Search

Nacre mimetic coatings are attractive candidates for food packaging, electronics, textiles, protective insulation, and flame retardant materials. Inspired by the hierarchical structure of nacre, we present an environmentally friendly strategy to construct robust and flame retardant films using chitin, which is an abundantly available biopolymer. Chitin was phosphorylated to make it water-soluble. Multilayered films were constructed by assembling poly (vinyl alcohol) (PVA), graphene oxide (GO) nanosheets, phosphorylated chitin (p. chitin), and laponite (LAP) via Layer-by-Layer (LbL) and vacuum-assisted filtration (VAF) assemblies. SEM micrographs revealed the nacre-like layered structure while photographic images showed a similar sheen to that of the mother of pearl. The fabricated coatings possess good mechanical properties with a reduced modulus of 25.53 GPa and hardness of 1.45 GPa. In addition, multilayered films exhibited iridescence and attractive flame retardancy. We believe that our strategy of embedding chitin offers cost-effective and environmentally friendly coatings for textiles, food packaging, barrier, and electronic materials., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Triple action pollutant responsive multi-layer hybrid nanocoatings of architecture PEI(PAA/ZnO-Co 3 O 4 ) n were constructed through ZnO-Co 3 O 4 binary oxide co-precipitation followed by its inclusion in multi-layer polymeric thin films using Layer-by-Layer (LbL) deposition. Characterization of the designed architecture was carried out via FTIR, XRD, UV-Vis, and Raman spectroscopic studies to evaluate the chemical nature, bonding, and crystallographic behavior of ZnO-Co 3 O 4 . Peaks of ZnO-Co 3 O 4 were recorded at 586.38, 486.08, and 443.64 cm -1 while pronounced shifting of ZnO characteristic E 2 (high) peak ~ 450 cm -1 and appearance of modes around 495, 530, 630, and 719 cm -1 indexed via Raman studies validated Co 3 O 4 impregnation into ZnO structure. XRD patterns of ZnO-Co 3 O 4 compared to their previously reported pristine structures also justified the formation of binary oxide as unit composite. SEM micrographs confirmed homogenous multi-layered depositions while EDX analysis confirmed their uniform elemental distribution in the unit structure. Sequential multi-layer buildup up to 48 layer pairs was monitored using ellipsometry with maximum film thickness ~ 89 nm and by UV-Vis at 376 nm. The prepared thin films exhibited significant photodegradation of methylene blue ~ 91% and Cu (II) adsorption capacity ~ 89% within first 90 min of contact, along with prominent bactericidal efficiency against E. coli within 24 h of reaction time. FAAS, ICP-OES, and UV-Vis spectroscopy analyses make these multifunctional hybrid nanocoatings promising for industrial wastewater as well as drinking water purification setups. Furthermore, protuberant recycling and regenerative capacity make these hybrid nanocoatings an eco-friendly system for hydro-remediation., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The novel N-p-carboxy benzyl chitosan (CBC)/ poly (vinyl alcohol) (PVA) based mixed matrix membranes (MMMs) filled with surface-modified zeolite have been prepared using the dissolution casting technique. The applicability of prepared MMMs for direct methanol fuel cell (DMFC) was investigated in terms of water uptake, methanol permeation, and proton conductivity by changing filler content (10-50 wt. %). The zeolite was modified by silane coupling agent, 3-mercaptopropyltrimethoxysilane (MPTMS). The resultant modified zeolite (MZ) was incorporated into CBC/PVA blend to obtain mixed matrix PEMs. The functional group, structural properties, morphological and topographical investigation of MMMs were examined using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and Scanning electron microscopy (SEM) respectively. The prepared MMMs exhibited a remarkable decrease in methanol permeability of 2.3 × 10 -7  cm 2 /s with C-CPMZ50. The maximum value of proton conductivity of 0.0527 Scm -1 , was shown by C-CMPZ10. The prepared PEMs also displayed good stability during long term operating time., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Technological advancements and development of new materials may lead to the manufacture of sustainable energy-conducting devices used in the energy sector. This research attempts to fabricate novel electroconductive and mechanically stable nanocomposites via an electroless deposition (ELD) technique using electrically insulating materials. Metallic Cu is coated onto Al₂O₃ by ELD, and the prepared filler is then integrated (2-14 wt %) into a matrix of polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene-graft-maleic anhydride (PS- b -(PE- r -B)- b -PS- g -MA). Considerable variations in composite phases with filler inclusion exist. The Cu crystallite growth onto Al₂O₃ was evaluated by X-ray diffraction (XRD) analysis and energy dispersive spectrometry (EDS). Scanning electron microscopy (SEM) depicts a uniform Cu coating on Al₂O₃, while homogeneous filler dispersion is exhibited in the case of composites. The electrical behavior of composites is enhanced drastically (7.7 × 10 -5 S/cm) upon incorporation of Cu-Al₂O₃ into an insulating polymer matrix (4.4 × 10 -16 S/cm). Moreover, mechanical (Young's modulus, tensile strength and % elongation at break) and thermal (thermogravimetric analysis (TGA), derivative thermogravimetry (DTG), and differential scanning calorimetry (DSC)) properties of the nanocomposites also improve substantially. These composites are likely to meet the demands of modern high-strength electroconductive devices.