Search

Prosthetic technology has advanced with the development of powered prostheses to enhance joint function and movement in the absence of native anatomy. However, there are no powered solutions available for hip-level amputees, and most existing hip prostheses are mounted to the front of the prosthetic socket, thereby limiting range of motion. This research introduces a novel laterally mounted powered hip joint (LMPHJ) that augments user movement. The LMPHJ is mounted on the lateral side of the prosthetic socket, positioning the hip joint closer to the anatomical center of rotation while ensuring user safety and stability. The motor and electronics are located in the thigh area, maintaining a low profile while transmitting the required hip moment to the mechanical joint center of rotation. A prototype was designed and manufactured, and static testing was complete by modifying the loading conditions defined in the ISO 15032:2000 standard to failure test levels for a 100 kg person, demonstrating the joint's ability to withstand everyday loading conditions. Functional testing was conducted using a prosthesis simulator that enabled able-bodied participants to successfully walk with the powered prosthesis on level ground. This validates the mechanical design for walking and indicates the LMPHJ is ready for evaluation in the next phase with hip disarticulation amputee participants., Competing Interests: The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article., (© The Author(s) 2024.)

The collection and analysis of data play a critical role in detecting and diagnosing faults in bearings. However, the availability of large open-access rolling-element bearing datasets for fault diagnosis is limited. To overcome this challenge, the University of Ottawa Rolling-element Bearing Vibration and Acoustic Fault Signature Datasets Operating under Constant Load and Speed Conditions are introduced to provide supplementary data that can be combined or merged with existing bearing datasets to increase the amount of data available to researchers. This data utilizes various sensors such as an accelerometer, a microphone, a load cell, a hall effect sensor, and thermocouples to gather quality data on bearing health. By incorporating vibration and acoustic signals, the datasets enable both traditional and machine learning-based approaches for rolling-element bearing fault diagnosis. Furthermore, this dataset offers valuable insights into the accelerated deterioration of bearing life under constant loads, making it an invaluable resource for research in this domain. Ultimately, these datasets deliver high quality data for the detection and diagnosis of faults in rolling-element bearings, thereby holding significant implications for machinery operation and maintenance., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors. Published by Elsevier Inc.)

Purpose: This study designs and provides a pilot evaluation of a novel surrogate lower limb (SLL) that provides anatomically realistic three-dimensional (3D) foot motion, based on a literature consensus of passive lower limb motion. This SLL is intended to replace single axis surrogates currently used in mechanical testing of ankle-foot orthoses (AFO)., Material and Methods: The SLL design is inspired by the Rizzoli foot model, with shank, hindfoot, midfoot, forefoot, and toe sections. Ball and socket joints were used between hindfoot-midfoot (HM)-forefoot sections. Forefoot-toes used a hinge joint. Three-dimensional printed nylon, thermoplastic polyurethane (TPU) and polylactic acid (PLA), as well as casted silicone rubber were used to re-create foot components. After fabrication, motion capture was performed to measure rotation using fiducial markers. The SLL was then loaded under both static and cyclic loads representing a 100 kg person walking for 500,000 cycles., Results: Most joints were within 5° of target angles. The SLL survived static loads representing 1.5 times body weight for both static and cyclical loading., Conclusions: This SLL moved as designed and survived testing loads, warranting further investigation towards enabling essential mechanical testing for AFO currently on the market, and helping to guide device prescription., Competing Interests: The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article. The authors report no conflicts of interest., (© The Author(s) 2022.)

Composite prosthetic sockets are typically made of fiberglass or carbon fiber. These fibers have good mechanical properties, but relatively poor vibration damping. Flax fibers are claimed to have exceptional vibration damping properties, with the added benefit of being a natural renewable resource and a cost-effective alternative to synthetic fibers. Flax fibers could prove beneficial for prosthetic sockets, providing lightweight sockets that reduce vibrations transmitted to the body during movement. This research used impact testing (impulse hammer and custom drop tower) on flat and socket shaped composite samples to evaluate composite layer options. Sample vibration dissipation was measured by a combination of accelerometers, load cells, and a dynamometer. Composite sockets made purely of flax fibers were lighter and more efficient at damping vibrations, reducing the amplification of vibrations by a factor of nearly four times better than sockets made purely of carbon fiber. However, the bending stiffness, elastic moduli, and flexural strength of flax sockets fabricated using the traditional socket manufacturing method were found to be ten times lower than theoretical values of flax composites found in the literature. By increasing fiber volume fraction when using the traditional socket manufacturing method, the composite's mechanical properties, namely, vibration damping, could improve and flax fiber benefits could be explored further., (Copyright © 2021 by ASME.)

The experimental study of vibrating plates having simply-supported boundary conditions can be difficult to achieve due to the complexity of preventing translation, but allowing rotation along all boundaries simultaneously. Only a few methods have been proposed, but all are either time-consuming to set up and involve customization of the test rig for each plate or do not allow the plate to be reused for other purposes. The method described in this paper offers a low-cost, simple, accurate and non-destructive way of experimentally measuring the modal properties of thin, simply supported plates and can be used for quick validations of models and designs without modification for multiple trials and varying plate properties. The key attributes of this method include: •An adjustable sliding support frame which can be made of a distinct material from the plate and which can accommodate variations in plate geometry and properties without modification.•Removable flexible sealant applied in a v-groove on the supporting frame which can be easily used to fix and support the plate according to the simply-supported boundary conditions.•A low-profile design, which can be used to accommodate most experimental testing methods for determining modal properties of vibrating plates., (© 2019 The Authors.)

Coiled polymer actuators are fabricated by heating a twisted nylon fishing filament. This paper provides a detailed review of their manufacturing process and proposes a method to manufacture these actuators consistently to improve the predictability of their behavior. Two devices are presented: a device that prepares consistent filament sections, and another that twists and coils the filament. Seven successful actuators are produced using the proposed method. The behavior of the manufactured actuators is characterized using a tensile test on an Instron universal testing machine. Fluctuations in the observed force are believed to be due to inconsistencies in resistance wire lengths.

Natural muscles have many favorable characteristics including their high power-to-weight ratio, efficient energy conversion and fast actuation times. These factors become important criteria for judging artificial actuation methods. Unfortunately, traditional systems such as pneumatic and electromagnetic motors have yet to attain similar characteristics. In recent years, a new category of actuators has been developed from highly twisted and coiled low-cost nylon fibers. These muscles are capable of providing a powerful stroke per cycle with a reversible contraction. In this paper, twisted and coiled polymer (TCP) actuators with two different commercially available nylon fibers: Shieldex conductive yarn 117/17 and 235/34 are fabricated and tested, then implemented into a low profile, hand exoskeleton. Maintaining quality control on muscle fabrication proved to be challenging and the use of nylon as muscle actuators for exoskeletons would require much more research and better measurements of critical parameters before providing a consistent solution.

An inverse eigenvalue problem approach to system design is considered. The Cayley-Hamilton theorem is developed for the general case involving the generalized eigenvalue vibration problem. Since many solutions exist for a desired frequency spectrum, a discussion of the required design information and suggestions for including structural constraints are given. An algorithm for solving the inverse eigenvalue design problem using the generalized Cayley-Hamilton theorem is proposed. A method for solving partially described systems is also specified. The Cayley-Hamilton theorem algorithm is shown to be a good design tool for solving inverse eigenvalue problems of mechanical and structural systems.

Although many improvements in the manufacturing of guitars have been made recently, one aspect that has often been overlooked is that of the acoustical consistency of the final manufactured product. The aim of this paper is to create a better understanding of the effect of a brace on the frequencies of vibration of the brace-soundboard system. This paper seeks to shed light on why a luthier 'tunes' braces when a guitar soundboard is hand-manufactured. A simple analytical model of a rectangular brace and soundboard is derived from first principles using Kirchhoff plate theory in order to develop insight into the effect of the soundboard's stiffness and brace thickness on the frequencies of the combined system. Natural frequencies and modeshapes of the combined system are calculated via the assumed shape method. Results show that by adjusting the thickness of the brace in order to compensate for the stiffness of the plate, one of the natural frequencies of the combined system can be adjusted to meet a desired value. However, simultaneously adjusting several natural frequencies cannot be done with a rectangular brace. Therefore modifications to the shape of the brace are explored.