Search

Potential photovoltaic technology includes the newly developed dye-sensitized solar cells (DSSCs) and bulk heterojunction (BHJ) solar cells. Owing to their diverse qualities, polymers can be employed in third-generation photovoltaic cells to specifically alter their device elements and frameworks. Polymers containing phenothiazine, either as a part of their structure or as a dopant, are easy and economical to synthesize, are soluble in common organic solvents, and have the potential to acquire desired electrochemical and photophysical properties by mere tuning of their chemical structures. Such polymers have therefore been used either as photosensitizers in dye-sensitized solar cells, where they have produced power conversion efficiency (PCE) values as high as 5.30%, or as donor or acceptor materials in bulk heterojunction solar cells. Furthermore, they have been employed to prepare liquid-free polymer electrolytes for dye-sensitized and bulk heterojunction solar cells, producing a PCE of 8.5% in the case of DSSCs. This paper reviews and analyzes almost all research works published to date on phenothiazine-based polymers and their uses in dye-sensitized and bulk heterojunction solar cells. The impacts of their structure and molecular weight and the amount when used as a dopant in other polymers on the absorption, photoluminescence, energy levels of frontier orbitals, and, finally, photovoltaic parameters are reviewed. The advantages of phenothiazine polymers for solar cells, the difficulties in their actual implementation and potential remedies are also evaluated.

Interfacial layers are frequently used in organic solar cells performing various functions, including blocking surface recombination, improving selectivity of charge carrier extraction, modification of the work function of the contact materials, and enhancing light absorption within the photoactive layer through an optical cavity effect. The aim of this work is to investigate the origin of performance enhancement of bulk heterojunction solar cells using various electron and hole interfacial layers, with a particular focus on separating the contributions of work function modification and reduced recombination to the improvement of the open circuit voltage ( V oc ). Solar cells using poly[ N-9'-hepta-decanyl-2,7-carbazole- alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)]:[6,6]-phenyl C 70 -butyric acid methyl ester (1:4) active layers were prepared with a combination of polymeric, metal oxide, and polyelectrolyte electron and/or hole interfacial layers. Four device structures with (i) no interfacial layers (reference); (ii) only hole; (iii) only electron; (iv) both electron and hole interfacial layers were fabricated and compared using current-voltage, transient photovoltage, and charge extraction measurements. The voltage gains (Δ V oc ) at matched charge density attributed to work function modification (Δ V oc h or Δ V oc e ) are distinguished from the increase in V oc arising from increased charge carrier density. At the hole contact, Δ V oc h was 0.21 V by using a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) hole interfacial layer, whereas Δ V oc e was 0.29 V on the electron contact using a polyethoxylate imine-TiO x interfacial layer compared to reference devices. The electron lifetime also improved by orders of magnitude with the use of either electron or hole contact layers, contributing to a further 0.35-0.38 V increase in the open circuit voltage (Δ V oc rec ) because of increased charge density. The increased charge carrier lifetime is proposed to originate from the larger spatial separation of the electrons and holes in the device because of the increased internal field. Using both an electron and a hole interfacial layer did not significantly increase the charge carrier lifetime compared to single interfacial layer devices; therefore, the V oc did not increase significantly. The findings presented clarify the role of interfacial layers in organic solar cells and provide new insights into using time-resolved charge extraction techniques to understand the influence of interfacial layers on the open circuit voltage.

Two D-A-D small molecules with a DPP acceptor core and Zn-porphyrin donor with different electron-donating substituents, namely, 2,6-bis(dodecyloxy)phenyl and 5-hexylthieno[3,2- b]thiophen-2-yl at mesopositions, VC4 and VC5, were synthesized, and their optical and electrochemical properties were investigated. The results reveal that both molecules are suitable as donors for organic solar cells (OSCs) in which PC 71 BM is employed as the acceptor. Overall power conversion efficiencies of 8.05% ( J sc = 13.83 mA/cm 2 , V oc = 0.91 V, and FF = 0.64) and 8.89% ( J sc = 16.98 mA/cm 2 , V oc = 0.79 V, and FF = 0.663) were obtained, respectively. The high V oc value for the VC4-based OSC correlates with the deeper HOMO, whereas the high J sc value for VC5 may be attributed to the extended absorption spectrum toward the longer wavelength region. Moreover, the relatively high FF value for VC5-based OSCs as compared to the VC4 counterparts may be related to the more balanced charge transport in the active layer, reduced charge recombination, and efficient charge collection. The energy loss for VC5 is smaller (0.52 eV) than that for VC4 (0.56 eV).

Three structurally disordered terpolymer derivatives of PffBT4T-2OD (PCE11), prepared by replacing a varied amount of bithiophene linkers with single thiophenes, were found to exhibit reduced aggregation in solution with increasing thiophene content, while important redox and optoelectronic properties remained similar to those of PffBT4T-2OD. Solar cells based on random terpolymer-PC 71 BM blends exhibited average power conversion efficiencies of over 9.5% when processed with preheated substrates, with fill factors above 70%, exceeding those from PffBT4T-2OD. Thanks to increased solubility, random terpolymer devices were able to be fabricated on room-temperature substrates, reaching virtually identical performance among all three polymers despite remarkable thicknesses of ∼400 nm. Thus, we show that the random terpolymer approach is successful in improving processability while maintaining device performance.

By varying the concentration of a solvent additive, we demonstrate the modulation of intermolecular (donor/acceptor (D/A) interface) and intramolecular (bulk) disorder in blends of the low-band gap polymer poly[2,6-(4,4-bis(2-ethylhexyl)-4 H-cyclopental[2,1- b;3,4- b']-dithiophene)- alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) blended with [6,6]-phenyl-C 71 -butyric acid methyl ester (PC 71 BM). Using the solvent additive concentration of 1,8-diiodooctane (DIO) in the host-processing solvent, the disorder in the bulk and at the interface is studied in terms of Urbach energy, electroluminescence (EL) broadening, and EL quantum efficiency (EL QE ). The Urbach energy varies from 80 to 39 meV for bulk and 39 to 51 meV for D/A interface. An interesting feature is that changes in the Urbach energy of the D/A interface are opposite to those of the Urbach energy of bulk; i.e., the disorder at the D/A interface increases as the disorder in the bulk decreases with increase in DIO concentration. Our study evidently suggested a negative correlation between intermolecular and intramolecular property in a bulk-heterojunction solar cell. Furthermore, scanning photocurrent microscopy measurements show that the effective hole transport length is double in magnitude for cells processed from 3 vol % DIO in comparison to that in cells processed from 0 vol %. This increase in effective hole transport length is explained by an increase in the delocalization of the electronic states involved in charge transport, as confirmed by dark J- V knee voltage,  J SC and E U-bulk measurements. Henceforth, we provide a functional relationship between the additive-induced bulk-heterojunction morphology and the optoelectronic properties of PCPDTBT-based solar cells.

Herein we report on the synthesis of an N -annulated perylene diimide (PDI) disubstituted thieno[3,4-c]pyrrole-4,6-dione (TPD) molecular acceptor (PDI-TPD-PDI) by direct heteroarylation (DHA) methods. Three sets of DHA conditions that explore the effects of solvent, temperature, and catalyst were employed to find the optimal conditions for the synthesis of two PDI-TPD-PDI derivatives. We then selected one PDI-TPD-PDI for use as a non-fullerene acceptor in organic solar cell devices with the donor polymer PBDB-T. Active layer bulk-heterojunction blends were modified using several post-deposition treatments, including thermal annealing, solvent vapour annealing, and high boiling solvent additives. It was found that active layers cast from o -dichlorobenzene with a 3% v/v diphenylether additive yielded films with adequate phase separation, and subsequently gave the best organic solar cell performance, with power conversion efficiencies greater than 3%.

Formation of Schottky barrier contact (SBC) leads reconstruction of charges at the metal/semiconductor (MS) interface because of the wave function overlap between semiconductor and metal contact. Not only is the Schottky barrier contact formation a signature of the material's work function, but also it is sensitive to the interface trap states, the crystal orientation of the interacting materials, and other interface properties. In this work, the effect of aluminum cathode morphology on the polymer Schottky diode and bulk heterojunction (BHJ) photovoltaic device performance is studied. The electron collecting contacts in Schottky diode and BHJ device have been deposited using aluminum in pellet and nanoparticle forms. Devices fabricated by using Al nanoparticle showed improvement in dark as well as photocurrent density. Significant enhancement in J SC leads to overall improved power conversion efficiency. Enhanced performance in Schottky structured diode and OPV device have been correlated with electrode microstructure and its interface properties such as improved electrically active contact and enhanced charge transport. Electrical conductivity is discussed based on enhanced electrical coherence across organic semiconductor and electrode interface. Therefore, the contribution of electrical enhancement leads to improvement in short-circuit current density (J SC ) in BHJ solar cell which is due to reduced trap density. Further, PCE was correlated with the density of interface trap states studied by drive level capacitance profiling technique.

The performance of devices relying on organic electronic materials, such as organic field-effect transistors (OFET) and organic photovoltaics (OPV), is strongly correlated to the morphology of the conjugated material in thin films. For instance, several factors such as polymer solubility, weak intermolecular forces between polymers and fullerene derivatives, and film drying time impact phase separation in the active layer of a bulk heterojunction OPV device. In an effort to probe the influence of polymer assembly on morphology of polymer thin films and phase separation with fullerene derivatives, five terthiophene-alt-isoindigo copolymers were synthesized with alkyl side-chains of varying lengths and branching on the terthiophene unit. These P[T3(R)-iI] polymers were designed to have similar optoelectronic properties but different solubilities in o-dichlorobenzene and were predicted to have different tendencies for crystallization. All polymers with linear alkyl chains exhibit similar thin film morphologies as investigated by grazing-incidence wide-angle X-ray scattering (GIWAXS) and atomic force microscopy (AFM). The main differences in electronic and morphological properties arise when P[T3(R)-iI] is substituted with branched 2-ethylhexyl (2EH) side-chains. The bulky 2EH substituents lead to a blue-shifted absorption, a lower ionization potential, and reduced ordering in polymer thin films. The five P[T3-iI] derivatives span hole mobilities from 1.5 × 10 -3 to 2.8 × 10 -2 cm 2 V -1 s -1 in OFET devices. In OPV devices, the 2EH-substituted polymers yield open-circuit voltages of 0.88 V in BHJ devices yet low short-circuit currents of 0.8 mA cm -2 , which is explained by the large phase separation observed by AFM in blends of P[T3(2EH)-iI] with PC 71 BM. In these P[T3(R)-iI] systems, the propensity for the polymers to self-assemble prior to aggregation of PC 71 BM molecules was key to achieving fine phase separation and increased short-circuit currents, eventually resulting in power conversion efficiencies of 5% in devices processed using a single solvent.

Two high bandgap benzodithiophene-benzotriazole-based polymers were synthesized via palladium-catalysed Stille coupling reaction. In order to compare the effect of the side chains on the opto-electronic and photovoltaic properties of the resulting polymers, the benzodithiophene monomers were substituted with either octylthienyl (PTzBDT-1) or dihexylthienyl (PTzBDT-2) as side groups, while the benzotriazole unit was maintained unaltered. The optical characterization, both in solution and thin-film, indicated that PTzBDT-1 has a red-shifted optical absorption compared to PTzBDT-2, likely due to a more planar conformation of the polymer backbone promoted by the lower content of alkyl side chains. The different aggregation in the solid state also affects the energetic properties of the polymers, resulting in a lower highest occupied molecular orbital (HOMO) for PTzBDT-1 with respect to PTzBDT-2. However, an unexpected behaviour is observed when the two polymers are used as a donor material, in combination with PC61BM as acceptor, in bulk heterojunction solar cells. Even though PTzBDT-1 showed favourable optical and electrochemical properties, the devices based on this polymer present a power conversion efficiency of 3.3%, considerably lower than the efficiency of 4.7% obtained for the analogous solar cells based on PTzBDT-2. The lower performance is presumably attributed to the limited solubility of the PTzBDT-1 in organic solvents resulting in enhanced aggregation and poor intermixing with the acceptor material in the active layer.

In this publication we show that the procedure to synthesize nanocrystals and the post-synthetic nanocrystal ligand sphere treatment have a great influence not only on the immediate performance of hybrid bulk heterojunction solar cells, but also on their thermal, long-term, and air stability. We herein demonstrate this for the particular case of spherical CdSe nanocrystals, post-synthetically treated with a hexanoic acid based treatment. We observe an influence from the duration of this post-synthetic treatment on the nanocrystal ligand sphere size, and also on the solar cell performance. By tuning the post-synthetic treatment to a certain degree, optimal device performance can be achieved. Moreover, we show how to effectively adapt the post-synthetic nanocrystal treatment protocol to different nanocrystal synthesis batches, hence increasing the reproducibility of hybrid nanocrystal:polymer bulk-heterojunction solar cells, which usually suffers due to the fluctuations in nanocrystal quality of different synthesis batches and synthesis procedures.

Efficient homo-tandem and triple-junction polymer solar cells are constructed by stacking identical subcells composed of the wide-bandgap polymer PBDTTPD, achieving power conversion efficiencies >8% paralleled by open-circuit voltages >1.8 V. The high-voltage homo-tandem is used to demonstrate PV-driven electrochemical water splitting with an estimated solar-to-hydrogen conversion efficiency of ≈6%., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The first two asymmetric-indenothiophene-based donor-acceptor copolymers (PITBT and PITFBT) are prepared through Stille coupling reactions between distannyl indenothiophene and brominated benzothiadiazole derivatives. The best performing solar cell fabricated from PITFBT exhibits a power conversion efficiency of 9.14% which demonstrates a great potential of the asymmetric indenothiophene for high-performance copolymers., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The power conversion efficiency potential of eight high-performance polymer-fullerene blends is investigated. All studied absorbers show the typical organic solar cell losses limiting their performance to ≈13%., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The ease with which small-molecule donors crystallize during solution processing is directly linked to the need for solvent additives. Donor molecules that get trapped in disordered (H1) or liquid crystalline (T1) mesophases require additive processing to promote crystallization, phase separation, and efficient light harvesting. A donor material (X2) that crystallizes directly from solution yields additive-free solar cells with an efficiency of 7.6%., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Optically resonant donor polymers can exploit a wider range of the solar spectrum effectively without a complicated tandem design in an organic solar cell. Ultrafast Förster resonance energy transfer (FRET) in a polymer-polymer system that significantly improves the power conversion efficiency in bulk heterojunction polymer solar cells from 6.8% to 8.9% is demonstrated, thus paving the way to achieving 15% efficient solar cells., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

By combining the molecular donor p-DTS(FBTTh2 )2 with a readily produced perylene diimide acceptor we are able to achieve a power conversion efficiency of 3.0%, making this one of the most efficient non-fullerene organic solar cells to date. The reduced power conversion efficiency of the present system compared to the use of phenyl-C71 -butyric acid methyl ester as an electron acceptor is shown to primarily be related to a significant reduction in the internal quantum efficiency. These results indicate the potential of small-molecule:non-fullerene bulk-heterojunction organic photovoltaics., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A number of diarylmethanofullerene derivatives were synthesized. The cyclopropane ring of the derivatives has two aryl groups substituted with electron-withdrawing and -donating groups, the latter with long alkyl chains to improve solubility in organic solvents, an important property in processing cells. First reduction potentials of most derivatives were less negative than that of [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), which is possibly ascribed to their electron-withdrawing nature. Organic thin-film photovoltaic cells fabricated with poly(3-hexylthiophene) (P3HT) as the electron-donor and diarylmethanofullerene derivatives as the electron-acceptor material were examined. The {(methoxycarbonyl)phenyl[bis(octyloxy)phenyl]methano}fullerene showed power conversion efficiency as high as PCBM, but had higher solubility in a variety of organic solvents than PCBM. The V(oc) value was higher than that of PCBM, which is derived from the electron-donating (octyloxy)phenyl group, possibly raising the LUMO level. Photovoltaic effects of the devices fabricated with the derivatives having some electron-withdrawing groups were also examined.