Search

Terahertz (THz) wireless communication holds immense potential to revolutionize future 6G to XG networks with high capacity, low latency and extensive connectivity. Efficient THz beamformers are essential for energy-efficient connections, compensating path loss, optimizing resource usage and enhancing spectral efficiency. However, current beamformers face several challenges, including notable loss, limited bandwidth, constrained spatial coverage and poor integration with on-chip THz circuits. Here we present an on-chip broadband THz topological beamformer using valley vortices for waveguiding, splitting and perfect isolation in waveguide phased arrays, featuring 184 densely packed valley-locked waveguides, 54 power splitters and 136 sharp bends. Leveraging neural-network-assisted inverse design, the beamformer achieves complete 360° azimuthal beamforming with gains of up to 20 dBi, radiating THz signals into free space with customizable user-defined beams. Photoexciting the all-silicon beamformer enables reconfigurable control of THz beams. The low-loss and broadband beamformer enables a 72-Gbps chip-to-chip wireless link over 300 mm and eight simultaneous 40-Gbps wireless links. Using four of these links, we demonstrate point-to-4-point real-time HD video streaming. Our work provides a complementary metal-oxide-semiconductor-compatible THz topological photonic integrated circuit for efficient large-scale beamforming, enabling massive single-input multiple-output and multiple-input and multiple-output systems for terabit-per-second 6G to XG wireless communications., (© 2024. The Author(s), under exclusive licence to Springer Nature Limited.)

Photonic diplexers are being widely investigated for high data transfer rates in on-chip communication. However, dividing the available spectrum into nonoverlapping multicarrier frequency sub-bands has remained a challenge in designing frequency-selective time-invariant channels. Here, an on-chip topological diplexer is reported exhibiting terahertz frequency band filtering through Klein tunneling of topological edge modes. The silicon topological diplexer chip facilitates two high-speed channels with quadrature amplitude modulation (QAM) over a broad bandwidth of 12.5 GHz each. These channels operate at carrier frequencies of 305 and 321.6 GHz, achieving a combined diplexer capacity of 150 Gbit s -1 . To ensure minimal interference between adjacent channels, a guard band is implemented. Topologically protected edge modes suppress the frequency selective fading of the broadband signals and hold promise for diverse integrated photonic applications spanning terahertz and telecommunication realms, including the design of lossless topological multiplexers, interconnects, antennas, and modulators for the sixth to X generation (6G to XG) wireless., (© 2024 Wiley‐VCH GmbH.)

The high-contrast-grating waveplates utilizing high contrast between silicon and air refractive indexes were developed in order to perform as a quarter wave and a half wave plate in the selected THz frequency range. The waveplates possessed anti-reflective properties due to the specific inclination of the walls both in parallel and in perpendicular direction to grating axis, efficiently suppressing the reflection losses caused by air-dielectric interface for both transverse magnetic and transverse electric polarizations. Moreover, significant reduction of the transmittance gap was achieved between both polarizations while mitigating overall Fabry-Perot effect. Validation of the concepts was carried out by measuring transmission amplitude and phase spectra of the fabricated samples in a broadband of THz time-domain spectroscopy and vector-network-analysis systems considering also some real applications.

We present a robust approach to generate a continuously tunable, low phase noise, Hz linewidth and mHz/s stability THz emission in the 0.1 THz to 1.4 THz range. This is achieved by photomixing two commercial telecom, distributed feedback lasers locked by optical-feedback onto a single highly stable V-shaped optical cavity. The phase noise is evaluated up to 1.2 THz, demonstrating Hz-level linewidth. To illustrate the spectral performances and agility of the source, low pressure absorption lines of methanol and water vapors have been recorded up to 1.4 THz. In addition, the hyperfine structure of a water line at 556.9 GHz, obtained by saturation spectroscopy, is also reported, resolving spectral features displaying a full-width at half-maximum of 10 kHz. The present results unambiguously establish the performances of this source for ultra-high resolution molecular physics., (© 2023. The Author(s).)

The topological phase revolutionized wave transport, enabling integrated photonic interconnects with sharp light bending on a chip. However, the persistent challenge of momentum mismatch during intermedium topological mode transitions due to material impedance inconsistency remains. We present a 100-Gbps topological wireless communication link using integrated photonic devices that conserve valley momentum. The valley-conserved silicon topological waveguide antenna achieves a 12.2-dBi gain, constant group delay across a 30-GHz bandwidth and enables active beam steering within a 36° angular range. The complementary metal oxide semiconductor-compatible valley-conserved devices represent a major milestone in hybrid electronic-photonic-based topological wireless communications, enabling terabit-per-second backhaul communication, high throughput, and intermedium transport of information carriers, vital for the future of communication from the sixth to X generation.

Background and Objectives: Hepatocellular carcinoma epidemiological data are limited in France. The Epidemio Liver Immunotherapy Tecentriq outcome research (ELITor) retrospective study, based on real-world data from the Carcinome HépatocellulaIrE en France (CHIEF) French cohort of hepatocellular carcinoma patients, aimed to get insight into the treatment patterns, the sociodemographic, clinical, biological, and etiological characteristics, and the quality of life of patients with unresectable hepatocellular carcinoma., Methods and Results: Between 1 September 2019 and 4 December 2020, 367 patients from the CHIEF cohort received at least one locoregional (52.8%) chemoembolization or radioembolization or systemic treatment (88.3%) and were selected for ELITor. Most patients had a Barcelona Clinic Liver Cancer (BCLC) C (93.2%) hepatocellular carcinoma stage and were affected by cirrhosis (67.7%). Alcohol was confirmed as the main etiology both as a single etiology (29.1%) and in association with other risk factors (26.9%), mainly metabolic disorders (16.2%).Tyrosine-kinase inhibitors, mainly sorafenib, were the most administered systemic treatments in first line. Patients who received at least one combination of atezolizumab and bevacizumab during the study period ( N  = 53) had a better performance status and less portal hypertension frequency than the overall population and more hepatitis B virus infection and fewer metabolic disorders as single etiology. Overall, the global health score before treatment (62.3 ± 21.9) was in line with that of reference cancer patients and worsened in 51.9% of the cases after first-line palliative-intent treatment., Conclusion: This study provided real-life data on advanced hepatocellular carcinoma characteristics and treatment patterns and described the first patients to receive the atezolizumab-bevacizumab combination before it became the new standard of care for advanced hepatocellular carcinoma., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

The revolutionary 5G cellular systems represent a breakthrough in the communication network design to provide a single platform for enabling enhanced broadband communications, virtual reality, autonomous driving, and the internet of everything. However, the ongoing massive deployment of 5G networks has unveiled inherent limitations that have stimulated the demand for innovative technologies with a vision toward 6G communications. Terahertz (0.1-10 THz) technology has been identified as a critical enabler for 6G communications with the prospect of massive capacity and connectivity. Nonetheless, existing terahertz on-chip communication devices suffer from crosstalk, scattering losses, limited data speed, and insufficient tunability. Here, we demonstrate a new class of phototunable, on-chip topological terahertz devices consisting of a broadband single-channel 160 Gbit/s communication link and a silicon Valley Photonic Crystal based demultiplexer. The optically controllable demultiplexing of two different carriers modulated signals without crosstalk is enabled by the topological protection and a critically coupled high-quality (Q) cavity. As a proof of concept, we demultiplexed high spectral efficiency 40 Gbit/s signals and demonstrated real-time streaming of uncompressed high-definition (HD) video (1.5 Gbit/s) using the topological photonic chip. Phototunable silicon topological photonics will augment complementary metal oxide semiconductor (CMOS) compatible terahertz technologies, vital for accelerating the development of futuristic 6G and 7G communication era driving the real-time terabits per second wireless connectivity for network sensing, holographic communication, and cognitive internet of everything., (© 2022. The Author(s).)

Rapid scaling of semiconductor devices has led to an increase in the number of processor cores and integrated functionalities onto a single chip to support the growing demands of high-speed and large-volume consumer electronics. To meet this burgeoning demand, an improved interconnect capacity in terms of bandwidth density and active tunability is required for enhanced throughput and energy efficiency. Low-loss terahertz silicon interconnects with larger bandwidth offer a solution for the existing inter-/intrachip bandwidth density and energy-efficiency bottleneck. Here, a low-loss terahertz topological interconnect-cavity system is presented that can actively route signals through sharp bends, by critically coupling to a topological cavity with an ultrahigh-quality (Q) factor of 0.2 × 10 6 . The topologically protected large Q factor cavity enables energy-efficient optical control showing 60 dB modulation. Dynamic control is further demonstrated of the critical coupling between the topological interconnect-cavity for on-chip active tailoring of the cavity resonance linewidth, frequency, and modulation through complete suppression of the back reflection. The silicon topological cavity is complementary metal-oxide-semiconductor (CMOS)-compatible and highly desirable for hybrid electronic-photonic technologies for sixth (6G) generation terahertz communication devices. Ultrahigh-Q cavity also paves the path for designing ultrasensitive topological sensors, terahertz topological integrated circuits, and nonlinear topological photonic devices., (© 2022 Wiley-VCH GmbH.)

Dielectric waveguides are capable of confining and guiding terahertz waves along sub-wavelength sized structures. A small feature size allows for a denser integration of different photonic components such as modulators, beam-splitters, wavelength (de)multiplexers and more. The integration of components on a small scale requires bending of the waveguides. In this paper we demonstrate a very short silicon 90°-bend, based on total internal reflection on an elliptically curved outer facet and a rounding of the inner corner joining two waveguides, with an average loss of 0.14 dB per bend in the 600-750 GHz range.

Additive manufacturing is a promising tool for the rapid prototyping of terahertz metamaterials at low-cost. In this letter, a terahertz metamaterial is fabricated using a microplotter system on a flexible polyimide film. The limits of the rapid prototyping technique is investigated both experimentally and numerically in order to determine the spectral range accessible by the fabricated metamaterials. Here, the metamaterial is composed of four arrays of metal-insulator-metal (MIM) antennas exhibiting a Fabry Perot resonance at frequencies from 0.25 to 0.8 THz. From a structural analysis of the printed antennas, we determined that the printing resolution is limited to about 5 μm. The arrays are analyzed by terahertz time-domain spectroscopy (THz-TDS). The good agreement between THz-TDS measurements and numerical simulations showed that the microplotter system can be used for rapid prototyping by adjusting a limited number of fabrication parameters.

The development of components for terahertz wireless communications networks has become an active and growing research field. However, in most cases these components have been studied using a continuous or broadband-pulsed terahertz source, not using a modulated data stream. This limitation may mask important aspects of the performance of the device in a realistic system configuration. We report the characterization of one such device, a frequency multiplexer, using modulated data at rates up to 10 gigabits per second. We also demonstrate simultaneous error-free transmission of two signals at different carrier frequencies, with an aggregate data rate of 50 gigabits per second. We observe that the far-field spatial variation of the bit error rate is different from that of the emitted power, due to a small nonuniformity in the angular detection sensitivity. This is likely to be a common feature of any terahertz communication system in which signals propagate as diffracting beams not omnidirectional broadcasts.There is growing interest in the development of components to facilitate wireless communications in the terahertz but the characterization of these systems involve an unmodulated input. Here the authors demonstrate multiplexing and demultiplexing of data streams in the terahertz range using a real data link.

We propose a reliable method for stabilizing narrow linewidth Brillouin fiber lasers with non-resonant pumping. Mode-hopping is suppressed by means of a phase-locked loop that locks the pump-Stokes detuning to a local radio-frequency (RF) oscillator. Stable single-mode operation of a 110-m-long Brillouin fiber laser oscillating at 1.55 μm is demonstrated for several hours. The beat note between two independent Stokes waves presents a phase noise level of -60  dBc/Hz at 100 Hz with a -20  dB/decade slope, and a FWHM linewidth lower than 50 Hz.

Frequency combs have enabled significant progress in frequency metrology and high-resolution spectroscopy extending the achievable resolution while increasing the signal-to-noise ratio. In its coherent mode, synchrotron radiation is accepted to provide an intense terahertz continuum covering a wide spectral range from about 0.1 to 1 THz. Using a dedicated heterodyne receiver, we reveal the purely discrete nature of this emission. A phase relationship between the light pulses leads to a powerful frequency comb spanning over one decade in frequency. The comb has a mode spacing of 846 kHz, a linewidth of about 200 Hz, a fractional precision of about 2 × 10(-10) and no frequency offset. The unprecedented potential of the comb for high-resolution spectroscopy is demonstrated by the accurate determination of pure rotation transitions of acetonitrile.

We demonstrate an integrated distributed feedback (DFB) laser array as a dual-wavelength source for narrowband terahertz (THz) generation. The laser array is composed of four heterogeneously integrated III-V-on-silicon DFB lasers with different lengths enabling dual-mode lasing tolerant to process variations, bias fluctuations, and ambient temperature variations. By optical heterodyning the two modes emitted by the dual-wavelength DFB laser in the laser array using a THz photomixer composed of an uni-traveling carrier photodiode (UTC-PD), a narrow and stable carrier signal with a frequency of 0.357 THz is generated. The central operating frequency and the emitted terahertz wave linewidth are analyzed, along with their dependency on the bias current applied to the laser diode and ambient temperature.

Thanks to a portable dual-frequency Brillouin fiber laser and a 1.55 μm photomixer, we report the generation of a highly coherent kilohertz level submillimeter wave emission. Low-cost telecommunications components are used to achieve very simple source architecture. The photomixer is composed of a unitravelling carrier photodiode integrated with an antenna. An emission at 316 GHz is observed and analyzed thanks to heterodyne detection with a signal-to-noise ratio >65 dB and a ~1 kHz linewidth. The phase noise of the proposed source has the same performance at 1.7 and 316 GHz. We show that this source has comparable or better phase noise compared to electrical oscillators and the tunability is much wider., (© 2011 Optical Society of America)

A review is provided of sources and detectors that can be employed in the THz range before the description of an opto-electronic source of monochromatic THz radiation. The realized spectrometer has been applied to gas phase spectroscopy. Air-broadening coefficients of HCN are determined and the insensitivity of this technique to aerosols is demonstrated by the analysis of cigarette smoke. A multiple pass sample cell has been used to obtain a sensitivity improvement allowing transitions of the volatile organic compounds to be observed. A solution to the frequency metrology is presented and promises to yield accurate molecular line center measurements.