Search

Aims: Osteogenesis imperfecta (OI) is a collagen I-related heritable family of skeletal diseases associated to extreme bone fragility and deformity. Its classical forms are caused by dominant mutations in COL1A1 and COL1A2, which encode for the protein α chains, and are characterized by impairment in collagen I structure, folding, and secretion. Mutant collagen I assembles in an altered extracellular matrix affecting mineralization and bone properties and partially accumulating inside the cells, leading to impaired trafficking and cellular stress. Recently, the chemical chaperone 4-phenylbutyrate (4-PBA) has been proposed as an innovative drug for OI based on its ability to restore intracellular homeostasis, stimulate secretion, and ameliorate collagen-producing cell functions, positively affecting bone properties. However, the limited half-life of the molecule represents a serious hurdle for its use., Materials and Methods: To efficiently target cellular stress as OI treatment, two new compounds were designed by molecular modelling based on the 4-PBA structure to increase its stability and its ability to implement protein secretion. The short butyryl fatty acid chain of 4-PBA was substituted with a nitro functional group or with a glycine, respectively. The latter, N-benzyl glycine (N-BG), showed the best docking score, less toxicity, and higher stability than 4-PBA., Key Findings: N-BG improved extracellular matrix quality and mineral content together with ameliorating OI cells' homeostasis by increasing ER-associated degradation pathway, reducing apoptosis, and stimulating protein secretion, thus facilitating intracellular clearance from accumulated misfolded proteins., Significance: In conclusion, N-BG represents a novel potential available compound to target altered homeostasis in OI with the aim to ameliorate the disease phenotype., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Convenient, rapid, highly sensitive and on-site iron determination is important for environmental safety and human health. We developed a sensing system for the detection of Fe(III) in water based on 7-mercapto-4-methylcoumarine (MMC)-stabilized silver-coated gold nanostars (GNS@Ag@MMC), exploiting a redox reaction between the Fe(III) cation and the silver shell of the nanoparticles, which causes a severe transformation of the nanomaterial structure, reverting it to pristine GNSs. This system works by simultaneously monitoring changes in the Localized Surface Plasmon Resonance (LSPR) and Surface-Enhanced Raman Spectroscopy (SERS) spectra as a function of added Fe(III). The proposed sensing system is able to detect the Fe(III) cation in the 1.0 × 10 -5 -1.5 × 10 -4 M range, and its selectivity of the GNS@Ag@MMC sensor toward iron has been verified monitoring the LSPR and the SERS response to other cations with a clear selectivity toward Fe(III).

Aluminum garnets display exceptional adaptability in incorporating mismatching elements, thereby facilitating the synthesis of novel materials with tailored properties. This study explored Ce 3+ -doped Tb 3 Al 5-x Sc x O 12 crystals (where x ranges from 0.5 to 3.0), revealing a novel approach to control luminescence and photoconversion through atomic size mismatch engineering. Raman spectroscopy confirmed the coexistence of garnet and perovskite phases, with Sc substitution significantly influencing the garnet lattice and induced A 1g mode softening up to Sc concentration x = 2.0. The Sc atoms controlled sub-eutectic inclusion formation, creating efficient light scattering centers and unveiling a compositional threshold for octahedral site saturation. This modulation enabled the control of energy transfer dynamics between Ce 3+ and Tb 3+ ions, enhancing luminescence and mitigating quenching. The Sc admixing process regulated luminous efficacy (LE), color rendering index (CRI), and correlated color temperature (CCT), with adjustments in CRI from 68 to 84 and CCT from 3545 K to 12,958 K. The Ce 3+ -doped Tb 3 Al 5-x Sc x O 12 crystal (where x = 2.0) achieved the highest LE of 114.6 lm/W and emitted light at a CCT of 4942 K, similar to daylight white. This approach enables the design and development of functional materials with tailored optical properties applicable to lighting technology, persistent phosphors, scintillators, and storage phosphors.

Self-standing Na 3 MnTi(PO 4 ) 3 /carbon nanofiber (CNF) electrodes are successfully synthesized by electrospinning. A pre-synthesized Na 3 MnTi(PO 4 ) 3 is dispersed in a polymeric solution, and the electrospun product is heat-treated at 750 °C in nitrogen flow to obtain active material/CNF electrodes. The active material loading is 10 wt%. SEM, TEM, and EDS analyses demonstrate that the Na 3 MnTi(PO 4 ) 3 particles are homogeneously spread into and within CNFs. The loaded Na 3 MnTi(PO 4 ) 3 displays the NASICON structure; compared to the pre-synthesized material, the higher sintering temperature (750 °C) used to obtain conductive CNFs leads to cell shrinkage along the a axis. The electrochemical performances are appealing compared to a tape-casted electrode appositely prepared. The self-standing electrode displays an initial discharge capacity of 124.38 mAh/g at 0.05C, completely recovered after cycling at an increasing C-rate and a coulombic efficiency ≥98%. The capacity value at 20C is 77.60 mAh/g, and the self-standing electrode exhibits good cycling performance and a capacity retention of 59.6% after 1000 cycles at 1C. Specific capacities of 33.6, 22.6, and 17.3 mAh/g are obtained by further cycling at 5C, 10C, and 20C, and the initial capacity is completely recovered after 1350 cycles. The promising capacity values and cycling performance are due to the easy electrolyte diffusion and contact with the active material, offered by the porous nature of non-woven nanofibers.

The NASICON-structured Na 3 MnZr(PO 4 ) 3 compound is a promising high-voltage cathode material for sodium-ion batteries (SIBs). In this study, an easy and scalable electrospinning approach was used to synthesize self-standing cathodes based on Na 3 MnZr(PO 4 ) 3 loaded into carbon nanofibers (CNFs). Different strategies were applied to load the active material. All the employed characterization techniques (X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), thermal gravimetric analysis (TGA), and Raman spectroscopy) confirmed the successful loading. Compared to an appositely prepared tape-cast electrode, Na 3 MnZr(PO 4 ) 3 /CNF self-standing cathodes demonstrated an enhanced specific capacity, especially at high C-rates, thanks to the porous conducive carbon nanofiber matrix. Among the strategies applied to load Na 3 MnZr(PO 4 ) 3 into the CNFs, the electrospinning (vertical setting) of the polymeric solution containing pre-synthesized Na 3 MnZr(PO 4 ) 3 powders resulted effective in obtaining the quantitative loading of the active material and a homogeneous distribution through the sheet thickness. Notably, Na 3 MnZr(PO 4 ) 3 aggregates connected to the CNFs, covered their surface, and were also embedded, as demonstrated by TEM and EDS. Compared to the self-standing cathodes prepared with the horizontal setting or dip-drop coating methods, the vertical binder-free electrode exhibited the highest capacity values of 78.2, 55.7, 38.8, 22.2, 16.2, 12.8, 10.3, 9.0, and 8.5 mAh/g at C-rates of 0.05C, 0.1C, 0.2C, 0.5C, 1C, 2C, 5C, 10C, and 20C, respectively, with complete capacity retention at the end of the measurements. It also exhibited a good cycling life, compared to its tape-cast counterpart: it displayed higher capacity retention at 0.2C and 1C, and, after cycling 1000 cycles at 1C, it could be further cycled at 5C, 10C, and 20C.

Scientific and industrial reasons dictate the study of the solid state of imepitoin, a highly safe and tolerable anticonvulsant drug used in the therapy of epileptic dogs that was approved in the Europe Union in 2013. Our investigations allowed us to discover the existence of a new polymorph of imepitoin, which finds itself in a monotropic relationship with the crystalline form (polymorph I) already known and present on the market. This form (polymorph II), obtained by crystallization from xylene, remains metastable under ambient conditions for at least 1 year. Both solid forms were characterized by thermal (DSC and TGA), spectroscopic (FT-IR and Raman), microscopic (SEM and HSM), and diffractometric techniques. The thermodynamic relationship between the two polymorphs (monotropic) is such that it is not possible to study the melting of polymorph II, not even by adopting appropriate experimental strategies. Our measurements highlighted that the melting peak of imepitoin actually also includes an onset of melt decomposition. The ab initio structure solution, obtained from synchrotron X-ray powder diffraction data collected at room temperature, allowed us to determine the crystal structure of the new polymorph (II). It crystallizes in the monoclinic crystal structure, P2 1 / c space group (#14), with a = 14.8687(6) Å, b = 7.2434(2) Å, c = 12.5592(4) Å, β = 107.5586(8)°, V = 1289.61(8) Å3, and Z = 4.

Chiral perovskites possess a huge applicative potential in several areas of optoelectronics and spintronics. The development of novel lead-free perovskites with tunable properties is a key topic of current research. Herein, we report a novel lead-free chiral perovskite, namely (R/S-)ClMBA 2 SnI 4 (ClMBA=1-(4-chlorophenyl)ethanamine) and the corresponding racemic system. ClMBA 2 SnI 4 samples exhibit a low band gap (2.12 eV) together with broad emission extending in the red region of the spectrum (∼1.7 eV). Chirality transfer from the organic ligand induces chiroptical activity in the 465-530 nm range. Density functional theory calculations show a Rashba type band splitting for the chiral samples and no band splitting for the racemic isomer. Self-trapped exciton formation is at the origin of the large Stokes shift in the emission. Careful correlation with analogous lead and lead-free 2D chiral perovskites confirms the role of the symmetry-breaking distortions in the inorganic layers associated with the ligands as the source of the observed chiroptical properties providing also preliminary structure-property correlation in 2D chiral perovskites., (© 2024 Wiley-VCH GmbH.)

A straightforward method to prepare surface enhanced Raman spectroscopy (SERS) chips containing a monolayer of silver coated gold nanostars (GNS@Ag) grafted on a glass surface is introduced. The synthetic approach is based on a seed growth method performed directly on surface, using GNS as seeds, and involving a green pathway, which only uses silver nitate, ascorbic acid and water, to grow the silver shell. The preparation was optimized to maximize signals obtaining a SERS response of one order of magnitude greater than that from the original GNS based chips, offering in the meantime good homogeneity and acceptable reproducibility. The proposed GNS@Ag SERS chips are able to detect pesticide thiram down to 20 ppb., (Creative Commons Attribution license.)

Handly and easy-to-use optical instrumentation is very important for food safety monitoring, as it provides the possibility to assess law and health compliances at every stage of the food chain. In particular, the Surface-enhanced Raman Scattering (SERS) method appears highly promising because the intrinsic drawback of Raman spectroscopy, i.e., the natural weakness of the effect and, in turn, of the signal, is overcome thanks to the peculiar interaction between laser light and plasmonic excitations at the SERS substrate. This fact paved the way for the widespread use of SERS sensing not only for food safety but also for biomedicine, pharmaceutical process analysis, forensic science, cultural heritage and more. However, the current technological maturity of the SERS technique does not find a counterpart in the recognition of SERS as a routine method in compliance protocols. This is mainly due to the very scattered landscape of SERS substrates designed and tailored specifically for the targeted analyte. In fact, a very large variety of SERS substrates were proposed for molecular sensing in different environments and matrices. This review presents the advantages and perspectives of SERS sensing in food safety. The focus of the survey is limited to specific analytes of interest for producers, consumers and stakeholders in Oltrepò Pavese, a definite regional area that is located within the district of Pavia in the northern part of Italy. Our attention has been addressed to (i) glyphosate in rice fields, (ii) histamine in a world-famous local product (wine), (iii) tetracycline, an antibiotic often detected in waste sludges that can be dangerous, for instance in maize crops and (iv) Sudan dyes-used as adulterants-in the production of saffron and other spices, which represent niche crops for Oltrepò. The review aims to highlight the SERS performance for each analyte, with a discussion of the different methods used to prepare SERS substrates and the different reported limits of detection.

The development of broadband emitters based on metal halide perovskites (MHPs) requires the elucidation of structure-emission property correlations. Herein, we report a combined experimental and theoretical study on a series of novel low-dimensional lead chloride perovskites, including ditopic aromatic cations. Synthesized lead chloride perovskites and their bromide analogues show both narrow and broad photoluminescence emission properties as a function of their cation and halide nature. Structural analysis shows a correlation between the rigidity of the ditopic cations and the lead halide octahedral distortions. Density functional theory calculations reveal, in turn, the pivotal role of octahedral distortions in the formation of self-trapped excitons, which are responsible for the insurgence of broad emission and large Stokes shifts together with a contribution of halide vacancies. For the considered MHP series, the use of conventional octahedral distortion parameters allows us to nicely describe the trend of emission properties, thus providing a solid guide for further materials design.

ZnS-graphene composites (ZnSGO) were synthesized by a hydrothermal process and loaded onto carbon nanofibers (CNFs) by electrospinning (ZnS-GO/CNF), to obtain self-standing anodes for SIBs. The characterization techniques (XRPD, SEM, TEM, EDS, TGA, and Raman spectroscopy) confirm that the ZnS nanocrystals (10 nm) with sphalerite structure covered by the graphene sheets were successfully synthesized. In the ZnS-GO/CNF anodes, the active material is homogeneously dispersed in the CNFs' matrix and the ordered carbon source mainly resides in the graphene component. Two self-standing ZnS-GO/CNF anodes (active material amount: 11.3 and 24.9 wt%) were electrochemically tested and compared to a tape-casted ZnS-GO example prepared by conventional methods (active material amount: 70 wt%). The results demonstrate improved specific capacity at high C-rate for the free-standing anodes compared to the tape-casted example (69.93 and 92.59 mAh g -1 at 5 C for 11.3 and 24.9 wt% free-standing anodes, respectively, vs. 50 mAh g -1 for tape-casted). The 24.9 wt% ZnS-GO/CNF anode gives the best cycling performances: we obtained capacities of 255-400 mAh g -1 for 200 cycles and coulombic efficiencies ≥ 99% at 0.5 C, and of 80-90 mAh g -1 for additional 50 cycles at 5 C. The results suggest that self-standing electrodes with improved electrochemical performances at high C-rates can be prepared by a feasible and simple strategy: ex situ synthesis of the active material and addition to the carbon precursor for electrospinning.

Surface-enhanced Raman scattering (SERS) is becoming widely used as an analytical tool, and the search for stable and highly responsive SERS substrates able to give ultralow detection of pollutants is a current challenge. In this paper we boosted the SERS response of Gold nanostars (GNS) demonstrating that their coating with a layer of silver having a proper thickness produces a 7-fold increase in SERS signals. Glass supported monolayers of these GNS@Ag were then prepared using simple alcoxyliane chemistry, yielding efficient and reproducible SERS chips, which were tested for the detection of molecules representative of different classes of pollutants. Among them, norfloxacin was detected down to 3 ppb, which is one of the lowest limits of detection obtained with this technique for the analyte.

Low-cost and simple methods are constantly chased in order to produce less expensive lithium-ion batteries (LIBs) while possibly increasing the energy and power density as well as the volumetric capacity in order to boost a rapid decarbonization of the transport sector. Li alloys and tin-carbon composites are promising candidates as anode materials for LIBs both in terms of capacity and cycle life. In the present paper, electrospinning was employed in the preparation of Sn/SnO x @C composites, where tin and tin oxides were homogeneously dispersed in a carbonaceous matrix of carbon nanofibers. The resulting self-standing and light electrode showed a greatly enhanced performance compared to a conventional electrode based on the same starting materials that are simply mixed to obtain a slurry then deposited on a Cu foil. Fast kinetics were achieved with more than 90% of the reaction that resulted being surface-controlled, and stable capacities of about 300 mAh/g over 500 cycles were obtained at a current density of 0.5 A/g.

Crystalline films of lead-free all-inorganic Cs 3 Bi 2 X 9 (X = Br, I) perovskites have been deposited by radio frequency (RF)-magnetron sputtering providing high-quality, single-phase films as confirmed by structural, morphological, and optical property characterization. Progressive tuning of crystal structure characteristics and optical absorbance has been achieved in mixed Br/I phases Cs 3 Bi 2 (I 1- x Br x ) 9 (0 ≤ x ≤ 1), highlighting a shift of the band gap from about 2.0 eV for Cs 3 Bi 2 I 9 to 2.64 eV for Cs 3 Bi 2 Br 9 . X-ray diffraction and Raman scattering allowed defining the range of alloyed compositions where single-phase compositions are found. Finally, preliminary photocatalytic activity tests on the degradation of methylene blue provided solid data indicating the future possible exploitation of Bi-based perovskite derivative materials as active photocatalysts.

Spinel phases, with unique and outstanding physical properties, are attracting a great deal of interest in many fields. In particular, MgFe 2 O 4 , a partially inverted spinel phase, could find applications in medicine thanks to the remarkable antibacterial properties attributed to the generation of reactive oxygen species. In this paper, undoped and Ag-doped MgFe 2-x Ag x O 4 (x = 0.1 and 0.3) nanoparticles were prepared using microwave-assisted combustion and sol-gel methods. X-ray powder diffraction, with Rietveld structural refinements combined with micro-Raman spectroscopy, allowed to determine sample purity and the inversion degree of the spinel, passing from about 0.4 to 0.7 when Ag was introduced as dopant. The results are discussed in view of the antibacterial activity towards Escherichia coli and Staphylococcus aureus , representative strains of Gram-negative and Gram-positive bacteria. The sol-gel particles were more efficient towards the chosen bacteria, possibly thanks to the nanometric sizes of metallic silver, which were well distributed in the powders and in the spinel phase, with respect to microwave ones, that, however, acquired antibacterial activity after thermal treatment, probably due to the nucleation of hematite, itself displaying well-known antibacterial properties and which could synergistically act with silver and spinel.

The osseointegration of titanium implants is allowed by the TiO 2 layer that covers the implants. Titania can exist in amorphous form or in three different crystalline conformations: anatase, rutile and brookite. Few studies have characterized TiO 2 covering the surface of dental implants from the crystalline point of view. The aim of the present study was to characterize the evolution of the TiO 2 layer following different surface treatments from a crystallographic point of view. Commercially pure titanium and Ti-6Al-4V implants subjected to different surface treatments were analyzed by Raman spectroscopy to evaluate the crystalline conformation of titania. The surface treatments evaluated were: machining, sandblasting, sandblasting and etching and sandblasting, etching and anodization. The anodizing treatment evaluated in this study allowed to obtain anatase on commercially pure titanium implants without altering the morphological characteristics of the surface.

The adhesion and proliferation of bacteria on abiotic surfaces pose challenges in both health care and industrial applications. Gold nanostars (GNSs) monolayers grafted on glass have demonstrated to exert antibacterial action due to their photo-thermal features. Here, these GNS layers were further functionalized using thiols monolayers, in order to impart different wettability to the surfaces and thus adding a feature that could help to fight bacterial proliferation. Thiol that has different functional groups was used and the thiol-protected surfaces were characterized by means of UV-vis spectroscopy, contact angles, SEM and surface enhanced Raman spectroscopy (SERS). We verified that (i) coating with the proper thiol allows us to impart high hydrophilicity or hydrophobicity to the surfaces (with contact angle values ranging from 10 to 120°); (ii) GNS monolayers are strongly stabilized by functionalization with thiols, with shelf stability increasing from a few weeks to more than three months and (iii) photo-thermal features and subsequent antibacterial effects caused by hyperthermia are not changed by thiols layers, allowing us to kill at least 99.99% of representative bacterial strains.

We prepared and characterized recyclable surface enhanced Raman spectroscopy (SERS) active glass chips. Gold nanostars were grafted on properly functionalized glasses by means of electrostatic interactions and then they were coated with a silica layer of controllable thickness in the nanometer range. The SERS activity of the obtained substrates were tested in terms of reproducibility and homogeneity intra-samples and inter-samples from different batches using the Raman reporter as the model compound rhodamine 6G. The uncoated substrates were used as reference to evaluate the effect of silica spacers on SERS enhancement factors (EFs). The chemical route to obtain silica-coated SERS chips is described in detail, and the morphology and the optical response of substrates have been characterized. We demonstrate that SERS substrates coated with 1 nm silica conserve a good EF, and that the coating confers to the SERS platform an extreme robustness leading to reusability of the substrates.

In the present work, we show a successful approach to achieve stable structural and optical changes induced by pressure on bulk amounts of MAPI after pressure release. Such effects on the optical properties resemble those achieved in situ (e.g., in diamond anvil cells) but are retained and stabilized under ambient conditions thanks to a partial quenching of the high-pressure state.

FeNb11O29 is an intriguing and promising material that has been emerging in the last few years. It is isostructural with Nb12O29, one of the rare compounds in which Nb displays a local magnetic moment and shows both antiferromagnetic ordering and metallic conductivity at low temperatures. Both the two polymorphic monoclinic and orthorhombic forms have a mono-dimensional magnetic arrangement, but the different disposition of the structural building blocks leads to a strong frustration phenomenon of the magnetic order in the high-temperature orthorhombic form. Whereas Nb12O29 has been widely studied, barely few magnetic data can be found on its analogous FeNb11O29, for which a role of the Fe3+ localized d electrons in affecting the original magnetic behaviour can be foreseen. In this paper, we report how we synthesized undoped and, for the first time, Mn- and V-doped FeNb11O29. Both the monoclinic and orthorhombic polymorphs, stable in different temperature ranges, were then thoroughly structurally characterized. With the help of micro-Raman spectroscopy, we investigated the differences introduced into the vibrational levels by doping, while EPR data allowed us to obtain information on the transition metal ions and to point out the related peculiar structural features. Static magnetization measurements evidenced the paramagnetic character of the compounds and the high-spin configuration of Fe3+ ions.

Objectives:: To evaluate the geometric distortion of tilting of mandibular third molars with respect to second molars on panoramic reconstruction., Methods:: Cone-beam CT (CBCT) reconstructions of 160 third molars, obtained due to an indication of risk of inferior alveolar nerve damage during surgery, were used. CBCT-reconstructed panoramic images were used as bi-dimensional (2D) images, to avoid distortions other than geometric distortions. The angle between the second and the third molar was measured in 2D and three-dimensional (3D) images. Student's t-test was used to assess the null-hypothesis of no difference between 2D and 3D measurements., Results:: A significant mean difference (-2.3° ± 6.3°) between 2D and 3D measurements was found, with an absolute error of 3.6° ± 5.7° and a relative error of 10%. These findings comprehensively explain the geometric distortion on panoramic radiographs., Conclusions:: Although a widely used and undoubtedly useful tool for diagnosis and surgical planning of mandibular third molar extractions, panoramic reconstruction are biased from geometric distortion that may influence surgical planning.

The last decade has come across an increasing demand for theranostic biocompatible nanodevices possessing the double ability of diagnosis and therapy. In this work, we report the design, synthesis and step-by-step characterization of rationally coated gold nanostars (GNSs) for the SERS imaging and photothermal therapy of HeLa cancer cells. The nanodevices were realized by synthesizing GNSs with a seed growth approach, coating them with a controlled mixture of thiols composed of a Raman reporter and a polyethylene glycol with a terminal amino group, and then reacting these amino groups with folic acid (FA), in order to impart selectivity towards cancer cells which overexpress folate receptors on their membranes. After a complete characterization, we demonstrate that these FA-functionalized GNSs (FA-GNSs) are able to bind selectively to the membranes of HeLa cells, acting as SERS tags and allowing SERS imaging. Moreover, we demonstrate that once bound to HeLa cell membranes, FA-GNSs exhibit photothermal effect which can be exploited to kill the same cells in vitro using laser irradiation in the NIR at a very low and safe irradiance. We thus demonstrate that the FA-GNSs designed following the described approach are an efficient prototype of theranostic nanodevices.

Surface modification of noble metal nanoparticles with mixed molecular monolayers is one of the most powerful tools in nanotechnology, and is used to impart and tune new complex surface properties. In imaging techniques based on surface enhanced Raman spectroscopy (SERS), precise and controllable surface modifications are needed to carefully design reproducible, robust and adjustable SERS nanoprobes. We report here the attainment of SERS labels based on gold nanostars (GNSs) coated with a mixed monolayer composed of a poly ethylene glycol (PEG) thiol (neutral or negatively charged) that ensure stability in biological environments, and of a signalling unit 7-Mercapto-4-methylcoumarin as a Raman reporter molecule. The composition of the coating mixture is precisely controlled using an original method, allowing the modulation of the SERS intensity and ensuring overall nanoprobe stability. The further addition of a positively charged layer of poly (allylamine hydrocloride) on the surface of negatively charged SERS labels does not change the SERS response, but it promotes the penetration of GNSs in SH-SY5Y neuroblastoma cells. As an example of an application of such an approach, we demonstrate here the internalization of these new labels by means of visualization of cell morphology obtained with SERS mapping.

Encapsulated Fe3O4 nanoparticles of average diameters d = 12 nm are obtained by coprecipitation, in the presence of 2-methoxyethanol hemiester of poly(maleic anhydride-alt-butyl vinyl ether) 5% grafted with poly(ethylene glycol) (VP-MAG nanoparticles). A complete characterization of nude and encapsulated nanoparticles through structural techniques (namely XRD, TEM, SEM), Raman spectroscopy and magnetic measurements has been performed. These nanoparticles compared with commercial compounds (ENDOREM®) present superparamagnetic behavior and nuclear relaxivities that make them promising as magnetic resonance imaging (MRI) contrast agents (CAs). We found that our nanostructures exhibit r2 relaxivity higher than those of commercial CAs over the whole frequency range. The MRI efficiency of our samples was related to their microstructural and magnetic properties.

Multi-walled carbon nanotubes (MWCNTs) were grafted for the first time by γ-radiation onto silica microspheres in the presence of polybutadiene (PB) as the linking agent, obtaining a novel hybrid material with chromatographic properties, with an alternative approach to the existing procedures. The synthesis involves the one-pot γ-radiation-induced grafting of MWCNTs onto silica microspheres in the presence of PB as a linking agent. PB also serves as a coating layer of the silica particles, to which MWCNTs are anchored through stable chemical bonds formed via radical chain reaction with the polymer. The product (MWCNT-PB-modified silica) resulted in MWCNT bundles interlaying the silica particles which acted as a support and as a spacer. This new material highlights the unquestionable properties of CNTs also when grafted in a composite, thus allowing the disposition of a more robust material whose properties are still related to the nanotube structure. The grafting was confirmed by Raman spectroscopy. The surface area, determined by BET isotherms, resulted in 132 m(2) g(-1), about 34% lower than that of pure silica, pointing to the cross-linking effect of PB in the silica matrix. The evaluation of MWCNT-PB-modified silica as a LC stationary phase was performed by separation of aromatics, with satisfactory resolution and reproducibility, while structural selectivity was proved by isomer separation. A good resolution was obtained also for acid/basic compounds as barbiturates. A comparison with a commercial C18 sorbent highlighted the advantage in using the CNT column for separating aromatic hydrocarbons. Control experiments on the PB-coated silica column proved the key role of MWCNTs in the chromatographic performance.

A detailed study of resonant photoemission at Ti L(2,3) edges of insulating rutile TiO(2-x) thin film is presented. Pure TiO(2) resonating structures, defect-related resonances, resonant Raman-Auger and normal LVV Auger emissions are tracked, including an unpredicted two-hole correlated satellite below the non-bonding part of the valence band. The analysis of excitation dynamics unambiguously addresses the origin of these features and, in particular, the extent of charge transfer effects on the Ti-O bonding in the valence band of rutile, disclosing further applications to the more general case of, formally, d(0) oxides.

Nanoparticles for biomedical use must be cytocompatible with the biological environment that they are exposed to. Current research has focused on the surface functionalization of nanoparticles by using proteins, polymers, thiols and other organic compounds. Here we show that inorganic nanoparticles such as titanium oxide can be coated by pyrolytic carbon (PyC) and that the coating has cytocompatible properties. Pyrolization and condensation of methane formed a thin layer of pyrolytic carbon on the titanium oxide core. The formation of the PyC shell retards coalescence and sintering of the ceramic phase. Our MTT assay shows that the PyC-coated particles are cytocompatible at employed doses.

As is well-known, the character of the π orbitals is of paramount importance for the chemical properties of the carbon allotropes and their derived compounds. While at equilibrium the nature of these orbitals is well understood, their photoinduced nonequilibrium behavior is under investigation. Here, we demonstrate that when a UV-laser pulse excites a carrier density larger than 10% of the π* density of state in graphite, a renormalization of the π-π* band gap takes place. This result has been achieved by detecting the transient reflectivity and the associated decay time of an infrared probe following the excitation of a UV pump pulse tuned across the π-π* absorption resonance. The pump photon energy at which both the transient reflectivity and the decay time are maximum is downshifted by 500 meV with respect to the relative absorption maximum at equilibrium. This finding is interpreted as a transient π-π* band gap shrinking of similar magnitude, near the M point of the Brillouin zone.

We report a facile strategy to obtain multiwalled carbon nanotubes (MWCNTs) functionalized with covalently bonded lysozyme. The functionalization procedure has been investigated by means of several techniques, including thermogravimetry, Raman spectroscopy, transmission electron microscopy, and cyclic voltammetry. A functionalization of about 1 lysozyme molecule every 4000 carbon atoms is obtained. The modified lysozyme-CNTs nanocomposite shows a significant increase of the antibacterial activity towards the Gram-positive S. aureus if compared with lysozyme in solution.

Aim: We investigate the effect of four different types of sterilization procedures on the structural properties and morphological features of single-wall carbon nanotube samples approachable by micro-Raman spectroscopy. Sterilization procedures (treatment in humid heat autoclave or ethylene oxide and irradiation with gamma-rays or UV light) are necessary in view of the use of carbon nanotube sterile samples in in vivo toxicity tests on laboratory rats. Micro-Raman spectroscopy allows us to estimate several details about the morphology of the single-wall carbon nanotube mixture (mainly the presence of disorder and diameter distribution) before and after the sterilization treatment., Results: The best of these treatments, in other words, the one that least affected the morphology and structural properties of carbon nanotubes, was found to be UV irradiation and has thus been selected for future in vivo tests on rats.

Electronic excitations of condensed phase eumelanin aggregates are investigated with soft X-ray spectroscopies. Resonant photoemission data indicate that mechanisms of charge delocalization may occur when electrons are excited about 3 eV above the first unoccupied electronic level. An average, lower limit value of 1.6 fs was estimated for the lifetime of the excited C 1s-pi* states.

Pure and doped Ba(6)Ti(2)Nb(8)O(30) (BTN), obtained by substituting M = Cr, Mn, or Fe on the Ti site (Ba(6)Ti(2-x) M(x)Nb(8)O(30), x = 0.06 and 0.18) and Y and Fe on the Ba and Ti sites, respectively (Ba(6-x)Y(x)Ti(2-x)Fe(x)Nb(8)O(30), x= 0.18), are synthesized. The influence of cation doping on the local structure, the cation oxidation state, and the possible defect formation able to maintain the charge neutrality are investigated by spectroscopic (electron paramagnetic resonance (EPR) and micro-Raman), structural (X-ray powder diffraction) and transport (impedance spectroscopy, thermoelectric power) measurements, in the temperature range of 300-1200 K in air and N(2) flow. Starting from the valence state of the doping ions (Fe(3+), Cr(3+), and Mn(2+)), determined by EPR, and from thermoelectric power measurements, evidencing a negative charge transport, different charge-compensating defect equilibria, based on the creation of positive electron holes or oxygen vacancies and electrons, are discussed to interpret the conductivity results.

Single crystals of TiO(2) rutile doped with Cr, Mn, Fe, Co, Ni, and Cu were grown with the flux method in a Na(2)B(4)O(7) melt. The samples, checked in their structural and phase homogeneity by x-ray diffraction and micro-Raman spectroscopy, were single-phase needle-shaped crystals several millimetres long. Paramagnetic and ferromagnetic behaviours at room temperature were observed and they are discussed also in connection with the magnetic properties of undoped TiO(2) crystals.

The room temperature cation occupancy in LiMgVO(4) and LiZnVO(4) crystallographic sites is obtained by means of the combined use of X-ray powder diffraction (XRPD), (7)Li and (51)V magic angle spinning nuclear magnetic resonance (MAS NMR), and micro-Raman measurements. In the LiMgVO(4) Cmcm orthorhombic structure, the 4c (C(2)(v) symmetry) tetrahedral vanadium site is fully ordered; on the contrary, the Li 4c tetrahedral site and the 4b (C(2)(h) symmetry) Mg octahedral site display about 22% of reciprocal cationic exchange. Higher cationic disorder is observed in LiZnVO(4): the three cations can distribute on the three tetrahedral and distinct sites of the R-3 structure. XRPD and MAS NMR analysis results highly agree for what concerns vanadium ion distribution on the three cationic sites (about 25, 26, and 47%). From the full profile fitting of XRPD patterns with the Rietveld method, it is also obtained that Li(+) displays a slightly preferred occupation of the T1 position (approximately 55%) and Zn(2+) of the T2 position (approximately 46%). The vibrational spectra of the two compounds are characterized by different peak positions and broadening of the Raman modes, reflecting the cation distribution and the local vibrational unit distortion. A comparison is also made with recent Raman results on Li(3)VO(4). High temperature XRPD measurements rule out possible structural transitions up to 673 K for both compounds.

This study deals with the effects of 5 and 10% chromium additions on the transport and structural properties of Li3VO4. The Cr substitution is easily obtained without impurity phases and does not affect the room- and high-temperature host crystal structure, as evidenced by X-ray powder diffraction and micro-Raman analysis. The EPR signals are interpreted in terms of quantified amounts of Cr ions in 5+ and 3+ valence states. Suitable 7Li and 51V MAS NMR spectra simulations agree with the EPR results about the relative amount of Cr5+ and Cr3+ ions substituted in V5+ and Li+ sites, respectively. The Cr3+ presence on Li site, also suggested by Raman results and Rietveld refinements, requires Li vacancies to maintain the charge neutrality. The p-type conductivity, suggested by the positive thermoelectric power coefficients, significantly increases by the cation doping up to an order of magnitude.