Search

Total organic halogen (TOX) is used to describe total amount of halogenated DBPs. Typically, once a chlor(am)inated water sample is collected, it is necessary to add a quenching agent to quench the residual disinfectant so that further reactions to form more DBPs during the holding time can be prevented. In this study, we evaluated the effects of four quenching agents: ammonium chloride (NH 4 Cl), ascorbic acid, sodium sulfite (Na 2 SO 3 ), and sodium thiosulfate (Na 2 S 2 O 3 ) on the decomposition of TOX, aliphatic and aromatic halogenated DBPs under various quenching conditions (quenching time, pH, quenching ratio, temperature). The results showed that ascorbic acid had the least impact on TOX. Ascorbic acid appeared to be the most suitable quenching agent for aliphatic halogenated DBPs, especially since it could preserve more haloacetonitriles than other quenching agents. Both ascorbic acid and Na 2 SO 3 could be used for the analysis of aromatic halogenated DBPs. The lower pH (pH 6.0), not excessive quenching agents and lower temperature (4 ºC) were all conducive to the preservation of TOX and halogenated DBPs. Importantly, unknown TOX (UTOX) also contained significantly toxic components. It was also found that addition of quenching agents might lead to underestimation of UTOX by researchers. SYNOPSIS: The quenching agents and quenching conditions for the analysis of total organic halogen, aliphatic and aromatic halogenated DBPs formed from chlor(am)ination were investigated., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Dissolved black carbon (DBC), the soluble component of black carbon, which mainly comes from the incomplete combustion of fossil fuels or biomass, is widely spread in source water and significantly contributes to the formation of dissolved organic matter (DOM). However, the origin of DBC in different types of source water in China has not been well studied, as well as its subsequent transformation and toxicity contribution during disinfection of source water DOM by chlor(am)ine. In this study, DBC from 17 different source water in East China at different seasons was collected. The δ 13 C compositions indicated that straw burning was the main origin of DBC in source water. After simulated chlor(am)ination of DBC, 5 categories of aliphatic disinfection byproducts (DBPs) including trihalomethanes, haloacetic acids, haloacetonitriles, haloketones, halonitromethanes and 6 categories of aromatic DBPs including halophenols, halonitrophenols, halohydroxybenzaldehyde, halohydroxybenzoic acid, halobenzoquinones and haloaniline were detected. Compared with chlorination of DBC, higher levels of nitrogenous DBPs and aromatic DBPs were generated during chloramination. Detected DBPs accounted for 42 % of total organic halogen. What's more, Chinese hamster ovary cells cytotoxicity tests showed that the cytotoxicity of DBPs formed by chlor(am)ination of DBC was 4 times higher than that by chlor(am)ination of DOM. Haloacetonitriles contributed to the highest cytotoxicity in the chloramination of DBC, and haloacetic acids contributed to the highest cytotoxicity in chlorination. 67 % of the total cytotoxicity attributed to the undetected DBPs. As a result, DBPs generated from DBC contributed to 11.7 % of the total cytotoxicity in the chlor(am)ination of the source water DOM although DBC only took up 2 % of DOC in the source water. Results obtained from this study systematically revealed the DBPs formation from DBC and their potential cytotoxicity contribution in the chlor(am)ination of source water DOM, which should not be ignored in drinking water treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Polycyclic aromatic hydrocarbons (PAHs) are persistent organic pollutants in the environment, which are teratogenic, carcinogenic, and mutagenic. Co-contamination of PAHs and heavy metal commonly exists in soil. In this study, 20 types of soils with different properties in China were collected and comprehensively characterized. Phenanthrene (Phe) and Cu (II) were selected as representatives of PAHs and heavy metals, respectively. The adsorption-desorption behaviors of Phe under Phe contamination and Cu (II)-Phe co-contamination in 20 types of soils were studied. The adsorption-desorption behaviors of Phe in 20 types of soils varied greatly, and adsorption of Phe in the soils followed both linear partitioning and nonlinear surface adsorption. Soil organic matter (SOM) plays an important role in the adsorption-desorption behavior of Phe. When the concentrations of Phe were >50 μg/L, soft carbon (SC) fraction of SOM not black carbon (BC) contributed more to the adsorption of Phe. Soil dissolved organic matter (DOM), especially fulvic acid and humic acid fractions, contributes to the adsorption of Phe. Under the effect of Cu (II) (60 mg/L in solution), the adsorption capacity of soil for Phe increased, which possibly resulted from lowered pH, the existence of the cation-π bonding and the "bonding bridge" effect. The systematic investigation of adsorption-desorption behaviors of Phe in soils under heavy metal-PAHs co-contamination will provide a scientific basis for the calculation of soil environmental capacity in the future., Competing Interests: Declaration of competing interest There is no conflict of interest exits in the submission of this manuscript, and manuscript is approved by all authors for publication. We declare that we have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this manuscript entitled “The effects of Cu-phenanthrene co-contamination on adsorption-desorption behaviors of phenanthrene in soils”., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Ultraviolet light-emitting diode (UV-LED) is a promising option for the traditional low-pressure UV lamp, but the evolutions of DOM composition, the formation of disinfection by-products (DBPs) and their toxicity need further study in raw water during UV-LED/chlorine process. In UV-LED (275 nm)/chlorine process, two-dimensional correlation spectroscopy (2DCOS) analysis on synchronous fluorescence and UV-vis spectra indicated the protein-like fractions responded faster than the humic-like components, the reactive sequence of peaks for DOM followed the order: 340 nm→240 nm→410 nm→205 nm→290 nm. Compared to chlorination for 30 mins, the UV-LED/chlorine process enhanced the degradation efficiency of three fluorescent components (humic-like, tryptophan-like, tyrosine-like) by 5.1%-46.1%, and the formation of carbonaceous DBPs (C-DBPs) significantly reduced by 43.8% while the formation of nitrogenous DBPs (N-DBPs) increased by 27.3%. The concentrations of C-DBPs increased by 17.8% whereas that of N-DBPs reduced by 30.4% in 24 h post-chlorination. The concentrations of brominated DBPs increased by 17.2% during UV-LED/chlorine process, and further increased by 18.5% in 24 h post-chlorination. According to the results of principal component analysis, the non-fluorescent components of DOM might be important precursors in the formation of haloketones, haloacetonitriles and halonitromethanes during UV-LED/chlorine process. Unlike chlorine treatment, the reaction of DOM in UV-LED/chlorine treatment generated fewer unknown DBPs. Compared with chlorination, the cytotoxicity of C-DBPs reduced but the cytotoxicity of both N-DBPs and Br-DBPs increased during UV-LED/chlorine process. Dichloroacetonitrile had the highest cytotoxicity, followed by monobromoacetic acid, bromochloroacetonitrile and trichloroacetic acid during 30 mins of UV-LED/chlorine process. Therefore, besides N-DBPs, the more toxic Br-DBPs formation in bromide-containing water is also not negligible in the practical applications of UV-LED (275 nm)/chlorine process., Competing Interests: Declaration of Competing Interest There is no conflict of interest exits in the submission of this manuscript, and manuscript is approved by all authors for publication. We declare that we have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this manuscript entitled “Evolutions of dissolved organic matter and disinfection by-products formation in source water during UV-LED (275 nm)/chlorine process”., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Environment disinfection effectively curbs transmission of the Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2). However, elevated concentration of free available chlorine (FAC) in disinfectants can be discharged into surface water, generating toxic disinfection byproducts (DBPs). The impact of solar photolysis of FAC on natural organic matter (NOM) to form DBPs has not been well studied. In this work, solar photolysis of FAC was found to result in higher formation of DBPs, DBPs formation potential (DBPsFP), total organic chlorine (TOCl) and lower specific ultraviolet absorbance at 254 nm (SUVA 254 ), compared to dark chlorination. In solar photolysis of FAC, formation of total DBPs was promoted by pH=8, but hindered by the addition of HCO 3 - , radical scavenger or deoxygenation, while addition of NO 3 - and NH 4 + both enhanced the formation of nitrogenous DBPs. Differences in the formation of DBPs in solar photolysis of FAC under various conditions were influenced by reactive species. The formation of trichloromethane (TCM) and haloacetic acids (HAAs) in solar photolysis of FAC positively correlated with the steady-state concentrations of ClO • and O 3 . The steady-state concentrations of • NO and • NH 2 positively correlated with the formation of halonitromethanes (HNMs). HAAs and haloacetonitriles (HANs) mainly contributed to calculated cytotoxicity of DBPs. This study demonstrates that solar photolysis of FAC may significantly impact the formation of DBPs in surface water due to extensive use of disinfectants containing FAC during SARS-CoV-2 pandemic., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

In this study, an endoinulinase gene from Aspergillus fumigatus was cloned and overexpressed in Pichia pastoris. A maximum activity, 3860 U/ml, of the recombinant endoinulinase was obtained by using a high cell-density fermentation approach. The recombinant endoinulinase with a molecular weight of 58 kDa was purified for further enzymatic investigation. The pH and temperature optima were pH 6.0 and 55 °C, and the K m and V max values toward inulin were 2.18 mM and 1590 μmol min(-1) mg(-1), respectively. The degree of polymerization (DP) for inulo-oligosaccharides product 3, 4, 5, and >5 was determined by thin-layer chromatography (TLC) and high-performance liquid chromatograph (HPLC). Immobilized endoinulinases were prepared and characterized, which showed higher stability than the free endoinulinase under various temperature levels. A residual activity of 81.2 % could be still obtained after ten reaction cycles. Thus, the present recombinant endoinulinase exhibited great potential for scale-up production of inulo-oligosaccharides.