due to multiple scattering cannot be mitigated completely; however, it can be minimized by optimizing the receiver aperture.

The evolution of microelectronics increased the information acquired by today's biomedical sensor systems to an extent where the capacity of low-power communication interfaces becomes one of the central bottlenecks. Hence, this paper mathematically analyzes and experimentally verifies novel coil and transceiver topologies for near-field communication interfaces, which simultaneously allow for high data transfer rates, low power consumption, and reduced interference to nearby wireless power transfer interfaces. Data coil design is focused on presenting two particular topologies which provide sufficient coupling between a reader and a wireless sensor system, but do not couple to an energy coil situated on the same substrate, severely reducing interference between wireless data and energy transfer interfaces. A novel transceiver design combines the approaches of a minimalistic analog front-end with a fully digital single-bit sampling demodulator, in which rectangular binary signals are processed by simple digital circuits instead of sinusoidal signals being conditioned by complex analog mixers and subsequent multi-bit analog-to-digital converters. The concepts are implemented using an analog interface in discrete circuit technology and a commercial low-power field-programmable gate array, yielding a transceiver which supports data rates of up to 6.78 MBit/s with an energy consumption of just 646 pJ/bit in transmitting mode and of 364 pJ/bit in receiving mode at a bit error rate of 2×10-7, being 10 times more energy efficient than any commercial NFC interface and fully implementable without any custom CMOS technology.

To maximize the limited spectrum among primary users and cognitive Internet of Things (IoT) users as we save the limited power and energy resources available, there is a need to optimize network resources. Whereas it is quite complex to study the impact of transmission rate, transmission power or transmission delay alone, the complexity is aggravated by the simultaneous consideration of all these three variables jointly in addition to a channel selection variable, since it creates a non-convex problem. Our objective is to jointly optimize the three major variables; transmission power, rate and delay under constraints of Bit Error Rate (BER), interference and other channel limitations. We analyze how total power, rate and delay vary with packet size, network size, BER and interference. The resulting problem is solved using a branch-and-cut polyhedral approach. For simulation of results, we use MATLAB together with the state-of-the-art BARON software. It is observed that an increase in packet size generally leads to an increase in total rate, total power and total transmission delay. It is also observed that increasing the number of secondary users on the channel generally leads to an increased power, delay and rate.

Integrated circuits may be vulnerable to hardware Trojan attacks during its design or fabrication phases. This article is a case study of the design of a Viterbi decoder and the effect of hardware Trojans on a coded communication system employing the Viterbi decoder. Design of a Viterbi decoder and possible hardware Trojan models for the same are proposed. An FPGA-based implementation of the decoder and the associated Trojan circuits have been discussed. The noise-added encoded input data stream is stored in the block RAM of the FPGA and the decoded data stream is monitored on the PC through an universal asynchronous receiver transmitter interface. The implementation results show that there is barely any change in the LUTs used (0.5%) and power dissipation (3%) due to the insertion of the proposed Trojan circuits, thus establishing the surreptitious nature of the Trojan. In spite of the fact that the Trojans cause negligible changes in the circuit parameters, there are significant changes in the bit error rate (BER) due to the presence of Trojans. In the absence of Trojans, BER drops down to zero for signal to noise rations (SNRs) higher than 6 dB, but with the presence of Trojans, BER doesn't reduce to zero even at a very high SNRs. This is true even with the Trojan being activated only once during the entire duration of the transmission., Competing Interests: Deepak Mishra is a scientist at the Indian Space Research Organization (ISRO), Ahmedabad, India., (© 2020 Kakkara et al.)

The coming years may see the advent of distributed implantable devices to support bioelectronic medicinal treatments. Communication between implantable components and between deep implants and the outside world can be challenging. Percutaneous wired connectivity is undesirable and both radiofrequency and optical methods are limited by tissue absorption and power safety limits. As such, there is a significant potential niche for ultrasound communications in this domain. In this paper, we present the design and testing of a reliable and efficient ultrasonic communication telemetry scheme using piezoelectric transducers that operate at 320 kHz frequency. A key challenge results from the multi-propagation path effect. Therefore, we present a method, using short pulse sequences with relaxation intervals. To counter an increasing bit, and thus packet, error rate with distance, we have incorporated an error correction encoding scheme. We then demonstrate how the communication scheme can scale to a network of implantable devices. We demonstrate that we can achieve an effective, error-free, data rate of 0.6 kbps, which is sufficient for low data rate bioelectronic medicine applications. Transmission can be achieved at an energy cost of 642 nJ per bit data packet using on/off power cycling in the electronics., Competing Interests: The authors declare no conflict of interest.

Mathematical models and imaging models that show the relationship between the transition points mismatch of analog-to-digital converters (ADCs) and the bit error rate (BER) in single-bit and multi-bit quanta image sensors (QISs) are established. The mathematical models suggest that when the root-mean-square (r.m.s.) of the read noise in jots is 0.15e - , the standard deviation of the transition points should be less than 0.15e - to ensure that the BER is lower than 1% in the single-bit QIS, and 0.21e - to ensure that the BER is lower than 5% in the multi-bit QIS. Based on the mathematical models, the imaging models prove that the fixed-pattern noise (FPN) increases with a stronger transition point mismatch. The imaging models also compare the imaging quality in the case of different spatial oversampling factors and bit depths. The grayscale similarity index (GSI) is 3.31 LSB and 1.74 LSB when the spatial oversampling factors are 256 and 4096, respectively, in the single-bit QIS. The GSI is 1.93 LSB and 1.13 LSB when the bit depth is 3 and 4, respectively, in the multi-bit QIS. It indicates that a higher bit depth and a larger spatial oversampling factor could reduce the effect of the transition points mismatch of1-bit or n -bit ADCs.

Unmanned aerial vehicles (UAVs) require data-link system to link ground data terminals to the real-time controls of each UAV. Consequently, the ability to predict the health status of a UAV data-link system is vital for safe and efficient operations. The performance of a UAV data-link system is affected by the health status of both the hardware and UAV data-links. This paper proposes a method for predicting the health state of a UAV data-link system based on a Bayesian network fusion of information about potential hardware device failures and link failures. Our model employs the Bayesian network to describe the information and uncertainty associated with a complex multi-level system. To predict the health status of the UAV data-link, we use the health status information about the root node equipment with various life characteristics along with the health status of the links as affected by the bit error rate. In order to test the validity of the model, we tested its prediction of the health of a multi-level solar-powered unmanned aerial vehicle data-link system and the result shows that the method can quantitatively predict the health status of the solar-powered UAV data-link system. The results can provide guidance for improving the reliability of UAV data-link system and lay a foundation for predicting the health status of a UAV data-link system accurately., Competing Interests: The authors declare no conflict of interest.

Background: The body area networks (BAN) are built by many wearable sensors to record, monitor or control the vital signals within the human body continuously. Human body communication (HBC) is a novel physical layer method to implement the BAN with low power consumption, low radiation, and strong anti-interference. However, the most existing HBC rarely consider the situation in which multiple sensors transmit data at the same time., Objective: The aim of this paper is to investigate the feasibility of frequency division multiplexing for human body communication multiplex data transmission., Methods: The signal was injected into the human body, and the human channel gain was measured by the spectrum analyzer. Two frequency signals were selected with smaller gain to design the transceiver. The transmitter used OOK modulation technology to design each functional unit, and the receiver recovered the original signal with a non-coherent demodulation method., Results: The experimental results show that after the dual signals were transmitted through the human body, the receiver could recover the original signal correctly. In both static and dynamic situations, even if the transmission rate was as high as 115.2 kb/s, the bit error rate was only 10-4., Conclusions: The frequency division multiplexing scheme can be selected for multi-channel data transmission in human body communication.

Wireless sensor networks (WSNs) will play a fundamental role in the realization of Internet of Things and Industry 4.0. Arising from the presence of spatially distributed sensor nodes in a sensor network, cooperative diversity can be achieved by using the sensor nodes between a given source-destination pair as intermediate relay stations. In this paper, we investigate the end-to-end average bit error rate (BER) and the channel capacity of a multi-hop relay network in the presence of impulsive noise modeled by the well-known Middleton's class-A model. Specifically, we consider a multi-hop decode-and-forward (DF) relay network over Nakagami- m fading channel due to its generality, but also due to the absence of reported works in this area. Closed-form analytical expressions for the end-to-end average BER and the statistical properties of the end-to-end channel capacity are obtained. The impacts of the channel parameters on these performance quantities are evaluated and discussed.

Background: High order modulation and demodulation technology can solve the frequency requirement between the wireless energy transmission and data communication. In order to achieve reliable wireless data communication based on high order modulation technology for visual prosthesis, this work proposed a Reed-Solomon (RS) error correcting code (ECC) circuit on the basis of differential amplitude and phase shift keying (DAPSK) soft demodulation. Firstly, recognizing the weakness of the traditional DAPSK soft demodulation algorithm based on division that is complex for hardware implementation, an improved phase soft demodulation algorithm for visual prosthesis to reduce the hardware complexity is put forward. Based on this new algorithm, an improved RS soft decoding method is hence proposed. In this new decoding method, the combination of Chase algorithm and hard decoding algorithms is used to achieve soft decoding. In order to meet the requirements of implantable visual prosthesis, the method to calculate reliability of symbol-level based on multiplication of bit reliability is derived, which reduces the testing vectors number of Chase algorithm. The proposed algorithms are verified by MATLAB simulation and FPGA experimental results. During MATLAB simulation, the biological channel attenuation property model is added into the ECC circuit., Results: The data rate is 8 Mbps in the MATLAB simulation and FPGA experiments. MATLAB simulation results show that the improved phase soft demodulation algorithm proposed in this paper saves hardware resources without losing bit error rate (BER) performance. Compared with the traditional demodulation circuit, the coding gain of the ECC circuit has been improved by about 3 dB under the same BER of [Formula: see text]. The FPGA experimental results show that under the condition of data demodulation error with wireless coils 3 cm away, the system can correct it. The greater the distance, the higher the BER. Then we use a bit error rate analyzer to measure BER of the demodulation circuit and the RS ECC circuit with different distance of two coils. And the experimental results show that the RS ECC circuit has about an order of magnitude lower BER than the demodulation circuit when under the same coils distance. Therefore, the RS ECC circuit has more higher reliability of the communication in the system., Conclusions: The improved phase soft demodulation algorithm and soft decoding algorithm proposed in this paper enables data communication that is more reliable than other demodulation system, which also provide a significant reference for further study to the visual prosthesis system.

Prior research studies have shown that the peak signal to noise ratio (PSNR) is the most frequent watermarked image quality metric that is used for determining the levels of strength and weakness of watermarking algorithms. Conversely, normalised cross correlation (NCC) is the most common metric used after attacks were applied to a watermarked image to verify the strength of the algorithm used. Many researchers have used these approaches to evaluate their algorithms. These strategies have been used for a long time, however, which unfortunately limits the value of PSNR and NCC in reflecting the strength and weakness of the watermarking algorithms. This paper considers this issue to determine the threshold values of these two parameters in reflecting the amount of strength and weakness of the watermarking algorithms. We used our novel watermarking technique for embedding four watermarks in intermediate significant bits (ISB) of six image files one-by-one through replacing the image pixels with new pixels and, at the same time, keeping the new pixels very close to the original pixels. This approach gains an improved robustness based on the PSNR and NCC values that were gathered. A neural network model was built that uses the image quality metrics (PSNR and NCC) values obtained from the watermarking of six grey-scale images that use ISB as the desired output and that are trained for each watermarked image's PSNR and NCC. The neural network predicts the watermarked image's PSNR together with NCC after the attacks when a portion of the output of the same or different types of image quality metrics (PSNR and NCC) are obtained. The results indicate that the NCC metric fluctuates before the PSNR values deteriorate.

Background: Intra-Body Communication (IBC), which utilizes the human body as the transmission medium to transmit signal, is a potential communication technique for the physiological data transfer among the sensors of remote healthcare monitoring system, in which the doctors are permitted to remotely access the healthcare data without interrupt to the patients' daily activities., Methods: This work investigates the effects of human limb gestures including various joint angles, hand gripping force and loading on galvanic coupling IBC channel. The experiment results show that channel gain is significantly influenced by the joint angle (i.e. gain variation 1.09-11.70 dB, p < 0.014). The extension, as well as the appearance of joint in IBC channel increases the channel attenuation. While the other gestures and muscle fatigue have negligible effect (gain variation <0.77 dB, p > 0.793) on IBC channel. Moreover, the change of joint angle on human limb IBC channel causes significant variation in bit error rate (BER) performance., Conclusions: The results reveal the dynamic behavior of galvanic coupling IBC channel, and provide suggestions for practical IBC system design.