Search

Blue mussels (Mytilus edulis L. 1758) are important components of coastal ecosystems and in the economy of rural and coastal areas. The understanding of their physiological processes at key life stages is important both within food production systems and in the management of wild populations. Lipids are crucial molecules for bivalve growth, but their diversity and roles have not been fully characterised. In this study, traditional lipid profiling techniques, such as fatty acid (FA) and lipid class analysis, are combined to untargeted lipidomics to elucidate the lipid metabolism in newly settled spat fed on a range of diets. The evaluated diets included single strains treatments (Cylindrotheca fusiformis CCAP 1017/2 -CYL, Isochrysis galbana CCAP 927/1- ISO, Monodopsis subterranean CCAP 848/1 -MONO, Nannochloropsis oceanica CCAP 849/10- NANNO) and a commercial algae paste (SP). Spat growth was influenced by the diets, which, according to their efficacy were ranked as follows: ISO>NANNO/CYL>SP>MONO. A higher triacylglycerols (TG) content, ranging from 4.23±0.82 μg mgashfree Dry weight (DW)-1 at the beginning of the trial (T0) to 51±15.3 μg mgashfreeDW-1 in ISO, characterised significant growth in the spat, whereas, a reduction of TG (0.3±0.08 μg mgashfreeDW-1 in MONO), mono unsaturated FA-MUFA (from 8.52±1.02 μg mgFAashfreeDW-1 at T0 to 2.81±1.02 μg mgFAashfreeDW-1 in MONO) and polyunsaturated FA-PUFA (from 17.57±2.24 μg mgFAashfreeDW-1 at T0 to 6.19±2.49 μg mgFAashfreeDW-1 in MONO) content characterised poor performing groups. Untargeted lipidomics evidenced how the availability of dietary essential PUFA did not influence only neutral lipids but also the membrane lipids, with changes in lipid molecular species in relation to the essential PUFA provided via the diet. Such changes have the potential to affect spat production cycle and their ability to respond to the surrounding environment. This study evidenced the advantages of coupling different lipid analysis techniques, as each technique disclosed relevant information on nutritional requirements of M. edulis juveniles, expanding the existing knowledge on the physiology of this important species., Competing Interests: The authors have declared that no competing interests exist.

Effectively negating the deleterious impact of marine biofouling on the world's maritime fleet in an environmentally conscientious manner presents a difficult challenge due to a variety of factors including the complexity and diversity of fouling species and the differing surface adhesion strategies. Understanding how surface properties relate to biofouling can inform and guide the development of new antibiofouling coatings to address this challenge. Herein, we report on the development of a living photopolymerization strategy used to tailor the surface properties of silicone rubber using controlled anisotropic poly(acrylamide) patterns and the resulting antibiofouling efficacy of these surfaces against zoospores of the model marine fouling organism, Ulva linza . Chemical patterns were fabricated using reversible addition-fragmentation chain-transfer (RAFT) living polymerization in conjunction with photolithography. Pattern geometries were inspired by the physical (i.e., nonchemical) Sharklet engineered microtopography system that has been shown to be effective against the same model organism. Sharklet chemical patterns and analogous parallel channels were fabricated in sizes ranging from 2 to 10 μm in the lateral dimension with tailorable feature heights ranging from tens to hundreds of nanometers. Nonpatterned, chemically grafted poly(acrylamide) silicone surfaces inhibited algal spore attachment density by 59% compared to the silicone control; however, attachment density on chemical nanotopographies was not statistically different from the control. While these results indicate that the chemical nanotopographies chosen do not represent an effective antibiofouling coating, it was found that the Sharklet pattern geometry, when sized below the 5 μm critical attachment size of the spores, significantly reduced the algal spore density compared to the equally sized channel geometry. These results indicate that specific chemical geometry of the proper sizing can impact the behavior of the algal spores and could be used to further study the mechanistic behavior of biofouling organisms.

There is currently strong motivation due to ecological concerns to develop effective anti-biofouling coatings that are environmentally benign, durable, and stable for use by the maritime industry. The antifouling (AF) and fouling-release (FR) efficacy of amphiphilic, charged copolymers composed of ~52% acrylamide, ~34% acrylic acid, and ~14% methyl acrylate grafted to poly(dimethyl siloxane) (PDMSe) surfaces were tested against zoospores of the green alga Ulva linza and the diatom Navicula incerta. The biofouling response to molecular weight variation was analyzed for grafts ranging from ~100 to 1,400 kg mol -1 , The amphiphilic coatings showed a marked improvement in the FR response, with a 55% increase in the percentage removal of diatoms and increased AF efficacy, with 92% reduction in initial attachment density of zoospores, compared to PDMSe controls. However, graft molecular weight, in the range tested, was statistically insignificant. Grafting copolymers to PDMSe embossed with the Sharklet™ microtopography did not produce enhanced AF efficacy.

The effect of incorporation of silicone oils into a siloxane-polyurethane fouling-release coatings system was explored. Incorporation of phenylmethyl silicone oil has been shown to improve the fouling-release performance of silicone-based fouling-release coatings through increased interfacial slippage. The extent of improvement is highly dependent upon the type and composition of silicone oil used. The siloxane-polyurethane (SiPU) coating system is a tough fouling-release solution, which combines the mechanical durability of polyurethane while maintaining comparable fouling-release performance with regard to commercial standards. To further improve the fouling-release performance of the siloxane-PU coating system, the use of phenylmethyl silicones oils was studied. Coatings formulations were prepared incorporating phenylmethyl silicone oils having a range of compositions and viscosities. Contact angle and surface energy measurements were conducted to evaluate the surface wettability of the coatings. X-ray photoelectron spectroscopy (XPS) depth profiling experiments demonstrated self-stratification of silicone oil along with siloxane to the coating-air interface. Several coating formulations displayed improved or comparable fouling-release performance to commercial standards during laboratory biological assay tests for microalgae (Navicula incerta), macroalgae (Ulva linza), adult barnacles (Balanus amphitrite syn. Amphibalanus amphitrite), and mussels (Geukensia demissa). Selected silicone-oil-modified siloxane-PU coatings also demonstrated comparable fouling-release performance in field immersion trials. In general, modifying the siloxane-PU fouling-release coatings with a small amount (1-5 wt % basis) of phenylmethyl silicone oil resulted in improved performance in several laboratory biological assays and in long-term field immersion assessments.

Mixed titania/silica xerogels were prepared using titanium tetraisopropoxide (TTIP) and tetraethoxy orthosilicate (TEOS). Xerogel properties were modified by incorporating n-octyltriethoxysilane (C8). The xerogels catalyze the oxidation of bromide and chloride with hydrogen peroxide (H2O2) to produce hypohalous acids at pH 7 and pH 8. The antifouling/ fouling-release performance of a TTIP/C8/TEOS xerogel in the presence and absence of H2O2 was evaluated for the settlement of zoospores of the marine alga Ulva linza and for the removal of sporelings (young plants). In the absence of H2O2, differences in the settlement of zoospores and removal of sporelings were not significant relative to a titanium-free C8/TEOS xerogel. Addition of H2O2 gave a significant reduction in zoospore settlement and sporeling removal relative to the C8/TEOS xerogel and relative to peroxide-free conditions. The impact of TTIP on xerogel characteristics was evaluated by comprehensive contact angle analysis, scanning electron microscopy, and X-ray photoelectron spectroscopy.