Search

Deep eutectic solvents (DES) have been regarded as green solvents in the biorefinery of lignocellulosic biomass, but long duration time has severely limited efficiency. The microwave-assisted DES pretreatment along with enzymatic hydrolysis and high-pressure homogenization process was proposed to produce lignin-containing cellulose nanofibrils (LCNF) from corncob. Benefiting from microwave-assisted DES pretreatment, the duration time was greatly shortened; meanwhile the effects of different kinds of DES on the resultant LCNF were investigated. The results showed that, the microwave-assisted DES fabricated LCNF (M-LCNF) was successfully obtained, exhibiting good nano size, thermal stability, colloidal stability, and fluorescence. M-LCNF was further introduced into phytic acid (PA) enhanced poly(acrylamide-co-acrylic acid) (P(AM-co-AA)) network and constructed composite conductive hydrogels (PLP). The obtained hydrogels exhibited good mechanical strength, UV blocking ability, fluorescence, and conductivity. A simple battery assembled with the resultant PLP as electrolyte had an out voltage of 2.41 V. The composite conductive hydrogel showed good sensing performance towards different stimuli (e.g., stretching and compression) and human motions in real time. It is expected that this research would provide an alternative way for green fabrication of LCNF and potential application of LCNF in flexible sensors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Lignocellulosic biomass exhibits a promising potential for production of carbon materials. Nitrogen and phosphorus co-doped carbon quantum dots (N,P-CQDs) were fabricated via (NH 4 ) 2 HPO 4 assisted hydrothermal treatment of cellulose pulp fibers. The as-prepared N,P-CQDs were characterized by HRTEM, FTIR, fluorescence and UV-vis, and then incorporated into g-C 3 N 4 (CN) through sonication and liquid deposition, forming N,P-CQDs/sonication treated g-C 3 N 4 (C-SCN) composites, which were then explored as photocatalysts. The photocatalytic ability of C-SCN towards model lignin was further analyzed. The results showed that, the fluorescence intensity and photoluminescence performance of N,P-CQDs were much higher than that of CQDs; the heterojunction was successfully constructed between the composites of N,P-CQDs and SCN; the incorporation of N,P-CQDs enhanced the visible light absorption, but reduced the band gap of the composite heterojunction; the resultant photocatalysts exhibited a good photocatalytic ability of model lignin via catalyze the fracture of β-O-4' ether bond and CC bond, i.e., the photocatalytic degradation ratio reached up to 95.5 %; and the photocatalytic reaction generated some valuable organics such as phenyl formate, benzaldehyde, and benzoic acid. This study would promote the high value-added utilization of lignocellulosic resources especially in the transformation of lignin, conforming the concept of sustainable development., Competing Interests: Declaration of competing interest The authors declare that there are no financial and personal conflict of interest with other organizations or people that would influence the work. This manuscript has not been considered for publication anywhere. All authors agree to submit it to International Journal of Biological Macromolecules., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Lignin is the most abundant natural aromatic macromolecule in the nature, but its high value-added utilization has been seriously hindered by the highly random and branched structures and the high difficulty in separation and purification. A microwave-assisted ternary deep eutectic solvent (DES) composed by formic acid, lactic acid and choline chloride was developed for lignin pretreatment. The effects of three types of DES on main characteristics of lignin were investigated, and the corresponding dissolution mechanism was proposed. The results showed that, the microwave-assisted ternary DES pretreatment showed an obvious improvement on main characteristics of regenerated lignin, e.g., a higher purity, lower molecular weight with reduced dispersity, improved thermal stability, higher phenolic hydroxyl content, and increased antioxidative activity in comparison with control. It is expected that the lignin macromolecular can be facile regulated and upgraded by the proposed ternary DES., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Photocatalytic degrading pollutants driven by visible-light irradiation has attracted tremendous attention. One strategy of preparing carbonized cellulose nanofibrils/Ti 3 C 2 T x MXene/g-C 3 N 4 (CMCN) as a photocatalyst was developed. The as-prepared CMCN was comprehensively characterized in terms of the chemical composition, chemical and crystal structure, morphology, and photoelectrochemical properties. The CMCN was explored as a photocatalyst and exhibited good photocatalytic performance in degrading MB (96.5%), RhB (95.4%), and TC (86.5%) under visible-light conditions. In addition, the CMCN as a photocatalyst exhibited good reusability and stability. It is found that the incorporation of cellulose nanofibrils provided a high carbon content, a high porosity, and a large specific surface area, enhanced the electron transfer, improved the photocatalytic performance, and ensured a semiconductor with a high stability. It is believed that this study would provide an effective approach to preparing a photocatalyst and broaden the potential application of cellulose nanofibrils in photocatalysis.

As the promising anode material of lithium-ion batteries (LIBs), SiO 2 has high theoretical capacity, but the volume expansion severely hinders its application. To address the challenge, inspired by the highly flexible spider-web architecture, the SiO 2 @carbonized polyaniline/carbonized 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibrils (SiO 2 @cPANI/cTOCNFs) composite was designed, and fabricated via carbonizing the freeze-dried SiO 2 @PANI/TOCNFs. The resultant SiO 2 @cPANI/cTOCNFs composite exhibited unique spider-web-like nanostructures, providing a double-layer carbon network to protect SiO 2 anode material. The results showed that, the SiO 2 @cPANI/cTOCNFs composite as anode material of LIBs offered a reversible capacity of 1103 mAh g -1 at a current density of 0.1 A g -1 after 200 cycles, and gave a capacity of 302 mAh g -1 after 1000 cycles at a current density of 1 A g -1 , exhibiting excellent cycling stability. This study provides a strategy of spider-web-inspired cellulose nanofibrils networking polyaniline-encapsulated silica nanoparticles as anode material of LIBs., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

An integration of different pretreatments is important to overcome recalcitrance and realize efficient bioconversion of lignocellulosic biomass. This study aims at the effects of combination of hydrothermal pretreatment and different chemi-mechanical pretreatments on enzymatic hydrolysis, and understanding the enzymes adsorption mechanism. The combination of hydrothermal and chemi-mechanical pretreatments effectively improved the enzymatic hydrolysis of poplar substrates, in which the enzymatic hydrolysis of substrates pretreated by hydrothermal pretreatment + Fenton pretreatment + mechanical refining (HFM) was the highest (92.39% of glucose conversion yield, and 20.88 g/L of glucose concentration). The substrates' main characteristics were obviously changed after combined pretreatments, such as swelling ability and specific surface area of substrates were increased. The Langmuir adsorption model (R 2  > 0.98) and pseudo second-order adsorption kinetic model (R 2 ≈1) were well suitable to describe the adsorption of enzymes on substrates, meanwhile the adsorption mechanism was summarized., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Lignocellulosic biomass-derived nanocellulose has been attracting more and more attentions due to its distinguished advantages and various applications, but its development has been restricted by the preparation especially with environmental friendly approach. Herein, lignin-containing cellulose nanofibrils (LCNF) was prepared from corncob via the combined pretreatment of choline chloride-based DES (ChCl-DES) and enzymatic hydrolysis followed by high-pressure homogenization. The effects of different types of ChCl-DES on the properties of LCNF were investigated and compared. The results showed that LCNF can be successfully fabricated through the combined pretreatments; the LCNF had an average diameter of 60-90 nm, exhibited good fluorescence, high thermal stability (up to 353 °C of T max ), hydrophobicity, stability, and redispersibility in organic solvent; AC-LCNF showed well oriented arrangement, the highest hydrophobicity and fluorescence, and distinguished redispersibility especially in DMSO. ChCl-DES as one green and sustainable approach would realize efficient separation and high value-added utilization of agricultural residues., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

An efficient and low-cost approach to preparing CNFs with succinic acid hydrolysis and NaClO 2 oxidation is explored. High-temperature-short-time hydrolysis can depolymerize the cellulose, whereas the dispersibility of the CNFs is hugely enhanced by NaClO 2 oxidation under alkaline condition. The degradation of cellulose in succinic acid hydrolysis follows first-order reaction kinetics and is severely influenced by the hydrolysis temperature, moreover, the molecular chains of the cellulose are seriously cracked under the optimized condition. The NaClO 2 oxidation greatly improves the zeta potential (-36.2 mV) and the dispersibility of the CNFs. The obtained CNFs have an ultimate yield of 94.6%, and the diameter distribution is mainly within 20-40 nm. In addition, some amount of carboxyl groups in the cellulose will be instead of the hydroxyl groups, and the crystallinity of the CNFs is significantly increased., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The laccase/TEMPO system was employed to oxidise the C6 primary hydroxyl group on the chitosan (CS) to form a carboxyl group to obtain oxidised chitosan (C-COS). The silver-oxidised chitosan complex(C-COS-Ag) was prepared by reacting C-COS with silver nitrate, then C-COS-Ag and cotton fibres were subjected to a reaction to prepare bacteriostatic fibres. FT-IR and XPS analysis showed that: Ag + and C-COS were combined in these forms: Ag, [Ag(NH 3 ) 2 ] OH, -COOAg, and Ag 2 O. C-COS-Ag was combined with cotton fibres by way of ester bonds. The inhibition zone of bacteriostatic fibres was all greater than 11 mm. After 50 washing tests, the bacteriostatic effect of bacteriostatic fibres remained at above 99 %. The amount of silver ions that had migrated from the bacteriostatic fibre was 3.336 mg/kg., (Copyright © 2021. Published by Elsevier Ltd.)

Research on nanocomposite film from natural polymers such as cellulose and chitosan is of great importance to promote the development and highly efficient utilization of green and renewable bioresources. In this study, enzymatic pretreatment cellulose nanofibril (ETCNF) derived from licorice residues was prepared, and further processed into nanocomposite film with addition of chitosan nanofibril (CHN). This study focused on the effects of CHN dosage on the main properties of resultant nanocomposite film in terms of crystallinity, thermal stability, light transmittance, hydrophobicity, mechanical properties, and antibacterial activity. The results showed that ETCNF/CHN nanocomposite film exhibited good hydrophobicity especially at higher dosage of CHN, good light transmittance and mechanical properties (tensile strain can reach 39.6 MPa for ETCNF/CHN-10.0%). The as-prepared ETCNF/CHN nanocomposite film also showed good antibacterial activity against Escherichia coli. It was expected that the ETCNF/CHN nanocomposite film would help to realize transformation and high value-added utilization of these biomass residues., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Understanding the adsorption behavior and the interaction between substrates and enzymes are critical to improving enzymatic hydrolysis efficiency and reducing bioconversion cost. Herein, the adsorption of cellulase on wet ground corncob residues was studied, and the effects of main characteristics of wet ground corncob residues on adsorption capacity were quantitatively analyzed with the combination of principal component analysis and multiple linear regression models. The results showed that the adsorption of cellulase on wet ground corncob residues was fitted well with Langmuir isotherm adsorption and pseudo second-order kinetics model, the adsorption rate and adsorption capacity were greatly enhanced with increasing grinding time; the multiple linear regression models describing the relationship between main characteristics of corncob residues and adsorption capacity to cellulase were established; the significance of these characteristics were in the following order: average particle size, crystallinity index, specific surface area, surface lignin concentration, water retention value, and surface charge density., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The combination of different pretreatment methods can effectively overcome recalcitrance of lignocellulosic biomass to ensure its highly efficient conversion into bio-based products. In this study, the combined pretreatments of chemical methods (hydrothermal treatment and Fenton treatment) with mechanical refining were used to improve the enzymatic hydrolysis efficiency of poplar branches. The results indicated that hydrothermal pretreatment and Fenton pretreatment can effectively improve the enzymatic hydrolysis of poplar substrates, e.g., the maximum glucose conversion yield and glucose concentration reached 92.4% and 20.8 g/L, respectively. The pre-hydrolysates contained some valuable components such as monosaccharides, oligosaccharides, acetic acid, furfural, and hydroxymethylfurfural. The main characteristics (specific surface area, water retention value, fines content, and surface lignin concentration) of poplar substrates were obviously changed by the combined pretreatment, which benefit the enzymatic hydrolysis., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Combining chemi-mechanical pulping with autohydrolysis pretreatment is an efficient and value-added utilization approach for lignocellulosic biomass in paper industry. To further promote the utilization of autohydrolyzed biomass in chemi-mechanical pulping, the color evolution of poplar wood chips in autohydrolysis pretreatment and its chromogenic mechanism were investigated by using CIELab color system, FT-IR, NMR and GPC. The results showed that the total color difference ΔE* increased obviously, which were remarkable as the combined hydrolysis factor (CHF) increased. The lignin content led to a more significant influence on the color of poplar wood chips than the extractives. The autohydrolysis pretreatment with a higher CHF accelerated the degradation and subsequent condensation of lignin, resulting in the formation of chromophoric groups, such as Hibbert ketone, quinones and quinone methides. It is of great significance for biomass refinery and paper industry to reveal the color evolution of poplar wood chips caused by autohydrolysis pretreatment from the point of view of chemical components' structure., (Copyright © 2019 Elsevier B.V. All rights reserved.)

It is important to make full utilization of industrial biomass residues. Pulp was prepared from licorice residues by soda-anthraquinone pulping followed by peroxyacetic acid bleaching. Cellulose nanofibril was obtained by enzymatic pretreatment followed by homogenization of the pulp (ETCNF). The effects of enzymatic pretreatment on ETCNF were investigated. Chitosan nanofibril (CHN) and lignin nanoparticles (LNPs) were prepared and used for ETCNF composites, respectively. The results showed that ETCNF exhibited clear nanofibrillar structure and a highly relative colloidal stability, and a much higher crystallinity index and thermal stability compared to TEMPO-medicated oxidized one; the cellulose composite films incorporated with CHN or LNPs exhibited good thermal stability and hydrophobicity. Compared with ETCNF film, ETCNF@LNPs-5.0% film showed higher UV-blocking ability and thermal stability, but reduced light transmittance, while ETCNF@CHN-5.0% film showed improved mechanical properties and similar light transmittance. This study would expend licorice residues as potential materials for CNF and its applications., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Under the situation of increasingly severe challenge of energy consumption, it is of great importance to make full use of bioresources such as forestry and agricultural residues. Herein, the corncob residues generated after processing corncob were enzymatically hydrolyzed to yield fermentable sugars. To overcome the recalcitrance of corncob residues, three kinds of pretreatment methods, i.e., sulfonation, PFI refining, and wet grinding, were applied; their effects on enzymatic hydrolysis and main characteristics of corncob residues substrate were investigated. The results showed that the enzymatic digestibility of the substrate was greatly enhanced by employing each method. The wet grinding exhibited obvious advantages, e.g., the conversion yield of cellulose to glucose and glucose concentration reached 96.7% and 32.2 g/L after 59 h of enzymatic hydrolysis, respectively. The improvement in enzymatic hydrolysis was mainly attributed to the altered characteristics of the substrate such as swelling ability, specific surface area, and particle size and distribution., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Research on biodegradable cellulose composite film with unique properties is of significance to alleviate current dependency on petroleum-based polymers, and to promote highly efficient utilization of lignocellulosic biomass. Lignin nanoparticles (LNPs) have been considered as a promising material for high value-added products. In this study, LNPs were prepared from corncob lignin via anti-solvent precipitation method, and then characterized by FTIR, TGA, AFM, and NMR. The CNF@CLNPs composite film was fabricated by blending CLNPs with CNF. The results showed that the CLNPs had an average diameter of about 118 nm, meanwhile the main structures and properties of corncob lignin were maintained. The CNF@CLNPs composite film exhibited a high ultraviolet resistance, and a good antibacterial activity against both Escherichia coli and Staphylococcus aureus. It is expected that the CNF@CLNPs composite film would have potential applications in outdoor materials and food packaging., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Lignocellulosic biomass is regarded as an ideal renewable resource for replacing traditional fossil fuels. Corncob residues (CRs) generated after hemicelluloses pre-extraction of corncobs were potential feedstocks to produce lignin-based products. Three lignin fractions, i.e., dioxane lignin (DL), milled-wood lignin (MWL), and enzymatic mild acidolysis lignin (EMAL), were isolated from CRs and characterized by HPLC, GPC, FT-IR, NMR, and TGA to reveal characteristics of CRs lignin to better understand its potential applications. The results showed that the yield of DL, MWL and EMAL were 12.8%, 14.7% and 15.6%, respectively. The molecular weight of DL, MWL and EMAL were 2001, 5391, and 2629 g/mol, respectively. The EMAL and MWL had similar structural features including guaiacyl and syringyl units, β-O-4' aryl ether, p-coumaric acids, ferulates, and phenylcoumarans, while the structure of DL was relatively simple. It is expected that this work will provide some useful information for the utilization of CRs in view of biorefinery., (Copyright © 2019. Published by Elsevier B.V.)

In this study, a strong and optically transparent nanopaper was fabricated from cellulose nanofibril (CNF) of corncob residues, an abundant byproduct from the processing of corncobs. Two processes were applied to successfully generate CNF from corncob residues. The resultant CNF mainly consists of fibers with diameter (height) of about 1.0 - 5.0 nm on average. The results showed that the as-prepared cellulose nanopaper (CNP) exhibited good strength, optical and thermal properties, with the tensile strength and tensile fracture strain of CNP being 65.3 MPa and 2.3%, respectively; the optical transmittance was close to 90% in the visible range; the highest degradation peak temperature was about 290 °C; the water contact angle at 30 s was 68.2°; A-CNP showed much higher optical properties and hydrophobicity, similar thermal ability, but slightly lower strength properties, compared with B-CNP. It can be seen that corncob residues are suitable choice of raw material for cellulose nanopaper, and is expected to find similar applications in flexible electronics and energy products as those of other raw materials used for this purpose., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Chemi-mechanical pulping, a typical high-yield pulping method, combined with autohydrolysis pretreatment prior to pulping is an efficient and value-added utilization method for biomass in pulp and paper industry. This study investigated the surface lignin changes of poplar sapwood chips in autohydrolysis pretreatment and their effect on the subsequent alkali impregnation for chemi-mechanical pulping. The results showed that the surface lignin content went up with the increase of autohydrolysis intensity, and that the existence of the surface lignin had nearly no impact on the subsequent alkali impregnation in making chemi-mechanical pulps (CMPs) compared to the volume porosity, which was validated by using the stepwise regression analysis. It can be further concluded that autohydrolysis can facilitate the subsequent alkali impregnation of the autohydrolyzed sapwood chips in making CMP, which would be of significance for the combination of biomass refinery and pulp and paper industry., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The presence of dyes in wastewater effluents made from the textile industry is a major environmental problem due to their complex structure and poor biodegradability. In this study, a cationic lignin polymer was synthesized via the free radical polymerization of lignin with [2-(methacryloyloxy) ethyl] trimethyl ammonium chloride (METAC) and used to remove anionic azo-dyes (reactive black 5, RB5, and reactive orange 16, RO16) from simulated wastewater. The effects of pH, salt, and concentration of dyes, as well as the charge density and molecular weight of lignin-METAC polymer on dye removal were examined. Results demonstrated that lignin-METAC was an effective flocculant for the removal of dye via charge neutralization and bridging mechanisms. The dye removal efficiency of lignin-METAC polymer was independent of pH. The dosage of the lignin polymer required for reaching the maximum removal had a linear relationship with the dye concentration. The presence of inorganic salts including NaCl, NaNO₃, and Na₂SO₄ had a marginal effect on the dye removal. Under the optimized conditions, greater than 98% of RB5 and 94% of RO16 were removed at lignin-METAC concentrations of 120 mg/L and 105 mg/L in the dye solutions, respectively.

This work investigated the changes in the physical structure of autohydrolyzed poplar sapwood chips and the effect on the subsequent alkali liquor diffusion properties for chemi-mechanical pulping (CMP). An alkali impregnation process was conducted by using the autohydrolyzed poplar sapwood with different levels of autohydrolysis intensity. The results showed that the volume porosity, water constraint capacity, and saturated water absorption of the autohydrolyzed poplar sapwood chips increased. Also, the effective capillary cross-sectional area (ECCSA) in the radial direction and the diffusion coefficients of NaOH solution in both the radial and axial directions all increased. Autohydrolysis pretreatment enhanced the alkali liquor diffusion properties in poplar sapwood chips, and the diffusion coefficient was increased more greatly in the radial direction than that in the axial direction., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

An efficient enzymatic hydrolysis of lignocellulosic biomass into fermentable sugars depends greatly on the pretreatment of raw materials. In this study, a combination of dilute acid pre-extraction and chemical-assisted mechanical refining was used to pretreat wood lignocellulosic biomass for subsequent enzymatic hydrolysis. This work analyzed the surface lignin concentration, specific surface area, crystallinity, fines content, fiber length, and kink index of the resultant pulp substrates and their effects on the enzymatic hydrolysis. The results showed that the combined pretreatment significantly enhanced the enzymatic hydrolysis efficiency, and the maximum glucose conversion yield and glucose concentration were 93.32% and 21.41 g L -1 , respectively. It is found that the surface lignin concentration, specific surface area, and fines content significantly affected the enzymatic hydrolysis., Competing Interests: The authors declare that they have no conflict of interest., (This journal is © The Royal Society of Chemistry.)

Dilute acid pre-extraction enhanced the mechanically refined poplar pulp substrates' enzymatic hydrolysis efficiency obviously. The results showed that the surface lignin distribution was changed significantly in residual wood chips and pulp substrates, and the surface lignin distribution showed important impact on the following enzymatic hydrolysis. Acid pre-extraction can lead to a redistribution of lignin in fiber cell walls, i.e., the lignin was degraded and migrated to fiber surface in the form of re-deposited lignin and pseudo-lignin. However, higher pre-extraction intensity was not desired due to the formation of redeposited lignin and pseudo-lignin. This study will help to reach a deeper understanding on the lignin distribution in the view of molecular and ultrastructure, and promote the development of a cost-efficient pretreatment strategy for biomass processing., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

This work is aimed at investigating the influence of changes in the content of hemicelluloses of the autohydrolyzed poplar sapwood on the subsequent alkali impregnation for chemi-mechanical pulping (CMP). An alkali impregnation process was conducted using the autohydrolyzed poplar sapwood with different content of hemicelluloses as raw materials. The results showed that both the amount of NaOH consumption and swelling degree of poplar sapwood increased with the removal of hemicelluloses, thus enhancing the alkali impregnation effectiveness. The hemicelluloses removal can also shorten the alkali impregnation time for the autohydrolyzed poplar sapwood to achieve the similar impregnation effectiveness of unautohydrolyzed poplar sapwood. All of these can be attributed to the fact that the hemicelluloses removal would result in the exposure of more free hydroxyl groups on the cellulose and an increase in the porosity of the fiber cell walls., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Autohydrolysis with different severity factors was performed on poplar wood chips prior to pulping, and the wettability, absorbility and the following impregnation of NaOH solution for the poplar wood chips were then investigated. The results showed that after autohydrolysis pretreatment the porosity, shrinkage and fiber saturation point (FSP) of the poplar wood chips were increased, while the surface contact angle decreased as the severity factor was increased. The autohydrolyzed chips absorbed more NaOH in impregnation that resulted in a low NaOH concentration in the bulk impregnation liquor (i.e., the impregnation liquor outside wood chips), while the concentration in the entrapped liquor (i.e., the impregnation liquor inside wood chips) was increased. Autohydrolysis substantially improved the effectiveness of alkali impregnation., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The hardwood bleached kraft pulp (HBKP) fibers were pretreated by PFI mill to obtain the substrates, the effects of fibrillation on HBKP fibers' enzymatic hydrolysis was studied. The results showed that the enzymatic hydrolysis efficiency was enhanced obviously by mechanical refining. The mechanical refining alterated the fibers' characteristics such as fibrillation degree, specific surface area, swelling ability, crystallinity, fiber length and fines content. All these factors correlating to the enzymatic hydrolysis were evaluated through mathematical analysis. Among these factors, the fibrillation degree has the profoundest impact on the enzymatic hydrolysis of wood fibers. Consequently, the mechanical refining aiming for a high fibrillation degree was feasible to enhance the enzymatic hydrolysis of lignocellulosic biomass., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Autohydrolysis pretreatment with different severity factors was performed on poplar chips prior to chemi-thermomechanical pulping (CTMP) in order to investigate the change in pH value and its effect on the autohydrolysis pretreatment. The results showed that the dissolution amount of acetic acid increased with raising the severity factor of the pretreatment and declining the size of poplar chips, respectively. Besides, a logarithmic relationship between the amount of acetic acid released in the autohydrolysis liquor (AHL) and pH value of the AHL was observed. The amounts of glucose and xylose (including those in the form of monomers, oligomers, and polysaccharides) as well as furfural and hydroxymethylfurfural (HMF) also depended on the pH value of the AHL to some extent., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Xylan is a part of hemicelluloses of woody materials and can be converted to value-added products such as flocculants for the textile industry. To assess the production of flocculants from hemicelluloses of woody materials, xylan was selected as a model and rendered cationic via copolymerization. In this study, the copolymerization reaction of xylan and [2-(methacryloyloxy) ethyl] trimethylammonium chloride (METAC) was optimized. The optimum parameters were 3mol/mol METAC/xylose, 3h reaction time, 80°C reaction temperature, pH 7 and 25g/L xylan concentration. The copolymer was characterized by a charge density analyzer, viscometer, gel permeation chromatography (GPC), light scattering instrument, Fourier transform infrared spectroscopy (FTIR) and an elemental analyzer. The application of the cationic xylan copolymer as a flocculant to decolorize the simulated reactive orange 16 azo-dye wastewater was evaluated. The results confirmed that, by having 160mg/L xylan-METAC concentration in the dye solution with the concentration of 100mg/L, 97.8% of dye could be removed., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Three different pre-extraction methods (i.e., acetic acid, sulfuric acid and sodium hydroxide) were used for the pretreatment followed by chemi-thermomechanical treatments and then enzymatic hydrolysis of wheat straw to produce fermentable sugars. The performance of enzymatic hydrolysis by the synergistic effect of pre-extractions and chemi-thermomechanical treatments was remarkable. Results showed that the pre-extraction combining with the chemi-thermomechanical treatments shorten the enzymatic hydrolysis time and improved the glucose yield at the same enzyme loadings. The chemical components, swelling ability, and crystallinity, as well as the surface morphology of the substrates were changed obviously. All of these changes can affect the accessibility of enzymes to cellulose in the substrates to a certain extent., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Nanocrystalline cellulose (CNC) as a renewable/sustainable material, has received much attention. Herein we studied CNC as carriers for a hydrophobic spirooxazine (SO)-based dye, 1,3-dihydro-1,3,3-trimethylspiro[2H-indole-2,3'-[3H]naphtha[2,1-b][1,4]oxazine], which may have potential applications in reversible memory photo-devices, textiles, photo-sensitive paper coatings, and inkjet printing inks. Due to the high cost and water-insolubility of this dye, it is desirable to improve its coloration efficiency and water-dispersibility. The experimental approach was to use CNC as carriers for the SO dye, thus obtaining a stable photochromic dye in aqueous systems. Transmission electron microscope (TEM) observation confirmed that the SO dye adsorbed on the surface of the CNC, which functioned as carriers for the photochromic dye. An impregnation process was adopted to anchor the dye onto cellulosic paper. It was found that the use of CNC resulted in a significant improvement in the SO coloration efficiency. The color stability and fatigue resistance were also studied. The use of CNC as carriers for a hydrophobic compound, its enhancement of associated properties, and its subsequent application were demonstrated., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

This study investigated the autohydrolysis pre-treatment prior to chemi-thermomechanical pulping (CTMP) process including the effects of autohydrolysis pretreatment with a lower severity on characteristics of the autohydrolysis liquor and hydrolyzed chips. The intensity of autohydrolysis, characterized by the severity factor, increased from 1.76 to 3.54, the hydrolyzed chips yield decreased from 99.0% to 86.7% and the xylose extraction yield increased from 0.8% to 44.0%. The content of holocellulose, pentosan and acid soluble lignin remained in the hydrolyzed chips decreased dramatically with increasing the treatment severity. After the autohydrolysis pretreatment, the resultant poplar chemi-thermomechanical pulp with a severity factor of 2.37 could obtain a 15.3 Nm/g tensile index, 58.6% ISO brightness and a 2.39 cm(3)/g bulk., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Spirooxazine (SO) is a class of important photochromic dyes for many applications, such as anti-counterfeiting printing, reversible memory photo devices and optical switching elements in molecular electronics. Since these dyes are expensive, improving their coloration efficiency in response to photo stimuli is of practical importance. In this study, a spirooxazine dye, 1,3-dihydro-1,3,3-trimethylspiro[2H-indole-2,3'-[3H]naphtha[2,1-b][1,4]oxazine], was dispersed into the substrate of a polystyrene acrylic latex emulsion to obtain a stable photochromic dye loaded latex. The photochromic latex was then applied on cellulose paper, and its coloration efficiency was significantly higher than the control (without the latex). Transmission electron microscope (TEM) observation revealed that the spirooxazine dye was well dispersed into the matrix of the latex particles, which functioned as a carrier/dispersant for the photochromic dye. Other results, including color stability, and fatigue resistance, were also discussed., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

A portion of hemicelluloses and acetic acid can be pre-extracted with dilute sulfuric acid prior to the aspen chemithermomechanical pulp process. The streams collected from the second press-impregnation stage after acid pre-extraction contain a significant amount of acid pre-extracted hemicelluloses. Most of the total sugars obtained from the pressate were xylan, in which xylan was further hydrolyzed to sugar monomers under the acid pre-extraction condition. To fully understand the characteristics of hemicelluloses yielded prior to pulping, the pre-extracted hemicelluloses were separated and characterized by FT-IR, (1)H NMR, and thermogravimetric analysis in this study. Most of the FT-IR bonds from the hemicelluloses agreed well with the other two spectra of birch xylan and CA0050 xylan, except a new absorption at 1734 cm(-1) contributed to acetyl groups. The hemicelluloses obtained from acid pre-extraction began to decompose significantly at about 225 °C, slightly lower in comparison with organosolv and alkaline hemicelluloses reported in the literature.

Pre-extraction of hemicelluloses prior to pulping and conversion of the extracted hemicelluloses to other by-products will provide additional revenues to traditional pulp and paper industry. The effects of hemicelluloses pre-extraction with sulfuric acid on aspen (Populus tremuloides) chemi-thermomechanical pulp (CTMP) properties were investigated in this study. The sulfuric acid pre-extraction resulted in a release of 11% of hemicelluloses (determined as xylan) and acetic acid, especially at the second press-impregnation stage. Compared with CTMP without acid pre-extraction, the acid pre-extraction significantly reduced refining energy to a given freeness, and the pulps produced from acid pre-extracted chips have lower shives, higher strength properties except zero-span breaking length, lower bulk, but lower brightness at a similar specific refining energy. This study provides useful information for integration of biorefinery in mechanical pulp mills in the future., (Copyright © 2011 Elsevier Ltd. All rights reserved.)