Search

Chloroform is among the most common solvents for root canal treatment. Despite its classification as a potential carcinogen, it is effective if used correctly. Inappropriate use can lead to severe complications, including persistent pain, gingival recession, and necessitating surgical intervention to resect necrotizing bone., Competing Interests: The authors declare that they have no conflict of interest., (© 2024 The Author(s). Clinical Case Reports published by John Wiley & Sons Ltd.)

Background: The present in vitro study aimed to evaluate the fatigue behavior of teeth filled with a calcium silicate-based sealer (Bio-C Sealer, BC) or an epoxy resin-based sealer (AH Plus, AH), in bulk or associated with gutta-percha as main core material., Methods: Seventy-two sound human maxillary anterior teeth were initially selected. Sixty of them, were randomly chosen, and had their root canals prepared using nickel-titanium reciprocating instruments, being again randomly assigned to five experimental groups ( n = 12): C+ (control + prepared but not filled); BC-B (BC in bulk); BC-GP (BC+ gutta-percha); AP-B (AH in bulk); AP-GP (AH+ gutta-percha). An additional negative control group (C-) was considered ( n = 12), consisting only on sound teeth, without preparation and filling. The specimens were submitted to a survival analysis after the cyclic fatigue test., Results: Sound teeth (C-) presented the best fatigue performance ( P < 0.05), being similar only to the AP-GP group ( P > 0.05). Despite that, all experimental groups showed similar fatigue behavior ( P > 0.05) to C+ (BC-B = BC-GP = AP-B = AP-GP = C+). Based on that, it can be seen that the use of gutta-percha, as a main core material, associated with the AH Plus sealer, reestablished the mechanical fatigue performance of endodontically treated teeth comparable to sound teeth, still consisting on the most promising approach to rehabilitate such scenario. Teeth filled in bulk, had discreetly higher risk of premature failures and inferior fatigue performance., Competing Interests: João Tribst is an Academic Editor for PeerJ., (© 2024 Lena et al.)

The cytotoxic effects of three root canal sealers with different bases on human dental pulp stem cells were assessed in this study using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) test. The cytotoxic effects of three root canal sealers with different bases on human dental pulp stem cells (DPSCs) were assessed in this study using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) test. The cytotoxicity of the sealers was tested after one, 4, and 7 d. Human dental pulp stem cell proliferation was concluded using an MTT assay. Cells not treated with sealer extract were used as controls. The absorption levels were measured using an Eliza spectrophotometer. P was set at 0.05 when the percentage of cell proliferation was matched between groups and observation times using one-way analysis of variance (ANOVA).During the second passage (P2), human dental pulp stem cells displayed a single morphological and phenotypic trait, with fibroblast morphology being the most common. There were no appreciable variations between the four groups after a day. There was a notable variation in the average percentage of cell proliferation between the groups after 4 and 7 days. The control group had the highest percentage, followed by the GuttaFlow Bioseal group, the Well Root St group, and the AH-Plus group, which had the lowest percentage. For every sealing group, after one day, the highest mean percentage of cell proliferation was recorded, followed by day four, and after day seven, the lowest mean percentage. The observation periods showed minimal cytotoxic effects of GuttaFlow Bioseal, whereas AH-Plus was the most cytotoxic to human dental pulp stem cells. The highest mean percentage of cell proliferation for all sealers was recorded on day one., (© 2024. The Author(s).)

Background: Root resorption is a complex problem in endodontic treatment that considerably affects the structural integrity of teeth. This study aims to assess the biomechanical efficacy of various restorative materials and approaches in treating external root resorption, emphasizing their capacity to improve stress resistance and guarantee long-term success., Methods: This research employed finite element analysis (FEA) to assess stress distribution in mandibular premolars with external root resorption. Eight models, demonstrating apical and mid-level resorption, were repaired using mineral trioxide aggregate (MTA), Biodentine, or a mixture of these materials with gutta-percha. In order to evaluate each technique's biomechanical performance, the models were exposed to both vertical and oblique stresses., Results: The findings demonstrated that complete canal obturation with Biodentine or MTA greatly lowered stress levels, with Biodentine exhibiting a marginal advantage. The hybrid approach utilizing gutta-percha produced elevated stress concentrations, especially under oblique loading conditions., Conclusion: MTA and Biodentine are effective in enhancing resistance to biomechanical forces in teeth with external resorption. However, the combination of gutta-percha with these materials reduces resistance, especially under oblique forces. These findings highlight the importance of material selection in restoring resorbed teeth and improving clinical outcomes., Competing Interests: Human subjects: All authors have confirmed that this study did not involve human participants or tissue. Animal subjects: All authors have confirmed that this study did not involve animal subjects or tissue. Conflicts of interest: In compliance with the ICMJE uniform disclosure form, all authors declare the following: Payment/services info: All authors have declared that no financial support was received from any organization for the submitted work. Financial relationships: All authors have declared that they have no financial relationships at present or within the previous three years with any organizations that might have an interest in the submitted work. Other relationships: All authors have declared that there are no other relationships or activities that could appear to have influenced the submitted work., (Copyright © 2024, Celebi et al.)

Introduction: Achieving success in root canal (RC) therapy relies on three key components: comprehensive cleaning of the canal, efficient disinfection, and proper filling of the canal space. The present study aimed to compare the efficacy of four obturation techniques: single cone (SC), GuttaCore (GC), cold lateral condensation (LC), and C Point system for RC filling of permanent teeth., Materials and Methods: 76 extracted human mandibular first premolars were divided into four groups, with 19 teeth in each group (group A, obturation with SC technique; group B, obturation with GC; group C, obturation with LC; and group D, obturation with C Point system). The samples were marked at 4 mm and 8 mm from the root apex using a marker and calliper, sectioned horizontally, and analyzed under a stereomicroscope at 20x magnification. The mean percentage (%) of gutta-percha (GP)-filled area was compared using a two-way analysis of variance (ANOVA), followed by the Bonferroni post-hoc test., Results: The mean percentage of GP-filled area at a distance of 4 mm from the apex was highest in group B (0.86±0.04; 95% CI: 0.845-0.881), followed by group D (0.70±0.07; 95% CI: 0.664-0.736), group A (0.61±0.05; 95% CI: 0.595-0.642), and least in group C (0.58±0.09; 95% CI: 0.543-0.627), and the difference was statistically significant (p≤0.05). The post-hoc pairwise comparison of groups at 4 mm revealed that there were statistically significant differences between group D and groups B, C, and A (p ≤ 0.001). The mean percentage of the GP area at a distance of 8 mm from the apex was highest in group B (0.81±0.10; 95% CI: 0.761-0.861), followed by group D (0.75±0.07; 95% CI: 0.725-0.792), group A (0.69±0.07; 95% CI: 0.658-0.729), and lowest in group C (0.65±0.10; 95% CI: 0.607-0.709), and this difference was statistically significant (p≤0.05). Post-hoc pairwise comparison of groups at 8 mm revealed that there was a statistically significant difference between groups D and C (p=0.006), whereas no statistically significant differences were noted between groups D and B (p=0.473). Furthermore, no statistically significant differences were noted between groups C and A at 4 mm and 8 mm (p>0.05)., Conclusion: Obturation with the GC system provided the best results in terms of the percentage of GP-filled area at 4 mm. However, at 8 mm from the apical region, both the GC and C Point systems provided similar results., Competing Interests: Human subjects: Consent was obtained or waived by all participants in this study. IEC-YOGITA DENTAL COLLEGE AND HOSPITAL,KHED issued approval EC/NEW/INST/2022/2512/2024-034. This in vitro experimental study was carried out in the Department of Conservative Dentistry and Endodontics with prior approval from the Institutional Ethical Committee (EC/NEW/INST/2022/2512/2024-034). The study adhered to the principles outlined in the Declaration of Helsinki and written informed consent was obtained from the patients to use their extracted tooth samples. Animal subjects: All authors have confirmed that this study did not involve animal subjects or tissue. Conflicts of interest: In compliance with the ICMJE uniform disclosure form, all authors declare the following: Payment/services info: All authors have declared that no financial support was received from any organization for the submitted work. Financial relationships: All authors have declared that they have no financial relationships at present or within the previous three years with any organizations that might have an interest in the submitted work. Other relationships: All authors have declared that there are no other relationships or activities that could appear to have influenced the submitted work., (Copyright © 2024, Chib et al.)

Methicillin-resistant Staphylococcus aureus (MRSA) is considered one of the most harmful bacteria to human health. Dentistry, like all healthcare disciplines, places great emphasis on preventing scenarios that may result in cross-infection. Although various tested and already used materials are suitable for filling the root canal system, Gutta-Percha (GP) remains the preferred and widely accepted gold standard., Objective: We performed an in vitro analysis of the contamination of GP points, regarding the strains of Methicillin-resistant (MRSA) and Methicillin-sensitive (MSSA) Staphylococcus aureus , using classical microbiology methods and molecular biology techniques., Methods: Gutta-Percha points of two different brands from opened packages (already in use for 1 month) were collected for analysis. The assessment involved incubating the GP points in Brain Heart Infusion (BHI) medium to detect microbial growth. Growing microorganisms were plated on a selective and differential chromogenic medium for MRSA/MSSA strains, and the identification of isolates was confirmed by Polymerase Chain Reaction (PCR). In the case of microbial growth, the GP point was submitted to a disinfection protocol., Results: From the 315 collected GP points, only 6 (1.9%) resulted in being positive for microbial growth. After confirmation by PCR, only one sample of the six GP points was contaminated by MRSA, and the remaining five were MSSA-contaminated. The disinfection protocol was effective in all contaminated GP points., Conclusions: The Gutta-Percha points from opened pre-sterilized packages showed a very low degree of contamination by MRSA/MSSA. However, the detection of MSSA and MRSA strains raises concerns about potential contamination in dental clinic environments, and this risk cannot be considered negligible.

Background: Gutta-percha is commonly used in endodontic therapy for obturating root canals after cleaning and shaping procedures. Warm and cold gutta-percha techniques are two common methods employed for obturation, each with its own advantages and limitations., Materials and Methods: Twenty extracted human teeth with single-rooted canals were selected and divided into two groups: warm gutta-percha obturation and cold gutta-percha obturation. In the warm gutta-percha group, gutta-percha was heated to a predetermined temperature using a warm gutta-percha heating device and injected into the root canal using a heated carrier. In the cold gutta-percha group, gutta-percha was applied directly to the root canal without prior heating. Root canal obturation quality was assessed using radiographic imaging to evaluate the presence of voids, completeness of obturation, and adaptation to the canal walls. Micro-computed tomography (micro-CT) analysis was also performed to quantify the volume of obturating material and assess the three-dimensional distribution of gutta-percha within the root canal space., Results: Both warm and cold gutta-percha techniques demonstrated effective obturation of root canals, with comparable outcomes in terms of void formation, completeness of obturation, and adaptation to canal walls. However, micro-CT analysis revealed differences in the volume and distribution of gutta-percha within the root canal space. Warm gutta-percha obturation exhibited more uniform distribution of gutta-percha material and higher volumetric filling compared to cold gutta-percha obturation. Additionally, the warm gutta-percha technique demonstrated superior flowability and adaptation to irregularities within the root canal system., Conclusion: In this in vitro study, warm gutta-percha obturation demonstrated advantages over cold gutta-percha obturation in terms of volumetric filling, distribution within the root canal space, and adaptation to canal irregularities., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Journal of Pharmacy and Bioallied Sciences.)

Objective: The purpose of this in vitro investigation was to assess the effectiveness of various gutta-percha retrieval methods in endodontic retreatment., Methods: Five groups were randomly allocated to extract human teeth that had already had root canal therapy: manual files, rotary tools, heat, solvents, and ultrasonics. By evaluating the amount of filling material still present, gutta-percha clearance was quantitatively examined, and root canal cleanliness was qualitatively appraised. To compare the effectiveness of retrieval approaches, statistical analysis was done., Findings: Hand files, heat, and solvents were less effective than rotary devices and ultrasonics at removing gutta-percha ( P < 0.05). A quantitative investigation showed that the groups using rotary instruments (0.87 mm) and ultrasonics (0.68 mm) had much less gutta-percha left. The qualitative evaluation revealed that rotary instruments (2.12) and ultrasonics (2.45) had greater cleaning ratings compared to other methods., Conclusion: In conclusion, gutta-percha can be effectively removed during endodontic retreatment by using rotary tools and ultrasonics, which provide both quantitative efficiency and qualitative purity. The implementation of sophisticated retrieval procedures to maximize treatment results in clinical practice is supported by these findings., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Journal of Pharmacy and Bioallied Sciences.)

The aim was to compare the effect of different endodontic surgical treatments on the stress distributions in dentin of a simulated first mandibular molar tooth using the finite element analysis method. Three surgical endodontic procedures (apical resection, root amputation, and hemisection) were simulated in a first mandibular molar. Biodentine or mineral-trioxide-aggregate was used to repair the surgery site in apical resection and root amputation models; the remaining root canal spaces were filled with gutta-percha. Access cavities were restored using resin composite. In hemisection model, root canal was filled with gutta-percha, and coronal restoration was finished with a monolithic zirconia crown. A sound tooth model was created as a control model. An oblique force of 300 N angled at 45° to the occlusal plane was simulated. Maximum von Mises stresses were evaluated in dentin near the surgery regions and the entire tooth. Apical resection/Biodentine and apical resection/mineral-trioxide-aggregate models generated maximum von Mises stresses of 39.001 MPa and 39.106 MPa, respectively. The recorded maximum von Mises stresses in root amputation models were 66.491 MPa for root amputation/Biodentine and 73.063 MPa for root amputation/mineral-trioxide-aggregate models. The highest maximum von Mises stress value among all models was observed in the hemisection model, measuring 138.87 MPa. Hemisection induced the highest von Mises stresses in dentin, followed by root amputation and apical resection. In apical resection, Biodentine and mineral-trioxide-aggregate did not show a significant difference in stress distribution. Biodentine in root amputation may lead to lower stresses compared to mineral-trioxide-aggregate., (© 2024. The Author(s).)

Herbal remedies have demonstrated remarkable effects as anti-diabetic, anticancer, antimicrobials, immunological modulatory agent in liver problems, respiratory illnesses, and as beauty agents. The need for more affordable, readily accessible, and alternative medicines has led to a rise in the recognition of herbal drugs. Therefore, it is of interest to evaluate and compare the effectiveness of photosensitized curcumin fibers, Aloevera, Amla Juice and Pancha Tulsi in disinfecting guttapercha (GP) cones. It was observed that all experimental disinfectants were found to have greater antimicrobial action than the positive control in which no disinfectant was used. The order of antimicrobial action among different experimental disinfectants against Staphylococcus aureus and Enterococcus faecalis in disinfection of GP cones was in following order PanchaTulsi>Curcumin fibers >Amla juice > Aloe vera. It was concluded that all herbal disinfectants were found to have antimicrobial effectiveness in disinfection of GP cones with Panchtulsi having maximum disinfectant ability followed by photosensitized curcumin fibres., (© 2024 Biomedical Informatics.)

Presently, there is a significant focus on the investigation and advancement of polymer-modified asphalt that is both high-performing and environmentally sustainable. This study thoroughly examined the performance and modification mechanism of gutta-percha (GP) as a novel asphalt modifier. The investigation was conducted using a combination of macro- and microscopic testing, as well as molecular dynamics simulations. This work primarily examined the compatibility of GP with asphalt molecular modeling. This paper used molecular dynamics to identify the most suitable mixing temperature. Next, the gray correlation theory was used to discuss the most effective method for preparing gutta-percha-modified asphalt (GPMA). The macro-rheological tests and microscopic performance analysis provided a full understanding of the impact of GP on asphalt properties and the process of alteration. The findings indicate that eucommia ulmoides gum (EUG) exhibits good compatibility with asphalt, while sulfur-vulcanized eucommia ulmoides gum (SEUG) does not demonstrate compatibility with asphalt. Both EUG and SEUG enhance the thermal stability and resistance to deformation of asphalt at high temperatures, with SEUG having a particularly notable effect. However, both additives do not improve the resistance of asphalt to cracking at low temperatures. The manufacturing method for EUG-modified asphalt (EUGMA) involves physical mixing, whereas sulfur-vulcanized eucommia ulmoides gum-modified asphalt (SEUGMA) involves physical mixing together with certain chemical processes. This research establishes a theoretical foundation for the advancement of GP as a novel environmentally friendly and highly effective asphalt modification.

Background: Gutta-percha (GP) combined with an endodontic sealer is still the core material most widely used for tridimensional obturation. The sealer acts as a bonding agent between the GP and the root dentinal walls. However, one of the main drawbacks of GP core material is the lack of adhesiveness to the sealer. ZnO thin films have many remarkable features due to their considerable bond strength, good optical quality, and excellent piezoelectric, antibacterial, and antifungal properties, offering many potential applications in various fields. This study aimed to explore the influence of GP surface's functionalization with a nanostructured ZnO thin film on its adhesiveness to endodontic sealers., Methods: Conventional GP samples were divided randomly into three groups: (a) Untreated GP (control); (b) GP treated with argon plasma (PT); (c) Functionalized GP (PT followed by ZnO thin film deposition). GP's surface functionalization encompassed a multi-step process. First, a low-pressure argon PT was applied to modify the GP surface, followed by a ZnO thin film deposition via magnetron sputtering. The surface morphology was assessed using SEM and water contact angle analysis. Further comprehensive testing included tensile bond strength assessment evaluating Endoresin and AH Plus Bioceramic sealers' adhesion to GP. ANOVA procedures were used for data statistical analysis., Results: The ZnO thin film reproduced the underlying surface topography produced by PT. ZnO thin film deposition decreased the water contact angle compared to the control (p < 0.001). Endoresin showed a statistically higher mean bond strength value than AH Plus Bioceramic (p < 0.001). There was a statistically significant difference between the control and the ZnO-functionalized GP (p = 0.006), with the latter presenting the highest mean bond strength value., Conclusions: The deposition of a nanostructured ZnO thin film on GP surface induced a shift towards hydrophilicity and an increased GP's adhesion to Endoresin and AH Bioceramic sealers., (© 2024. The Author(s).)

Objectives: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT)., Materials and Methods: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups., Results: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05)., Conclusions: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument., (© 2024. The Author(s).)

Introduction Non-surgical retreatment is seen as a conservative choice for dealing with recurrent infections, instead of opting for periapical surgery. The retreatment processes should be promptly and efficiently carried out, utilizing a suitable armamentarium. The objective of this experiment is to evaluate the quantity of root dentin that remains following the removal of gutta-percha (GP) from the root canal employing two distinct retreatment files. Materials and methods Sixty single-rooted teeth were selected for the examination. The process of shaping and cleaning was performed using the step-back approach, with a master apical file size of 40. The smear layer was effectively eliminated by rinsing with a solution of 3% sodium hypochlorite and 17% ethylenediaminetetraacetic acid. Paper points were employed to desiccate the canals. The obturation process involved the utilization of the lateral compaction technique with the AH Plus sealer (Dentsply Sirona, NC, USA). The teeth were classified into two groups: Group I (n=30) underwent retreatment using HyFlex Remover (Coletene India, Pvt., Ltd.), whereas Group II (n=30) received therapy with Solite RS3 retreatment files (Solite Dental in Chennai, India). The remaining dentin thickness (RDT) was assessed by cone beam computed tomography at levels 3, 6, and 9 mm from the cemento enamel junction after the removal of GP. The acquired data underwent examination using an independent t-test to determine statistical significance. Results The findings demonstrate that the utilization of Solite RS3 files led to a higher level of dentin thickness remaining at 3 mm, 6 mm, and 9 mm on the mesial side in comparison to HyFlex Remover retreatment files. The observed difference was found to be statistically significant at a significance level of p<0.05 on the mesial side. Nevertheless, there was no notable disparity seen between the two file types at these three levels on the distal side (p>0.05). Conclusion Based on the obtained results of the study, it can be concluded that Solite RS3 files show promise in preserving the RDT. However, further studies encompassing diverse parameters are needed to establish a conclusive and definitive conclusion., Competing Interests: Patent application number 202241008949 for Solite RS3 endodontic retreatment rotary file., (Copyright © 2024, Sankar et al.)

Background: Misconceptions should be detected early in dental students' training to improve their clinical performance. Accordingly, this study aimed to assess undergraduate dental students' knowledge and performance of master gutta-percha (GP) cone selection and fitting during clinical endodontic courses at the College of Dentistry, King Saud University., Methods: Ninety-nine undergraduate dental students completed an online survey about their knowledge of master GP cone selection. Forty-five of these students were observed by faculty members in clinical endodontic courses while they fitted master GP cones during root canal treatments. The observers recorded the details of each student's cone-fitting techniques. The data were analysed using t-tests, one-way analysis of variance, and chi-square tests (p < 0.05). Inter- and intra-observer reliability were tested using Fliess' Kappa., Results Survey: All participants had good knowledge of over-extended cone management, while 80.8% knew how to properly manage a short cone. The proper flaring assessment method was selected by 86.9% of the female and 34.2% of the male students, and this difference was statistically significant (p = 0.0001)., Observation: The students labelled the working length on the master GP cone with an indentation in 64.4% of the cases and by bending the cone 35.6% of the time. Of all students, 84.4% encountered an apical stop, and this rate correlated significantly with the length of the cone on the master apical cone radiograph (p = 0.001). Improper shaping of the canal was the most common cause of ill-fitting cones (83.3%), while 16.7% of the students chose the wrong cone size. The final obturation length was adequate in 80% of the cases; 57.8% of the students were helped by instructors., Conclusions: Most students had the basic knowledge required to solve problems related to the selection of master GP cones. However, in the clinical setting, more than half of the students required the assistance of an instructor to adjust their cone's fit. The presence of an apical stop had the most significant effect on the length of the fitted master GP cone on radiography. The most common cause of ill-fitting master cones was improper shaping of the canal., (© 2024. The Author(s).)

Identifying the presence, size, type and location of voids in an endodontic obturation is of great clinical importance because it enables evaluation of the three-dimensionality of the sealing techniques, which can be related to the success of the endodontic treatment., Aim: To analyze by micro-CT the presence of voids in lower single-rooted premolar root canal obturations prepared using the single cone and ultrasound vibration technique., Materials and Methods: Twenty extracted single-rooted lower premolars were selected, and the root canal prepared surgically and chemically. In GROUP 1 - Without Vibration, the canal was obturated with a single cone and bioceramic, without applying vibration. In GROUP 2 - With Vibration, the gutta-percha cone inside the root canal was held with a cotton plier to which ultrasound vibration was applied for 3 periods of 3 seconds each. A micro-CT scanner was used to acquire and reconstruct images for analysis., Results: No significant difference was found between obturation techniques, though there were differences between thirds, with the cervical third having a higher percentage of voids than the middle and apical thirds., Conclusions: The results suggest that the volume of closed, open and total voids does not differ between treatments with and without ultrasound vibration. In the cervical third, the highest volume of voids was related to oval geometry in the teeth evaluated., Competing Interests: The authors declare no potential conflicts of interest regarding the research, authorship, and/or publication of this article., (Copyright© 2024 Sociedad Argentina de Investigación Odontológica.)

Background: Root canal retreatment aims to eliminate or substantially reduce the microbial load from the root canal and removal of previous root filling materials is the primary goal of nonsurgical retreatment., Aim: To comparatively evaluate the effectiveness of ProTaper retreatment files, Mtwo retreatment files, and Hedstrom files along with Gates Glidden (GG) Drill by using a stereomicroscope for the detection of remaining gutta-percha after root canal retreatment using a stereomicroscope., Materials and Methods: Forty-five test samples were divided into three experimental groups (15 samples each), such as Group A-ProTaper retreatment files; Group B-Mtwo retreatment files; Group C-Hedstrom files along with Gates Glidden Drill. After routine endodontic treatment in the test samples, gutta-percha was removed from the test samples as per the division of different retreatment file systems. Further, test samples were divided longitudinally and were evaluated under the stereomicroscope. Stereomicroscopic images were captured and analysed under Image Analyser Software-Image J., Statistical Analysis: One-way ANOVA test was used for comparison of gutta-percha removal between the groups and Tukey's post hoc test was used for pairwise comparisons., Results: The least remaining filling material was seen in specimens retreated with the ProTaper universal system. The highest remaining filling material was seen in specimens retreated with Hedstrom file with Gates Glidden Drill., Conclusion: All experimental test techniques left gutta-percha remnants within the root canal. ProTaper universal rotary retreatment system proved to be an efficient method of removing gutta-percha and left relatively less volume in comparison with other test systems., (Copyright © 2024 Copyright: © 2024 Indian Journal of Dental Research.)

This study evaluated the feasibility of an automated method to delimit the required area to quantitatively analyze root filling voids and gaps from cross-sectional confocal laser scanning microscopy (CLSM) images. Root canals of maxillary canines were prepared with rotary instruments and filled by lateral compaction technique using gutta-percha and AH Plus sealer. The roots were stored (100% humidity, 37 °C) for a period of 24 h and then transversally sectioned to obtain 2-mm-thick slices from the apical and middle thirds. The areas corresponding to filling materials, gaps, and voids were manually delimited or automatically demarked by ImageJ software after converting the images to the RGB color system. Based on manual and automatic delimitations, the percentages of voids and gaps were calculated. Data of voids and gaps between middle and apical thirds were individually compared by paired t-test. Pearson`s correlation test was used to assess the correlation of data between the methods. Irrespective of the method of area delimitation, no difference was observed between the root thirds for both voids and gaps, while the p-values calculated for each method were similar. Almost perfect correlations between the methods were observed for both outcomes. The proposed method to automatically delimit the areas corresponding to filling material, voids, and gaps appears to be a valid method to facilitate the quantitative analysis of defects in root canal fillings using topographic CSLM images., (© 2023. The Author(s), under exclusive licence to The Society of The Nippon Dental University.)

Introduction: Due to its biological and antibacterial qualities, many plants, including curcumin, are used as phytomedicines in dentistry. They are primarily used as intracanal medication in endodontics to prevent probable chemical side effects and also to address antimicrobial resistance. Curcumin nanoformulations have improved antibacterial activity and improved dispersion, making them the superior form of curcumin. The purpose of this study was to assess curcumin and nanocurcumin's antibacterial properties. As a gutta-percha coating, they are to be tested against Escherichia coli., Materials and Methods: The study employs the standard strain of E. coli, ATCC 25922. The antibacterial activity of gutta-percha cones against E. coli is assessed after coating them with suspensions of curcumin and nanocurcumin. Scanning electron microscopy is utilized to evaluate the coatings' continuity., Results: The gutta-percha cones that are untreated, coated with curcumin, and coated with nanocurcumin exhibit significantly different levels of antibacterial activity. There is statistically significant variation in their antibacterial activity., Conclusion: (1) Compared to curcumin-coated and untreated gutta-percha cones, those coated with nanocurcumin exhibit a stronger antibacterial activity. (2) Compared to uncoated gutta-percha cones, gutta-percha cones coated with curcumin exhibit more antibacterial action., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Journal of Conservative Dentistry and Endodontics.)

Understanding the properties of endodontic sealers is vital for treatment planning. Calcium silicate-based sealers are important in modern endodontics. This study investigates the effect of heat on the physicochemical properties of new calcium silicate sealers, addressing concerns raised by clinicians seeking to combine their benefits with the gutta-percha obturation technique. Five endodontic sealers (AH Plus Bioceramic®, Total Fill® BC®, One-fil® Bioceramic, K-Biocer, Any-seal®) were evaluated. Each sealer (n = 16/group) was either kept at 37 °C or subjected to heat at 60 or 200 °C for 30 s. ISO 6876-2012 standards were used to measure setting time, flow, film thickness, and dimensional changes over time. SEM and EDS were utilized for surface and chemical analysis. Data analysis employed IBM SPSS Statistics version 26 with a 5% significance level for two-sided tests. The sealers' setting times were shortened by heat, except for Total Fill® BC with extended setting time. All sealers had significantly longer setting times than manufacturer specifications. Film thickness increased with temperature, while flow values decreased. K-Biocer sealer showed the highest flow (16.89 ± 0.57 mm) at 200 °C, while Total Fill® sealer had the lowest (15.32 ± 0.62 mm). Shrinkage was significant at 60 °C and 200 °C, with greater shrinkage at 200 °C. Heat caused surface deformations in all sealers. The 200 °C groups exhibited more voids in AH Plus Bioceramic®, Any-seal®, and One-fil® sealers, and higher void area in Total Fill®, One-fil®, and K-Biocer sealers (p value < 0.001). EDX analysis confirmed heat-induced chemical and elemental changes in all tested sealers. Elevated temperature affects the physicochemical properties and structure of the tested endodontic sealers. The consideration of endodontic sealer compatibility is essential when warm gutta-percha obturation techniques are used., (© 2023. The Author(s), under exclusive licence to The Society of The Nippon Dental University.)

Introduction: This retrospective study focuses on dental students' proficiency in removing gutta-percha during fiber post space preparation, which is important for maintaining apical seal integrity in endodontically treated teeth. Emphasizing the significance of preventing further reinfection. The primary objective of this study was to assess the proficiency of undergraduate dental students in the manipulation of gutta-percha during fiber post preparation, specifically focusing on the psychomotor skills involved. In addition, the study aims to determine the predictive value of these skills on the ultimate clinical outcomes of the procedure, with particular emphasis on variations attributable to tooth type., Materials and Methods: The analysis encompassed 290 periapical radiographs obtained from endodontically treated teeth, all of which had undergone fiber post placement by undergraduate students at the College of Dentistry, Taibah University, Saudi Arabia. Postoperatively, the length of the remaining gutta-percha was measured by two experts in the field, and subsequent outcomes were classified into three categories: optimal, suboptimal, and inadequate, based on the extent of gutta-percha remaining., Results: Students showed optimal removal rates ranging from 33.3% to 73.1%. Among the studied sample, upper anterior teeth were the highest included teeth (n=117, 40%). Remarkably, lower anterior teeth were more prone to suboptimal and inadequate gutta-percha remaining lengths (n=24, 33%). However, the chi-square test revealed no statistically significant difference in students' psychomotor skills while removing the gutta-percha and preparing the teeth to receive fiber posts across tooth types (p-value > 0.05)., Conclusion: With the limitations of this study, more than half of the included cases show that undergraduate students of the College of Dentistry at Taibah University, Saudi Arabia, possess an optimum level of psychomotor skills in removing gutta-percha while preparing the teeth for receiving fiber posts. This study suggests enhancing the preclinical training of students by considering more training on different tooth types in relation to dental arches., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2024, Bafail et al.)

This study was designed to investigate the impact of access cavity designs on fracture resistance of endodontically treated maxillary first premolars. The study sample consisted of 72 intact maxillary first premolars, randomly divided into six groups (n = 12). A standardized proximal cavity preparation was prepared for all samples using standard bur. Groups I: control group with only standard proximal cavity and no endodontic access, group II: Truss access cavity, group III: Separated access to buccal and palatal canals without removal of dentine in between, group IV: Access to buccal and palatal canals with removal of dentine in between, group V: Traditional access cavity, group VI: Mesio-occlusal-distal cavity (MOD). For groups I and VI, only composite restoration was used to restore the proximal cavity, while for groups II- V, the access was prepared and endodontic treatment was performed on all teeth, then composite restoration was placed. The root canals were instrumented using nickel-titanium files, irrigated with sodium hypochlorite, and filled with AH plus sealer and gutta-percha using warm vertical condensation. All samples were then placed in an acrylic mold and underwent thermal aging for 10,000 cycles between 5 and 55°C. The samples were fixed in a universal testing machine with the long axis of the roots positioned at 20° to a load applied at a crosshead speed of 1 mm/min using a stainless steel semi-spherical indenter (Ø = 3 mm) until fracture occurred to determine the fracture resistance force in Newton. The normality test (Shapiro-Wilk) showed that data are normally distributed. Group II exhibited the highest mean fracture resistance, and group VI was the least likely to resist the fracture. No statistically significant differences between tested groups (p-value = 0.237). The MOD group showed a more unfavorable mode of fracture compared to other groups. No significant difference in fracture resistance between conservative and traditional access cavities. The missing marginal ridges, such as in MOD cavities played an important role in decreasing the fracture resistance of endodontically treated teeth.

Background: Adhesiveness with radicular dentin is absent with gutta-percha, leading to microleakage and hence re-infection. Root canal sealer helps to achieve an adhesive interface between gutta-percha and root dentin thereby resisting the displacement forces during the functioning of teeth which is evaluated by the push-out test. The aim of this study is to compare the push-out bond strength and to assess the relative bond failure between dentin-sealer, sealer-main cone of (1) epoxy resin, (2) silicon, (3) mineral trioxide aggregate (MTA), (4) calcium hydroxide, (5) bioceramic, (6) zinc oxide eugenol containing root canal sealers., Methodology: Sixty human permanent lower premolars with one root were collected, disinfected, and decoronated at cemento-enamel junction. Instrumentation was done with a K3 40,0.06 Ni-Ti rotary file and obturated using the main cone and sealer. Based on the sealer utilized, six groups were created: Group 1: AH-Plus, Group 2: RoekoSeal, Group 3: MTA Fillapex, Group 4: Apexit, Group 5: Smart Paste Bio, and Group 6: Procosol. One slice each was obtained from the coronal, middle, and apicalsections of all the obturated canals. Push-out bond strength and failure modes were studied. Statistics involved analysis of variance (ANOVA) followed by the post hoc Tukey test., Results: All three sections exhibited the highest strength for Smart Paste Bio sealer and the least was for RoekoSeal. With all the sealers, the apical section had the highest strength followed by the middle and coronal., Conclusion: The smart seal system was superior to all other sealers and displayed a good bond to dentin., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2024, Dudulwar et al.)

This research aimed to assess the stress distribution in lower premolars that were obturated with BioRoot RCS or AH Plus, with or without gutta percha (GP), and subjected to vertical and oblique forces. One 3D geometric model of a mandibular second premolar was created using SolidWorks software. Eight different scenarios representing different root canal filling techniques, single cone technique with GP and bulk technique with sealer only with occlusal load directions were simulated as follows: Model 1 (BioRoot RCS sealer and GP under vertical load [VL]), Model 2 (BioRoot RCS sealer and GP under oblique load [OL]), Model 3 (AH Plus sealer with GP under VL), Model 4 (AH Plus sealer with GP under OL), Model 5 (BioRoot RCS sealer in bulk under VL), Model 6 (BioRoot RCS in bulk under OL), Model 7 (AH Plus sealer in bulk under VL), and Model 8 (AH Plus sealer in bulk under OL). A static load of 200 N was applied at three occlusal contact points, with a 45° angle from lingual to buccal. The von Mises stresses in root dentin were higher in cases where AH Plus was used compared to BioRoot RCS. Furthermore, shifting the load to an oblique direction resulted in increased stress levels. Replacing GP with sealer material had no effect on the dentin maximum von Mises stress in BioRoot RCS cases. Presence of a core material resulted in lower stress in dentin for AH Plus cases, however, it did not affect the stress levels in dentin for cases filled with BioRoot RCS. Stress distribution in the dentin under oblique direction was higher regardless of sealer or technique used., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Smran et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Background: This animal study sought to evaluate two novel nanomaterials for pulpotomy of primary teeth and assess the short-term pulpal response and hard tissue formation in dogs. The results were compared with mineral trioxide aggregate (MTA)., Methods: This in vivo animal study on dogs evaluated 48 primary premolar teeth of 4 mongrel female dogs the age of 6-8 weeks, randomly divided into four groups (n = 12). The teeth underwent complete pulpotomy under general anesthesia. The pulp tissue was capped with MCM-48, MCM-48/Hydroxyapatite (HA), MTA (positive control), and gutta-percha (negative control), and the teeth were restored with intermediate restorative material (IRM) paste and amalgam. After 4-6 weeks, the teeth were extracted and histologically analyzed to assess the pulpal response to the pulpotomy agent., Results: The data were analyzed using the Kruskal‒Wallis, Fisher's exact, Spearman's, and Mann‒Whitney tests. The four groups were not significantly different regarding the severity of inflammation (P = 0.53), extent of inflammation (P = 0.72), necrosis (P = 0.361), severity of edema (P = 0.52), extent of edema (P = 0.06), or connective tissue formation (P = 0.064). A significant correlation was noted between the severity and extent of inflammation (r = 0.954, P < 0.001). The four groups were significantly different regarding the frequency of bone formation (P = 0.012), extent of connective tissue formation (P = 0.047), severity of congestion (P = 0.02), and extent of congestion (P = 0.01). No bone formation was noted in the gutta-percha group. The type of newly formed bone was not significantly different among the three experimental groups (P = 0.320)., Conclusion: MCM-48 and MCM-48/HA are bioactive nanomaterials that may serve as alternatives for pulpotomy of primary teeth due to their ability to induce hard tissue formation. The MCM-48 and MCM-48/HA mesoporous silica nanomaterials have the potential to induce osteogenesis and tertiary (reparative) dentin formation., (© 2024. The Author(s).)

Aim: There are currently no high-quality studies comparing the static navigation technique with conventional methods of fibre post removal. The aim of this ex vivo study was to compare the effectiveness of fibre post removal between a static navigation technique and a conventional freehand technique using ultrasonics by experienced and inexperienced operators., Methodology: Forty-eight extracted single-rooted human premolars were root-filled. A fibre post was cemented in all 48 teeth, which were then divided randomly into the following groups: static navigation group using burs; static navigation-ultrasonic group; and non-guided group using ultrasonic tips. The following parameters were evaluated for both experienced operators and inexperienced operators: reaching the gutta-percha root filling successfully, the time required to remove the entire post, the occurrence of lateral root perforations, and the amount of root dentine removed. The Kolmogorov-Smirnov test was used to examine the normality of the data; the anova test was used to compare the significant differences among groups; and Tukey tests were used for all two-by-two comparisons. The significance level was set at 0.05., Results: In the static navigation group, the gutta-percha was reached significantly more frequently than in the non-guided group (p < .05). The static navigation approach required significantly less time than the non-guided approach to reach the gutta-percha (p < .05). The total removal of posts was significantly different between groups (p < .05), but there was no significant difference between experienced and inexperienced operators in the static navigation group (p > .05). More perforations were associated with the non-guided group than with the other two groups. The total mean loss of dentine in the non-guided group in all directions was 0.39 (±0.17) mm, with 0.25 (±0.09) mm for experienced, and 0.42 (±0.16) mm for inexperienced operators., Conclusion: When compared to a conventional ultrasonic technique for the removal of fibre posts, the static navigation method using burs resulted in less dentine removal, more rapid access to the gutta-percha root filling, less overall time to remove the posts, and fewer complications. When using static navigation, there was no difference in performance between experienced and inexperienced operators., (© 2024 The Authors. International Endodontic Journal published by John Wiley & Sons Ltd on behalf of British Endodontic Society.)

This study aimed to compare the efficacy of 2.5% sodium hypochlorite (NaOCl), 2.5% calcium hypochlorite [Ca(OCl) 2 ], and 2% chlorhexidine (CHX) in the rapid disinfection of gutta-percha cones contaminated with Candida albicans. The minimum inhibitory and minimum fungicidal concentrations of each solution for C. albicans were determined and the ability of each solution to destroy and inhibit biofilm in culture wells was tested. In addition, ninety-eight gutta-percha cones contaminated with the fungal suspension were disinfected according to the type of solution (2.5% NaOCl, 2.5% Ca(OCl) 2 or 2% CHX) in its different application methods (without agitation, ultrasonic agitation or agitation with Easy Clean), and regarding the exposure time to each irrigating solution (1 or 5 min). Next, the samples were checked for turbidity and evaluation of viable colonies. The compounds that showed the best performance in biofilm destruction were NaOCl and Ca(OCl) 2 at a concentration of 2xMIC (p < 0.001). Regarding inhibited biofilm, the only compound that was effective at all MIC concentrations tested was 2.5% Ca(OCl) 2 (p < 0.0001). Regarding the viable colonies, all solutions were effective concerning the control group, for all application methods, in 1 and 5 min (p < 0.05). The densitometer reading showed that CHX was the only effective solution in all application methods performed (p < 0.05). The results demonstrate that all tested solutions were effective in the rapid decontamination of cones contaminated with C. albicans., (© 2024. The Author(s) under exclusive licence to Sociedade Brasileira de Microbiologia.)

Introduction: The purpose of this study was to evaluate the ability of the Reciproc, Reciproc Blue, and WaveOne Gold systems to remove filling material during endodontic retreatment of extracted human mandibular premolars., Methods: Thirty-nine teeth were instrumented with the Protaper Universal System to the F3 file and filled with the Tagger hybrid technique using an F3 gutta-percha cone and AH Plus cement. At the end of this period, the teeth were scanned with micro-computed tomography before and after removal of the filling material from the root canals. The teeth were divided into 3 groups (n = 13) based on the apical volume, depending on the systems used to remove the filling material. Group GR: Reciproc 40/.06; Group GRB: Reciproc Blue 40/.06; and Group GWG: WaveOne Gold 35/.06. The results were statistically analyzed using the tests of Kruskal-Wallis, Duncan, and analysis of variance at a significance level of 5%., Results: The results showed that there were no significant differences between the amounts of filling material removed, either for the apical and middle regions alone or in the overall evaluation for the 3 groups (P = .97). The time evaluation statistically showed that the GR and GWG groups required less time to clean the root canals than the GRB group., Conclusions: Reciproc R40 files and WaveOne Gold Medium files required less time for endodontic treatment than Reciproc Blue R40 files. There was no difference in the ability to remove obturation material between the 3 instruments. No instrument was able to completely remove the filling material from the root canals., (Copyright © 2023 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Objective: We investigated the influence of voxel and field of view (FOV) sizes on expression of the volumetric alteration artifact (VAA) of 5 high-density materials in 2 cone beam computed tomography (CBCT) devices., Study Design: Cylinders of amalgam, cobalt-chromium, gutta-percha, titanium, and zirconium were individually positioned in a polymethyl methacrylate phantom. OP300 Maxio and ProMax 3D Classic CBCT devices were used to acquire images with varying voxel and FOV sizes, totaling 585 scans. Two evaluators segmented the high-density cylinder images to obtain the tomographic volumes. The difference between the tomographic and physical volume of each cylinder (i.e., volumetric alteration) was calculated. Statistical analysis was conducted with multiway ANOVA and the Tukey post hoc test (α = 5%). Evaluator reliability was measured with the intraclass correlation coefficient (ICC)., Results: All studied parameters and nearly all interactions influenced the VAA (P < .05). The post hoc test demonstrated less volumetric alteration for the smallest voxel sizes, 61 × 78 mm FOV, and gutta-percha for OP300, and for the smallest voxel sizes, 80 × 80 mm FOV, and gutta-percha and titanium for ProMax 3D (P < .05). The ICC demonstrated perfect reliability (1.00)., Conclusions: Voxel and FOV sizes influenced VAA expression. Using smaller voxel sizes, the 61 × 78 mm FOV for OP300 and the 80 × 80 mm FOV for ProMax 3D, and materials with lower density and lower atomic number reduced VAA expression., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Objective: To evaluate the sealing ability of GuttaFlow2 single cone obturation in curved root canals., Methods: (1) Slight, moderate and severe curved 3D printed root canals were made. After instrumentation, these samples were randomly divided into 2 groups ( n = 10) according to different root canal filling techniques: GuttaFlow2 single cone group (GF2) and AH-Plus warm vertical compation group (WVC). All the samples were sectioned at 2 mm to apex (the apical of the root), 4 mm, 6 mm to apex (the middle of the root) and 8 mm to apex (the coronal of the root). The filling void areas were observed by stereomicroscope, and the percentages of void areas in each section were calculated by ImageJ 1.52a. (2) Forty-eight roots of extracted adult molars were selected. After instrumentation, they were randomly divided into 2 groups ( n = 8): GF2 group and WVC group. Before root canal filling, the sea-lers were mixed with Rhodamine B dye for visualization under confocal laser scanning microscope. All samples were sectioned at 2 mm to apex (the apical of the root), 5 mm to apex (the middle of the root) and 8 mm to apex(the coronal of the root). Then, the percentages of sealer penetration into dentinal tubules in each section were calculated., Results: At the apical of the root, there were no obvious voids in slight, moderate and severe curved canals in the GF2 group and the WVC group. There was no significant difference between the two groups ( P > 0.05). At the middle of the root, there was no significant difference in the percentages of void areas between the two filling methods, but at the coronal of the root, there were more voids in the slight curved root canal in the GF2 group than in the WVC group, and the difference was significant ( P = 0.009). The percentages of sealer penetration into dentinal tubules of slight, moderate and severe curved root canals in the GF2 group were 36.10%, 55.80%, 65.08%, respectively. And they were all higher than those in the WVC group (15.78%, 20.70%, 15.61%), respectively, the difference between the two groups was significant ( P = 0.001). At the middle of the root, the percentages of sealer penetration into dentinal tubules of slight and moderate curved root canals in GF2 group were also significantly higher than those in the WVC group ( P = 0.001). At the coronal of the root, there was no significant difference between the two groups ( P > 0.05)., Conclusion: GuttaFlow2 filling technique has the same sealing effect on the root canal at the apical and middle of the root as the warm vertical technique, but has a better sealing effect on the dentin tubules, especially for severe curved root canal.

Background: Different obturation techniques are being used to improve canal sealing, thereby minimizing marginal leakage., Aims and Objectives: To evaluate the marginal leakage of three different obturating materials and techniques using stereomicroscope., Materials and Methods: Thirty freshly extracted maxillary anterior teeth were collected and were divided into three groups of 10 each for which the biomechanical preparation was done. The teeth were divided into three experimental groups according to the obturation material and technique used, Group I: gutta-percha with AH Plus root canal sealer (lateral condensation): Group II: thermoplasticized gutta-percha technique-non-carrier-based (calamus) with AH Plus sealer (backfill): Group III: C point (self-sealing root canal obturating system) with bioceramic sealer (single cone). Each specimen was subjected for testing apical sealing ability. The values of microleakage associated with different root canal sealers were evaluated using a stereomicroscope., Results: There was no statistically significant difference in the mean scores of apical dye penetration/leakage among all the three groups ( P = 0.091), whereas Group I showed a higher degree of apical leakage than the other techniques tested., Conclusion: None of the tested filling materials provided a gap-free or void-free root canal filling; however, thermoplasticized gutta-percha is used with AH Plus sealer exhibited less voids and gaps when compared to other tested materials., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Journal of Pharmacy and Bioallied Sciences.)

Introduction: The aim of this study was to evaluate the filling ability of 2 obturation techniques in 3-dimensional (3D) printed teeth with perforating internal resorption (PIR)., Methods: A maxillary central incisor was instrumented and scanned by micro-computed tomographic (micro-CT) imaging. The 3D model was exported in the stereolithographic format and, with the aid of OrtogOnBlender software (Cícero Moraes, Sinop, SP, Brazil), a PIR in the middle third of the root canal was designed. Thirty-two replicas were printed in surgical resin and distributed into 4 groups (n = 8) according to the obturation technique and the material used: 2 groups used the hybrid technique, 1 with Bio-C Sealer (BCS; Angelus, Londrina, PR, Brazil)/gutta-percha (GP; VDW GmbH, Munich, Germany) + Bio-C Repair (BCR; Angelus, Londrina, PR, Brazil) and the other with BioRoot (BR; Septodont, Saint Maur des Fosses, France)/gutta-percha (GP) + Biodentine (BD; Septodont, Saint Maur des Fosses, France), and 2 groups used the incremental technique, 1 with BCR and the other with BD. Postobturation micro-CT imaging was performed to measure the percentage volume of voids and laser confocal microscopy to measure the surface roughness (μm) of the repair cements. Data were compared using analysis of variance and Kruskal-Wallis tests., Results: Regarding the filling volume in the apical third, the BCS/GP + BCR (89.70 ± 5.15), BR/GP + BD (87.70 ± 8.43), and BCR (84.20 ± 9.00) groups showed the highest percentages compared with the BD group (69.70 ± 6.88) (P < .05). In the area of internal resorption, the BCS/GP + BCR (96.00 ± 2.64) and BCR (95.30 ± 2.93) groups showed the highest percentages compared with the BR/GP + BD group (91.50 ± 1.35) (P < .05). The BD group showed intermediate values that were sometimes similar to the BCS/GP + BCR and BCR groups and similar to the BR/GP + BD group (P > .05). Regarding the quality of the filling in the perforation area, the BCR group showed better results compared with the BD group (P < .001). Regarding roughness, the BCR group (1.66 ± 0.65) showed lower surface roughness compared with the BD group (2.51 ± 0.89) (P < .05)., Conclusions: The capacity and quality of the filling in teeth with PIR were superior with the incremental technique with BCR and the hybrid technique with BCS/GP + BCR., (Copyright © 2023 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Background: This study aimed to compare the effect of different obturation techniques with root canal sealers on the residual filling material after retreatment using SEM., Material and Method: Sixty (60) single rooted mandibular premolars were selected and instrumented with rotary files using the Mtwo system up to file size 30/.05 taper. The samples were randomly divided to two groups based on the type of sealer and three sub-groups (n=10) based on the obturating technique used. The root fillings were removed using the PTUR system files and the specimens were longitudinally sectioned while digital images were obtained from the root canals with SEM. The time required to reach working lenght were recorded., Results: There was no difference in terms of the smear score when comparing both sealer and obturation technique groups in the apical third. Smear scores were significantly affected by the type of sealer and obturation technique in the medium and coronal thirds of root canals (p<0.05). Higher smear scores were obtained with GFB than AH Plus (p<0.05). The time required to reach working length with GFB was longer than AH Plus (p<0.05)., Conclusion: Residual filling material was observed in all samples, regardless of the root canal sealer or the obturation technique used. There was a significantly lower smear scores in the AH Plus groups as compared to the GFB., (Copyright © 2024 Copyright: © 2024 Nigerian Journal of Clinical Practice.)

The effects of Easydo Activator (EA), a new sonic irrigation system, on sealer penetration at the root apex were compared to needle irrigation (NI) and passive ultrasonic irrigation (PUI) in this study. Forty-two single-rooted teeth were prepared and randomly divided into three groups (n = 14): group 1: NI; group 2: PUI; and group 3: EA. A solution of 3% sodium hypochlorite (NaOCl) was used for irrigation. Nine teeth in each group were filled with AH Plus sealer mixed with CY5 fluorescent dye and a single gutta-percha cone. The sealer penetration area, maximum penetration depth and percentage of sealer penetration at 5 mm and 1 mm from the apex were analyzed by confocal laser scanning microscopy (CLSM). The remaining 5 teeth in each group were subjected to test smear layer scores by scanning electron microscopy (SEM). The CLSM evaluation showed that increases in the area, depth and percentage of sealer penetration were detected at 1 and 5 mm from the root apex in the PUI group compared with the NI group, and greater increases were observed in the EA group (P < 0.05). The SEM experiment showed that the lowest scores for the smear layer and debris removal were achieved by the EA group when compared with the PUI and NI groups (P < 0.05). In conclusion, EA was superior to PUI and NI regarding sealer penetration at the root apex during endodontic treatment, and it could provide a new technical idea for clinical root canal therapy., (© 2023. The Author(s).)

Aim: The tensile strength and modulus of elasticity of gutta-percha cones can be chemically altered due to disinfectant solutions. Therefore, the aim of the present study was to compare tensile strength and elastic modulus of gutta-percha cones subjected to sodium hypochlorite (NaOCl) disinfection at different times., Materials and Methods: This in vitro and longitudinal experimental study consisted of 45 gutta-percha cones, divided equally into three groups: Group 1 (disinfection with 2.5% NaOCl), Group 2 (disinfection with 5.25% NaOCl), and control group. All groups were subdivided according to immersion times for 1, 5, and 10 minutes. Tensile strength and elastic modulus were measured with a universal testing machine. For comparing more than two independent groups, parametric analysis of variance test with Sheffe's post hoc was used and for multivariate analysis, and multivariate analysis of variance test based on Pillai's Trace was used. In all statistical analysis, a significance level P ≤ 0.05 was considered., Results: When comparing the tensile strength of gutta-percha cones, no significant differences were observed after being immersed at 1, 5, and 10 minutes in NaOCl 2.5% ( P = 0.715) and 5.25% ( P = 0.585). Regarding the elastic modulus, a significant decrease ( P < 0.05) was observed in those that were immersed in NaOCl 2.5% and 5.25% for 1, 5, and 10 minutes. Furthermore, increased NaOCl concentration significantly reduced the elastic modulus ( P < 0.001). However, there were no significant differences in tensile strength ( P > 0.05) and elastic modulus ( P > 0.05), when evaluating the interaction between NaOCl concentration and time., Conclusion: Increasing NaOCl concentration significantly reduced the modulus of elasticity without affecting the tensile strength of gutta-percha cones, regardless of immersion time. Furthermore, the interaction of time and NaOCl concentration did not significantly affect the tensile strength and elastic modulus., Competing Interests: None to declare., (Copyright: © 2024 Journal of International Society of Preventive and Community Dentistry.)

Background: Once bioceramic sealer (BCS) enters the dentinal tubules, it cannot be reliably removed. BCS-occupied dentinal tubules reduce fibre post retention strength. Coating gutta-percha with BCS only on the apical portion may improve post retention strength due to increased retention strength between the dentin and resin cement interface. The aim of the study was to test this hypothesis., Methods: Root canals of 27 extracted human mandibular premolars were instrumented and randomly assigned to three obturation methods: conventional coating (CC), non-coating (NC), and apical coating (AC). The root canals were obturated with gutta-percha to 4 mm from the working length under an operating microscope. After the BCS was completely set, post spaces were prepared, and quartz fibre posts were cemented. The apical 4.5 mm of the roots were removed. Two samples were prepared at the apical, middle, and coronal root levels (one for scanning electron microscope (SEM) study and another for the push out bond strength (PBS) test). After the PBS test, the samples were examined with a stereo microscope to determine the failure mode: dentine-cement (DC), post-cement (PC) and mixed. The PBS data were analysed by One way ANOVA for the specific obturation method effects. Repeated ANOVA was used for the specific effects of the root levels on PBS in different obturation methods., Results: At all three root levels, more continuous hybrid layers and denser resin tags were found in the NC and AC than the CC group. The AC and NC groups' PBS was significantly higher than the CC group at the apical 1/3 (p = 0.002 and p = 0.001) and coronal 1/3 (p = 0.016 and p = 0.041). The PBS in the CC group at the middle 1/3 was significantly higher than the apical 1/3 (p = 0.022). DC failure mode was most commonly found in the CC group, while PC failure mode was found most frequently in the NC and AC groups., Conclusions: The apical coating obturation method significantly increased PBS over the conventional coating method, potentially reducing fiber post dislodgement. However, this study was only preliminary. Clinical studies are required to confirm the results., (© 2023. The Author(s).)

Aim: The aim of this present study was to compare the dislodgement resistance of calcium silicate-based sealer, zinc oxide sealer, and a new sealer combining both zinc oxide and calcium silicate-based sealer in vitro ., Materials and Methods: 60 single-rooted human teeth were instrumented with F3 Protaper Gold. All endodontic canals were filled using gutta percha cones using the cold lateral condensation technique in combination using one of the mentioned sealers ( n  = 20 per group). The teeth were divided into three groups: group A consisted of Sealite® Ultra, group B consisted of K-Sealer®, and group C consisted of BioRoot® RC. After 2 months of incubation (37°C, 100% humidity) and after cutting out 2 mm from the most apical portion of the root apex, six slices of 1 mm thickness were generated. Mechanical dislodgement resistance was examined using a universal pressure-testing machine and the push-out bond strength (POBS) was calculated. Specimens were examined under 20× magnification to define the bond failure mode. Statistical analysis was executed using ANOVA, post hoc Turkey test for pairwise comparisons and Kruskal-Wallis tests., Results: The POBS of BioRoot® was significantly higher than the POBS of the two other sealers with a mean of 10.54 MPa ± 2.10 and 5.73 MPa ± 2.34, respectively ( p  < 0.001). Sealite® and K-Sealer® showed similar results in the median and coronal part. K-Sealer® revealed highest POBS compared with Sealite® in the apical part ( p  < 0.05)., Conclusion: The POBS of the zinc oxide and calcium silicate-based sealer was significantly lower compared with calcium silicate. Sealite® and K-Sealer® exhibited almost same results. BioRoot showed the highest POBS of all sealers., Clinical Significance: The current study was needed to evaluate the bond strength of three different cements to dentinal walls, by evaluating their respective POBS in vitro . The findings of this study may provide guidance for the clinician in the selection of an adequate endodontic sealer that guarantees an enhanced adhesive seal between the Gutta-percha and the dentinal canal walls. How to cite this article: Makhlouf MP, El Helou JD, Zogheib CE, et al . Comparative Evaluation of Push-out Bond Strength of Three Different Root Canal Sealers: An In Vitro Study. J Contemp Dent Pract 2024;25(1):15-19.

Purpose: Using X-ray micro-computed tomography (micro-CT), the aim of this study was to measure the porosity of two tricalcium silicate sealers (EndoSequence BC and NeoSealer Flo) applied using three obturation techniques (single-cone, warm-vertical, and cold-lateral) to six single-rooted human teeth., Methods: Six extracted, single-rooted human teeth were shaped with ProTaper Next rotary files and obturated with EndoSequence BC or NeoSealer Flo sealers and gutta-percha (GP) using one of the three techniques above. Micro-CT was used to map the full length of the canals. Deep learning cross-sectional segmentation was used to analyze image slices of the apical (0-2 mm) and coronal (14-16 mm from the apex) regions (n = 230-261 per tooth) for the areas of GP and sealer, as well as porosity. Median (%) with interquartile range of porosity were calculated , and the results were statistically analyzed with the Kruskal-Wallis test., Results: In the apical region, EndoSequence BC had significantly fewer pores than NeoSealer Flo with the single-cone obturation (% median-interquartile range, IQR: 0.00-1.62) and warm-vertical condensation (5.57-10.32) techniques, whereas in the coronal region, NeoSealer Flo had significantly fewer pores than EndoSequence BC with these two techniques (0.39-5.02) and (0.10-0.19), respectively. There was no significant difference in porosity between the two sealers for the cold-lateral condensation technique in both the apical and coronal regions., Conclusion: For optimal obturation, the choice of technique and sealer is critical.

Aim: This study aimed to use the micro-computed tomography to evaluate the interfacial adaptation and the presence of gaps of NeoMTA Plus, BioRoot RCS, and MTA in the root-end cavities., Methodology: Thirty standardized bovine roots measuring 15 mm in length were selected. Chemical-mechanical preparation was performed up to instrument #80 and obturation with the cold lateral compaction technique with cement based on zinc oxide and eugenol. The roots were kept at 37°C for 7 days. Afterward, apicectomy of the apical 3 mm and a root-end filling cavity was performed at 3 mm depth. Micro-computed tomography (micro-CT) was performed to measure the volume of the retroactivity. The roots were divided by stratified randomization into three groups according to the retro-end filling material: NeoMTA Plus, BioRoot RCS, and MTA. A new micro-CT was performed to assess the presence of voids in the root-end filling material and between it and the canal wall. One-way ANOVA and Tukey tests were performed using the BioEstat 4.0 program., Results: There was no difference in the initial volume values of the root-end cavities (p > .05). After the insertion of root-end filling materials, the most significant volumes of voids were observed in the NeoMTA Plus group (p < .05), with no difference for the BioRoot RCS and MTA Angelus groups (p > .05)., Conclusion: Micro-computed tomography showed that MTA and BioRoot RCS have better interfacial adaptation and presented fewer number of gaps than NeoMTA Plus when used as root-end filling materials., Research Highlights: Micro-computed tomography evaluation of different root-end fillings materials., (© 2023 Wiley Periodicals LLC.)

The aim of this study was to perform an integrative review to identify the most effective supplementary protocols used after filling material (FM) removal and root canal reinstrumentation, during endodontic reintervention. The literature search was performed on the electronic databases PubMed and Latin American and Caribbean Health Sciences Literature (LILACS), using a combination of specific scientific descriptors. Selection criteria accepted articles published in English, Spanish and Portuguese languages, up to August 2021, involving in vitro and ex vivo studies. After applying the eligibility criteria, 46 articles were included for qualitative analysis. The tool for qualitative analysis of quasi-experimental studies of the Joanna Briggs Institute was used to determine the risk of bias of the included articles. The selected articles provided important data regarding the following supplementary protocols: sonic and ultrasonic activation of the irrigating solution; the use of ultrasonic inserts, XP-endo system instruments, and photon-induced photoacoustic streaming for mechanical debridement; and new devices as GentleWave system, and the self-adjusting file. Overall, all supplementary protocols demonstrated efficacy in removing the remaining FM. The implementation of various supplementary protocols can effectively remove the remaining FM from the root canal walls, although complete removal is not always achieved. However, it was not possible to determine the most effective protocol. Conversely, their association can enhance remaining FM removal. Remaining FM attached to root canal walls hinders proper chemical-mechanical preparation during endodontic reintervention. Supplementary protocols optimize the remaining FM removal, enhancing cleaning and disinfection of root canal., (© 2023. The Author(s), under exclusive licence to The Society of The Nippon Dental University.)

It was aimed to compare the dentine tubule penetration of AH Plus, MTA Bioseal, and WellRoot ST after filling, retreating, and reshaping the root canals by using a novel microscopic method. Seventy-five mandibular incisors with single root canals were shaped with Protaper Next system (PTN; X2-25/0.06) The teeth were obturated with AH Plus labeled with Rhodamin B and MTA Bioseal or WellRoot ST sealer which were labeled with Fluo-3. Then the root canal fillings were removed with Protaper Universal Retreatment files. At the last stage, the teeth were reshaped with PTN (X3-30/0.07). The samples were transversally sectioned and examined using a Cytation 5 reader and Gen5 software regarding the mean and the maximum depth of sealer penetration. No significant difference was observed between the groups, except for the 6 mm level after reshaping the root canals (p < .05). It is not possible to completely remove the sealer remnants from the dentin walls even after reshaping the root canals. RESEARCH HIGHLIGHTS: Even after reshaping the root canals in the retreatment procedure, it is not possible to completely remove the filling residues of the epoxy-resin-based, calcium-silicate-based and MTA-based endodontic pastes from the dentin walls., (© 2023 Wiley Periodicals LLC.)

Aim: This study compared intracanal removal of filling as well as the frequency and volume of extruded material after retreatment with either HyFlex or Reciproc instruments in mandibular teeth from cadavers., Methodology: The root canals of 14 pairs of contralateral single-rooted teeth in mandibles of cadavers were instrumented with Reciproc R40 and filled using lateral compaction. The mandibles were scanned in a micro-computed tomographic (micro-CT) device before and after retreatment procedures. The contralateral teeth were assigned to two groups (n = 14) according to the retreatment protocol using either HyFlex or Reciproc instrument systems. In the HyFlex group, the HyFlex Remover instrument was worked 3 mm short of the working length (WL), followed by HyFlex CM 40.04 and 50.04 at the WL. In the Reciproc group, the R50 instrument was worked up at the coronal two thirds, followed by two more cycles until the WL was reached. Pre- and post-operative micro-CT images were analysed for extrusion and intracanal removal of filling material., Results: After retreatment, extrusion of filling material occurred in 11 (78%) and 14 (100%) teeth from HyFlex and Reciproc groups respectively (p > .05). A similar volume of extruded material was observed after retreatment with both systems (p > .05). A significant decrease in the intracanal filling volume was verified after retreatment with both tested systems (p < .05). However, residual filling material was found in all root canals, regardless of the system. The amount of filling material removed (HyFlex = 80.8%; Reciproc = 65.9%) and the operation time was similar between systems (p > .05)., Conclusions: A high frequency of filling material extrusion was observed after retreatment with the two systems in a cadaver model, with no significant difference between them. Both protocols obtained similar efficacy in filling material removal procedures, although none completely cleaned the canals., (© 2023 British Endodontic Society. Published by John Wiley & Sons Ltd.)

This study aimed to evaluate the effect of apicoectomy performed with a bur or an ultrasonic tip on the adaptation of the filling material to root canal dentin. Twenty human mandibular incisors were selected and prepared with a ProDesign Logic system up to diameter 40/.05. The root canals were filled with Bio-C Sealer (Angelus, PR, Brazil) using the single cone technique and were stored at 37ºC and 95% relative humidity for 7 days. After this period, the apicoectomy of the 3 millimeters of the root apex was performed using Endo-Z bur (Dentsply Sirona) or Bladesonic ultrasonic tip (Helse Ultrasonic, Santa Rosa de Viterbo, Brazil) (n=10). The specimens were scanned by micro-computed tomography (micro-CT; SkyScan 1176) with a voxel size of 8.74 µm after obturation and after apicoectomy. The percentage of voids at the interface between the filling material and the root canal wall was evaluated in the apical 4 mm of the root after apicoectomy, besides the time cutting to both devices. The data obtained were submitted to paired and unpaired t-tests (α = 0.05). Endo-Z and Bladesonic increased the percentage of voids between the filling material and the dentin after apicectomy (p<0.05), and they were similar (p>0.05). Endo-Z has a shorter time to perform apicoectomy compared to Bladesonic (p<0.05). Apicectomies with Endo-Z or Bladesonic could harm the material/dentin interface, while the Endo-Z bur was faster than the Bladesonic ultrasonic tip.

Background: Postoperative pain has remained a challenge for clinicians. This randomized superiority trial compared the levels of postoperative pain following the use of gutta-percha (GP) and sealer or mineral trioxide aggregate (MTA) as root canal filling materials in teeth with asymptomatic apical periodontitis., Methods: A total of 119 patients were initially evaluated in this two-arm, parallel-group, single-blind, superiority randomized trial. The inclusion criteria were participants aged 18-65 years with single-canal premolars diagnosed with asymptomatic apical periodontitis. The participants were finally divided into two groups using the permuted block randomization method. In the GP group (N = 46), the cleaned and shaped root canals were filled with gutta-percha and AH Plus sealer, while in the MTA group (N = 48), the cleaned and shaped root canals were filled with an MTA apical filling and a coronal gutta-percha and sealer. Patient pain level was measured 6, 12, 24, 48, and 72 h postoperatively using a 10-point visual analog scale (VAS). The data were analyzed by the chi-square, independent t, Friedman, and Mann-Whitney U tests., Results: The mean of VAS scores decreased significantly over time in both groups (P < 0.001). The mean VAS scores were significantly lower in the MTA filling group than in the other group (P < 0.05). Female patients reported higher VAS scores at 6- and 12-hour periods in both groups (P < 0.05)., Conclusion: MTA as a root canal filling material might be a valuable option for clinicians due to its low postoperative pain., Trial Registration: The trial protocol was registered at the Registry of Clinical Trials (IRCT20191104045331N1)., (© 2023. The Author(s).)

The aim of the study was to evaluate the impact of kinematics and irrigation protocols on the extrusion of apical debris during removal of different obturation techniques. A total of 144 single-rooted teeth were instrumented and obturated with Thermafil+AH Plus, Thermafil+AH Plus Bioceramic and single gutta-percha cone+AH Plus Bioceramic. Samples were divided according to the retreatment kinematics: continuous rotation or Jeni motion. Each sub-group was subjected to conventional irrigation or irrigation activated by EDDY. Extruded debris was collected in Eppendorf tubes, weighted and retreatment time was digitally recorded. Data were analysed with two-way ANOVA (p < 0.05). Debris extrusion was not significantly different between all groups. EDDY activation system and CanalPro Jeni required significantly longer time compared with other groups to remove Thermafil+AH Plus and single cone+AH Plus Bioceramic. Within current limitations, obturation technique, irrigation protocol and kinematics tested had no influence on apical extrusion debris, while they significantly impacted the retreatment time., (© 2023 The Authors. Australian Endodontic Journal published by John Wiley & Sons Australia, Ltd on behalf of Australian Society of Endodontology Inc.)

Background: During the course of a non-surgical orthograde endodontic retreatment, supplementary instrumentation is usually required for better removal of root canal filling material., Aim: The aim of this study was to assess the effectiveness of XP-Endo Finisher R in endodontic retreatment of oval root canals., Materials and Methods: The study was performed on extracted mandibular incisors preliminary cut at the cementoenamel junction. The root canals of 12 extracted lower central incisors were initially shaped with the rotary nickel-titanium system XP-Endo Shaper (30/.04) and filled with continuous waves of condensation. Root canal retreatment was performed with the МTwo Retreatment - R1 (15/.05) and R2 (25/.05) files, followed by the XP-Endo Finisher R (30/.00). Three micro-computed tomography scans were performed during the course of the experiment: 1) after the filling of the root canals, 2) after the first retreatment procedures, and 3) after the supplementary shaping. Kolmogorov-Smirnov test for normality and Friedman and Kruskal-Wallis tests for comparison of several independent samples., Results: There were no statistically significant differences in the percentage of removed obturation material in the different parts of the root canal after the use of Mtwo-R (P = 0.649) and XP-Endo Finisher R (P = 0.934). The additional instrumentation with XP-FR reduced the percentage of the remaining root canal filling insignificantly (P = 0.190)., Conclusions: The combined action of Mtwo-R retreatment files and XP-Endo Finisher R resulted in significant reduction of the amount of root canal filling material. Nevertheless, none of the examined rotary systems guaranteed its complete removal., (Copyright © 2023 Copyright: © 2023 Nigerian Journal of Clinical Practice.)

Objective: This study evaluated the effect of sealer type with various obturation techniques on the fracture resistance of root filled teeth., Materials and Methods: Eighty mandibular premolars were collected, and root canals of 70 of them were prepared by Mtwo system up to 40/04. Thirty teeth were obturated using TotalFill BC sealer, and 30 using AH Plus sealer, with one of the obturation techniques (N = 10), namely cold lateral compaction (CLC), warm vertical compaction (WVC), and single cone (SC). Ten teeth were left without obturation as a positive control, and the other 10 teeth were not prepared serving as a negative control. Teeth were stored for 3 weeks, and the crowns were separated and the roots were subjected to fracture test using a universal testing machine., Results: Data was analyzed by ANOVA followed by Tukey's test. Fracture resistance of the TotalFill groups was significantly higher than the AH Plus groups in each obturation technique, and SC had the highest fracture resistance regardless of sealer used (P < 0.05). Obturation of the root canal by TotaFill BC sealer increased the calcium/phosphorous ratio in the dentin of the root., Conclusions: Obturation with TotalFill BC sealer improved the fracture resistance of the roots more than AH Plus sealer, and obturation with SC resulted in higher fracture resistance than CLC and WVC., Clinical Relevance: Obturation of the root canal with Bioceramic sealer with single cone obturation technique could reduce the incidence of vertical root fracture., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objectives: To evaluate the amount of remaining filing material and apical debris extrusion after retreatment using Reciproc Blue, Hyflex EDM and ProTaper Retreatment Files., Materials and Methods: Thirty-six extracted permanent mandibular first molars with moderately curved mesial roots were selected. Mesiobuccal canals were prepared using the ProTaper Next system up to size X2 and filled using gutta-percha and Adseal sealer via cold lateral compaction. Teeth were randomly divided into three equal groups (n = 12): Group 1: Reciproc Blue (RB)(VDW, Germany), Group 2: Hyflex EDM (HEDM)(Coltene/Whaledent, Switzerland), Group 3: ProTaper Universal Retreatment file system + ProTaper Next file system (PTUR + PTN)( Dentsply Maillefer, Switzerland). Eppendorf tubes were used to collect the apically extruded debris. Cone-beam computed tomographic scans were taken prior to and after retreatment and the volume of remaining filling material was assessed at the coronal, middle and apical levels. Statistical analysis was performed using the Kruskal-Wallis test, Friedman's test and Wilcoxon Sign Rank test. Significance level was set at p value 0.05., Results: There were no statistically significant differences among the three groups in the reduction of the volume of the filling material or in the amount of apically extruded debris., Conclusion: All the tested filing systems showed similar efficacy in removing the filling material, however, none of them could achieve its complete removal. Apical extrusion of debris occurred with all the systems used with no significant difference between the three groups., (© 2023. The Author(s).)

Background: It is currently unknown whether rotary file motion affects the best outcome of root canal retreatment. This experimental study compared the efficacy, efficiency, and complications of single-use NiTi rotary files using continuous rotation, reciprocating, and adaptive motions in root canal filling removal in curved root canals. Reciproc blue R25 was used with reciprocating motion (RB), VDW.ROTATE retreatment files with continuous rotation (VR), and ProTaper NEXT X2 with continuous rotation (PTNc) or adaptive motion (PTNa)., Methods: Forty mesial root canals of extracted mandibular first and second molars with an angle of curvature between 20°-40° and a radius of curvature between 5 and 10 mm were collected. The specimens were instrumented and obturated with gutta-percha and AH Plus sealer using the continuous wave of condensation technique. The specimens were randomly divided into 4 retreatment groups (n = 10), RB, VR, PTNc, and PTNa. The percentage of root canal filling removal in each group was analyzed using Micro-Computed Tomography (µCT). The motor running time, total time, root canal complication, and instrument complication were recorded and statistically analyzed (p-value < 0.05)., Results: The pre-operative root canal curvature and root canal filling volume were comparable among groups. The percentage of root canal filling removal from the whole canal in the PTNc, RB, PTNa, and VR group was 98%, 96%, 95%, and 93%, respectively. A significant difference was observed between the PTNc and VR groups for the whole canal and the apical-third part. The motor running time and total time were significantly different between the groups. Instrument fracture was observed at 40% in the VR and 20% in the PTNa group, but none in the RB and PTNc groups., Conclusions: The ProTaper NEXT X2 with continuous rotation and RB files can be used with high efficacy and efficiency in curved root canal retreatment. Continuous rotation is more efficacious and efficient than adaptive motion when using the NiTi rotary file. Single file retreatment can be used in small canals with high efficacy, cost-effectiveness, and less time consumption., (© 2023. The Author(s).)

The success of endodontic restoration of badly compromised teeth depends on the quality of post and core placement and the extra-coronal restoration. Ensuring that students place posts to acceptable quality standards is therefore essential. The aim of this study was to radiographically evaluate post placement by final year undergraduate dental students and to identify any predictors of performance. Two hundred retrospectively and randomly selected posts placed by sixth year students were evaluated radiographically. Data on student gender; number and quality of radiographs; periapical pathology; tooth location; root canal treatment quality; amount of remaining gutta percha; gap between gutta percha and post; post-to-root width; crown-to-root ratio; and types of core material and crowns were recorded. Four criteria were used to grade post placement quality: (i) amount of remaining gutta percha; (ii) gap between gutta percha and post; (iii) post width to root ratio; and (iv) crown-to-root ratio. Assessments were scored to produce final grades. Data are presented using descriptive statistics and the chi-squared test was used to investigate whether student gender or tooth location were associated with final grade. Post and core quality was acceptable in most cases (97.5% were graded as adequate), with no differences in quality between male and female students nor according to tooth location (anterior, premolar, and molar). Just over half of radiographs were adequate quality (53.5%), while just under half were assessed as less than adequate (46.5%) due to cone cutting, overlap, shortening or elongation, although this did not affect formal assessment of post quality. General outcomes of post and core placement by undergraduate students were good, with few errors that might affect the prognosis and long-term survival of treated teeth. Providing undergraduate dental students with clear guidelines on when and how to take radiographs throughout the procedure may improve the quality of post and core treatment and reduce the risk of multiple unnecessary radiographic exposures. From the clinical perspective, although dental students generally place high quality posts and cores, it remains important to monitor the quality and performance of post placement as this determines the survival of compromised teeth., Competing Interests: The author have declared that no competing interests exist., (Copyright: © 2023 Khadijah M. Baik. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)