Search

This prospective study explores health-related quality of life (EQ-5D-5L), event-related distress (IES-R), and depression (CES-D) after cardiac surgery during three COVID-19 lockdowns imposed in the UK. Overall, 253 patients (Lockdown 1 n = 196; 2 n = 45; 3 n = 12) completed the above-mentioned questionnaires at baseline, 1 week after discharge, and 6 weeks and 6 and 12 months after surgery. While EQ-5D-5L values were similar across all cohorts, those who underwent surgery during Lockdowns 2 and 3 had higher IES-R scores at 1 year and higher IES-R and CES-D baseline scores, respectively. Generally, increased distress, worse depression, and poorer HRQoL were observed in women. Registration ClinicalTrials.gov: NCT04366167., Competing Interests: Conflict of interest: None declared., (© The Author(s) 2023. Published by Oxford University Press on behalf of the European Society of Cardiology.)

Aims: The outbreak of COVID-19 was potentially stressful for everyone and possibly heightened in those having surgery. We sought to explore the impact of the pandemic on recovery from cardiac surgery., Methods and Results: A prospective observational study of 196 patients who were ≥18years old undergoing cardiac surgery between March 23 and July 4, 2020 (UK lockdown) was conducted. Those too unwell or unable to give consent/complete the questionnaires were excluded. Participants completed (on paper or electronically) the impact of event [Impact of Events Scale-revised (IES-R)] (distress related to COVID-19), depression [Centre for Epidemiological Studies Depression Scale (CES-D)], and EQ-5D-5L [(quality of life, health-related quality of life (HRQoL)] questionnaires at baseline, 1 week after hospital discharge, and 6 weeks, 6 months and 1 year post-surgery. Questionnaire completion was >75.0% at all timepoints, except at 1 week (67.3%). Most participants were male [147 (75.0%)], white British [156 (79.6%)] with an average age 63.4years. No patients had COVID-19. IES-R sand CES-D were above average at baseline (indicating higher levels of anxiety and depression) decreasing over time. HRQoL pre-surgery was high, reducing at 1 week but increasing to almost pre-operative levels at 6 weeks and exceeding pre-operative levels at 6 months and 1 year. IES-R and CES-D scores were consistently higher in women and younger patients with women also having poorer HRQoL up to 1-year after surgery., Conclusions: High levels of distress were observed in patients undergoing cardiac surgery during the COVID-19 pandemic with women and younger participants particularly affected. Psychological support pre- and post-operatively in further crises or traumatic times should be considered to aid recovery., Registration: Clinicaltrials.gov ID:NCT04366167., Competing Interests: Conflict of interest: None declared., (© The Author(s) 2022. Published by Oxford University Press on behalf of the European Society of Cardiology.)

The release of glucose from lignocellulosic waste for subsequent fermentation into biofuels holds promise for securing humankind's future energy needs. The discovery of a set of copper-dependent enzymes known as lytic polysaccharide monooxygenases (LPMOs) has galvanised new research in this area. LPMOs act by oxidatively introducing chain breaks into cellulose and other polysaccharides, boosting the ability of cellulases to act on the substrate. Although several proteins have been implicated as electron sources in fungal LPMO biochemistry, no equivalent bacterial LPMO electron donors have been previously identified, although the proteins Cbp2D and E from Cellvibrio japonicus have been implicated as potential candidates. Here we analyse a small c-type cytochrome (CjX183) present in Cellvibrio japonicus Cbp2D, and show that it can initiate bacterial CuII/I LPMO reduction and also activate LPMO-catalyzed cellulose-degradation. In the absence of cellulose, CjX183-driven reduction of the LPMO results in less H2O2 production from O2, and correspondingly less oxidative damage to the enzyme than when ascorbate is used as the reducing agent. Significantly, using CjX183 as the activator maintained similar cellulase boosting levels relative to the use of an equivalent amount of ascorbate. Our results therefore add further evidence to the impact that the choice of electron source can have on LPMO action. Furthermore, the study of Cbp2D and other similar proteins may yet reveal new insight into the redox processes governing polysaccharide degradation in bacteria., (© 2021 The Author(s).)

Cabled observatories are marine infrastructures equipped with biogeochemical and oceanographic sensors as well as High-Definition video and audio equipment, hence providing unprecedented opportunities to study marine biotic and abiotic components. Additionally, non-invasive monitoring approaches such as environmental DNA (eDNA) metabarcoding have further enhanced the ability to characterize marine life. Although the use of non-invasive tools beholds great potential for the sustainable monitoring of biodiversity and declining natural resources, such techniques are rarely used in parallel and understanding their limitations is challenging. Thus, this study combined Underwater Video (UV) with eDNA metabarcoding data to produce marine fish community profiles over a 2 months period in situ at a cabled observatory in the northeast Atlantic (SmartBay Ireland). By combining both approaches, an increased number of fish could be identified to the species level (total of 22 species), including ecologically and economically important species such as Atlantic cod, whiting, mackerel and monkfish. The eDNA approach alone successfully identified a higher number of species (59%) compared to the UV approach (18%), whereby 23% of species were detected by both methods. The parallel implementation of point collection eDNA and time series UV data not only confirmed expectations of the corroborative effect of using multiple disciplines in fish community composition, but also enabled the assessment of limitations intrinsic to each technique including the identification of false-negative detections in one sampling technology relative to the other. This work showcased the usefulness of cabled observatories as key platforms for in situ empirical assessment of both challenges and prospects of novel technologies in aid to future monitoring of marine life., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Indanomycin is biosynthesized by a hybrid nonribosomal peptide synthase/polyketide synthase (NRPS/PKS) followed by a number of 'tailoring' steps to form the two ring systems that are present in the mature product. It had previously been hypothesized that the indane ring of indanomycin was formed by the action of IdmH using a Diels-Alder reaction. Here, the crystal structure of a selenomethionine-labelled truncated form of IdmH (IdmH-Δ99-107) was solved using single-wavelength anomalous dispersion (SAD) phasing. This truncated variant allows consistent and easy crystallization, but importantly the structure was used as a search model in molecular replacement, allowing the full-length IdmH structure to be determined to 2.7 Å resolution. IdmH is a homodimer, with the individual protomers consisting of an α+β barrel. Each protomer contains a deep hydrophobic pocket which is proposed to constitute the active site of the enzyme. To investigate the reaction catalysed by IdmH, 88% of the backbone NMR resonances were assigned, and using chemical shift perturbation of [ 15 N]-labelled IdmH it was demonstrated that indanomycin binds in the active-site pocket. Finally, combined quantum mechanical/molecular mechanical (QM/MM) modelling of the IdmH reaction shows that the active site of the enzyme provides an appropriate environment to promote indane-ring formation, supporting the assignment of IdmH as the key Diels-Alderase catalysing the final step in the biosynthesis of indanomycin through a similar mechanism to other recently characterized Diels-Alderases involved in polyketide-tailoring reactions. An animated Interactive 3D Complement (I3DC) is available in Proteopedia at https://proteopedia.org/w/Journal:IUCrJ:S2052252519012399., (© Ieva Drulyte et al. 2019.)

The development of 'designer' organelles could be a key strategy to enable foreign pathways to be efficiently controlled within eukaryotic biotechnology. A fundamental component of any such system will be the implementation of a bespoke protein import pathway that can selectively deliver constituent proteins to the new compartment in the presence of existing endogenous trafficking systems. Here we show that the protein-protein interactions that control the peroxisomal protein import pathway can be manipulated to create a pair of interacting partners that still support protein import in moss cells, but are orthogonal to the naturally occurring pathways. In addition to providing a valuable experimental tool to give new insights into peroxisomal protein import, the variant receptor-signal sequence pair forms the basis of a system in which normal peroxisomal function is downregulated and replaced with an alternative pathway, an essential first step in the creation of a designer organelle.Designer organelles could allow the isolation of synthetic biological pathways from endogenous components of the host cell. Here the authors engineer a peroxisomal protein import pathway orthogonal to the naturally occurring system.

The introduction of fluorine has been widely exploited to tune the biological functions of small molecules. Indeed, around 20% of leading drugs contain at least one fluorine atom. Yet, despite profound effects of fluorination on conformation, there is only a limited toolkit of reactions that enable stereoselective synthesis of fluorinated compounds. Aldolases are useful catalysts for the stereoselective synthesis of bioactive small molecules; however, despite fluoropyruvate being a viable nucleophile for some aldolases, the potential of aldolases to control the formation of fluorine-bearing stereocentres has largely been untapped. Very recently, it has been shown that aldolase-catalysed stereoselective carboncarbon bond formation with fluoropyruvate as nucleophile enable the synthesis of many α-fluoro β-hydroxy carboxyl derivatives. Furthermore, an understanding of the structural basis for the stereocontrol observed in these reactions is beginning to emerge. Here, we review the application of aldolase catalysis in the stereocontrolled synthesis of chiral fluorinated small molecules, and highlight likely areas for future developments., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Natural enzymes are constructed from the 20 proteogenic amino acids, which may then require posttranslational modification or the recruitment of coenzymes or metal ions to achieve catalytic function. Here, we demonstrate that expansion of the alphabet of amino acids can also enable the properties of enzymes to be extended. A chemical mutagenesis strategy allowed a wide range of noncanonical amino acids to be systematically incorporated throughout an active site to alter enzymic substrate specificity. Specifically, 13 different noncanonical side chains were incorporated at 12 different positions within the active site of N -acetylneuraminic acid lyase (NAL), and the resulting chemically modified enzymes were screened for activity with a range of aldehyde substrates. A modified enzyme containing a 2,3-dihydroxypropyl cysteine at position 190 was identified that had significantly increased activity for the aldol reaction of erythrose with pyruvate compared with the wild-type enzyme. Kinetic investigation of a saturation library of the canonical amino acids at the same position showed that this increased activity was not achievable with any of the 20 proteogenic amino acids. Structural and modeling studies revealed that the unique shape and functionality of the noncanonical side chain enabled the active site to be remodeled to enable more efficient stabilization of the transition state of the reaction. The ability to exploit an expanded amino acid alphabet can thus heighten the ambitions of protein engineers wishing to develop enzymes with new catalytic properties.

The trans-o-hydroxybenzylidene pyruvate aldolase-catalysed reactions between fluoropyruvate and many (hetero)aromatic aldehydes yield aldol adducts without subsequent dehydration. Treatment of the reaction products with hydrogen peroxide yields the corresponding syn-configured α-fluoro β-hydroxy carboxylic acids which have >98 % ee. The overall chemoenzymatic approach, in which fluoropyruvate serves as a fluoroacetate equivalent, may be exploited in the synthesis of polar building blocks and fragments with potential value in drug discovery., (© 2016 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

This study investigated the application of a three-dimensional physical hydrodynamic model in a harmful algal bloom forecast system for Bantry Bay, southwest Ireland. Modelled oceanographic conditions were studied and used to help understand observed changes in the chemical and biological patterns from the national biotoxins and phytoplankton monitoring program. The study focused on two toxic events in 2013. An upwelling event was predicted by the model prior to the appearance and population increase of potentially toxic diatoms, Pseudo-nitzschia, and associated domoic acid in shellfish. A downwelling episode was provided as a forecast in the model prior to the arrival of a Dinophysis bloom and detection of its associated biotoxins in Bay shellfish. The modelled forecast products developed included expected surface, mid-depth and bottom current pathways at the mouth of the Bay and on the adjacent shelf. The rate and direction of water volume flow at the mouth and mid-bay sections were produced by the model to examine predicted upwelling and downwelling pulses. The model also calculated the evolution of water properties (temperature, salinity and density) with depth along the Bay axis and on the adjacent continental shelf. Direct measurements of water properties at a fixed point, mid-bay, were comparable to model calculations. The operational model for southwest Ireland produces a reliable 3-day physical hydrodynamic forecast of the dominant regional physical processes that result in water exchange events between Bantry Bay and its adjacent shelf. While simulated physical hydrodynamics were provided as a 3-day forecast, the upwelling and downwelling signals from the model, closely linked to toxic HAB episodes, were evident up to 10 days prior to the contamination of shellfish in the Bay., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A 3D primitive equation coastal ocean model for southwest Ireland, called the Bantry Bay model, was developed and implemented operationally. Validated model outputs have multiple uses. One of the incentives to develop the model was to explore the possible transport pathways that carry harmful algae blooms (HAB) into Bantry Bay. The model is nested offline in a regional North East Atlantic operational model. Surface forcing is taken from the half-degree Global Forecasting System, available at three-hourly intervals. Heat fluxes are calculated from the bulk formulae. Surface freshwater fluxes are obtained from the prescribed rainfall rates and the evaporation rates calculated by the model. Freshwater discharges from five rivers are included in the model. Model validation and the model skill in representing the water level, currents, temperature and salinity in the bay are reported. A scoring system based on the average adjusted relative mean absolute error for the predicted currents was used. An upgrade to a higher score was achieved through the incorporation of local winds into the surface forcing and by varying the bottom roughness coefficient. The model, designed to work in forecast mode, can replicate the main oceanographic features in the region. The model forecast is used in a decision support system for HAB alerts. An operational HAB alert system did not exist in Ireland prior to the use of this model., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The catalysis of reactions involving fluoropyruvate as donor by N-acetyl neuraminic acid lyase (NAL) variants was investigated. Under kinetic control, the wild-type enzyme catalysed the reaction between fluoropyruvate and N-acetyl mannosamine to give a 90 : 10 ratio of the (3R,4R)- and (3S,4R)-configured products; after extended reaction times, equilibration occurred to give a 30 : 70 mixture of these products. The efficiency and stereoselectivity of reactions of a range of substrates catalysed by the E192N, E192N/T167V/S208V and E192N/T167G NAL variants were also studied. Using fluoropyruvate and (2R,3S)- or (2S,3R)-2,3-dihydroxy-4-oxo-N,N-dipropylbutanamide as substrates, it was possible to obtain three of the four possible diastereomeric products; for each product, the ratio of anomeric and pyranose/furanose forms was determined. The crystal structure of S. aureus NAL in complex with fluoropyruvate was determined, assisting rationalisation of the stereochemical outcome of C-C bond formation.

N-Acetylneuraminic acid lyase (NAL) is a Class I aldolase that catalyzes the reversible condensation of pyruvate with N-acetyl-d-mannosamine (ManNAc) to yield the sialic acid N-acetylneuraminic acid (Neu5Ac). Aldolases are finding increasing use as biocatalysts for the stereospecific synthesis of complex molecules. Incomplete understanding of the mechanism of catalysis in aldolases, however, can hamper development of new enzyme activities and specificities, including control over newly generated stereocenters. In the case of NAL, it is clear that the enzyme catalyzes a Bi-Uni ordered condensation reaction in which pyruvate binds first to the enzyme to form a catalytically important Schiff base. The identity of the residues required for catalysis of the condensation step and the nature of the transition state for this reaction, however, have been a matter of conjecture. In order to address, this we crystallized a Y137A variant of the E. coli NAL in the presence of Neu5Ac. The three-dimensional structure shows a full length sialic acid bound in the active site of subunits A, B, and D, while in subunit C, discontinuous electron density reveals the positions of enzyme-bound pyruvate and ManNAc. These 'snapshot' structures, representative of intermediates in the enzyme catalytic cycle, provided an ideal starting point for QM/MM modeling of the enzymic reaction of carbon-carbon bond formation. This revealed that Tyr137 acts as the proton donor to the aldehyde oxygen of ManNAc during the reaction, the activation barrier is dominated by carbon-carbon bond formation, and proton transfer from Tyr137 is required to obtain a stable Neu5Ac-Lys165 Schiff base complex. The results also suggested that a triad of residues, Tyr137, Ser47, and Tyr110 from a neighboring subunit, are required to correctly position Tyr137 for its function, and this was confirmed by site-directed mutagenesis. This understanding of the mechanism and geometry of the transition states along the C-C bond-forming pathway will allow further development of these enzymes for stereospecific synthesis of new enzyme products.

Aldolases are seen as an attractive route to the production of biologically important compounds due to their ability to form carbon-carbon bonds. However, for many industrial reactions there are no naturally occurring enzymes, and so many different engineering approaches have been used to address this problem. Engineering methods have been used to alter the stability, substrate specificity and stereospecificity of aldolases to produce excellent enzymes for biocatalytic processes. Recently greater understanding of the aldolase mechanism has allowed many successes with both rational engineering approaches and computational design of aldolases. Rational engineering approaches have produced desired enzymes quickly and efficiently while combination of computational design with laboratory methods has created enzymes with activity approaching that of natural enzymes., (Copyright © 2013 Authors. Published by Elsevier Ltd.. All rights reserved.)

Malic acid is a C₄ dicarboxylic acid that is currently mainly used in the food and beverages industry as an acidulant. Because of the versatility of the group of C₄ dicarboxylic acids, the chemical industry has a growing interest in this chemical compound. As malic acid will be considered as a bulk chemical, microbial production requires organisms that sustain high rates, yields, and titers. Aspergillus oryzae is mainly known as an industrial enzyme producer, but it was also shown that it has a very competitive natural production capacity for malic acid. Recently, an engineered A. oryzae strain, 2103a-68, was presented which overexpressed pyruvate carboxylase, malate dehydrogenase, and a malic acid transporter. In this work, we report a detailed characterization of this strain including detailed rates and yields under malic acid production conditions. Furthermore, transcript levels of the genes of interest and corresponding enzyme activities were measured. On glucose as carbon source, 2103a-68 was able to secrete malic acid at a maximum specific production rate during stationary phase of 1.87 mmol (g dry weight (DW))⁻¹ h⁻¹ and with a yield of 1.49 mol mol⁻¹. Intracellular fluxes were obtained using ¹³C flux analysis during exponential growth, supporting the success of the metabolic engineering strategy of increasing flux through the reductive cytosolic tricarboxylic acid (rTCA) branch. Additional cultivations using xylose and a glucose/xylose mixture demonstrated that A. oryzae is able to efficiently metabolize pentoses and hexoses to produce malic acid at high titers, rates, and yields.

Malic acid has great potential for replacing petrochemical building blocks in the future. For this application, high yields, rates, and titers are essential in order to sustain a viable biotechnological production process. Natural high-capacity malic acid producers like the malic acid producer Aspergillus flavus have so far been disqualified because of special growth requirements or the production of mycotoxins. As A. oryzae is a very close relative or even an ecotype of A. flavus, it is likely that its high malic acid production capabilities with a generally regarded as safe (GRAS) status may be combined with already existing large-scale fermentation experience. In order to verify the malic acid production potential, two wild-type strains, NRRL3485 and NRRL3488, were compared in shake flasks. As NRRL3488 showed a volumetric production rate twice as high as that of NRRL3485, this strain was selected for further investigation of the influence of two different nitrogen sources on malic acid secretion. The cultivation in lab-scale fermentors resulted in a higher final titer, 30.27 ± 1.05 g liter(-1), using peptone than the one of 22.27 ± 0.46 g liter(-1) obtained when ammonium was used. Through transcriptome analysis, a binding site similar to the one of the Saccharomyces cerevisiae yeast transcription factor Msn2/4 was identified in the upstream regions of glycolytic genes and the cytosolic malic acid production pathway from pyruvate via oxaloacetate to malate, which suggests that malic acid production is a stress response. Furthermore, the pyruvate carboxylase reaction was identified as a target for metabolic engineering, after it was confirmed to be transcriptionally regulated through the correlation of intracellular fluxes and transcriptional changes.

Malic acid, a petroleum-derived C4-dicarboxylic acid that is used in the food and beverage industries, is also produced by a number of microorganisms that follow a variety of metabolic routes. Several members of the genus Aspergillus utilize a two-step cytosolic pathway from pyruvate to malate known as the reductive tricarboxylic acid (rTCA) pathway. This simple and efficient pathway has a maximum theoretical yield of 2 mol malate/mol glucose when the starting pyruvate originates from glycolysis. Production of malic acid by Aspergillus oryzae NRRL 3488 was first improved by overexpression of a native C4-dicarboxylate transporter, leading to a greater than twofold increase in the rate of malate production. Overexpression of the native cytosolic alleles of pyruvate carboxylase and malate dehydrogenase, comprising the rTCA pathway, in conjunction with the transporter resulted in an additional 27 % increase in malate production rate. A strain overexpressing all three genes achieved a malate titer of 154 g/L in 164 h, corresponding to a production rate of 0.94 g/L/h, with an associated yield on glucose of 1.38 mol/mol (69 % of the theoretical maximum). This rate of malate production is the highest reported for any microbial system.

Chemical modification has been used to introduce the unnatural amino acid γ-thialysine in place of the catalytically important Lys165 in the enzyme N-acetylneuraminic acid lyase (NAL). The Staphylococcus aureus nanA gene, encoding NAL, was cloned and expressed in E. coli. The protein, purified in high yield, has all the properties expected of a class I NAL. The S. aureus NAL which contains no natural cysteine residues was subjected to site-directed mutagenesis to introduce a cysteine in place of Lys165 in the enzyme active site. Subsequently chemical mutagenesis completely converted the cysteine into γ-thialysine through dehydroalanine (Dha) as demonstrated by ESI-MS. Initial kinetic characterisation showed that the protein containing γ-thialysine regained 17 % of the wild-type activity. To understand the reason for this lower activity, we solved X-ray crystal structures of the wild-type S. aureus NAL, both in the absence of, and in complex with, pyruvate. We also report the structures of the K165C variant, and the K165-γ-thialysine enzyme in the presence, or absence, of pyruvate. These structures reveal that γ-thialysine in NAL is an excellent structural mimic of lysine. Measurement of the pH-activity profile of the thialysine modified enzyme revealed that its pH optimum is shifted from 7.4 to 6.8. At its optimum pH, the thialysine-containing enzyme showed almost 30 % of the activity of the wild-type enzyme at its pH optimum. The lowered activity and altered pH profile of the unnatural amino acid-containing enzyme can be rationalised by imbalances of the ionisation states of residues within the active site when the pK(a) of the residue at position 165 is perturbed by replacement with γ-thialysine. The results reveal the utility of chemical mutagenesis for the modification of enzyme active sites and the exquisite sensitivity of catalysis to the local structural and electrostatic environment in NAL., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This paper describes details of an oil spill model, OILTRANS, developed by the authors. The model is an off-line particle-transport model coupled to the most up to date operational met-ocean model forecasts. Formulations for the dominant oil fate processes of spreading, advection, diffusion, evaporation, emulsification and dispersion have been encoded, providing the model with the ability to accurately predict the horizontal movement of surface oil slick, the vertical entrainment of oil into the water column and the mass balance of spilled oil. The application of the OILTRANS model to an accidental release during a ship-to-ship fuel transfer in the Celtic Sea in February 2009 is presented to validate the system. Comparisons with aerial observations of the oil slick at the time of the incident, and subsequent model simulations, indicate that the OILTRANS model is capable of accurately predicting the transport and fate of the oil slick., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

The substrate specificity of Escherichia coli N-acetylneuraminic acid lyase was previously switched from the natural condensation of pyruvate with N-acetylmannosamine, yielding N-acetylneuraminic acid, to the aldol condensation generating N-alkylcarboxamide analogues of N-acetylneuraminic acid. This was achieved by a single mutation of Glu192 to Asn. In order to analyze the structural changes involved and to more fully understand the basis of this switch in specificity, we have isolated all 20 variants of the enzyme at position 192 and determined the activities with a range of substrates. We have also determined five high-resolution crystal structures: the structures of wild-type E. coli N-acetylneuraminic acid lyase in the presence and in the absence of pyruvate, the structures of the E192N variant in the presence and in the absence of pyruvate, and the structure of the E192N variant in the presence of pyruvate and a competitive inhibitor (2R,3R)-2,3,4-trihydroxy-N,N-dipropylbutanamide. All structures were solved in space group P2(1) at resolutions ranging from 1.65 Å to 2.2 Å. A comparison of these structures, in combination with the specificity profiles of the variants, reveals subtle differences that explain the details of the specificity changes. This work demonstrates the subtleties of enzyme-substrate interactions and the importance of determining the structures of enzymes produced by directed evolution, where the specificity determinants may change from one substrate to another., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Sialylated oligosaccharides, present on mammalian outer-cell surfaces, play vital roles in cellular interactions and some bacteria are able to mimic these structures to evade their host's immune system. It would be of great benefit to the study of infectious and autoimmune diseases and cancers, to understand the pathway of sialylation in detail to enable the design and production of inhibitors and mimetics. Sialylation occurs in two stages, the first to activate sialic acid and the second to transfer it to the target molecule. The activation step is catalysed by the enzyme CMP-Neu5Ac synthetase (CNS). Here we used crystal structures of CNS and similar enzymes to predict residues of importance in the CNS from Neisseria meningitidis. Nine residues were mutated to alanine, and the steady-state enzyme kinetic parameters were measured using a continuous assay to detect one of the products of the reaction, pyrophosphate. Mutations that caused the greatest loss in activity included K142A, D211A, D209A and a series of mutations at residue Q104, highlighted from sequence-alignment studies of related enzymes, demonstrating significant roles for these residues in the catalytic mechanism of CNS. The mutations of D211A and D209A provide strong evidence for a previously proposed metal-binding site in the enzyme, and the results of our mutations at residue Q104 lead us to include this residue in the metal-binding site of an intermediate complex. This suggests that, like the sugar-activating lipopolysaccharide-synthesizing CMP-2-keto-3-deoxy-manno-octonic acid synthetase enzyme KdsB, CNS recruits two Mg(2+) ions during the catalytic cycle.

Fructose-1, 6-bisphosphate aldolases (FBA) are cytoplasmic glycolytic enzymes, which despite lacking identifiable secretion signals, have also been found localized to the surface of several bacteria where they bind host molecules and exhibit non-glycolytic functions. Neisseria meningitidis is an obligate human nasopharyngeal commensal, which has the capacity to cause life-threatening meningitis and septicemia. Recombinant native N. meningitidis FBA was purified and used in a coupled enzymic assay confirming that it has fructose bisphosphate aldolase activity. Cell fractionation experiments showed that meningococcal FBA is localized both to the cytoplasm and the outer membrane. Flow cytometry demonstrated that outer membrane-localized FBA was surface-accessible to FBA-specific antibodies. Mutational analysis and functional complementation was used to identify additional functions of FBA. An FBA-deficient mutant was not affected in its ability to grow in vitro, but showed a significant reduction in adhesion to human brain microvascular endothelial and HEp-2 cells compared to its isogenic parent and its complemented derivative. In summary, FBA is a highly conserved, surface exposed protein that is required for optimal adhesion of meningococci to human cells.

The structure of a mutant variant of Escherichia coli N-acetyl-d-neuraminic acid lyase (NAL), E192N, in complex with pyruvate has been determined in a new crystal form. It crystallized in space group P2(1)2(1)2(1), with unit-cell parameters a = 78.3, b = 108.5, c = 148.3 angstrom. Pyruvate has been trapped in the active site as a Schiff base with the catalytic lysine (Lys165) without the need for reduction. Unlike the previously published crystallization conditions for the wild-type enzyme, in which a mother-liquor-derived sulfate ion is strongly bound in the catalytic pocket, the low-salt conditions described here will facilitate the determination of further E. coli NAL structures in complex with other activesite ligands.

The implementation of the European Union Water Framework Directive (WFD) that requires all surface waters to achieve at least good status by year 2015 presents a challenge to local authorities responsible for the monitoring programmes. Obtaining a single representative value for each water quality parameter may be extremely difficult to achieve in the case of large lakes, which may be characterised by significant spatial and temporal variation of water quality parameters. The aim of this paper is to present a methodology, which can support the decision making as to the best locations for water quality sampling when developing monitoring systems of large lakes. The methodology is based on three-dimensional hydrodynamic and a conservative tracer transport numerical modelling and utilises the concept of flushing and residence time. The 3D numerical model of Lough Corrib located in the west of Ireland was created and used to calculate its residence time and flushing pathways. Based on the results it was possible to identify the areas in the lake that are characterised by the local residence time values close to the lake's average as well as by the values significantly lower and higher. Three water classes have been introduced and the authors recommend that sampling takes place in all three classes at various frequencies. Spatial distribution of the flushing pathways allows identifying the areas in the lake that best represent the lake's average conditions both in the long term and seasonally, where monitoring can be carried out at the required frequency; worst affected areas can also be identified. The methodology can be used to improve robustness of the monitoring programme and may also contribute towards the reduction of both sampling and analytical costs, both at the design and operational stages.

This review focuses on the directed evolution of aldolases with synthetically useful properties. Directed evolution has been used to address a number of limitations associated with the use of wild-type aldolases as catalysts in synthetic organic chemistry. The generation of aldolase enzymes with a modified or expanded substrate repertoire is described. Particular emphasis is placed on the directed evolution of aldolases with modified stereochemical properties: such enzymes can be useful catalysts in the stereoselective synthesis of biologically active small molecules. The review also describes some of the fundamental insights into mechanistic enzymology that directed evolution can provide.

Here we present a suite of pulse sequences for the measurement of (15)N T(1), T(1rho) and NOE data that combine traditional TROSY-based pulse sequences with band-selective Hadamard frequency encoding. The additive nature of the Hadamard matrix produces much reduced resonance overlap without the need for an increase in the dimensionality of the experiment or a significant decrease in the signal to noise ratio. We validate the accuracy of these sequences in application to ubiquitin and demonstrate their utility for relaxation measurements in Escherichia coli Class II fructose 1,6-bisphosphate aldolase (FBP-aldolase), a 358 residue 78 kDa dimeric enzyme.

Steady state and ultrafast transient absorption studies have been carried out for gold, nickel, and palladium high aspect ratio nanorods. For each metal, nanorods were fabricated by electrochemical deposition into approximately 6 microm thick polycarbonate templates. Two nominal pore diameters(10 and 30 nm, resulting in nanorod diameters of about 40 and 60 nm, respectively) were used, yielding nanorods with high aspect ratios (>25). Static spectra of nanorods of all three metals reveal both a longitudinal surface plasmon resonance (SPR(L)) band in the mid-infrared as well as a transverse band in the visible for the gold and larger diameter nickel and palladium nanorods. The appearance of SPR(L) bands in the infrared for high aspect ratio metal nanorods and the trends in their maxima for the different aspect ratios and metals are consistent with calculations based on the Gans theory. For the gold and nickel samples, time resolved studies were performed with a subpicosecond resolution using 400 nm excitation and a wide range of probe wavelengths from the visible to the mid-IR as well as for infrared excitation (near 2000 cm(-1)) probed at 800 nm. The dynamics observed for nanorods of both metals and both diameters include transients due to electron-phonon coupling and impulsively excited coherent acoustic breathing mode oscillations, which are similar to those previously reported for spherical and smaller rod-shaped gold nanoparticles. The dynamics we observe are the same within the experimental uncertainty for 400 nm and infrared (5 microm) excitation probed at 800 nm. The transient absorption using 400 nm excitation and 800 nm probe pulses of the palladium nanorods also reveal coherent acoustic oscillations. The results demonstrate that the dynamics for high aspect ratio metal nanorods are similar to those for smaller nanoparticles.

The scallop fisheries off the southeast coast of Ireland have historically been considered a valuable resource for coastal communities, and hence their management is important. The scallop fishing grounds consist of a number of scallop beds dispersed throughout the St George's Channel and the southern Irish Sea. The boundaries between stocks and the interconnection in populations of adult scallops, through larval transport, is generally unknown. Until the time of this research, the stocks of scallop in this region had not been assessed. A research project was undertaken to develop novel, spatially explicit and multi-disciplinary approaches to the assessment of the scallop fisheries in the region. The project supported research in three related areas under the broad objective of developing stock assessment protocols and methods in order to promote sustainable management of these fisheries. One of these areas was the development and application of numerical models. The objectives of this modelling research were: (a) to reconstruct the physical environment of the study area; (b) investigate how this environment affects the demographics and nature of scallop; and (c) determine migration-transport pathways of the scallop larvae. From these investigations, light is shed on how the spatial variability in certain parameters of the natural environment determine habitats and the scallop populations. Also, the investigations now enable determinations to be made on the interconnectivities of 'disparate' scallop beds and where larvae are, in general, likely to be found. Thus, through the use of complex computer models, important clues are deduced that enable us to now understand key behavioural components of scallop larvae and their transport pathways. The analysis of these clues is assisting the development of protocols for managing the fish stock in a sustainable manner.

N-Acetylneuraminic acid lyase (NAL) exhibits poor facial selectivity during carbon-carbon formation, and as such, its utility as a catalyst for use in synthetic chemistry is limited. For example, the NAL-catalyzed condensation between pyruvate and (2R,3S)-2,3-dihydroxy-4-oxo-N,N-dipropylbutyramide yields ca. 3:1 mixtures of diastereomeric products under either kinetic or thermodynamic control. Engineering the stereochemical course of NAL-catalyzed reactions could remove this limitation. We used directed evolution to create a pair of stereochemically complementary variant NALs for the synthesis of sialic acid mimetics. The E192N variant, a highly efficient catalyst for aldol reactions of (2R,3S)-2,3-dihydroxy-4-oxo-N,N-dialkylbutyramides, was chosen as a starting point. Initially, error-prone PCR identified residues in the active site of NAL that contributed to the stereochemical control of an aldolase-catalyzed reaction. Subsequently, an intense structure-guided program of saturation and site-directed mutagenesis was used to identify a complementary pair of variants, E192N/T167G and E192N/T167V/S208V, which were approximately 50-fold selective toward the cleavage of the alternative 4S- and 4R-configured condensation products, respectively. It was shown that wild-type NAL could not be used for the highly stereoselective synthesis of a 6-dipropylamide sialic acid mimetic because the 4S-configured product was only approximately 3-fold kinetically favored and only approximately 3-fold thermodynamically favored over the alternative 4R-configured product. However, the complementary 4R- and 4S-selective variants allowed the highly (>98:<2) diastereoselective synthesis of both 4S- and 4R-configured products under kinetic control from the same starting materials. Conversion of an essentially nonselective aldolase into a pair of complementary biocatalysts will be of enormous interest to synthetic chemists. Furthermore, since residues identified as critical for stereoselectivity are conserved among members of the NAL superfamily, the approach might be extended to the evolution of other useful biocatalysts for the stereoselective synthesis of biologically active molecules.

The preparation and functionalization of ITO surfaces has been studied using primarily X-ray photoemission spectroscopy and infrared reflection-absorption spectroscopy (IRRAS) and the reagents n-hexylamine and n-octyltrimethoxysilane (OTMS). Particular attention has been paid to characterization of the surfaces both before and after functionalization. Surfaces cleaned by ultraviolet (UV)/ozone treatment and subsequently exposed to room air have approximately 0.5-0.8 monolayers (ML) of adsorbed impurity C. Most is in the form of aliphatic species, but as much as one-half is partially oxidized and consists of C-OH, C-O-C, and/or >C=O groups. The coverage of these species can be reduced by cleaning in organic solvents prior to UV/ozone treatment. The OH coverage on the ITO surfaces studied here is relatively small (approximately 1.0 OH nm-2), based on the Si coverage after reaction with OTMS. A satellite feature in the O 1s XPS spectrum, often suggested to be a quantitative measure of adsorbed OH, receives a significant contribution from sources not directly related to hydroxylated ITO. n-Hexylamine adsorbs, at a saturation coverage of approximately 0.08 ML, via a Lewis acid-base interaction. The particular acid site has not been conclusively identified, but it is speculated that surface Sn sites may be involved. For OTMS, a saturation coverage of about 0.21 ML is found, and the C/Si atom ratios suggest that some displacement of preadsorbed organic impurities occurs during adsorption. The alkyl chain of adsorbed OTMS is disordered, with no preferred stereoisomer. However, the chain appears to lie mainly parallel to the surface with the plane defined by the terminal CH3-CH2-CH2- segment oriented essentially perpendicular to the surface.

Modelling heavy metals in estuarine environments is extremely complex for various reasons; one of the primary complicating factors is that metals exist in two phases, dissolved and particulate bound. Dynamic changes in water chemistry, and in particular salinity, affect the partitioning of metals between the two phases and hence make it difficult to determine the relative fractions of each phase. A relatively simple approach was developed to relate variations in partition coefficient for Ni to salinity fluctuations in the Mersey Estuary. The functional relationship developed between partition coefficient and salinity departs from the traditional exponential type curve, providing a more realistic relationship.A numerical model was then developed for predicting the transport and distribution of Ni about the Mersey Estuary. The model couples transport of metals throughout the water along with incorporating the chemical processes controlling how nickel is fractioned between dissolved and particulate phases through the newly developed partition coefficient relationship. Model predictions of dissolved Ni along the longitudinal axis of the estuary were compared with measurements of Ni for two events; very good correlation was obtained between the model results and the data.

The stereoselective synthesis of two epimeric screening substrates, (4R, 5R, 6R)- and (4S, 5R, 6R)-6-dipropylcarbamoyl-2-oxo-4,5,6-trihydroxy-hexanoic acid, for the directed evolution of sialic acid aldolase is described. The complementary methods relied on stereoselective indium-mediated additions of ethyl alpha-bromomethyl acrylate to functionalised aldehydes. With an alpha-hydroxy aldehyde, (2R, 3R)-2,3-dihydroxy-4-oxo butanoic acid dipropylamide, the addition was chelation controlled, and the syn product, (6R, 5R, 4S)-6-dipropylcarbamoyl-2-methylidene-4,5,6-trihydroxy-hexanoic acid ethyl ester, was obtained. In contrast, the stereochemical outcome of the addition to (2R, 3R)-N,N-dipropyl-2,3-O-isopropylidene-4-oxobutyramide was consistent with Felkin-Anh control, and the anti adduct, (4R, 5R, 6R)-6-dipropylcarbamoyl-2-methylidene-4-hydroxy-5,6-O-isopropylidene-hexanoic acid ethyl ester, was the major product. Ozonolysis and deprotection gave the screening substrates as mixtures of furanose and pyranose forms, in good yields.

Glucosamine and N-acetylglucosamine are currently produced by extraction and acid hydrolysis of chitin from shellfish waste. Production could be limited by the amount of raw material available and the product potentially carries the risk of shellfish protein contamination. Escherichia coli was modified by metabolic engineering to develop a fermentation process. Over-expression of glucosamine synthase (GlmS) and inactivation of catabolic genes increased glucosamine production by 15 fold, reaching 60 mg l(-1). Since GlmS is strongly inhibited by glucosamine-6-P, GlmS variants were generated via error-prone PCR and screened. Over-expression of an improved enzyme led to a glucosamine titer of 17 g l(-1). Rapid degradation of glucosamine and inhibitory effects of glucosamine and its degradation products on host cells limited further improvement. An alternative fermentation product, N-acetylglucosamine, is stable, non-inhibitory to the host and readily hydrolyzed to glucosamine under acidic conditions. Therefore, the glucosamine pathway was extended to N-acetylglucosamine by over-expressing a heterologous glucosamine-6-P N-acetyltransferase. Using a simple and low-cost fermentation process developed for this strain, over 110 g l(-1) of N-acetylglucosamine was produced.

Thermostable variants of the Class II fructose bisphosphate aldolase have been isolated following four rounds of directed evolution using DNA shuffling of the fda genes from Escherichia coli and Edwardsiella ictaluri. Variants from all four generations of evolution have been purified and characterized. The variants show increased thermostability with no loss of catalytic function at room temperature. The temperature at which 50% of the initial enzyme activity is lost after incubation for 10 min (T50) of the most stable variant, 4-43D6, is increased by 11-12 degrees C over the wild-type enzymes and the half-life of activity at 53 degrees C is increased approximately 190-fold. In addition, variant 4-43D6 shows increased stability to treatment with organic solvents. DNA sequencing of the evolved variants has identified the mutations which have been introduced and which lead to increased thermostability, and the role of the mutations introduced is discussed.

When mutant strain UV77-247 of Prototheca moriformis Kruger was fed d-[1-13C]Glc, it synthesized l-ascorbic acid (AA) with approximately three-quarters of the label at the C-1 position and the remaining label at the C-6 position, showing that AA is made by a non-inversion (retention) pathway, i.e. C-1 of Glc becomes C-1 of AA. The label present at C-6 is consistent with the glycolytic conversion of Glc to 3-carbon intermediates and subsequent gluconeogenesis. Compounds suggested as intermediates in inversion-type pathways were not converted to AA. Most strains converted Man to AA at a rate greater than they did Glc. Enzyme activities leading from Fru-6-P to the formation of GDP-Man were identified in all strains, but none of these activities correlated with the mutants' abilities to accumulate AA. However, there was a strong correlation between GDP-Man-3,5-epimerase activity and AA accumulation. Wild-type P. moriformis ATCC 75669 and mutant strains of varying AA-synthesizing abilities rapidly converted l-Gal or l-galactono-1,4-lactone to AA. Based on this data, a biosynthetic pathway from Glc to AA is proposed in which the epimerase is the rate-limiting activity in AA synthesis.

Aldolases have potential as tools for the synthesis of stereochemically complex carbohydrates. Here, we show that directed evolution can be used to alter the stereochemical course of the reaction catalyzed by tagatose-1,6-bisphosphate aldolase. After three rounds of DNA shuffling and screening, the evolved aldolase showed an 80-fold improvement in k(cat)/K(m) toward the non-natural substrate fructose 1,6-bisphosphate, resulting in a 100-fold change in stereospecificity. (31)P NMR spectroscopy was used to show that, in the synthetic direction, the evolved aldolase catalyzes the formation of carbon-carbon bonds with unnatural diastereoselectivity, where the >99:<1 preference for the formation of tagatose 1,6-bisphosphate was switched to a 4:1 preference for the diastereoisomer, fructose 1,6-bisphosphate. This demonstration is of considerable significance to synthetic chemists requiring efficient syntheses of complex stereoisomeric products, such as carbohydrate mimetics.

Previously determined crystal structures of the zinc enzyme Escherichia coli class II fructose-1,6-bisphosphate aldolase display good agreement for the protein structure but a differing metal-ion organization in the active site. The structure of the enzyme with Cd(2+) in place of Zn(2+) has now been determined to 2.0 A resolution to facilitate cation identification. The protein structure was essentially identical to other structures and five Cd(2+) positions were identified. Two of the cations are at the active site; one corresponds to the catalytic ion and the other provides a structural contribution. These Cd(2+) sites are equivalent to two Zn(2+) ions observed when the enzyme is complexed with a transition-state mimic and confirm our assignment of the roles played by these ions.

N-acetylneuraminate synthase (NeuAc-synthase; E.C. 4.1.3.19) is one of the two enzymes responsible for sialic acid (N-acetylneuraminic acid) synthesis in bacteria. Potential genes encoding NeuAc synthase in Streptococcus agalactiae and Bacillus subtilis were identified from a BLAST search of the EMBL/GenBank/DDBJ database using the E. coli neuB gene sequence as a probe and the genes cloned and expressed at high level in Escherichia coli. The neuB gene of S. agalactiae was shown to encode an active NeuAc synthase, whereas the spsE gene product from B. subtilis did not have this activity. Expression of the native S. agalactiae neuB gene product enzyme in E. coli resulted in a product that was prone to proteolysis during purification so the protein was tagged with a hexa-histidine tag at its N-terminus and the enzyme was rapidly purified to homogeneity by ammonium sulphate fractionation and Ni-chelating affinity chromatography in two steps. Measurement of the subunit molecular mass by electrospray ionisation mass spectrometry (M(r) = 38, 987 +/- 3) and of the native molecular mass by gel filtration chromatography (M(r) = 78,000) clearly demonstrated that the enzyme is dimeric. The effects of EDTA, temperature, and pH on the activity of the S. agalactiae NeuAc synthase were examined. Enzyme activity was maximal at pH 7 and was dependent on the presence of metal ions such as Mg(2+), Mn(2+) or Co(2+). The purified enzyme was inhibited by the reagent phenylglyoxal and the substrates N-acetyl mannosamine or phosphoenol pyruvate afforded protection against this inhibition, suggesting that one or more arginine residues are involved in substrate recognition and binding. The ease of expression and the properties of the enzyme should now permit a thorough study of the specificity of the enzyme and provide the prerequisites for attempts to alter this specificity by directed evolution for the production of novel sialic acid analogues., (Copyright 2002 Elsevier Science (USA))

A comprehensive taxonomic re-evaluation was performed on the marine, zeaxanthin-producing bacterium formerly classified as [Favobacterium] sp. strain R-1 512 (ATCC 21588). This strain, together with two other previously described marine isolates, [Flavobacterium] strain R-1506 and Paracoccus sp. strain MBIC 3966, were found to comprise a new species of the genus Paracoccus. The name Paracoccus zeaxanthinifaciens sp. nov. is proposed, with ATCC 21588T (= R-1512T =LMG 21293T) designated as the type strain.

The genes coding for all the enzymes involved in the conversion of acetyl-CoA to farnesyl diphosphate (FPP) in the zeaxanthin-producing bacterium Paracoccus zeaxanthinifaciens were cloned and characterized. Two genes encoding enzymes catalysing the condensation of two acetyl-CoA molecules to acetoacetyl-CoA were found. The six enzymes involved in the conversion of acetyl-CoA and acetoacetyl-CoA to isopentenyl diphosphate (IPP) and dimethylallyl diphosphate (DMAPP) are grouped in an operon, designated the mevalonate operon. The gene encoding the enzyme catalysing two consecutive condensations, IPP and DMAPP to geranyl diphosphate (GPP) and IPP and GPP to FPP, is not clustered with any other gene encoding an enzyme of the isoprenoid pathway. Genes encoding enzymes involved in the biosynthesis of poly-hydroxyalkanoate and non-carotenoid isoprenoids found in P. zeaxanthinifaciens are also presented.

Tagatose-1,6-bisphosphate aldolase (TBPA) is a tetrameric class II aldolase that catalyzes the reversible condensation of dihydroxyacetone phosphate with glyceraldehyde 3-phosphate to produce tagatose 1,6-bisphosphate. The high resolution (1.45 A) crystal structure of the Escherichia coli enzyme, encoded by the agaY gene, complexed with phosphoglycolohydroxamate (PGH) has been determined. Two subunits comprise the asymmetric unit, and a crystallographic 2-fold axis generates the functional tetramer. A complex network of hydrogen bonds position side chains in the active site that is occupied by two cations. An unusual Na+ binding site is created using a pi interaction with Tyr183 in addition to five oxygen ligands. The catalytic Zn2+ is five-coordinate using three histidine nitrogens and two PGH oxygens. Comparisons of TBPA with the related fructose-1,6-bisphosphate aldolase (FBPA) identifies common features with implications for the mechanism. Because the major product of the condensation catalyzed by the enzymes differs in the chirality at a single position, models of FBPA and TBPA with their cognate bisphosphate products provide insight into chiral discrimination by these aldolases. The TBPA active site is more open on one side than FBPA, and this contributes to a less specific enzyme. The availability of more space and a wider range of aldehyde partners used by TBPA together with the highly specific nature of FBPA suggest that TBPA might be a preferred enzyme to modify for use in biotransformation chemistry.

Cultures of the zeaxanthin-producing bacterium Paracoccus species strain PTA-3335 (formerly Flavobacterium) were grown with supplements of (13)C-labeled glucose. Zeaxanthin was isolated and analyzed by (13)C NMR spectroscopy. The data showed that the isoprenoid precursors of zeaxanthin were biosynthesized via the mevalonate pathway. The microorganism was found to utilize glucose mainly via the Entner-Doudoroff pathway.

A series of alkaline earth thiolates, M(SR)(2) (M = Ca, Sr, Ba), were synthesized from reactions between M(NH(2))(2) and RSH. For R = CMe(3), the products were only slightly soluble in pyridine, but the Ca derivative with R = 1-adamantyl was soluble, and the Ca and Sr derivatives with R = CEt(3) were very soluble in pyridine. All the R = SCMe(3) derivatives dissolved in 1-methyl-2-pyrrolidinone (NMP). One yttrium thiolate, ((Et(3)SC)(2)Y(&mgr;-SCEt(3))Py(2))(2), was also prepared and characterized by single-crystal X-ray diffraction, as was (Sr(&mgr;-SCEt(3))(2)(NH(3))Py)(n). The former crystallized as discrete dimers with planar (YS)(2) rings, and the latter formed an infinite chain of Sr atoms linked by thiolate bridges. Crystal data: ((Et(3)SC)(2)Y(&mgr;-SCEt(3))Py(2))(2) P&onemacr;, a = 11.592(1) Å, b = 17.328(2) Å, c = 18.376(2) Å, alpha = 81.617(7) degrees, beta = 79.546(5) degrees, gamma = 78.169(7) degrees, and Z = 2; (Sr(&mgr;-SCEt(3))(2)(NH(3))Py)(n) P2(1)/c, a = 9.332(2) Å, b = 20.316(2) Å, c = 13.024(1) Å, beta = 102.879(9) degrees, and Z = 4. Solutions of Ca(SCEt(3))(2) and Y(N(SiMe(3))(2))(3) or ((Et(3)SC)(2)Y(&mgr;-SCEt(3))Py(2))(2) in pyridine were converted to gels or powders, respectively, by reaction with an excess of H(2)S, and the solids were pressed into pellets and thermolyzed to CaY(2)S(4) under flowing H(2)S.