Search

We assembled photoresponsive mono- and bilayer systems with well-defined properties from rod-shaped molecules equipped with different photoswitches. Using properly chosen chromophores (diarylethene-based switch and unidirectional light-driven molecular motor), we then selectively targeted layers made of the same types of photoswitches using appropriate monochromatic light. UV-vis analysis confirmed smooth and unrestricted photoisomerization. To achieve this, we synthesized a new class of triptycene-based molecular pedestals adept at forming sturdy Langmuir-Blodgett films on a water-air interface. The films were smoothly transferred to gold and quartz surfaces. Repeated deposition afforded bilayer systems: one layer containing diarylethene-based photoswitches and the other a unidirectional light-driven molecular motor. Structural analysis of both mono- and bilayer systems revealed the molecules to be tilted with carboxylic functions pointing to the surface. At least two different polymorphs differing in monolayer thickness and tilt angle (~40° and ~60°) were identified on the gold surface., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

In this work, we investigated cyclohexane oxidative dehydrogenation (ODH) catalyzed by cobalt ferrite nanoparticles supported on reduced graphene oxide (RGO). We aim to identify the active sites that are specifically responsible for full and partial dehydrogenation using advanced spectroscopic techniques such as X-ray photoelectron emission microscopy (XPEEM) and X-ray photoelectron spectroscopy (XPS) along with kinetic analysis. Spectroscopically, we propose that Fe 3+ /T d sites could exclusively produce benzene through full cyclohexane dehydrogenation, while kinetic analysis shows that oxygen-derived species (O*) are responsible for partial dehydrogenation to form cyclohexene in a single catalytic sojourn. We unravel the dynamic cooperativity between octahedral and tetrahedral sites and the unique role of the support in masking undesired active (Fe 3+ /T d ) sites. This phenomenon was strategically used to control the abundance of these species on the catalyst surface by varying the particle size and the wt % content of the nanoparticles on the RGO support in order to control the reaction selectivity without compromising reaction rates which are otherwise extremely challenging due to the much favorable thermodynamics for complete dehydrogenation and complete combustion under oxidative conditions., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Metal-organic frameworks (MOFs) represent a class of porous materials whose properties can be altered by doping with redox-active molecules. Despite advanced properties such as enhanced electrical conduction that doped MOFs exhibit, understanding physical mechanisms remains challenging because of their heterogeneous nature hindering experimental observations of host-guest interactions. Here, we show a study of charge transfer between Mn-MOF-74 and electron acceptors, 7,7,8,8-tetracyanoquinodimethane (TCNQ) and XeF 2 , employing selective enhancement of Raman scattering of different moieties under various optical-resonance conditions. We identify Raman modes of molecular components and elucidate that TCNQ gets oxidized into dicyano- p -toluoyl cyanide (DCTC - ) while XeF 2 fluorinates the MOF upon infiltration. The framework's linker in both cases acts as an electron donor as deduced from blue shifts of the C-O stretching mode accompanied by the emergence of a quinone-like mode. This work demonstrates a generally applicable methodology for investigating charge transfer in various donor-acceptor systems by means of resonance Raman spectroscopy., Competing Interests: The authors declare no competing financial interest., (© 2020 American Chemical Society.)

Spatially resolved functionalization of 2D materials is highly demanded but very challenging to achieve. The chemical patterning is typically tackled by preventing contact between the reagent and material, which brings various accompanying challenges. Photochemical transformation on the other hand inherently provides remote high spatiotemporal resolution using the cleanest reagent-a photon. Herein, we combine two competing reactions on a graphene substrate to create functionalization patterns on a micrometer scale via the Mitsunobu reaction. The mild reaction conditions allow introduction of covalently dynamic linkages, which can serve as reversible labels for surface- or graphene-enhanced Raman spectroscopy characterization of the patterns prepared. The proposed methodology thus provides a pathway for local introduction of arbitrary functional groups on graphene., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Graphene is a material of unmatched properties and eminent potential in disciplines ranging from physics, to chemistry, to biology. Its advancement to applications with a specific function requires rational design and fine tuning of its properties, and covalent introduction of various substituents answers this requirement. We challenged the obstacle of non-trivial and harsh procedures for covalent functionalization of pristine graphene and developed a protocol for mild nucleophilic introduction of organic groups in the gas phase. The painstaking analysis problem of monolayered materials was addressed by using surface-enhanced Raman spectroscopy, which allowed us to monitor and characterize in detail the surface composition. These deliverables provide a toolbox for reactivity of fluorinated graphene under mild reaction conditions, providing structural freedom of the species to-be-grafted to the single-layer graphene., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Hoveyda-Grubbs type catalysts with cationic tags on NHC ligands were linker-free immobilized on the surface of lamellar zeolitic supports (MCM-22, MCM-56, MCM-36) and on mesoporous molecular sieves SBA-15. The activity of prepared hybrid catalysts was tested in olefin metathesis reactions: the activity in ring-closing metathesis of citronellene and N,N-diallyltrifluoroacetamide decreased in the order of support MCM-22 ≈ MCM-56 > SBA-15 > MCM-36; the hybrid catalyst based on SBA-15 was found the most active in self-metathesis of methyl oleate. All catalysts were reusable and exhibited low Ru leaching (<1% of Ru content). XPS analysis revealed that during immobilization ion exchange between Hoveyda-Grubbs type catalyst and zeolitic support occurred in the case of Cl(-) counter anion; in contrast, PF6 (-) counter anion underwent partial decomposition.

Treatment of cleaned gold surfaces with dilute tetrahydrofuran or chloroform solutions of tetraalkylstannanes (alkyl = methyl, ethyl, n-propyl, n-butyl) or di-n-butylmethylstannyl tosylate under ambient conditions causes a self-limited growth of disordered monolayers consisting of alkyls and tin oxide. Extensive use of deuterium labeling showed that the alkyls originate from the stannane and not from ambient impurities, and that trialkylstannyl groups are absent in the monolayers, contrary to previous proposals. Methyl groups attached to the Sn atom are not transferred to the surface. Ethyl groups are transferred slowly, and propyl and butyl rapidly. In all cases, tin oxide is codeposited in submonolayer amounts. The monolayers were characterized by ellipsometry, contact angle goniometry, polarization modulated IR reflection absorption spectroscopy, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy with ferrocyanide/ferricyanide, which revealed a very low charge-transfer resistance. The thermal stability of the monolayers and their resistance to solvents are comparable with those of an n-octadecanethiol monolayer. A preliminary examination of the kinetics of monolayer deposition from a THF solution of tetra-n-butylstannane revealed an approximately half-order dependence on the bulk solution concentration of the stannane, hinting that more than one alkyl can be transferred from a single stannane molecule. A detailed structure of the attachment of the alkyl groups is not known, and it is proposed that it involves direct single or multiple bonding of one or more C atoms to one or more Au atoms.

Fluorination of graphene opens up a bandgap, which creates opportunities for optoelectronics, and also paves the way for the creation of extremely thin insulating layers, which can be important for applications in devices. However, in spite of many interesting features offered by, for example, unequally doped layers in multilayered systems, most of the work has concerned the fluorination of graphene monolayers. Here, the fluorination process of graphene bilayers is investigated through high-resolution Raman mapping followed by analysis of more than 10,000 spectra of bilayer graphene. Isotopically labeled bilayers are used, allowing each individual layer in bilayer graphene to be addressed unambiguously. The fluorinated graphene is prepared through exposure to XeF2. Monolayer graphene is found to be significantly more sensitive to fluorination than bilayer graphene. Through comparison of the D/G area ratio and the position of the G band for turbostratic and Bernal stacked (AB) bilayers, it is found that the fluorination process is more effective for turbostratic than for AB-stacked bilayer graphene. The fluorination changes the electronic structure similarly for the top and bottom layers in turbostratic bilayers. However, the top layer is more sensitive than the bottom layer in AB-stacked bilayers., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Interactions of gaseous (ambient) nanobubbles (10-100 nm diameter) with different hydrophobic materials-Teflon, polystyrene, paraffin, and basal plane highly ordered pyrolytic graphite (HOPG)-are studied by AFM in situ and ex situ. Exactly identical surface locations are examined before and after exposure to ambient gas nanobubbles in deionized water and compared for nanomorphological changes. While freely flooded/immersed surfaces, regularly occupied by nanobubbles, do not exhibit resolvable alterations, significant surface rearrangement is found on whole flooded area after mild pressure drop (10 kPa) applied on the solid-liquid interface. Nanopattern and its characteristic dimension appear to be material specific and solely reflect surface-nanobubble interaction. Mild, nonswelling, noncorrosive conditions (20 °C, deionized water) prevent intervention of chemical reaction and high-energy-demanding processes. Experimental results, in accordance with the presented model, indicate that the mild pressure drop triggers expansion of pinned nanobubbles, imposing local tensile stress on the solid surface. Consequently, nanobubbles should be considered as large-area nanoscale patterning elements.

Two different positional isomers of 1,2-dicarba-closo-dodecaboranedithiols, 1,2-(HS)(2)-1,2-C(2)B(10)H(10) (1) and 9,12-(HS)(2)-1,2-C(2)B(10)H(10) (2), have been investigated as cluster building blocks for self-assembled monolayers (SAMs) on copper surfaces. These two isomers represent a convenient system in which the attachment of SH groups at different positions on the skeleton affects their acidic character and thus also determines their reactivity with a copper surface. Isomer 1 exhibited etching of polycrystalline Cu films, and a detailed investigation of the experimental conditions showed that both the acidic character of SH groups and the presence of oxygen at the copper surface play crucial roles in how the surface reaction proceeds: whether toward a self-assembled monolayer or toward copper film etching. We found that each positional isomer requires completely different conditions for the preparation of a SAM on copper surfaces. Optimized conditions for the former isomer required the exposure of a freshly prepared Cu surface to vapor of 1 in vacuum, which avoided the presence of oxygen and moisture. Adsorption from a dichloromethane solution afforded a sparsely covered Cu(0) surface; isomer 1 effectively removes the surface copper(I) oxide, forming a soluble product, but apparently binds only weakly to the clean Cu(0) surface. In contrast, adsorption of the latter, less volatile isomer proceeded better from a dichloromethane solution than from the vapor phase. Isomer 2 was even able to densely cover the copper surface cleaned up by the dichloromethane solution of 1. Both isomers exhibited high capacity to remove oxygen atoms from the surface copper(I) oxide that forms immediately after the exposure of freshly prepared copper films to ambient atmosphere. Isomer 2 showed suppression of Cu film oxidation. A number of methods including X-ray photoelectron spectroscopy (XPS), X-ray Rutherford back scattering (RBS), proton-induced X-ray emission (PIXE) analysis, atomic force microscopy (AFM), cyclic voltammetry, and contact angle measurements were used to investigate the experimental conditions for the preparation of SAMs of both positional isomers on copper surfaces and to shed light on the interaction between these molecules and a polycrystalline copper surface.

IR laser-induced gas-phase photolysis of Fe(CO)(5)-SiH(4) mixtures occurs as SiH(4)-photosensitized decomposition of Fe(CO)(5) is accelerated by products of this decomposition and it results in deposition of amorphous Si/Fe nanocomposite films. Analyses of the deposited and subsequently annealed solid films were made by FTIR, Raman and X-ray photoelectron spectroscopy, X-ray diffraction and electron microscopy. The deposited films are amorphous, contain crystalline nanostructures of iron silicide FeSi(2) and undergo atmospheric oxidation in topmost layers to iron oxide and hydrogenated silicon oxide. Upon annealing they develop nanocrystalline structures of ferrisilicate, Fe(1.6)SiO(4), carbon-encaged iron disilicide, FeSi(2), and very rare hexagonal (high-pressure) Fe surviving at ambient conditions. The mechanism of formation of these nanostructures is discussed in terms of gas-phase and solid-phase reactions.

Three nido-decaborane thiol cluster compounds, [1-(HS)-nido-B(10)H(13)] 1, [2-(HS)-nido-B(10)H(13)] 2, and [1,2-(HS)(2)-nido-B(10)H(12)] 3 have been characterized using NMR spectroscopy, single-crystal X-ray diffraction analysis, and quantum-chemical calculations. In the solid state, 1, 2, and 3 feature weak intermolecular hydrogen bonding between the sulfur atom and the relatively positive bridging hydrogen atoms on the open face of an adjacent cluster. Density functional theory (DFT) calculations show that the value of the interaction energy is approximately proportional to the number of hydrogen atoms involved in the interaction and that these values are consistent with a related bridging-hydrogen atom interaction calculated for a B(18)H(22)·C(6)H(6) solvate. Self-assembled monolayers (SAMs) of 1, 2, and 3 on gold and silver surfaces have been prepared and characterized using X-ray photoelectron spectroscopy. The variations in the measured sulfur binding energies, as thiolates on the surface, correlate with the (CC2) calculated atomic charge for the relevant boron vertices and for the associated sulfur substituents for the parent B(10)H(13)(SH) compounds. The calculated charges also correlate with the measured and DFT-calculated thiol (1)H chemical shifts. Wetting-angle measurements indicate that the hydrophilic open face of the cluster is directed upward from the substrate surface, allowing the bridging hydrogen atoms to exhibit a similar reactivity to that of the bulk compound. Thus, [PtMe(2)(PMe(2)Ph)(2)] reacts with the exposed and acidic B-H-B bridging hydrogen atoms of a SAM of 1 on a gold substrate, affording the addition of the metal moiety to the cluster. The XPS-derived stoichiometry is very similar to that for a SAM produced directly from the adsorption of [1-(HS)-7,7-(PMe(2)Ph)(2)-nido-7-PtB(10)H(11)] 4. The use of reactive boron hydride SAMs as templates on which further chemistry may be carried out is unprecedented, and the principle may be extended to other binary boron hydride clusters.

Zeoadsorbents on the basis of copper forms of synthetic zeolite ZSM5 and natural zeolite of the clinoptilolite type (CT) have been studied taking into account their environmental application in removing harmful pyridine (py) from liquid and gas phase. Sorption of pyridine by copper forms of zeolites (Cu-ZSM5 and Cu-CT) has been studied by CHN, X-ray photoelectron spectroscopy, X-ray powder diffractometry, FTIR spectroscopy, thermal analysis (TG, DTA and DTG) and analysis of the surface areas and the pore volumes by low-temperature adsorption of nitrogen. The results of thermal analyses of Cu-ZSM5, Cu-(py)(x)ZSM5, Cu-CT and Cu-(py)(x)CT zeolitic products with different composition (x depends on the experimental conditions of sorption of pyridine) clearly confirmed their different thermal properties as well as the sorption of pyridine. In the zeolitic pyridine containing samples the main part of the pyridine release process occurs at considerably higher temperatures than is the boiling point of pyridine, which proves strong bond and irreversibility of py-zeolite interaction. FTIR spectra of Cu-(py)(x)zeolite samples showed well resolved bands of pyridine. The results of thermal analysis and FTIR spectroscopy are in a good agreement with the results of other used methods., (Copyright © 2010 Elsevier B.V. All rights reserved.)

A commercially available Hoveyda-Grubbs type catalyst (RC303 Zhannan Pharma) was immobilized on mesoporous molecular sieves MCM-41 and on SBA-15 by direct interaction with the sieve wall surface. The immobilized catalysts exhibited high activity and nearly 100% selectivity in several types of alkene metathesis reactions. Ru leaching was found to depend on the substrate and solvent used (the lowest leaching was found for ring-closing metathesis of 1,7-octadiene in cyclohexane - 0.04% of catalyst Ru content). Results of XPS, UV-vis and NMR spectroscopy showed that at least 76% of the Ru content was bound to the support surface non-covalently and could be removed from the catalyst by washing with THF.

Ambient gas nanobubbles of size approximately 10(1)-10(2) nm occupying the hydrophobic surface of basal plane highly ordered pyrolytic graphite (HOPG) immersed in aqueous media at room temperature cause exfoliation of the top graphene layers, as revealed by both in situ and ex situ atomic force microscope (AFM) imaging. The formation of nanoparticles composed mostly from graphene-based nanoscrolls, nanohorn-like and onion-like nanostructures was resolved by high resolution transmission electron microscopy (TEM) and examined by diffraction and x-ray photoelectron spectroscopy (XPS) analyses. The diameter of nanostructures varied from about 5 nm for single-layered scrolls to tens of nanometres for multishells. Raman spectroscopy confirmed the structural rearrangement of the HOPG basal plane after the above-mentioned treatment. The implications for nanobubble interfacial forces are discussed.

Materials on the basis of cycloolefin copolymers (COC) are suitable for subchondral defect repairs. The objective of this study was to evaluate the influence of surface modification of COC and COC/LLDPE blends on the viability and gene expression of chondrocytes. Human chondrocytes were incubated on the surface of the studied materials. Half of the materials were plasmatically modified with a subsequent type II collagen application. The gene expression of matrix metalloproteinases (MMP-1,-3,-13), pro-inflammatory cytokines (IL-1, TNF-alpha) and apoptotic molecules (BAX, Bcl-2) was evaluated using quantitative Taq-Man PCR after 48 h incubation. Chondrocyte viability was evaluated by the MTT test after 2, 4 and 8 days of incubation. The synthesis of MMPs was measured by ELISA assay in cell culture medium after 48 h of incubation. Chondrocytes incubated on plasmatically modified in contrast to unmodified materials demonstrated significantly increased gene expression of IL-1 (p<0.05), MMP-1 and MMP-3 (p<0.05 for both comparisons) as well as MMP-13 (p<0.001). Increased gene expression was confirmed by significantly increased production of active forms of particular MMPs into the cell culture medium. Unlike surface unmodified polymers, the modified materials showed time-dependent reduction of chondrocyte viability. The gene expression of TNF-alpha and apoptotic molecules by chondrocytes was not significantly changed by different materials. Cycloolefin copolymers and their blends may represent suitable materials for tissue engineering, however, their surface modification followed by collagen type II application may, at least under in vitro conditions, reduce the viability of chondrocytes and induce their pro-destructive behavior. The potential benefit or disadvantage of surface modifications of materials for osteochondral defect repairs needs to be further elucidated.

The degeneration of articular cartilage results from osteoarthritis and many other forms of severe arthritis. Current treatments for cartilage repair are less than satisfactory, and rarely restore a full function or return the tissue to its natural state. The leading strategies in the treatment are aimed at the transplantation of cells and/or the use of various biological grafts, bioactive agents, or biologically compatible implant matrices. The insertion of a crushed autologous bone graft has been reported as a possible therapy. However, the regenerative quality of the tissue was less than 70% of healthy cartilage for fragments and controls. The implantation of cycloolefin-blend 3D-cylinders with hydrogel scaffolds on their proximal parts and with the applications of type I collagen films is one of several surgical therapies. The replacement and continuous biomechanical properties of the subchondral bone play an important role in the morphology and the quality of chondrogenesis. The initial biomechanical stability of COC-blend polymer replacements in the subchondral bone contributes to the formation of a new cartilage tissue. The initial bearing capacities of the implanted tissue/replacements and vertical positions of the replacements have a principal influence upon both the quality and the quantity of new articular cartilage.

Silanization of macroporous glass microfiber filters with (3-aminopropyl)triethoxysilane (APTES) and subsequent binding of [2-(3,4-epoxycyclohexyl)ethyl]heptaisobutyloctasilsesquioxane (E-POSS) to the amine-terminated surface of microfibers was studied. Prior to the silanization, minute quantities of concentrated aqueous solutions of hydrochloric acid or ammonia were adsorbed in the filters while attachment of E-POSS molecules to APTES overlay was not specially catalyzed. Analysis of DRIFT, XPS, and 13C CP/MAS NMR spectra has shown that the formation of APTES overlay is affected differently by the surface-deposited acid or base. It was proved by XPS that microfibers with the adsorbed acid take up higher amounts of covalently attached APTES by 42% and, subsequently, of E-POSS by 65% than microfibers with the adsorbed ammonia. The molecular mechanics model calculations, which were made using silica as a template, have shown that approximately two-layered APTES coating can be built on the model surface if complete hydrolysis of ethoxy groups and vertical condensation of APTES species are assumed.

Four different carboranethiol derivatives were used to modify the surfaces of gold nanoparticles and flat gold films. The novel materials engendered from these modifications are extraordinarily stable species with surfaces that support self-assembled monolayers of 1-(HS)-1,2-C2B10H11, 1,2-(HS)2-1,2-C2B10H10, 1,12-(HS)2-1,12-C2B10H10, and 9,12-(HS)2-1,2-C2B10H10, respectively. Surprisingly, characterization of these materials revealed that a number of molecules of the carboranethiol derivatives are incorporated inside the nanoparticles. This structural feature was studied using a number of techniques, including X-ray photoelectron spectroscopy (XPS), UV-vis, and IR spectroscopies. Thermal desorption experiments show that carborane molecules detach and leave the nanoparticle surface mostly as 1,2-C2B10H10 isotopic clusters, leaving sulfur atoms bound to the gold surface. The surfaces of both the gold nanoparticles and the flat gold films are densely packed with carboranethiolate units. One carborane cluster molecule occupies an area of six to seven surface gold atoms of the nanoparticle and eight surface gold atoms of the flat film. XPS data showed that molecules of 1,12-(HS)2-1,12-C2B10H10 bind to the flat gold surface with only half of the thiol groups due to the steric demands of the icosahedral carborane skeleton. Electrochemical measurements indicate complete coverage of the modified gold surfaces with the carboranethiol molecules.

Layered core-shell bimetallic silver-gold nanoparticles were prepared by overdeposition of Au over Ag seeds by the seed-growth method using tetrachloroauric acid, with hydroxylamine hydrochloride as the reductant. The effects of pH, reduction rate, and seeding conditions on the morphology and surface plasmon extinction of the bimetallic nanoparticles were investigated. Nanoparticles prepared by a rapid reduction in the neutral ambient and assembled into two-dimensional nanoparticulate films by adsorption of 2,2'-bipyridine were characterized by energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy, surface-enhanced Raman scattering spectroscopy, and transmission electron microscopy. The results are consistent with Ag core and Ag/Au-alloyed shell composition of the nanoparticles. Evidence of the presence of Ag on the surface of the nanoparticles, of enrichment of the Ag/Au alloy shell by Ag toward or at the nanoparticle surface, and of modification of the nanoparticle surface by adsorbed chlorides is also provided. Reduction of the size of the Ag seeds, alloying of Ag and Au in the shell of the nanoparticles, and modification of their surfaces by adsorbed chlorides are tentatively attributed to positive charging of the nanoparticles during the electrocatalytic overdeposition of Au over Ag seeds.

Purpose of the Study: Connective tissue components, particularly collagen and proteoglycan, stimulate cell proliferation and thus promote tissue regeneration. This fact was utilized to test some new implant materials, which were covered by these components, for the speed and quality of their encapsulation., Material: The materials tested included polyethylene (PE) with either a hydrophobic (HPHO) or a hydrophilic (HPHI) surface and the C-C composite. Before implantation in experimental animals, the materials were coated with a thin layer of collagen-proteoglycan copolymer., Methods: Collagen was obtained from calf hide (ISC 40 fraction) and proteoglycan was isolated from calf cartilage with 2M GuHCl. The concentrations of elements in implant materials were assessed by the method of ESCA photoelectron spectroscopy (electron spectroscopy for chemical analysis) and, using a comparison of the values of electron binding energies at inner levels with the published ones, the chemical states of elements were identified., Results: Carbon, oxygen and silicon were identified on the surface of the PE HPHI sample; carbon, oxygen, calcium, manganese and sulfur were found on the PE HPHO sample and nitrogen, oxygen and fluorine were present on the C-C composite., Discussion: In our group of patients there was a small rate of rheumatoid arthritis, while in most literature these patients are predominant. In accordance with the outcomes of other authors, ASS is fraught with recurrence. ASS does not strike to fibrous capsule, like an open surgery synovectomy, and from these islands synovialis could regenerate., Conclusions: The presence of manganese and calcium on the surfaces of the materials investigated indicates the existence of a collagen-proteoglycan copolymer, which contains NH2 and COO groups derived from collagen and SO4 groups from proteoglycan. It is necessary to verify this theoretical assumption based on measurement data in a biological experiment.

In this work, we show atomic STM images of the layered compound Bi2Se3. We study the effect in the surface of the substitution of 5% and 20% of the Bi atoms for Sb in Bi1.9Sb0.1Se3 and Bi1.6Sb0.4Se3. The images of the three samples show similar trigonal structures corresponding probably to the van der Waals Se atoms. The distance measured between surface atoms in Bi2Se3 is 4.04 A, in Bi1.9Sb0.1Se3 is 4.16 A and in Bi1.6Sb0.4Se3 is 4.26 A. In Bi1.6Sb0.4Se3 some atomic sites appear brighter than others. The effect is accentuated at higher tunnelling currents and is not observed in the other compounds. Nanoscopic range depressions on the sample might be related to the skeletal crystal structure since the images show atomic corrugations that align slightly in one direction. We explain the results as the effects of the interactions between tip and sample, and discuss two interpretations: on the one hand, localised depression of the individual atomic sites, and on the other the possible elevation of the atoms of the surface due to a phase transition of the compounds induced by STM.

We have been able to raise squares of around 2 A in height of the layered materials Bi1.6Sb0.4Se3, Bi1.9Sb0.1Se3 and Bi2Se3 by means of contact atomic force microscopy in air. By raising squares on/beneath previously produced squares, Mayan-like pyramids have been constructed, each step of the pyramid being around 2 A in height. We neither remove matter from the surface nor produce a localized oxidation of the sample; we elevate a portion of it. When the surface is oxidized, the AFM cantilever pulls the oxide off producing holes. The raising of the squares is also possible in a nitrogen atmosphere.