Search

All-polymer solar cells have experienced rapid development in recent years by the emergence of polymerized small molecular acceptors (PSMAs). However, the strong chain entanglements of polymer donors (P D s) and polymer acceptors (P A s) decrease the miscibility of the resulting polymer mixtures, making it challenging to optimize the blend morphology. Herein, we designed three P A s, namely PBTPICm-BDD, PBTPICγ-BDD and PBTPICF-BDD, by smartly using a BDD unit as the polymerized unit to copolymerize with different Y-typed non-fullerene small molecular acceptors (NF-SMAs), thus achieving a certain degree of distortion and giving the polymer system enough internal space to reduce the entanglements of the polymer chains. Such effects increase the chances of the P D being interspersed into the acceptor material, which improve the solubility between the P D and P A . The PBTPICγ-BDD and PBTPICF-BDD displayed better miscibility with PBQx-TCl, leading to a well optimized morphology. As a result, high power conversion efficiencies (PCEs) of 17.50 % and 17.17 % were achieved for PBQx-TCl : PBTPICγ-BDD and PBQx-TCl : PBTPICF-BDD devices, respectively. With the addition of PYFT-o as the third component into PBQx-TCl : PBTPICγ-BDD blend to further extend the absorption spectral coverage and finely tune microstructures of the blend morphology, a remarkable PCE of 18.64 % was realized finally., (© 2024 Wiley-VCH GmbH.)

Various isomers have been developed to regulate the morphology and reduce defects in state-of-the-art perovskite solar cells. To insight the structure-function-effect correlations for the isomerization of thiourea derivatives on the performance of the perovskite solar cells (PSCs), we developed two thiourea derivatives [(3,5-dichlorophenyl)amino]thiourea (AT) and N-(3,5-dichlorophenyl)hydrazinecarbothioamide (HB). Supported by experimental and calculated results, it was found that AT can bind with undercoordinated Pb2+ defect through synergistic interaction between N1 and C=S group with a defect formation energy of 1.818 eV, which is much higher than that from the synergistic interaction between two -NH- groups in HB and perovskite (1.015 eV). Moreover, the stronger interaction between AT and Pb2+ regulates the crystallization process of perovskite film to obtain a high-quality perovskite film with high crystallinity, large grain size, and low defect density. Consequently, the AT-treated FACsPbI3 device engenders an efficiency of 25.71% (certified as 24.66%), which is greatly higher than control (23.74%) and HB-treated FACsPbI3 devices (25.05%). The resultant device exhibits a remarkable stability for maintaining 91.0% and 95.2% of its initial efficiency after aging 2000 h in air condition or tracking at maximum power point for 1000 h, respectively., (© 2024 Wiley‐VCH GmbH.)

Organic self-assembled molecules (OSAMs) based hole-transporting materials play a pivotal role in achieving highly efficient and stable inverted perovskite solar cells (IPSCs). However, the reported carbazol-based OSAMs have serious drawbacks, such as poor wettability for perovskite solution spreading due to the nonpolar surface, worse matched energy arrangement with perovskite, and limited molecular species, which greatly limit the device performance. To address above problems, a novel OSAM [4-(3,6-glycol monomethyl ether-9H-carbazol-9-yl) butyl]phosphonic acid (GM-4PACz) was synthesized as hole-transporting material by introducing glycol monomethyl ether (GM) side chains at carbazolyl unit. GM groups enhance the surface energy of Indium Tin Oxide (ITO)/SAM substrate to facilitate the nucleation and growth of up perovskite film, suppress cation defects, release the residual stress at SAM/perovskite interface, and evaluate energy level for matching with perovskite. Consequently, the GM-4PACz based IPSC achieves a champion PCE of 25.52 %, a respectable open-circuit voltage (V OC ) of 1.21 V, a high stability, possessing 93.29 % and 91.75 % of their initial efficiency after aging in air for 2000 h or tracking at maximum power point for 1000 h, respectively., (© 2024 Wiley-VCH GmbH.)

Volatile solid additives have attracted increasing attention in optimizing the morphology and improving the performance of currently dominated non-fullerene acceptor-based organic solar cells (OSCs). However, the underlying principles governing the rational design of volatile solid additives remain elusive. Herein, a series of efficient volatile solid additives are successfully developed by the crossbreeding effect of chalcogenation and iodination for optimizing the morphology and improving the photovoltaic performances of OSCs. Five benzene derivatives of 1,4-dimethoxybenzene (DOB), 1-iodo-4-methoxybenzene (OIB), 1-iodo-4-methylthiobenzene (SIB), 1,4-dimethylthiobenzene (DSB) and 1,4-diiodobenzene (DIB) are systematically studied, where the widely used DIB is used as the reference. The effect of chalcogenation and iodination on the overall property is comprehensively investigated, which indicates that the versatile functional groups provided various types of noncovalent interactions with the host materials for modulating the morphology. Among them, SIB with the combination of sulphuration and iodination enabled more appropriate interactions with the host blend, giving rise to a highly ordered molecular packing and more favorable morphology. As a result, the binary OSCs based on PM6:L8-BO and PBTz-F:L8-BO as well as the ternary OSCs based on PBTz-F:PM6:L8-BO achieved impressive high PCEs of 18.87%, 18.81% and 19.68%, respectively, which are among the highest values for OSCs., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

A double-fibril network of the photoactive layer morphology is recognized as an ideal structure facilitating exciton diffusion and charge carrier transport for high-performance organic solar cells (OSCs). However, in the layer-by-layer processed OSCs (LbL-OSCs), polymer donors and small molecule acceptors (SMAs) are separately deposited, and it is challenging to realize a fibril network of pure SMAs with the absence of tight interchain entanglement as polymers. In this work, crystalline small molecule donors (SMDs), named TDZ-3TR and SeDZ-3TR, were designed and introduced into the L8-BO acceptor solution, forcing the phase separation and molecular fibrilization. SeDZ-3TR showed higher crystallinity and lower miscibility with L8-BO acceptor than TDZ-3TR, enabling more driving force to favor the phase separation and better molecular fibrilization of L8-BO. On the other hand, two donor polymers of PM6 and D18 with different fibril widths and lengths were put together to optimize the fibril network of the donor layer. The simultaneously optimization of the acceptor and donor layers resulted in a more ideal double-fibril network of the photoactive layer and an impressive power conversion efficiency (PCE) of 19.38 % in LbL-OSCs., (© 2024 Wiley-VCH GmbH.)

Developing an additive to effectively regulate the perovskite crystallization kinetics for the optimized optoelectronic properties of perovskite film plays a vital role in obtaining high efficiency and stable perovskite solar cells (PSCs). Herein, a new additive is designed and directly synthesized in perovskite precursor solution by utilizing an addition reaction between but-3-yn-1-amine hydrochloride (BAH) and formamidinium iodide. It is found that its product may control the intermediate precursor phase for regulating perovskite nucleation, leading to advantageous 2D perovskite to induce growth of perovskite along the preferred [001] orientation with not only released lattice strain but also strong interaction with perovskite to passivate its surface defects. By taking advantage of the above synergistic effects, the optimized PSC delivers an efficiency of 25.19% and a high open-circuit voltage (V OC ) of 1.22 V. Additionally, the devices demonstrate good stability, remaining over 90% of their initial efficiencies under ambient atmosphere conditions for 60 days, high temperature of 85 °C for 200 h, or maximum power point tracking for 500 h., (© 2024 Wiley‐VCH GmbH.)

Background: Antral follicles consist of an oocyte cumulus complex surrounding by somatic cells, including mural granulosa cells as the inner layer and theca cells as the outsider layer. The communications between oocytes and granulosa cells have been extensively explored in in vitro studies, however, the role of oocyte-derived factor GDF9 on in vivo antral follicle development remains elusive due to lack of an appropriate animal model. Clinically, the phenotype of GDF9 variants needs to be determined., Methods: Whole-exome sequencing (WES) was performed on two unrelated infertile women characterized by an early rise of estradiol level and defect in follicle enlargement. Besides, WES data on 1,039 women undergoing ART treatment were collected. A Gdf9 Q308X/S415T mouse model was generated based on the variant found in one of the patients., Results: Two probands with bi-allelic GDF9 variants (GDF9 His209GlnfsTer6/S428T , GDF9 Q321X/S428T ) and eight GDF9 S428T heterozygotes with normal ovarian response were identified. In vitro experiments confirmed that these variants caused reduction of GDF9 secretion, and/or alleviation in BMP15 binding. Gdf9 Q308X/S415T mouse model was constructed, which recapitulated the phenotypes in probands with abnormal estrogen secretion and defected follicle enlargement. Further experiments in mouse model showed an earlier expression of STAR in small antral follicles and decreased proliferative capacity in large antral follicles. In addition, RNA sequencing of granulosa cells revealed the transcriptomic profiles related to defective follicle enlargement in the Gdf9 Q308X/S415T group. One of the downregulated genes, P4HA2 (a collagen related gene), was found to be stimulated by GDF9 protein, which partly explained the phenotype of defective follicle enlargement., Conclusions: GDF9 bi-allelic variants contributed to the defect in antral follicle development. Oocyte itself participated in the regulation of follicle development through GDF9 paracrine effect, highlighting the essential role of oocyte-derived factors on ovarian response., (© 2024. The Author(s).)

The success of Y6-type nonfullerene small molecule acceptors (NF-SMAs) in polymer solar cells (PSCs) can be attributed to their unique honeycomb stacking style, which leads to favorable thin-film morphologies. The intermolecular interactions related to the crystallization tendency of these NF-SMAs is closely governed by their electron accepting end groups. For example, the high performance Y6 derivative L8-BO (BTP-4F) presents three types of stacking modes in contrast to two stacking modes of Y6. Hence, it is ultimately interesting to obtain more insight on the packing properties and the preferences influenced by chemical modifications such as end group engineering. This work designs and synthesizes asymmetric and symmetric L8-BO derivatives with brominated end groups and explores the stacking preferences in various modes. The asymmetric BTP-3FBr displays an optimized crystallization tendency and thin film morphology, leading to a decent power conversion efficiency (PCE) of 18.34% in binary devices and a top PCE of 19.32% in ternary devices containing 15 wt% IDIC as the second acceptor., (© 2023 Wiley-VCH GmbH.)

The limited selection of wide bandgap polymer donors for all-polymer solar cells (all-PSCs) is a bottleneck problem restricting their further development and remains poorly studied. Herein, a new wide bandgap polymer, namely PBBTz-Cl, is designed and synthesized by bridging the benzobisthiazole acceptor block and chlorinated benzodithiophene donor block with thiophene units for application as an electron donor in all-PSCs. PBBTz-Cl not only possesses wide bandgap and deep energy levels but also displays strong absorption, high-planar structure, and good crystallinity, making it a promising candidate for application as a polymer donor in organic solar cells. When paired with the narrow bandgap polymer acceptor PY-IT, a fibril-like morphology forms, which facilitates exciton dissociation and charge transport, contributing to a power conversion efficiency (PCE) of 17.15% of the corresponding all-PSCs. Moreover, when introducing another crystalline polymer acceptor BTP-2T2F into the PBBTz-Cl:PY-IT host blend, the absorption ditch in the range of 600-750 nm is filled, and the blend morphology is further optimized with the trap density reducing. As a result, the ternary blend all-PSCs achieve a significantly improved PCE of 18.60%, which is among the highest values for all-PSCs to date., (© 2023 Wiley-VCH GmbH.)

Power-conversion-efficiencies (PCEs) of organic solar cells (OSCs) in laboratory, normally processed by spin-coating technology with toxic halogenated solvents, have reached over 19%. However, there is usually a marked PCE drop when the blade-coating and/or green-solvents toward large-scale printing are used instead, which hampers the practical development of OSCs. Here, a new series of N-alkyl-tailored small molecule acceptors named YR-SeNF with a same molecular main backbone are developed by combining selenium-fused central-core and naphthalene-fused end-group. Thanks to the N-alkyl engineering, NIR-absorbing YR-SeNF series show different crystallinity, packing patterns, and miscibility with polymeric donor. The studies exhibit that the molecular packing, crystallinity, and vertical distribution of active layer morphologies are well optimized by introducing newly designed guest acceptor associated with tailored N-alkyl chains, providing the improved charge transfer dynamics and stability for the PM6:L8-BO:YR-SeNF-based OSCs. As a result, a record-high PCE approaching 19% is achieved in the blade-coating OSCs fabricated from a green-solvent o-xylene with high-boiling point. Notably, ternary OSCs offer robust operating stability under maximum-power-point tracking and well-keep > 80% of the initial PCEs for even over 400 h. Our alkyl-tailored guest acceptor strategy provides a unique approach to develop green-solvent and blade-coating processed high-efficiency and operating stable OSCs, which paves a way for industrial development., (© 2023. The Author(s).)

Lasso peptides are ribosomally synthesized peptides that undergo post-translational modifications including leader peptide removal by B (or the segregated B1 and B2) proteins and core peptide macrolactamization by C proteins to form a unique lariat topology. A conserved threonine residue at the penultimate position of leader peptide is hitherto found in lasso peptide precursors and shown to be a critical recognition element for effective enzymatic processing. We identified a lasso peptide biosynthetic gene cluster ( bsf ) from Bradymonas sediminis FA350, a Gram-negative and facultatively prey-dependent bacterium that belongs to a novel bacterial order Bradymonadales in the class Deltaproteobacteria . The kinase BsfK specifically catalyzes the phosphorylation of the precursor peptide BsfA on the Ser3 residue. BsfB1 performs dual functions to accelerate the post-translational phosphorylation and assist BsfB2 in leader peptide removal. Most importantly, the penultimate residue of leader peptide is an isoleucine rather than the conserved threonine and this isoleucine has a marked impact on the phosphorylation of Ser3 as well as leader peptide removal, implying that BsfB1 and BsfB2 exhibit a new substrate selectivity for leader peptide binding and excision. This is the first experimentally validated penultimate isoleucine residue in a lasso peptide precursor to our knowledge. In silico analysis reveals that the leader peptide Ile/Val(-2) residue is rare but not uncommon in phosphorylated lasso peptides, as this residue is also discovered in Acidobacteriaceae and Sphingomonadales in addition to Bradymonadales ., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Duan, Niu, Pang, Mu, Du, Zhang, Bian and Zhong.)

Judicious tailoring of the interface between the SnO 2 electron-transport layer and the perovskite buried surface plays a pivotal role in obtaining highly efficient and stable perovskite solar cells (PSCs). Herein, a DL-carnitine hydrochloride (DL) is incorporated into the perovskite/SnO 2 interface to suppress the defect-states density. A DL-dimer is obtained at the interface by an intermolecular esterification reaction. For the SnO 2 film, the Cl - in the DL-dimer can passivate oxygen vacancies (V O ) through electrostatic coupling, while the N in the DL-dimer can coordinate with the Sn 4+ to passivate Sn-related defects. For the perovskite film, the DL-dimer can passivate FA + defects via hydrogen bonding and Pb-related defects more efficiently than the DL monomer. Upon DL-dimer modification, the interfacial defects are effectively passivated and the quality of the resultant perovskite film is improved. As a result, the DL-treated device achieves a gratifying open-circuit voltage (V OC ) of 1.20 V and a champion power conversion efficiency (PCE) of 25.24%, which is a record value among all the reported FACsPbI 3 PSCs to date. In addition, the unencapsulated devices exhibit a charming stability, sustaining 99.20% and 90.00% of their initial PCEs after aging in air for 1200 h and continuously operating at the maximum power point tracking for 500 h, respectively., (© 2023 Wiley-VCH GmbH.)

Perovskite-based tandem solar cells have attracted increasing interest because of its great potential to surpass the Shockley-Queisser limit set for single-junction solar cells. In the tandem architectures, the wide-bandgap (WBG) perovskites act as the front absorber to offer higher open-circuit voltage (V OC ) for reduced thermalization losses. Taking advantage of tunable bandgap of the perovskite materials, the WBG perovskites can be easily obtained by substituting halide iodine with bromine, and substituting organic ions FA and MA with Cs. To date, the most concerned issues for the WBG perovskite solar cells (PSCs) are huge V OC deficit and severe photo-induced phase separation. Reducing V OC loss and improving photostability of the WBG PSCs are crucial for further efficiency breakthrough. Recently, scientists have made great efforts to overcome these key issues with tremendous progresses. In this review, we first summarize the recent progress of WBG perovskites from the aspects of compositions, additives, charge transport layers, interfaces and preparation methods. The key factors affecting efficiency and stability are then carefully discussed, which would provide decent guidance to develop highly efficient and stable WBG PSCs for tandem application., (© 2023. The Author(s).)

Cesium lead triiodide (CsPbI 3 ) is a promising light-absorbing material for constructing perovskite solar cells (PSCs) owing to its favorable bandgap and thermal tolerance. However, the high density of defects in the CsPbI 3 film not only act as recombination centers, but also facilitate ion migration, leading to lower PCE and inferior stability compared with the state-of-the-art organic-inorganic hybrid PSC counterpart. Theoretical analyses suggest that the effective suppression of defects in CsPbI 3 film is helpful for improving the device performance. Herein, the stable and efficient γ -CsPbI 3 PSCs are demonstrated by developing an acyloin ligand (1,2-di(thiophen-2-yl)ethane-1,2-dione (DED)) as a phase stabilizer and defect passivator. The experiment and calculation results confirm that carbonyl and thienyl in DED can synergistically interact with CsPbI 3 by forming a chelate to effectively passivate Pb-related defects and further suppress ion migration. Consequently, DED-treated CsPbI 3 PSCs yield a champion PCE of 21.15%, which is one of the highest PCE among all the reported CsPbI 3 PSCs to date. In addition, the unencapsulated DED-CsPbI 3 PSC can retain 94.9% of itsinitial PCE when stored under ambient conditions for 1000 h and 92.8% of its initial PCE under constant illumination for 250 h., (© 2023 Wiley-VCH GmbH.)

Raising the lowest unoccupied molecular orbital (LUMO) energy level of Y-type non-fullerene acceptors can increase the open-circuit voltage (V oc ) and thus the photovoltaic performance of the current top performing polymer solar cells (PSCs). One of the viable routes is demonstrated by the successful Y6 derivative of L8-BO with the branched alkyl chains at the outer side. This will introduce steric hindrance and reduce intermolecular aggregation, thus open up the bandgap and raise the LUMO energy level. To take further advantages of the steric hindrance influence on optoelectronic properties of Y6 derivatives, two Y-type non-fullerene acceptors of BTP-Cy-4F and BTP-Cy-4Cl are designed and synthesized by adopting outer branched side chains and inner cyclohexane side chains. An outstanding V oc of 0.937 V is achieved in the D18:BTP-Cy-4F binary blend devices along with a power conversion efficiency (PCE) of 18.52%. With the addition of BTP-eC9 to extend the absorption spectral coverage, a remarkable PCE of 19.36% is realized finally in the related ternary blend devices, which is one of the highest values for single-junction PSCs at present. The results illustrate the great potential of cyclohexane side chains in constructing high-performance non-fullerene acceptors and their PSCs., (© 2023 Wiley-VCH GmbH.)

Recurrent implantation failure (RIF) is a thorny problem often encountered in the field of assisted reproduction. Existing evidences suggest that immune dysregulation may be involved in the pathogenesis of RIF. The purpose of this study is to explore immune-related genes contributing to RIF through data mining. The endometrial expression profiles of 24 RIF and 24 controls were obtained from the GEO database. The immune infiltration in bulk tissue was estimated by single sample gene set enrichment analysis (ssGSEA) method based on marker gene sets for immune cells generated from endometrial single-cell RNA sequencing data. The results showed that the infiltration levels of B cells and regulatory T cells (Tregs) were significantly reduced in the RIF group. Four hub genes (GJA1, PRKAG2, CPT1A, and ICA1) were identified by integrated analysis of weighted gene co-expression network analysis (WGCNA), random forest and LASSO regression. Moreover, these hub genes were significantly correlated with certain immune-related factors, especially CXCL12, CEACAM1, and XCR1. Single-gene GSEA indicated that the pathways associated with hub genes included the regulation of cell cycle, the process of epithelial-mesenchymal transition and transplant rejection, etc. A predictive model for RIF was constructed based on hub genes and performed well in the training dataset and the other two external datasets. Thus, this study identified immune-related key genes in RIF and provided new biomarkers for early diagnosis., (© 2022. The Author(s), under exclusive licence to Society for Reproductive Investigation.)

The morphology plays a key role in determining the charge generation and collection process, thus impacting the performances of organic solar cells (OSCs). The limited selection pool of additives to optimize the morphology of OSCs, especially for the emerging layer-by-layer (LbL) OSCs, impeding the improvements of photovoltaic performances. Herein, a new method of using conjugated polymers as the additives to optimize the morphology for improving the photovoltaic performances of LbL-OSCs is reported. Four polymers of PH, PS, PF, and PCl are developed with different side chains. These polymers exhibit poor performances as donor materials and additives in the BHJ devices, due to the unsuitable energy level alignment and unfavorable molecular interactions. By contrast, they can be served as efficient additives to optimize the PM6 fibril matrix for facilitating the penetration of BTP-eC9 and forming an intertwined D/A bicontinuous network with a vertical segregation. Such morphology is optimized by side chain engineering, which enables the progressive improvement of the charge separation and collection. As a result, adding a small amount of PCl as the additive, the optimized morphology contributes to a champion PCE of 19.10% with a high FF of 80.5%., (© 2022 Wiley-VCH GmbH.)

All-inorganic CsPbI 3 perovskite solar cells (PSCs) have been extensively studied due to their high thermal stability and unprecedented rise in power conversion efficiency (PCE). Recently, the champion PCE of CsPbI 3 PSCs has reached up to 21%; however, it is still much lower than that of organic-inorganic hybrid PSCs. Interface modification to passivate surface defects and minimize charge recombination and trapping is important to further improve the efficiency of CsPbI 3 PSCs. Herein, a new zwitterion ion is deposited at the interface between electron transporting layer (ETL) and perovskite layer to passivate the defects therein. The zwitterion ions can not only passivate oxygen vacancy (V O ) and iodine vacancy (V I ) defects, but also improve the band alignment at the ETL-perovskite interface. After the interface treatment, the PCE of CsPbI 3 device reaches up to 20.67%, which is among the highest values of CsPbI 3 PSCs so far. Due to the defect passivation and hydrophobicity improvement, the PCE of optimized device remains 94% of its original value after 800 h storing under ambient condition. These results provide an efficient way to improve the quality of ETL-perovskite interface by zwitterion ions for achieving high performance inorganic CsPbI 3 PSCs., (© 2022 Wiley-VCH GmbH.)

Background: Although live birth rates were comparable between programmed and natural frozen-thawed embryo transfer cycles, recent data showed that pregnancies after programmed cycle were associated with an increased risk of adverse perinatal outcomes, such as hypertensive disorders of pregnancy. Such a difference might be attributed to selection bias because patients with ovulation disorders are more likely to receive programmed endometrial preparation protocol than natural cycle., Objective: This study aimed to analyze whether programmed endometrial preparation protocol is associated with an increased risk of adverse perinatal outcomes compared with natural cycle during frozen embryo transfer in ovulatory women., Study Design: This regional multicenter retrospective cohort study was conducted in 5 reproductive medical centers in Southeast China. Patients with regular cycles (21-35 days), who underwent either programmed or natural cycle blastocyst frozen embryo transfer and delivered singleton live birth babies after 28 weeks of gestation between 2016 and 2019 were analyzed. Each patient only contributed 1 cycle per cohort. The patients' frozen embryo transfer treatment cycles were linked to their obstetrical medication record, and a comprehensive medical record review was conducted to compare the maternal and neonatal outcomes between natural cycle and programmed cycle. Crude and adjusted odds ratios with 95% confidence intervals were calculated, and adjustment was made for relevant confounders., Results: Study samples included 499 natural cycle frozen embryo transfer cases and 900 programmed frozen embryo transfer cases. Pregnancies after programmed cycle were associated with increased odds of hypertensive disorders of pregnancy (adjusted odds ratio, 2.71; 95% confidence interval, 1.59-4.91) and preeclampsia (adjusted odds ratio, 2.71; 95% confidence interval, 1.17-6.23) compared with pregnancies after natural cycle. No significant difference was detected regarding other adverse perinatal outcomes between the 2 endometrial protocols. In subgroup analysis, both the subgroups of hormone replacement therapy and hormone replacement therapy with gonadotrophin-releasing hormone analogue pretreatment had increased odds of developing hypertensive disorders of pregnancy than the natural cycle group. The risk of developing preeclampsia was higher in the hormone replacement therapy with gonadotrophin-releasing hormone analogue pretreatment subgroup than in the other 2 groups (adjusted odds ratio, 4.99; 95% confidence interval, 1.94-12.82) (aOR, 2.47; 95% CI, 1.17-5.18)., Conclusion: Pregnancies after programmed frozen embryo transfer were associated with higher risks of hypertensive disorders of pregnancy in ovulatory women. The hormone replacement therapy with gonadotrophin-releasing hormone analogue pretreatment cycle led to the highest risk of preeclampsia among the 3 protocols., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Side-chain engineering with heteroatoms is not only effective in tuning frontier molecular orbitals, but also possible for forming secondary bonds which can be utilized to planarize the molecular backbone, hence, improving the photon absorption as well as charge-transport abilities of polymer solar-cell (PSC) materials. Herein, two types of unconventional side chains, namely carboxylate and carbamate, containing various heteroatoms are introduced to the thiophene bridges in high performance benzodithiophene (BDT) based donor polymers to from the novel polymers PTzTz-C and PTzTz-N, respectively. In these polymers, non-covalent O⋅⋅⋅S and N⋅⋅⋅H interactions induce a high tendency to aggregation. In a ternary-blend PSC with PTzTz-N added to the high-performance D18 : BTP-eC9 blend, complimentary absorption and improved thin-film morphology were observed with a top power conversion efficiency of 18.76 %, which is an improvement of almost 5 % over the D18 : BTP-eC9 binary blends., (© 2022 Wiley-VCH GmbH.)

Suppressing defects at the interface between the TiO 2 electron transport layer (ETL) and perovskite film is critical for high efficiency and stable perovskite solar cells (PSCs). Herein, a siloxane derivative diethylphosphatoethylsilicic acid (PSiOH) is developed to modify the interface of TiO 2 ETL/FA 0.83 Cs 0.17 PbI 3 perovskite. Comprehensive characteristics reveal that silicon hydroxyl (SiOH) in PSiOH can reduce surface defects, improve the electrical properties and optimize the energy band structure of TiO 2 by forming a SiOTi bond, while the phosphate bond (PO) in PSiOH can passivate Pb-related defects on the perovskite bottom surface. Consequently, PSiOH-modified PSCs yield a remarkable power conversation efficiency of 24.20% and improved air, thermal, or illumination stabilities. This study provides insight into passivation defects at the buried interface for efficient and stable PSCs., (© 2022 Wiley-VCH GmbH.)

All-inorganic CsPbI 3 perovskite presents preeminent chemical stability and a desirable band gap as the front absorber for perovskite/silicon tandem solar cells. Unfortunately, CsPbI 3 perovskite solar cells (PSCs) still show low efficiency due to high density of defects in solution-prepared CsPbI 3 films. Herein, three kinds of hydrazide derivatives (benzoyl hydrazine (BH), formohydrazide (FH) and benzamide (BA)) are designed to reduce the defect density and stabilize the phase of CsPbI 3 . Calculation and characterization results corroborate that the carboxyl and hydrazine groups in BH form strong chemical bonds with Pb 2+ ions, resulting in synergetic double coordination. In addition, the hydrazine group in the BH also forms a hydrogen bond with iodine to assist the coordination. Consequently, a high efficiency of 20.47 % is achieved, which is the highest PCE among all pure CsPbI 3 -based PSCs reported to date. In addition, an unencapsulated device showed excellent stability in ambient air., (© 2022 Wiley-VCH GmbH.)

Lasso peptides are a subclass of ribosomally synthesized and post-translationally modified peptides (RiPPs) and feature the threaded, lariat knot-like topology. The basic post-translational modifications (PTMs) of lasso peptide contain two steps, including the leader peptide removal of the ribosome-derived linear precursor peptide by an ATP-dependent cysteine protease, and the macrolactam cyclization by an ATP-dependent macrolactam synthetase. Recently, advanced bioinformatic tools combined with genome mining have paved the way to uncover a rapidly growing number of lasso peptides as well as a series of PTMs other than the general class-defining processes. Despite abundant reviews focusing on lasso peptide discoveries, structures, properties, and physiological functionalities, few summaries concerned their unique PTMs. In this review, we summarized all the unique PTMs of lasso peptides uncovered to date, shedding light on the related investigations in the future.

Flexible perovskite solar cells (f-PSCs) have attracted great attention because of their unique advantages in lightweight and portable electronics applications. However, their efficiencies are far inferior to those of their rigid counterparts. Herein, a novel histamine diiodate (HADI) is designed based on theoretical study to modify the SnO 2 /perovskite interface. Systematic experimental results reveal that the HADI serves effectively as a multifunctional agent mainly in three aspects: 1) surface modification to realign the SnO 2 conduction band upward to improve interfacial charge extraction; 2) passivating the buried perovskite surface, and 3) bridging between the SnO 2 and perovskite layers for effective charge transfer. Consequently, the rigid MA-free PSCs based on the HADI-SnO 2 electron transport layer (ETL) display not only a high champion power conversion efficiency (PCE) of 24.79% and open-circuit voltage (V OC ) of 1.20 V but also outstanding stability as demonstrated by the PSCs preserving 91% of their initial efficiencies after being exposed to ambient atmosphere for 1200 h without any encapsulation. Furthermore, the solution-processed HADI-SnO 2 ETL formed at low temperature (100 °C) is utilized in f-PSCs that achieve a PCE as high as 22.44%, the highest reported PCE for f-PSCs to date., (© 2022 Wiley-VCH GmbH.)

Controlled ovarian stimulation (COS) is one of the most vital parts of in vitro fertilization-embryo transfer (IVF-ET). At present, no matter what kinds of COS protocols are used, clinicians have to face the challenge of selection of gonadotropin starting dose. Although several nomograms have been developed to calculate the appropriate gonadotropin starting dose in gonadotropin releasing hormone (GnRH) agonist protocol, no nomogram was suitable for GnRH antagonist protocol. This study aimed to develop a predictive nomogram for individualized gonadotropin starting dose in GnRH antagonist protocol. Single-center prospective cohort study was conducted, with 198 women aged 20-45 years underwent IVF/intracytoplasmic sperm injection (ICSI)-ET cycles. Blood samples were collected on the second day of the menstrual cycle. All women received ovarian stimulation using GnRH antagonist protocol. Univariate and multivariate analysis were performed to identify predictive factors of ovarian sensitivity (OS). A nomogram for gonadotropin starting dose was developed based on the multivariate regression model. Validation was performed using concordance statistics and bootstrap resampling. A multivariate regression model based on serum anti-Müllerian hormone (AMH) level, antral follicle count (AFC), and body mass index (BMI) was developed and accounted for 59% of the variability of OS. An easy-to-use predictive nomogram for gonadotropin starting dose was established with excellent accuracy. The concordance index (C-index) of the nomogram was 0.833 (95% CI, 0.829-0.837). Internal validation using bootstrap resampling further showed the good performance of the nomogram. In conclusion, gonadotropin starting dose in antagonist protocol can be predicted precisely by a novel nomogram., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Li, Duan, Yuan, Cai, Xu and Yuan.)

Luteinization is the event of corpus luteum formation, a way of follicle cells transformation and a process of steroidogenesis alteration. As the core clock gene, Bmal1 was involved in the regulation of ovulation process and luteal function afterwards. Till now, the underlying roles of luteinization played by Bmal1 remain unknown. To explore the unique role of Bmal1 in luteal steroidogenesis and its underlying pathway, we investigated the luteal hormone synthesis profile in Bmal1 knockout female mice. We found that luteal hormone synthesis was notably impaired, and phosphorylation of PI3K/NfκB pathway was significantly activated. Then, the results were verified in in vitro cultured cells, including isolated Bmal1 interference granulosa cells (GCs) and theca cells (TCs), respectively. Hormones levels of supernatant culture media and mRNA expressions of steroidogenesis-associated genes (star, Hsd3β2, cyp19a1 in GCs, Lhcgr, star, Hsd3β2, cyp17a1 in TCs) were mutually decreased, while the phosphorylation of PI3K/NfκB was promoted during in vitro luteinization. After PI3K specific-inhibitor LY294002 intervention, mRNA expressions of Lhcgr and Hsd3β2 were partially rescued in Bmal1 interference TCs, together with significantly increased androstenedione and T synthesis. Further exploration in TCs demonstrated BMAL1 interacted directly but negatively with NfκB p65 (RelA), a subunit which was supposed as a mediator in Bmal1-governed PI3K signaling regulation. Taken together, we verified the novel role of Bmal1 in luteal steroidogenesis, achieving by negative interplay with RelA-mediated PI3K/NfκB pathway.

Objective: To study the role of selected serum inflammatory cytokines and berberine in the insulin signaling pathway among women with polycystic ovary syndrome (PCOS)., Methods: Selected serum inflammatory cytokines were analyzed in the particle cells, which were interfered by berberine, from 78 infertile women who were to be treated with In Vitro Fertilization (IVF) /Intracytoplasmic Sperm Injection-Embryo Transfer (icsi-et). Among them, 49 patients had PCOS infertility, and 29 were non-PCOS patients whose infertility resulted from fallopian tube and male factors. The elisa method was used to detect the changes in the expression levels of inflammatory factors in the cells. The correlations between the serum inflammatory cytokine expression levels and the corresponding clinical hormones were analyzed. The changes in the expression (mRNA and protein) levels of the serum inflammatory cytokines were studied by real-time quantitative PCR and protein printing. Fluorescence microscope and flow cytometry were used to detect the glucose uptake capacity of ovarian granulosa cells in PCOS patients under the action of insulin after berberine., Results: In the PCOS group, IL-17a (P = 0.001), IL-1Ra (P<0.0001), and IL-6 (P = 0.035) were significantly higher than those in the non-PCOS group. In the non-PCOS group, AMH level was negatively correlated with inflammatory cytokines IL-17a (r = -0.819;P = 0.004), IL-1a (r = -0.716;P = 0.0.02), IL-1b (r = -0.678;P = 0.031), IL-2 (r = -0.765;P = 0.01), and IL-8 (r = -0.705;P = 0.023). However, in the PCOS group, AMH levels were not significantly correlated with the levels of the examined inflammatory cytokines. Berberine significantly reduced the expression level of mTOR mRNA (P = 0.001), and increased the expression level of IRS-1 mRNA (P = 0.009) in the PCOS granule cells., Conclusion: In this study, we find that the elevated levels of serum inflammatory factors IL-17a, IL-1Ra, and IL-6 cause women to be in a subclinical inflammatory state for a long time. Abnormal changes in inflammatory factors alter their original negative correlations with AMH levels, thereby weakening the metabolism of glycolipids, promoting insulin resistance, destroying the normal ovulation and fertilization system of women, leading to polycystic ovary syndrome characterized by menstrual thinning and abnormal ovulation. Berberine can improve the sensitivity of insulin by regulating the signal pathway of insulin receptor substrate-1 (IRS-1) and mammalian target of rapamycin (mTOR) in PCOS patients and achieve a therapeutic effect of treating PCOS., Competing Interests: The authors have declared that no competing interests exist.

Aim: To investigate whether treated hyperprolactinemia has an impact on pregnancy outcomes in in vitro fertilization/intracytoplasmic sperm injection-embryo transfer (IVF/ICSI-ET)., Methods: A retrospective cohort study was conducted on 535 women who underwent IVF/ICSI-ET between January 2012 and December 2016, of which 123 had treated hyperprolactinemia (case group), 369 were matched controls. Besides, 43 remained hyperprolactinemic after treatment consisted of abnormal group. Cumulative live birth rate (CLBR) after one oocyte retrieval cycle was taken as the primary outcome. A time-to-event analysis using Fine and Gray's test was used to compare CLBR between case and control groups., Results: The median prolactin level was 80.00 ng/mL before dopamine agonist treatment in case group, and it reduced to 14.80 ng/mL after the treatment, similar to the level of control group (15.17 ng/mL, P = 0.316). No significant differences in baseline characteristics were found between case and control groups. The CLBR after one oocyte retrieval cycle were 69.1% (85/123) and 66.4% (245/369) in the case group and control group, respectively (P = 0.580). No significant differences were found between case and control groups in perinatal outcomes. Pregnancy and perinatal outcomes of abnormal group were similar to those of case and control groups., Conclusion: Impact of treated hyperprolactinemia on CLBR and perinatal outcomes in IVF-ET was not evident., (© 2019 Japan Society of Obstetrics and Gynecology.)

This communication reports the synthesis of two novel chalcogen-atom-annulated perylene diimide (PDI) trimers with twisted structures, TriPDI-S and TriPDI-Se, for efficient nonfullerene polymer solar cells. TriPDI-Se exhibits more compact molecular arrangement due to the stronger intermolecular interactions induced by the selenium atom. This selenium annulation endows TriPDI-Se with improved absorption and crystallinity in its blend film. The resulting devices exhibit enhanced J sc of 17.15 mA cm -2 and fill factor (FF) of 66.8%, which are much higher than those of TriPDI-S devices (J sc = 16.71 mA cm -2 ; FF = 63.6%). Although TriPDI-Se exhibits lower-lying energy levels, TriPDI-Se devices still obtain a higher V oc of 0.77 V compared to TriPDI-S devices (V oc = 0.74 V), which is mainly originated from the reduced recombination in the related devices. Finally, the power conversion efficiency is significantly elevated from 7.86% for TriPDI-S devices to 8.82% for TriPDI-Se devices., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Background: White tea has received increasing attention of late as a result of its sweet taste and health benefits. During the brewing of white tea, many factors may affect the nutritional and sensory quality of the resulting infusions. The present study aimed to investigate the effect of various infusion conditions on the taste components of Fuding white tea, including infusion time, ratio of tea and water, number of brewing steps, and temperature., Results: Brewing conditions had a strong effect on the taste compound profile and sensory characteristics. The catechin, caffeine, theanine and free amino acid contents generally increased with increasing infusion time and temperature. Conditions comprising an infusion time of 7 min, a brewing temperature of 100 °C, a tea and water ratio of 1:30 or 1:40, and a second brewing step, respectively, were shown to obtain the highest contents of most compounds. Regarding tea sensory evaluation, conditions comprising an infusion time of 3 min, a brewing temperature of 100 °C, a tea and water ratio of 1:50, and a first brewing step, resulted in the highest sensory score for comprehensive behavior of color, aroma and taste., Conclusion: The results of the present study reveal differences in the contents of various taste compounds, including catechins, caffeine, theanine and free amino acids, with respect to different brewing conditions, and sensory scores also varied with brewing conditions. © 2016 Society of Chemical Industry., (© 2016 Society of Chemical Industry.)

A wide bandgap small molecular acceptor, SFBRCN, containing a 3D spirobifluorene core flaked with a 2,1,3-benzothiadiazole (BT) and end-capped with highly electron-deficient (3-ethylhexyl-4-oxothiazolidine-2-yl)dimalononitrile (RCN) units, has been successfully synthesized as a small molecular acceptor (SMA) for nonfullerene polymer solar cells (PSCs). This SMA exhibits a relatively wide optical bandgap of 2.03 eV, which provides a complementary absorption to commonly used low bandgap donor polymers, such as PTB7-Th. The strong electron-deficient BT and RCN units afford SFBRCN with a low-lying LUMO (lowest unoccupied molecular orbital) level, while the 3D structured spirobifluorene core can effectively suppress the self-aggregation tendency of the SMA, thus yielding a polymer:SMA blend with reasonably small domain size. As the results of such molecular design, SFBRCN enables nonfullerene PSCs with a high efficiency of 10.26%, which is the highest performance reported to date for a large bandgap nonfullerene SMA., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The aim of this study was to investigate the effect of water quality on the main components in Fuding white tea infusions, including catechins, caffeine, theanine and free amino acids. Pure, tap and spring water were tested, and water quality was found to have a distinct effect on the main compounds extracted. Pure water, which was weakly acidic and low in dissolved ions, achieved the highest catechin content, whereas caffeine and theanine, and amino acids, were higher in infusions made with spring and tap water, respectively. Sensory evaluation was performed to evaluate infusion colour, taste and aroma, and sensory quality was similarly influenced by water type, due primarily to differences in dissolved ions. Pure water was more suitable for brewing white tea with superior colour, aroma and taste.

A novel-small molecular acceptor with electron-deficient 1,3,5-triazine as the core and perylene diimides as the arms is developed as the acceptor material for efficient bulk heterojunction organic solar cells with an efficiency of 9.15%., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The aim of this work is to prepare and characterize curcumin-loaded methoxy poly(ethylene glycol)-poly(lactide) (mPEG-PLA)/D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) mixed micelles (CUR-MPP-TPGS-MMs), analyze the influence of formulation on enhancing the solubility of curcumin in water, and evaluate the improvement of intestinal absorption after oral administration. CUR-MPP-TPGS-MMs were prepared using the thin film diffusion method and optimized with the uniform design. The optimal CUR-MPP-TPGS-MMs were provided with high drug-loading (16.1%), small size (46.0 nm) and spherical shape. Low critical micelle concentration (CMC) and superior dilution stability showed that CUR-MPP-TPGS-MMs could keep integrity during the dilution of gastrointestinal fluid. In vitro drug release study indicated a sustained release of curcumin from CUR-MPP-TPGS-MMs in simulated gastrointestinal solution. The absorption mechanism of passive diffusion was obtained by measuring in situ intestinal absorption of CUR-MPP-TPGS-MMs in rats, and the best absorption segment was found to be the duodenum. The pharmacokinetics was evaluated in rats at the dose of 75 mg/kg by intragastric administration. The Cmax and mean retention time (MRT0-24) for CUR-MPP-TPGS-MMs were both increased, and the relative bioavailability of micelle formulation to curcumin suspension was 927.3%. These results suggested that mPEG-PLA/TPGS mixed micelle system (MPP-TPGS-MMs) showed great potential in improving oral bioavailability of curcumin., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Curcumin, a natural polyphenol compound, has been widely reported for diverse pharmacological effects and already been investigated for eye diseases. However, the water-insolubility of curcumin and the inherent penetration barriers in cornea make it difficult for curcumin to enter eye. This work aimed to develop ion-sensitive curcumin-loaded Pluronic P123 (P123)/D-a-tocopheryl polyethylene glycolsuccinate (TPGS) mixed micelle in situ gels (CUR-MM-ISGs) to prolong ocular retention time and improve cornea permeability. Central composite design-response surface methodology was applied for the optimization of curcumin-loaded P123/TPGS mixed micelles (CUR-MMs). Characterization tests showed that CUR-MMs were in spherical shape with small size and low critical micelle concentration. After dispersing the micelles in gellan gum solution (0.2%, w/w) at the ratio of 3:1 and 1:1 (v/v), respectively, CUR-MM-ISGs were formed and presented transparent appearance. Sustained release profile was obtained in vitro for both CUR-MM-ISGs (3:1 or 1:1, v/v). The irritation test proved that CUR-MM-ISGs as ophthalmic formulations were gentle and biocompatible towards ocular tissues. In addition, the ex vivo corneal penetration study indicated that the cumulative drug permeation amount of CUR-MM-ISGs (3:1, v/v) was respectively 1.16-fold and 1.32-fold higher than CUR-MM-ISGs (1:1, v/v) and curcumin solution. It can be concluded from these results that the developed ion-sensitive mixed micelle in situ gel system is a potential ophthalmic delivery carrier for curcumin as a poorly soluble drug., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Although curcumin (CUR) can inhibit proliferation and induce apoptosis of tumors, the poor water solubility restricted its clinical application. The aim of this study was to improve the aqueous solubility of CUR and make more favorable changes to bioactivity by preparing curcumin-loaded phospholipid-sodium deoxycholate-mixed micelles (CUR-PC-SDC-MMs). CUR-PC-SDC-MMs were prepared by the thin-film dispersion method. Based on the results of single factor exploration, the preparation technology was optimized using the central composite design-response surface methodology with drug loading and entrapment efficiency (EE%) as indicators. The images of transmission electron microscopy showed that the optimized CUR-PC-SDC-MMs were spherical and well dispersed. The average size of the mixed micelles was 66.5 nm, the zeta potential was about -26.96 mV and critical micelle concentration was 0.0087 g/l. CUR was encapsulated in PC-SDC-MMs with loading capacity of 13.12%, EE% of 87.58%, and the solubility of CUR in water was 3.14 mg/ml. The release results in vitro showed that the mixed micelles presented sustained release behavior compared to the propylene glycol solution of CUR. The IC50 values of CUR-loaded micelles and free drug in human breast carcinoma cell lines were 4.10 μg/ml and 6.93 µg/ml, respectively. It could be concluded from the above results that the CUR-PC-SDC-MMs system might serve as a promising nanocarrier to improve the solubility and bioactivity of CUR.

In this study, curcumin (Cur) loaded mixed micelles (Cur-PF), composed of Pluronic P123 (P123) and Pluronic F68 (F68), was prepared using the thin-film hydration method and evaluated in vitro. The preparation process was optimized with a central composite design (CCD). The average size of the mixed micelles was 68.2 nm, and the encapsulating efficiency for Cur was 86.93%, and 6.996% for drug-loading. Compared with the Cur propylene glycol solution, the in vitro release of Cur from Cur-PF presented the sustained-release property. The in vitro cytotoxicity assay showed that the IC(50) values on MCF-7 cells for Cur-PF and free Cur in DMSO solution were 5.04 μg/mL and 8.35 μg/mL, while 2.52 μg/mL and 8.27 μg/mL on MCF-7/ADR cells. It could be concluded from the results that P123/F68 mixed micelles might serve as a potential nanocarrier to improve the solubility and biological activity of Cur., (Copyright © 2012 Elsevier B.V. All rights reserved.)