Search

Over the last two decades, proliferations of benthic cyanobacteria producing derivatives of anatoxin-a have been reported in rivers worldwide. Here, we follow up on such a toxigenic event happening in the Areuse river in Switzerland and investigate the diversity and genomics of major bloom-forming riverine benthic cyanobacteria. We show, using 16S rRNA-based community profiling, that benthic communities are dominated by Oscillatoriales. We correlate the detection of one Microcoleus sequence variant matching the Microcoleus anatoxicus species with the presence of anatoxin-a derivatives and use long-read metagenomics to assemble complete circular genomes of the strain. The main dihydro-anatoxin-a-producing strain in the Areuse is distinct from strains isolated in New Zealand, the USA, and Canada, but forms a monophyletic strain cluster with them with average nucleotide identity values close to the species threshold. Compared to the rest of the Microcoleus genus, the toxin-producing strains encode a 15 % smaller genome, lacking genes for the synthesis of some essential vitamins. Toxigenic mats harbor a distinct microbiome dominated by proteobacteria and bacteroidetes, which may support cyanobacterial growth by providing them with essential nutrients. We recommend that strains closely related to M. anatoxicus be monitored internationally in order to help predict and mitigate similar cyanotoxic events., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Diego Gonzalez reports financial support was provided by Swiss National Science Foundation. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Author(s).)

Pesticide metabolites are frequently detected in groundwater, often exceeding the concentrations of their parent pesticides. Ceasing the application of certain pesticides has often not led to the expected decrease in metabolite concentrations in groundwater, which is potentially caused by residues in soil. Whereas pesticide residues in soils are well-documented, there are only few studies about metabolite residues. We investigated if the soil/unsaturated zone can act as a long-term source for metabolites in groundwater by combining soil analysis, groundwater analysis and numerical modelling. The field study focused on the herbicide chloridazon (CLZ) and its frequently detected metabolites desphenyl-chloridazon (DPC) and methyl-desphenyl-chloridazon (MDPC) while in the model additional pesticides and metabolites were considered. In soil samples from an agricultural area, where the last CLZ application was 5 to 10 years ago, we observed 10 times (DPC: 0.22 - 7.4 µg kg -1 ) and 6 times (MDPC: 0.12 - 3.1 µg kg -1 ) higher metabolite concentrations compared to CLZ (< 0.050 - 1.0 µg kg -1 ). Calculations suggested that the majority of the metabolites (DPC: 63 - 96%, MDPC: 74 - 97%) were sorbed despite their lower sorption tendency. The metabolite retention was in particular related to the organic carbon content. The calculated pore water concentrations were highest in the deepest part of the soil profile (75 - 100 cm) with median concentrations of 3.6 and 1.7 µg L -1 for DPC and MDPC, respectively. The groundwater concentrations of DPC and MDPC were 3 to 3.5 times higher in monitoring wells downgradient from the agricultural zone than upgradient of it. This increase highlights the potential of soil and unsaturated zone as a long-term metabolite source after the application stop of pesticides, consistent with the calculated elevated pore water concentrations. Numerical flow and transport model simulations suggested that this input from soil and unsaturated zone can cause elevated metabolite concentrations (> 0.1 µg L -1 ) in groundwater over more than one decade. The study highlights that soil and unsaturated zone can act as a long-term source of pesticide metabolites even if they have much higher mobility than the parent compound., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Daniel Hunkeler reports financial support was provided by Federal Office for the Environment. Daniel Hunkeler reports financial support was provided by Swiss Gas and Water Industry Association (SGWA). Daniel Hunkeler reports financial support was provided by Canton of Zürich., (Copyright © 2024. Published by Elsevier Ltd.)

The solvent-based sampling method for collecting gas-phase volatile organic compounds (VOCs) and conducting compound-specific isotope analysis (CSIA) was deployed during a controlled field study. The solvent-based method used methanol as a sink to accumulate petroleum hydrocarbons during the sampling of soil air and effluent gas. For each gaseous sample collected, carbon isotope analysis (δ 13 C) was conducted for a selection of five VOCs (benzene, toluene, o-xylene, cyclopentane and octane) emitted by a synthetic hydrocarbon source emplaced in the subsurface. The δ 13 C values obtained for gaseous VOCs (collected from soil gas and effluent gas) were compared to measurements obtained for the same VOCs present in the source material (none aqueous phase liquid - NAPL) and dissolved in groundwater to evaluate the reliability of the solvent-based sampling method in providing accurate isotope measurements. Since the NAPL source was composed of only 12 VOCs, potential bias related to the analytical procedure (such as co-elution) were avoided, hence emphasizing on field-related bias. This field evaluation demonstrated the capacity of the solvent-based method to produce precise and accurate δ 13 C measurements. The isotopic discrepancies between the gaseous and the NAPL values were < 1 ‰ for 39 out of the 41 comparison points, thus deemed not statistically different based on a common isotopic uncertainty error of ±0.5 ‰. Moreover, the current field study is the first field study to report δ 13 C measurements for up to five gas-phase VOCs obtained from the same sample, which appears to be of interest for VOC fate or forensic studies. The possibility to use several VOC isotopic measurements enabled by the sampling method would contribute to strengthen the connection assessment between gaseous VOCs and the suspected emitting source. Accordingly, the field results presented herein support the application of this sampling methodology to conduct CSIA assessment in the frame of VOC vapor studies., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests. Daniel Hunkeler reports financial support was provided by Chevron Technology Center., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Climate change will have-and, in much of the world, is already having-a pronounced impact on alpine water resources. A deeper understanding of the future role of groundwater in alpine catchments, including quantification of climate change impacts on groundwater discharge, is vital for understanding the future of alpine water resources as a whole. Here, we develop and couple a geophysics-informed groundwater model with a net recharge model to investigate the impacts of climate change on a nival-regime alpine headwater catchment with significant unconfined Quaternary aquifer coverage. Flow in the groundwater-fed stream at the catchment outlet is analysed to determine changes in its annual dynamics. Comparing the periods 2020-2040 and 2080-2100 under ten RCP-8.5 climate models, we find a 35 % decrease in mean groundwater discharge and an increase in no-flow periods from ~0 % to 4.3 %. We also observe significant changes to the timing of monthly mean discharge maxima and minima, which shift ~1 month and ~5 months earlier, respectively. While groundwater has the potential to dampen the impacts of snow cover loss, currently perennial nival-regime alpine streams could be at risk of becoming intermittent by the end of the century. Our study underscores the increasingly critical role that groundwater will play in alpine catchments and emphasizes the need for quantitative understanding of the limits to its buffering capacity., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Knowledge of groundwater residence times (GRT; the time elapsed since surface water infiltration) between losing rivers and pumping wells is crucial for management of water resources in alluvial aquifers. The radioactive noble gas radon-222 ( 222 Rn) has been used for decades as a natural indicator of surface water infiltration, as it can provide quantitative information on GRT. However, models using 222 Rn as a tracer of GRT are often based on a set of highly simplifying assumptions, including spatially homogenous 222 Rn production and exclusively advective mass transport within the aquifer. In this paper, we use the integrated surface-subsurface hydrological model HydroGeoSphere (HGS) to simulate 222 Rn transport, production, and decay in a bank filtration context. Spatially variable 222 Rn production, based on experimental data, is explicitly considered. We show that variable 222 Rn production rates, coupled with hydrodispersive mixing of groundwater, may lead to large biases in GRT estimates. Under certain transient conditions however, changes in tracer-derived GRTs correlate well with changes in mean groundwater age. Whereas 222 Rn-derived GRTs may only be reliable under a narrow range of field conditions, 222 Rn may serve as a powerful tracer of changes in mean GRT even in complex and heterogenous environments., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Brominated organic compounds such as 1,2-dibromoethane (1,2-DBA) are highly toxic groundwater contaminants. Multi-element compound-specific isotope analysis bears the potential to elucidate the biodegradation pathways of 1,2-DBA in the environment, which is crucial information to assess its fate in contaminated sites. This study investigates for the first time dual C-Br isotope fractionation during in vivo biodegradation of 1,2-DBA by two anaerobic enrichment cultures containing organohalide-respiring bacteria (i.e., either Dehalococcoides or Dehalogenimonas ). Different ε bulk C values (-1.8 ± 0.2 and -19.2 ± 3.5‰, respectively) were obtained, whereas their respective ε bulk Br values were lower and similar to each other (-1.22 ± 0.08 and -1.2 ± 0.5‰), leading to distinctly different trends (Λ C-Br = Δδ 13 C/Δδ 81 Br ≈ ε bulk C /ε bulk Br ) in a dual C-Br isotope plot (1.4 ± 0.2 and 12 ± 4, respectively). These results suggest the occurrence of different underlying reaction mechanisms during enzymatic 1,2-DBA transformation, that is, concerted dihaloelimination and nucleophilic substitution (S N 2-reaction). The strongly pathway-dependent Λ C-Br values illustrate the potential of this approach to elucidate the reaction mechanism of 1,2-DBA in the field and to select appropriate ε bulk C values for quantification of biodegradation. The results of this study provide valuable information for future biodegradation studies of 1,2-DBA in contaminated sites.

Several types of laboratory experiments were conducted to evaluate isotope fractionation caused by phase transfer process for a selection of common environmental contaminants. Carbon and hydrogen isotope fractionation caused by vaporization of non-aqueous phase liquid (NAPL), by volatilization from water and by dissolution into an organic solvent (tetraethylene glycol dimethylether or TGDE) under equilibrium conditions was investigated with closed system experimental setups to isolate the air-liquid partitioning process. A selection of aromatic, aliphatic and chlorinated compounds along with one fuel oxygenate (methyl tert-butyl ether or MTBE) were evaluated to determine isotope enrichment factor related to respective phase transfer process. During NAPL vaporization, the residual mass of aromatic compounds, aliphatic compounds and MTBE became progressively depleted in heavy carbon and hydrogen isotopes. In contrast, during volatilization from water, the residual mass of aromatic compounds and MTBE dissolved in the water became progressively enriched in heavy hydrogen isotopes, whereas no significant change in carbon isotope was observed, except for MTBE showing a significant depletion. For the air-TGDE partitioning process, most of the aromatic compounds tested led to no significant carbon (except ethylbenzene) or hydrogen (except toluene and o-xylene) isotope fractionation. In contrast, significant carbon isotope fractionation was observed for aliphatic and chlorinated compounds and hydrogen isotope fractionation for aliphatic compounds, and are comparable to progressive NAPL vaporization in direction and magnitude. The isotope fractionation factors determined in this study are key for interpreting the change in isotope ratios when assessing the fate of gas-phase VOCs present in the soil air or when gas-phase VOCs are sampled using TGDE as the sink matrix. The results of this study contribute to expand the list of common environmental contaminants that can be assessed by the compound-specific isotope analysis (CSIA) method deployed in the frame of gas-phase studies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Deterioration of groundwater quality due to nitrate loss from intensive agricultural systems can only be mitigated if methods for in-situ monitoring of nitrate leaching under active farmers' fields are available. In this study, three methods were used in parallel to evaluate their spatial and temporal differences, namely ion-exchange resin-based Self-Integrating Accumulators (SIA), soil coring for extraction of mineral N (Nmin) from 0 to 90 cm in Mid-October (pre-winter) and Mid-February (post-winter), and Suction Cups (SCs) complemented by a HYDRUS 1D model. The monitoring, conducted from 2017 to 2020 in the Gäu Valley in the Swiss Central Plateau, covered four agricultural fields. The crop rotations included grass-clover leys, canola, silage maize and winter cereals. The monthly resolution of SC samples allowed identifying a seasonal pattern, with a nitrate concentration build-up during autumn and peaks in winter, caused by elevated water percolation to deeper soil layers in this period. Using simulated water percolation values, SC concentrations were converted into fluxes. SCs sampled 30% less N-losses on average compared to SIA, which collect also the wide macropore and preferential flows. The difference between Nmin content in autumn and spring was greater than nitrate leaching measured with either SIA or SCs. This observation indicates that autumn Nmin was depleted not only by leaching but also by plant and microbial N uptake and gaseous losses. The positive correlation between autumn Nmin content and leaching fluxes determined by either SCs or SIA suggests autumn Nmin as a useful relative but not absolute indicator for nitrate leaching. In conclusion, all three monitoring techniques are suited to indicate N leaching but represent different transport and cycling processes and vary in spatio-temporal resolution. The choice of monitoring method mainly depends (1) on the project's goals and financial budget and (2) on the soil conditions. Long-term data, and especially the combination of methods, increase process understanding and generate knowledge beyond a pure methodological comparison., (© 2021. The Author(s).)

Multielement isotope fractionation studies to assess pollutant transformation are well-established for point-source pollution but are only emerging for diffuse pollution by micropollutants like pesticides. Specifically, chlorine isotope fractionation is hardly explored but promising, because many pesticides contain only few chlorine atoms so that "undiluted" position-specific Cl isotope effects can be expected in compound-average data. This study explored combined Cl, N, and C isotope fractionation to sensitively detect biotic and abiotic transformation of the widespread herbicides and groundwater contaminants acetochlor, metolachlor, and atrazine. For chloroacetanilides, abiotic hydrolysis pathways studied under acidic, neutral, and alkaline conditions as well as biodegradation in two soils resulted in pronounced Cl isotope fractionation (ε Cl from -5.0 ± 2.3 to -6.5 ± 0.7‰). The characteristic dual C-Cl isotope fractionation patterns (Λ C-Cl from 0.39 ± 0.15 to 0.67 ± 0.08) reveal that Cl isotope analysis provides a robust indicator of chloroacetanilide degradation. For atrazine, distinct Λ C-Cl values were observed for abiotic hydrolysis (7.4 ± 1.9) compared to previous reports for biotic hydrolysis and oxidative dealkylation (1.7 ± 0.9 and 0.6 ± 0.1, respectively). The 3D isotope approach allowed differentiating transformations that would not be distinguishable based on C and N isotope data alone. This first data set on Cl isotope fractionation in chloroacetanilides, together with new data in atrazine degradation, highlights the potential of using compound-specific chlorine isotope analysis for studying in situ pesticide degradation.

Pesticide metabolites are frequently detected in groundwater at concentrations often exceeding those of their parent pesticides. A well-known example is the metabolites of chlorothalonil, a non-systematic, broad spectrum fungicide. Some of the chlorothalonil metabolites occur frequently and at elevated concentrations in groundwater, which is why the use of chlorothalonil was recently banned in the European Union. To estimate the long-term evolution of the concentration of the chlorothalonil metabolites in groundwater after this ban, it is important to know if metabolite residues in soil and unsaturated zone can affect the concentrations in groundwater. We developed and validated a method for the determination of 5 chlorothalonil metabolites in soil (R471811, R417888, SYN507900, SYN548580 and R611968), including those which are frequently detected in groundwater. The developed protocols, based on a solid phase extraction approach (for R471811, R417888, SYN507900, SYN548580) or a QuEChERS approach (for R611968) followed by UHPLC-MS/MS analysis, provided excellent sensitivity (LOQ of 0.5 µg/kg for all metabolites), precision (RSD<10 % at low, medium and high concentrations) and accuracy (84-115 %). In addition, we developed a simple but highly sensitive (LOQ of 5-10 ng/L) direct-injection method for the analysis of these 5 metabolites in water to compare their occurrence in soil and groundwater. The application of these methods to agricultural soil samples and groundwater samples showed that the detection frequency of the 5 chlorothalonil metabolites in soil and groundwater seems to be inversed and dependent on their sorption coefficient. The latter might control the amount of the chlorothalonil metabolites which is retained in the soil or which leaches towards groundwater. Our results provide insights to estimate the retention of the different chlorothalonil metabolites in soil and unsaturated zone and therefore, to assess the influence of the soil and unsaturated zone on the long-term concentration evolution of these metabolites in groundwater., Competing Interests: Declaration of Competing Interest The authors declare no competing interests., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

Compound-specific carbon isotope analysis (CSIA) is a powerful tool to track the origin and fate of organic subsurface contaminants including petroleum and chlorinated hydrocarbons and is typically applied to water samples. However, soil can form a significant contaminant reservoir. In soil samples, it can be challenging to recover sufficient amounts of volatile organic compounds (VOC) to perform CSIA. Soil samples often contain complex contaminant mixtures and gas chromatography combustion isotope ratio mass spectrometry (GC-C-IRMS) is highly dependent on good chromatographic separation due to the conversion to a single analyte. To extend the applicability of CSIA to complex volatile organic compound mixtures in soil samples, and to recover sufficient amounts of target compounds for carbon CSIA, we compared two soil extraction solvents, tetraglyme (TGDE) and methanol, and developed a heart-cutting two-dimensional GC-GC-C-IRMS method. We used purge & trap concentration of solvent-water mixtures to increase the amount of analyte delivered to the column and thus lower method detection limits. We optimized purge & trap and chromatographic parameters for twelve target compounds, including one suffering from poor purge efficiency. By using a 30 m thick-film non-polar column in the first and a 15 m polar column in the second dimension, we achieved good chromatographic separation for the target compounds in difficult matrices and high accuracy (trueness and precision) for carbon isotopic analysis. Tetraglyme extraction was shown to offer advantages over methanol for purge & trap concentration, leading to lower target compound method detection limits for CSIA of soil samples. The applicability of the developed method was demonstrated for a case study on soil extracts from a former manufacturing facility. Our approach extends the applicability of CSIA to an important matrix that often controls the long-term fate of contaminants in the subsurface., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

Isotopic fractionation of groundwater contaminants can occur due to degradation, diffusion and sorption. Of these, only degradation has been extensively explored, yet diffusive isotopic fractionation (DIF) and sorptive isotopic fractionation (SIF) can have significant effects on the isotopic enrichment of groundwater contaminants. Understanding how to mathematically describe and model these processes is vital to the correct interpretation of compound-specific isotope analysis (CSIA) data in the field. Here, models for these physical fractionation processes are developed and described, including the definition of a sorption enrichment factor. These models are then implemented numerically using inverse and finite-element methods to investigate two scenarios, diffusion-sorption and diffusion-sorption-advection, that have been measured in the laboratory. Concentration, δ 37 Cl, and δ 2 H data from cis-dichloroethene (cDCE) and trichloroethene (TCE) are used as inputs to the models. Unknown transport parameters including diffusive fractionation exponents are determined from an inverse modelling approach. DIF is shown to have a stronger influence on chlorine isotopologues than on hydrogen isotopologues. For both cDCE and TCE, the sorption enrichment factor of chlorine is found to be negative while that of hydrogen is positive. The presented approach and results provide novel tools and insight into DIF and SIF and underline that these processes should be taken into account when using CSIA to assess contaminant fate., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

This dataset describes the outcome of a laboratory trichloroethene (TCE) treatability experiment with liquid activated carbon and bioamendments. The treatability experiment included unamended microcosms, bioamended microcosms with a Dehalococcoides containing culture and electron donor, and bioamended microcosms including liquid activated carbon (PlumeStop®). Data were collected frequently over an 85-day experimental period. Data were collected for the following parameters: redox sensitive species, chlorinated ethenes, non-chlorinated end-products, electron donors, compound specific isotopes, specific bacteria and functional genes. The reductive dechlorination of TCE could be described by a carbon isotope enrichment factor (ε C ) of -7.1 ‰. In the amended systems, the degradation rates for the TCE degradation were 0.08-0.13 d -1 and 0.05-0.09 d -1 determined by concentrations and isotope fractionation, respectively. Dechlorination of cis-DCE was limited. This dataset assisted in identifying the impact of different bioamendments and activated carbon on biodegradation of chlorinated ethenes. The dataset is useful in optimising design and setup for future laboratory and field investigations. This study provides novel information on the effect of low dose liquid activated carbon on chlorinated ethenes degradation by applying isotopic and microbial techniques, and by linking the outcome to a field case study. The data presented in this article are related to the research article "Assessment of chlorinated ethenes degradation after field scale injection of activated carbon and bioamendments: Application of isotopic and microbial analyses" (Ottosen et al., 2021)., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships which have, or could be perceived to have, influenced the work reported in this article., (© 2021 The Authors. Published by Elsevier Inc.)

Over the last decade, activated carbon amendments have successfully been applied to retain chlorinated ethene subsurface contamination. The concept of this remediation technology is that activated carbon and bioamendments are injected into aquifer systems to enhance biodegradation. While the scientific basis of the technology is established, there is a need for methods to characterise and quantify the biodegradation at field scale. In this study, an integrated approach was applied to assess in situ biodegradation after the establishment of a cross sectional treatment zone in a TCE plume. The amendments were liquid activated carbon, hydrogen release donors and a Dehalococcoides containing culture. The integrated approach included spatial and temporal evaluations on flow and transport, redox conditions, contaminant concentrations, biomarker abundance and compound-specific stable isotopes. This is the first study applying isotopic and microbial techniques to assess field scale biodegradation enhanced by liquid activated carbon and bioamendments. The injection enhanced biodegradation from TCE to primarily cis-DCE. The Dehalococcoides abundances facilitated characterisation of critical zones with insufficient degradation and possible explanations. A conceptual model of isotopic data together with distribution and transport information improved process understanding; the degradation of TCE was insufficient to counteract the contaminant input by inflow into the treatment zone and desorption from the sediment. The integrated approach could be used to document and characterise the in situ degradation, and the isotopic and microbial data provided process understanding that could not have been gathered from conventional monitoring tools. However, quantification of degradation through isotope data was restricted for TCE due to isotope masking effects. The combination of various monitoring tools, applied frequently at high-resolution, with system understanding, was essential for the assessment of biodegradation in the complex, non-stationary system. Furthermore, the investigations revealed prospects for future research, which should focus on monitoring contaminant fate and microbial distribution on the sediment and the activated carbon., (Copyright © 2021 Elsevier B.V. All rights reserved.)

In groundwater, pesticide metabolites tend to occur more frequently and at higher concentrations than their parent pesticides, due to their higher mobility and persistence. These properties might also favor their transfer across surface water - groundwater interfaces. However, the effect of surface water - groundwater interactions on the metabolite occurrence in groundwater and pumping wells has so far received little attention. We investigated the spatial distribution of metabolites in an unconsolidated aquifer, which interacts with two surface water bodies originating from catchments with contrasting land use. We focused on metabolites of the herbicide chloridazon, namely desphenyl-chloridazon (DPC) and methyl-desphenyl-chloridazon (MDPC) and characterized surface water - groundwater interactions with various environmental tracers (e.g. electrical conductivity, stable water isotopes, wastewater tracers). In zones influenced by a river from a mountainous area, metabolite concentrations were low (median values ≤0.50 μg L -1 for DPC, ≤0.19 μg L -1 for MDPC). In contrast, high concentrations occurred in areas dominated by recharge from agricultural fields and/or influenced by a stream from an adjacent intensely farmed catchment (median values up to 1.9 μg L -1 for DPC and up to 0.75 μg L -1 for MDPC). An endmember analysis using hydro-chemical data suggested that about 20% of the DPC mass in a pumping well originated from the neighboring catchment and on its own would cause a concentration above 0.1 μg L -1 for DPC. Our findings highlight that the mobile metabolites can be imported from zones with intense agriculture outside of the exploited aquifer via surface-water groundwater interactions influencing the metabolite concentration level and long-term dynamics in the aquifer., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 The Authors. Published by Elsevier B.V. All rights reserved.)

The persistence of groundwater contaminants is influenced by several interacting processes. Physical, physico-chemical, and (bio-)chemical processes all influence the transport of contaminants in the subsurface. However, for a given hydrogeological system, it is generally unclear to which degree each of these phenomena acts as a control on plume behaviour. Here, we present a comprehensive investigation of these processes and their influences on plume behaviour and persistence in layered sedimentary systems. We investigate different scenarios that represent fundamental configurations of common contaminant situations. A confined aquifer over- and underlain by aquitard layers is investigated in a source-removal scenario and a constant-source equilibrium scenario. Additionally, an aquitard overlain and underlain by high permeability units is investigated in a source-removal scenario. In these investigations, we vary layer thickness, as well as parameters governing advection, (back-)diffusion, sorption, and degradation. Extensive analysis of these results enables quantification of the influence of these parameters on maximum down-gradient concentration, plume persistence duration, and plume spatial extent. Finally, parameter space dimensionality reduction is used to establish trends and regimes in which certain processes dominate as controls. A lower limit to plume extent as a function of a novel constructed parameter is also determined. These results provide valuable quantitative information for the assessment of the fate of groundwater contaminants and are applicable to a wide range of aqueous-phase solutes., Competing Interests: Declaration of competing interest The authors (Landon Halloran and Daniel Hunkeler) declare no competing interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Desphenylchloridazon (DPC), the main metabolite of the herbicide chloridazon (CLZ), is more water soluble and persistent than CLZ and frequently detected in water bodies. When assessing DPC transformation in the environment, results can be nonconclusive if based on concentration analysis alone because estimates may be confounded by simultaneous DPC formation from CLZ. This study investigated the fate of DPC by combining concentration-based methods with compound-specific C and N stable isotope analysis (CSIA). Additionally, DPC formation and transformation processes were experimentally deconvolved in a dedicated lysimeter study considering three scenarios. First, surface application of DPC enabled studying its degradation in the absence of CLZ. Here, CSIA provided evidence of two distinct DPC transformation processes: one shows significant changes only in 13 C/ 12 C, whereas the other involves changes in both 13 C/ 12 C and 15 N/ 14 N isotope ratios. Second, surface application of CLZ mimicked a realistic field scenario, showing that during DPC formation, 13 C/ 12 C ratios of DPC were depleted in 13 C relative to CLZ, while 15 N/ 14 N ratios remained constant. Finally, CLZ depth injection simulated preferential flow and demonstrated the importance of the topsoil for retaining DPC. The combination of the lysimeter study with CSIA enabled insights into DPC transformation in the field that are superior to those of studies of concentration trends.

Many chlorinated hydrocarbons have gained notoriety as persistent organic pollutants in the environment. Engineered and natural remediation efforts require a monitoring tool to track the progress of degradation processes. Compound-specific isotope analysis (CSIA) is a robust method to evaluate the origin and fate of contaminants in the environment and does not rely on concentration measurements. While carbon CSIA has established itself in the routine assessment of contaminated sites, studies incorporating chlorine isotopes have only recently become more common. Although some aspects of chlorine isotope analysis are more challenging than carbon isotope analysis, having additional isotopic data yields valuable information for contaminated site management. This review provides an overview of chlorine isotope fractionation of chlorinated contaminants in the subsurface by different processes and presents analytical techniques and unresolved challenges in chlorine isotope analysis. A summary of successful field applications illustrates the potential of using chlorine isotope data. Finally, approaches in modelling chlorine isotope fractionation due to degradation, diffusion, and sorption processes are discussed., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Atrazine is a frequently detected groundwater contaminant. It can be microbially degraded by oxidative dealkylation or by hydrolytic dechlorination. Compound-specific isotope analysis is a powerful tool to assess its transformation. In previous work, carbon and nitrogen isotope effects were found to reflect these different transformation pathways. However, chlorine isotope fractionation could be a particularly sensitive indicator of natural transformation since chlorine isotope effects are fully represented in the molecular average while carbon and nitrogen isotope effects are diluted by non-reacting atoms. Therefore, this study explored chlorine isotope effects during atrazine hydrolysis with Arthrobacter aurescens TC1 and oxidative dealkylation with Rhodococcus sp. NI86/21. Dual element isotope slopes of chlorine vs. carbon isotope fractionation (Λ = 1.7 ± 0.9 vs. Λ = 0.6 ± 0.1) and chlorine vs. nitrogen isotope fractionation (Λ = -1.2 ± 0.7 vs. Λ = 0.4 ± 0.2) provided reliable indicators of different pathways. Observed chlorine isotope effects in oxidative dealkylation (ε Cl = -4.3 ± 1.8‰) were surprisingly large, whereas in hydrolysis (ε Cl = -1.4 ± 0.6‰) they were small, indicating that C-Cl bond cleavage was not the rate-determining step. This demonstrates the importance of constraining expected isotope effects of new elements before using the approach in the field. Overall, the triple element isotope information brought forward here enables a more reliable identification of atrazine sources and degradation pathways.

The extent, mechanism(s), and rate of chlorinated ethene degradation in a large tetrachloroethene (PCE) plume were investigated in an extensive sampling campaign. Multiple lines of evidence for this degradation were explored, including compound-specific isotope analysis (CSIA), dual C-Cl isotope analysis, and quantitative real-time polymerase chain reaction (qPCR) analysis targeting the genera Dehalococcoides and Dehalogenimonas and the genes vcrA, bvcA, and cerA. A decade prior to this sampling campaign, the plume source was thermally remediated by steam injection. This released dissolved organic carbon (DOC) that stimulated microbial activity and created reduced conditions within the plume. Based on an inclusive analysis of minor and major sampling campaigns since the initial site characterization, it was estimated that reduced conditions peaked 4 years after the remediation event. At the time of this study, 11 years after the remediation event, the redox conditions in the aquifer are returning to their original state. However, the DOC released from the remediated source zone matches levels measured 3 years prior and plume conditions are still suitable for biotic reductive dechlorination. Dehalococcoides spp., Dehalogenimonas spp., and vcrA, bvcA, and cerA reductive dehalogenase genes were detected close to the source, and suggest that complete, biotic PCE degradation occurs here. Further downgradient, qPCR analysis and enriched δ 13 C values for cis-dichloroethene (cDCE) suggest that cDCE is biodegraded in a sulfate-reducing zone in the plume. In the most downgradient portion of the plume, lower levels of specific degraders supported by dual C-Cl analysis indicate that the biodegradation occurs in combination with abiotic degradation. Additionally, 16S rRNA gene amplicon sequencing shows that organizational taxonomic units known to contain organohalide-respiring bacteria are relatively abundant throughout the plume. Hydraulic conductivity testing was also conducted, and local degradation rates for PCE and cDCE were determined at various locations throughout the plume. PCE degradation rates from sampling campaigns after the thermal remediation event range from 0.11 to 0.35 yr -1 . PCE and cDCE degradation rates from the second to the third sampling campaigns ranged from 0.08 to 0.10 yr -1 and 0.01 to 0.07 yr -1 , respectively. This is consistent with cDCE as the dominant daughter product in the majority of the plume and cDCE degradation as the time-limiting step. The extensive temporal and spatial analysis allowed for tracking the evolution of the plume and the lasting impact of the source remediation and illustrates that the multiple lines of evidence approach is essential to elucidate the primary degradation mechanisms in a plume of such size and complexity., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A gas chromatography-single quadrupole mass spectrometry method was developed and validated for compound-specific chlorine isotope analysis (Cl-CSIA) of three chlorinated herbicides, atrazine, acetochlor, and metolachlor, which are widespread contaminants in the environment. For each compound, the two most abundant ions containing chlorine (202/200 for atrazine, 225/223 for acetochlor, and 240/238 for metolachlor) and a dwell time of 30 ms were determined as optimized MS parameters. A limit of precise isotope analysis for ethyl acetate solutions of 10 mg/L atrazine, 10 mg/L acetochlor, and 5 mg/L metolachlor could be reached with an associated uncertainty between 0.5 and 1‰. To this end, samples were measured 10-fold and bracketed with two calibration standards that covered a wide range of δ 37 Cl values and for which amplitudes matched those of the samples within 20% tolerance. The method was applied to investigate chlorine isotope fractionation during alkaline hydrolysis of metolachlor, which showed a shift in δ 37 Cl of +46‰ after 98% degradation, demonstrating that chlorine isotope fractionation could be a sensitive indicator of transformation processes even when limited degradation occurs. This method, combined with large-volume solid-phase extraction (SPE), allowed application of Cl-CSIA to environmentally relevant concentrations of widespread herbicides (i.e., 0.5-5 μg/L in water before extraction). Therefore, the combination of large-volume SPE and Cl-CSIA is a promising tool for assessing the transformation processes of these pollutants in the environment.

Compound-specific isotope analysis (CSIA) is a valuable tool for assessing the fate of organic pollutants in the environment. However, the requirement of sufficient analyte mass for precise isotope ratio mass spectrometry combined with prevailing low environmental concentrations currently limits comprehensive applications to many micropollutants. Here, we evaluate the upscaling of solid-phase extraction (SPE) approaches for routine CSIA of herbicides. To cover a wide range of polarity, a SPE method with two sorbents (a hydrophobic hypercrosslinked sorbent and a hydrophilic sorbent) was developed. Extraction conditions, including the nature and volume of the elution solvent, the amount of sorbent and the solution pH, were optimized. Extractions of up to 10 L of agricultural drainage water (corresponding to up to 200 000-fold pre-concentration) were successfully performed for precise and sensitive carbon and nitrogen CSIA of the target herbicides atrazine, acetochlor, metolachlor and chloridazon, and metabolites desethylatrazine, desphenylchloridazon and 2,6-dichlorobenzamide in the sub-μg L -1 -range. 13 C/ 12 C and 15 N/ 14 N ratios were measured by gas chromatography-isotope ratio mass spectrometry (GC/IRMS), except for desphenylchloridazon, for which liquid chromatography (LC/IRMS) and derivatization-GC/IRMS were used, respectively. The method validated in this study is an important step towards analyzing isotope ratios of pesticide mixtures in aquatic systems and holds great potential for multi-element CSIA applications to trace pesticide degradation in complex environments.

The widespread application of herbicides impacts surface water and groundwater. Metabolites (e.g., desphenylchloridazon from chloridazon) may be persistent and even more polar than the parent herbicide, which increases the risk of groundwater contamination. When parent herbicides are still applied, metabolites are constantly formed and may also be degraded. Evaluating their degradation on the basis of concentration measurements is, therefore, difficult. This study presents compound-specific stable-isotope analysis (CSIA) of nitrogen- and carbon-isotope ratios at natural abundances as an alternative analytical approach to track the origin, formation, and degradation of desphenylchloridazon (DPC), the major degradation product of the herbicide chloridazon. Methods were developed and validated for carbon- and nitrogen-isotope analysis (δ 13 C and δ 15 N) of DPC by liquid chromatography-isotope-ratio mass spectrometry (LC-IRMS) and derivatization gas chromatography-IRMS (GC-IRMS), respectively. Injecting standards directly onto an Atlantis LC-column resulted in reproducible δ 13 C-isotope analysis (standard deviation <0.5‰) by LC-IRMS with a limit of precise analysis of 996 ng of DPC on-column. Accurate and reproducible δ 15 N analysis with a standard deviation of <0.4‰ was achieved by GC-IRMS after derivatization of >100 ng of DPC with 160-fold excess of (trimethylsilyl)diazomethane. Application of the method to environmental-seepage water indicated that newly formed DPC could be distinguished from "old" DPC by the different isotopic signatures of the two DPC sources.

For the interpretation of stable isotope ratio trends in saturated geochemical systems, the magnitude of aqueous phase diffusion-induced isotope fractionation needs to be known. This study reviews how five diffusion models (Fick, Maxwell-Stefan, Einstein, Langevin, Mode-Coupling Theory Analysis (MCTA) of diffusion) predict isotope fractionation due to aqueous phase diffusion and compares them with experimental results. The reviewed diffusion models were not consistent regarding the prediction of the mass (m) dependency of the aqueous phase diffusion coefficient (D). The predictions range from a square root power law (D ∝ m -0.5 ) to an opposite mass dependency of D (D ∝ m β ). Experimental studies exhibited consistently a weak power law mass dependency of the diffusion coefficient (D ∝ m -β with β < 0.5) for the vast majority of dissolved species and a larger diffusion-induced isotope effect for low weight noble gases (D ∝ m -0.5 ). The weak power law mass dependency of D for the species other than low weight noble gases is consistent with the MCTA of diffusion. The MCTA suggests that the weak power law mass dependency of D originates from interplays between strongly mass dependent short-term and mass independent long-term solute-solvent interactions. The larger isotope fractionation for low weight noble gases could be attributed to quantum isotope effects significantly magnifying the aqueous phase diffusion-induced isotope fractionation. Our review shows, that except for low weight noble gases a weak power law mass dependency of D is likely the most adequate assumption for aqueous phase diffusion-induced isotope fractionation in geochemical systems., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

This study investigates how catchment properties influence low-flow dynamics. With 496 synthetic models composed of a bedrock and an alluvial aquifer, we systematically assess the impact of the hydraulic conductivity of both lithologies, of the hillslope and of the river slope on catchment dynamics. The physically based hydrogeological simulator HydroGeoSphere is employed, which allows obtaining a range of low-flow indicators. The hydraulic conductivity of the bedrock K bedrock , a proxy for transmissivity, is the only catchment property exerting an overall control on low flows and explains 60% of the variance of Q95/Q50. The difference in dynamics of catchments with same K bedrock depends on hillslope gradients and the alluvial aquifer properties. The buffering capacity of the bedrock is mainly related to K bedrock and the hillslope gradient. We thus propose the dimensionless bedrock productivity index (BPI) that combines these characteristics with the mean net precipitation. For bedrock only models, the BPI explains 82% of the variance of the ratio of Q95 to mean net precipitation. The alluvial aquifer can significantly influence low flows when the bedrock productivity is limited. Although our synthetic catchment setup is simple, it is far more complex than the available analytical approaches or conceptual hydrological models. The direct application of the results to existing catchments requires nevertheless careful consideration of the local geological topographic and climatic conditions. This study provides quantitative insight into the complex interrelations between geology, topography and low-flow dynamics and challenges previous studies which neglect or oversimplify geological characteristics in the assessment of low flows., (© 2018, National Ground Water Association.)

The effects of contaminant sources removal in 2005 (i.e. barrels, tank, pit and wastewater pipe sources) on carbon tetrachloride (CT) and chloroform (CF) concentration in groundwater were assessed at several areas of a fractured multi-contaminant aquifer (Òdena, Spain) over a long-term period (2010-2014). Changes in redox conditions, in these chlorinated methanes (CMs) concentration and in their carbon isotopic compositions (δ 13 C) were monitored in multilevel wells. δ 13 C values from these wells were compared to those obtained from sources (barrels, tank and pit before their removal, 2002-2005) and to commercial solvents values in literature. Additionally, CMs natural attenuation processes were identified by C-Cl isotope slopes (Λ). Analyses revealed the downstream migration of the pollutant focus and an efficient removal of DNAPLs in the pit source's influence area. However, the removal of the contaminated soil from former tank and wastewater pipe was incomplete as leaching from unsaturated zone was proved, evidencing these areas are still active sources. Nevertheless, significant CMs degradation was detected close to all sources and Λ values pointed to different reactions. For CT in the tank area, Λ value fitted with hydrogenolysis pathway although other possible reduction processes were also uncovered. Near the wastewater pipe area, CT thiolytic reduction combined with hydrogenolysis was derived. The highest CT degradation extent accounted for these areas was 72 ± 11% and 84 ± 6%, respectively. For CF, the Λ value in the pit source's area was consistent with oxidation and/or with transport of CF affected by alkaline hydrolysis from upstream interception trenches. In contrast, isotope data evidenced CF reduction in the tank and wastewater pipe influence areas, although the observed Λ slightly deviates from the reference values, likely due to the continuous leaching of CF degraded in the non-saturated zone by a mechanism different from reduction., (Copyright © 2018 Elsevier B.V. All rights reserved.)

A dual element CCl isotopic study was performed for assessing chlorinated methanes (CMs) abiotic transformation reactions mediated by iron minerals and Fe(0) to further distinguish them in natural attenuation monitoring or when applying remediation strategies in polluted sites. Isotope fractionation was investigated during carbon tetrachloride (CT) and chloroform (CF) degradation in anoxic batch experiments with Fe(0), with FeCl 2 (aq), and with Fe-bearing minerals (magnetite, Mag and pyrite, Py) amended with FeCl 2 (aq), at two different pH values (7 and 12) representative of field and remediation conditions. At pH 7, only CT batches with Fe(0) and Py underwent degradation and CF accumulation evidenced hydrogenolysis. With Py, thiolytic reduction was revealed by CS 2 yield and is a likely reason for different Λ value (Δδ 13 C/Δδ 37 Cl) comparing with Fe(0) experiments at pH 7 (2.9 ± 0.5 and 6.1 ± 0.5, respectively). At pH 12, all CT experiments showed degradation to CF, again with significant differences in Λ values between Fe(0) (5.8 ± 0.4) and Fe-bearing minerals (Mag, 2 ± 1, and Py, 3.7 ± 0.9), probably evidencing other parallel pathways (hydrolytic and thiolytic reduction). Variation of pH did not significantly affect the Λ values of CT degradation by Fe(0) nor Py. CF degradation by Fe(0) at pH 12 showed a Λ (8 ± 1) similar to that reported at pH 7 (8 ± 2), suggesting CF hydrogenolysis as the main reaction and that CF alkaline hydrolysis (13.0 ± 0.8) was negligible. Our data establish a base for discerning the predominant or combined pathways of CMs natural attenuation or for assessing the effectiveness of remediation strategies using recycled minerals or Fe(0)., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Predicting the fate of chloroethenes in groundwater is essential when evaluating remediation strategies. Such predictions are expected to be more accurate when incorporating isotopic parameters. Although secondary chlorine isotope effects have been observed during reductive dechlorination of chloroethenes, development of modelling frameworks and simulation has thus far been limited. We have developed a novel mathematical framework to simulate the C/Cl isotopic fractionation during reductive dechlorination of chloroethenes. This framework differs from the existing state of the art by incorporating secondary isotopic effects and considering both C and Cl isotopes simultaneously. A comprehensive general model (GM), which is expected to be the closest representation of reality thus far investigated, was implemented. A less computationally intensive simplified model (SM), with the potential for use in modelling of complex reactive transport scenarios, was subsequently validated based on its comparison to GM. The approach of GM considers all isotopocules (i.e. molecules differing in number and position of heavy and light isotopes) of each chloroethene as individual species, of which each is degraded at a different rate. Both models GM and SM simulated plausible C/Cl isotopic compositions of tetrachloroethene (PCE), trichloroethene (TCE) and cis-1,2-dichloroethene (cDCE) during sequential dechlorination when using experimentally relevant kinetic and isotopic parameters. The only major difference occurred in the case where different secondary isotopic effects occur at the different non-reacting positions when PCE is dechlorinated down to cDCE. This observed discrepancy stems from the unequal Cl isotope distribution in TCE that arises due to the occurrence of differential secondary Cl isotopic effects during transformation of PCE to TCE. Additionally, these models are shown to accurately reproduce experimental data obtained during reductive dechlorination by bacterial enrichments harbouring Sulfurospirillum spp. where secondary isotope effects are known to have occurred. These findings underscore a promising future for the development of reactive transport models that incorporate isotopic parameters., Competing Interests: The authors have declared that no competing interests exist.

This modeling study aims to investigate how reactive processes in aquitards impact plume persistence in adjacent aquifers. For that purpose the migration of a trichloroethene (TCE) plume in an aquifer originating from dense non-aqueous phase liquid (DNAPL) source dissolution and back-diffusion from an underlying reactive aquitard was simulated in a 2D-numerical model. Two aquitard degradation scenarios were modeled considering one-step degradation from TCE to cis-dichloroethene (cDCE): a uniform (constant degradation with aquitard depth) and a non-uniform scenario (decreasing degradation with aquitard depth) and were compared with a no-degradation scenario. In the no-degradation scenario, a long-term TCE tailing above the Maximum Contaminant Level (MCL) caused by back-diffusion after source removal was observed. In contrast, in the aquitard degradation scenarios, TCE back-diffusion periods were shorter, whereby the extent of back-diffusion reduction depended on the aquitard degradation depth and the rate. For high degradation rates (half-life: 30-80days), an aquitard degradation depth greater than 65cm prevented TCE plume persistence after source removal but generated a long-term tailing above the MCL for the produced cDCE. For slow degradation rates (half-life: <200days), TCE was only partially degraded after source removal, independent of the aquitard degradation depth, leading to a long-term dual contamination of the aquifer by cDCE and TCE. A sudden enrichment of 13 C in TCE and cDCE was observed after source removal in the uniform and non-uniform degradation scenarios that was distinct from δ 13 C patterns observed when aquifer degradation occurs (continuous enrichment of 13 C along the plume axis) and for when there is absence of degradation (no change of isotope ratios). This demonstrates that δ 13 C measurements in the aquifer can be used as a diagnostic tool to demonstrate aquitard degradation, which simplifies the identification of reactive processes in aquitards, as aquifers are usually easier to monitor than aquitards., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Field-derived anoxic microcosms were used to characterize chloroform (CF) and carbon tetrachloride (CT) natural attenuation to compare it with biostimulation scenarios in which vitamin B 12 was added (B 12 /pollutant ratio of 0.01 and 0.1) by means of by-products, carbon and chlorine compound-specific stable-isotope analysis, and the active microbial community through 16S rRNA MiSeq high-throughput sequencing. Autoclaved slurry controls discarded abiotic degradation processes. B 12 catalyzed CF and CT biodegradation without the accumulation of dichloromethane, carbon disulphide, or CF. The carbon isotopic fractionation value of CF (ƐC CF ) with B 12 was -14±4‰, and the value for chlorine (ƐCl CF ) was -2.4±0.4‰. The carbon isotopic fractionation values of CT (ƐC CT ) were -16±6 with B 12 , and -13±2‰ without B 12 ; and the chlorine isotopic fractionation values of CT (ƐCl CT ) were -6±3 and -4±2‰, respectively. Acidovorax, Ancylobacter, and Pseudomonas were the most metabolically active genera, whereas Dehalobacter and Desulfitobacterium were below 0.1% of relative abundance. The dual C-Cl element isotope slope (Λ=Δδ 13 C/Δδ 37 Cl) for CF biodegradation (only detected with B 12 , 7±1) was similar to that reported for CF reduction by Fe(0) (8±2). Several reductive pathways might be competing in the tested CT scenarios, as evidenced by the lack of CF accumulation when B 12 was added, which might be linked to a major activity of Pseudomonas stutzeri; by different chlorine apparent kinetic isotope effect values and Λ which was statistically different with and without B 12 (5±1 vs 6.1±0.5), respectively. Thus, positive B 12 effects such as CT and CF degradation catalyst were quantified for the first time in isotopic terms, and confirmed with the major activity of species potentially capable of their degradation. Moreover, the indirect benefits of B 12 on the degradation of chlorinated ethenes were proved, creating a basis for remediation strategies in multi-contaminant polluted sites., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The methodology of the solvent-based dissolution method used to sample gas phase volatile organic compounds (VOC) for compound-specific isotope analysis (CSIA) was optimized to lower the method detection limits for TCE and benzene. The sampling methodology previously evaluated by [1] consists in pulling the air through a solvent to dissolve and accumulate the gaseous VOC. After the sampling process, the solvent can then be treated similarly as groundwater samples to perform routine CSIA by diluting an aliquot of the solvent into water to reach the required concentration of the targeted contaminant. Among solvents tested, tetraethylene glycol dimethyl ether (TGDE) showed the best aptitude for the method. TGDE has a great affinity with TCE and benzene, hence efficiently dissolving the compounds during their transition through the solvent. The method detection limit for TCE (5±1μg/m 3 ) and benzene (1.7±0.5μg/m 3 ) is lower when using TGDE compared to methanol, which was previously used (385μg/m 3 for TCE and 130μg/m 3 for benzene) [2]. The method detection limit refers to the minimal gas phase concentration in ambient air required to load sufficient VOC mass into TGDE to perform δ 13 C analysis. Due to a different analytical procedure, the method detection limit associated with δ 37 Cl analysis was found to be 156±6μg/m 3 for TCE. Furthermore, the experimental results validated the relationship between the gas phase TCE and the progressive accumulation of dissolved TCE in the solvent during the sampling process. Accordingly, based on the air-solvent partitioning coefficient, the sampling methodology (e.g. sampling rate, sampling duration, amount of solvent) and the final TCE concentration in the solvent, the concentration of TCE in the gas phase prevailing during the sampling event can be determined. Moreover, the possibility to analyse for TCE concentration in the solvent after sampling (or other targeted VOCs) allows the field deployment of the sampling method without the need to determine the initial gas phase TCE concentration. The simplified field deployment approach of the solvent-based dissolution method combined with the conventional analytical procedure used for groundwater samples substantially facilitates the application of CSIA to gas phase studies., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Even though multi-element isotope fractionation patterns provide crucial information with which to identify contaminant degradation pathways in the field, those involving hydrogen are still lacking for many halogenated groundwater contaminants and degradation pathways. This study investigates for the first time hydrogen isotope fractionation during both aerobic and anaerobic biodegradation of 1,2-dichloroethane (1,2-DCA) using five microbial cultures. Transformation-associated isotope fractionation values (ε bulk H ) were -115 ± 18‰ (aerobic C-H bond oxidation), -34 ± 4‰ and -38 ± 4‰ (aerobic C-Cl bond cleavage via hydrolytic dehalogenation), and -57 ± 3‰ and -77 ± 9‰ (anaerobic C-Cl bond cleavage via reductive dihaloelimination). The dual-element C-H isotope approach (Λ C-H = Δδ 2 H/Δδ 13 C ≈ ε bulk H /ε bulk C , where Δδ 2 H and Δδ 13 C are changes in isotope ratios during degradation) resulted in clearly different Λ C-H values: 28 ± 4 (oxidation), 0.7 ± 0.1 and 0.9 ± 0.1 (hydrolytic dehalogenation), and 1.76 ± 0.05 and 3.5 ± 0.1 (dihaloelimination). This result highlights the potential of this approach to identify 1,2-DCA degradation pathways in the field. In addition, distinct trends were also observed in a multi- (i.e., Δδ 2 H versus Δδ 37 Cl versus Δδ 13 C) isotope plot, which opens further possibilities for pathway identification in future field studies. This is crucial information to understand the mechanisms controlling natural attenuation of 1,2-DCA and to design appropriate strategies to enhance biodegradation.

To use compound-specific isotope analysis for confidently assessing organic contaminant attenuation in the environment, isotope fractionation patterns associated with different transformation mechanisms must first be explored in laboratory experiments. To deliver this information for the common groundwater contaminant chloroform (CF), this study investigated for the first time both carbon and chlorine isotope fractionation for three different engineered reactions: oxidative C-H bond cleavage using heat-activated persulfate, transformation under alkaline conditions (pH ∼ 12) and reductive C-Cl bond cleavage by cast zerovalent iron, Fe(0). Carbon and chlorine isotope fractionation values were -8 ± 1‰ and -0.44 ± 0.06‰ for oxidation, -57 ± 5‰ and -4.4 ± 0.4‰ for alkaline hydrolysis (pH 11.84 ± 0.03), and -33 ± 11‰ and -3 ± 1‰ for dechlorination, respectively. Carbon and chlorine apparent kinetic isotope effects (AKIEs) were in general agreement with expected mechanisms (C-H bond cleavage in oxidation by persulfate, C-Cl bond cleavage in Fe(0)-mediated reductive dechlorination and E1 CB elimination mechanism during alkaline hydrolysis) where a secondary AKIE Cl (1.00045 ± 0.00004) was observed for oxidation. The different dual carbon-chlorine (Δδ 13 C vs Δδ 37 Cl) isotope patterns for oxidation by thermally activated persulfate and alkaline hydrolysis (17 ± 2 and 13.0 ± 0.8, respectively) vs reductive dechlorination by Fe(0) (8 ± 2) establish a base to identify and quantify these CF degradation mechanisms in the field.

Compound-specific isotope analysis (CSIA) is increasingly used to evaluate the origin and fate of petroleum hydrocarbons in the environment. However, as samples often contain a complex mixture of compounds and the method requires a full chromatographic separation, it can be challenging to obtain accurate and precise isotope values. In this study, in order to develop a method to analyze carbon isotopes in benzene, toluene, ethylbenzene, and xylenes (BTEX) in complex environmental samples, a two-dimensional heart-cutting gas chromatograph (GC) was hyphenated to an isotope ratio mass spectrometer (IRMS). The focus was placed on benzene and toluene, which are the main compounds of concern in contaminated sites. A full separation for BTEX was successfully achieved using a 60m polar column in the first dimension and a 30m non-polar column in the second dimension. Accuracy and precision of carbon isotope measurements of standards were not impacted by the new setup compared to classic one-dimensional (1D) GC-C-IRMS. For benzene and toluene, precision remained very good (≤0.2‰) for concentrations comprised between 5 and 20μg/L. A high matrix load did not influence the precision and accuracy of isotope measurements. The method was tested on several samples from two different field sites. For all samples tested, full chromatographic baseline resolution was achieved for benzene and toluene. Spatial variability of isotopes values linked to biodegradation was evidenced for one field site. This new 2D-GC-C-IRMS method will broaden the spectrum of samples suitable for isotope analysis and will be therefore able to give new insights into attenuation processes of BTEX in contaminated sites or source fingerprinting., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Compound-specific chlorine isotope analysis of tetrachloromethane (CCl 4 ) and trichloromethane (CHCl 3 ) was explored by both, gas chromatography-isotope ratio mass spectrometry (GC-IRMS) and GC-quadrupole MS (GC-qMS), where GC-qMS was validated in an interlaboratory comparison between Munich and Neuchâtel with the same type of commercial GC-qMS instrument. GC-IRMS measurements analyzed CCl isotopologue ions, whereas GC-qMS analyzed the isotopologue ions CCl 3 , CCl 2 , CCl (of CCl 4 ) and CHCl 3 , CHCl 2 , CHCl (of CHCl 3 ), respectively. Lowest amount dependence (good linearity) was obtained (i) in H-containing fragment ions where interference of 35 Cl- to 37 Cl-containing ions was avoided; (ii) with tuning parameters favoring one predominant rather than multiple fragment ions in the mass spectra. Optimized GC-qMS parameters (dwell time 70 ms, 2 most abundant ions) resulted in standard deviations of 0.2‰ (CHCl 3 ) and 0.4‰ (CCl 4 ), which are only about twice as large as 0.1‰ and 0.2‰ for GC-IRMS. To compare also the trueness of both methods and laboratories, samples from CCl 4 and CHCl 3 degradation experiments were analyzed and calibrated against isotopically different reference standards for both CCl 4 and CHCl 3 (two of each). Excellent agreement confirms that true results can be obtained by both methods provided that a consistent set of isotopically characterized reference materials is used.

Thermal tetrachloroethene (PCE) remediation by steam injection in a sandy aquifer led to the release of dissolved organic carbon (DOC) from aquifer sediments resulting in more reduced redox conditions, accelerated PCE biodegradation, and changes in microbial populations. These changes were documented by comparing data collected prior to the remediation event and eight years later. Based on the premise that dual C-Cl isotope slopes reflect ongoing degradation pathways, the slopes associated with PCE and TCE suggest the predominance of biotic reductive dechlorination near the source area. PCE was the predominant chlorinated ethene near the source area prior to thermal treatment. After thermal treatment, cDCE became predominant. The biotic contribution to these changes was supported by the presence of Dehalococcoides sp. DNA (Dhc) and Dhc targeted rRNA close to the source area. In contrast, dual C-Cl isotope analysis together with the almost absent VC (13)C depletion in comparison to cDCE (13)C depletion suggested that cDCE was subject to abiotic degradation due to the presence of pyrite, possible surface-bound iron (II) or reduced iron sulphides in the downgradient part of the plume. This interpretation is supported by the relative lack of Dhc in the downgradient part of the plume. The results of this study show that thermal remediation can enhance the biodegradation of chlorinated ethenes, and that this effect can be traced to the mobilisation of DOC due to steam injection. This, in turn, results in more reduced redox conditions which favor active reductive dechlorination and/or may lead to a series of redox reactions which may consecutively trigger biotically induced abiotic degradation. Finally, this study illustrates the valuable complementary application of compound-specific isotopic analysis combined with molecular biology tools to evaluate which biogeochemical processes are taking place in an aquifer contaminated with chlorinated ethenes., (Copyright © 2016 Elsevier B.V. All rights reserved.)

This field and modeling study aims to reveal if degradation of chlorinated hydrocarbons in low permeability sediments can be quantified using compound-specific isotope analysis (CSIA). For that purpose, the well-characterized Borden research site was selected, where an aquifer-aquitard system was artificially contaminated by a three component chlorinated solvent mixture (tetrachloroethene (PCE) 45 vol %, trichloroethene (TCE) 45 vol %, and chloroform (TCM) 10 vol %). Nearly 15 years after the contaminant release, several high-resolution concentration and CSIA profiles were determined for the chlorinated hydrocarbons that had diffused into the clayey aquitard. The CSIA profiles showed large shifts of carbon isotope ratios with depth (up to 24‰) suggesting that degradation occurs in the aquitard despite the small pore sizes. Simulated scenarios without or with uniform degradation failed to reproduce the isotope data, while a scenario with decreasing degradation with depth fit the data well. This suggests that nutrients had diffused into the aquitard favoring stronger degradation close to the aquifer-aquitard interface than with increasing depth. Moreover, the different simulation scenarios showed that CSIA profiles are more sensitive to different degradation conditions compared to concentration profiles highlighting the power of CSIA to constrain degradation activities in aquitards.

Compound-specific isotope analysis (CSIA) is a powerful tool to track contaminant fate in groundwater. However, the application of CSIA to chlorinated ethanes has received little attention so far. These compounds are toxic and prevalent groundwater contaminants of environmental concern. The high susceptibility of chlorinated ethanes like 1,1,1-trichloroethane (1,1,1-TCA) to be transformed via different competing pathways (biotic and abiotic) complicates the assessment of their fate in the subsurface. In this study, the use of a dual C-Cl isotope approach to identify the active degradation pathways of 1,1,1-TCA is evaluated for the first time in an aerobic aquifer impacted by 1,1,1-TCA and trichloroethylene (TCE) with concentrations of up to 20 mg/L and 3.4 mg/L, respectively. The reaction-specific dual carbon-chlorine (C-Cl) isotope trends determined in a recent laboratory study illustrated the potential of a dual isotope approach to identify contaminant degradation pathways of 1,1,1-TCA. Compared to the dual isotope slopes (Δδ(13)C/Δδ(37)Cl) previously determined in the laboratory for dehydrohalogenation/hydrolysis (DH/HY, 0.33 ± 0.04) and oxidation by persulfate (∞), the slope determined from field samples (0.6 ± 0.2, r(2) = 0.75) is closer to the one observed for DH/HY, pointing to DH/HY as the predominant degradation pathway of 1,1,1-TCA in the aquifer. The observed deviation could be explained by a minor contribution of additional degradation processes. This result, along with the little degradation of TCE determined from isotope measurements, confirmed that 1,1,1-TCA is the main source of the 1,1-dichlorethylene (1,1-DCE) detected in the aquifer with concentrations of up to 10 mg/L. This study demonstrates that a dual C-Cl isotope approach can strongly improve the qualitative and quantitative assessment of 1,1,1-TCA degradation processes in the field., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A pipeline transporting crude-oil broke in a nature reserve in 2009 and spilled 5100 m(3) of oil that partly reached the aquifer and formed progressively a floating oil lens. Groundwater monitoring started immediately after the spill and crude-oil recovery by dual pump-and-skim technology was operated after oil lens formation. This study aimed at documenting the implementation of redox-specific natural attenuation processes in the saturated zone and at assessing whether dissolved compounds were degraded. Seven targeted water sampling campaigns were done during four years in addition to a routine monitoring of hydrocarbon concentrations. Liquid oil reached the aquifer within 2.5 months, and anaerobic processes, from denitrification to reduction of sulfate, were observable after 8 months. Methanogenesis appeared on site after 28 months. Stable carbon isotope analyses after 16 months showed maximum shifts in δ(13)C of +4.9±0.22‰ for toluene, +2.4±0.19‰ for benzene and +0.9±0.51‰ for ethylbenzene, suggesting anaerobic degradation of these compounds in the source zone. Estimations of fluxes of inorganic carbon produced by biodegradation revealed that, in average, 60% of inorganic carbon production was attributable to sulfate reduction. This percentage tended to decrease with time while the production of carbon attributable to methanogenesis was increasing. Within the investigation time frame, mass balance estimations showed that biodegradation is a more efficient process for control of dissolved concentrations compared to pumping and filtration on an activated charcoal filter., (Copyright © 2015 Elsevier B.V. All rights reserved.)

This study investigates dual C-Cl isotope fractionation during 1,1,1-TCA transformation by heat-activated persulfate (PS), hydrolysis/dehydrohalogenation (HY/DH) and Fe(0). Compound-specific chlorine isotope analysis of 1,1,1-TCA was performed for the first time, and transformation-associated isotope fractionation ε bulk C and ε bulk Cl values were -4.0 ± 0.2‰ and no chlorine isotope fractionation with PS, -1.6 ± 0.2‰ and -4.7 ± 0.1‰ for HY/DH, -7.8 ± 0.4‰ and -5.2 ± 0.2‰ with Fe(0). Distinctly different dual isotope slopes (Δδ13C/Δδ37Cl): ∞ with PS, 0.33 ± 0.04 for HY/DH and 1.5 ± 0.1 with Fe(0) highlight the potential of this approach to identify abiotic degradation pathways of 1,1,1-TCA in the field. The trend observed with PS agreed with a C-H bond oxidation mechanism in the first reaction step. For HY/DH and Fe(0) pathways, different slopes were obtained although both pathways involve cleavage of a C-Cl bond in their initial reaction step. In contrast to the expected larger primary carbon isotope effects relative to chlorine for C-Cl bond cleavage, ε bulk C < ε bulk Cl was observed for HY/DH and in a similar range for reduction by Fe(0), suggesting the contribution of secondary chlorine isotope effects. Therefore, different magnitude of secondary chlorine isotope effects could at least be partly responsible for the distinct slopes between HY/DH and Fe(0) pathways. Following this dual isotope approach, abiotic transformation processes can unambiguously be identified and quantified.

Dual isotope slopes are increasingly used to identify transformation pathways of contaminants. We investigated if reductive dechlorination of tetrachloroethene (PCE) by consortia containing bacteria with different reductive dehalogenases (rdhA) genes can lead to variable dual C-Cl isotope slopes and if different slopes also occur in the field. Two bacterial enrichments harboring Sulfurospirillum spp. but different rdhA genes yielded two distinct δ(13)C to δ(37)Cl slopes of 2.7 ± 0.3 and 0.7 ± 0.2 despite a high similarity in gene sequences. This suggests that PCE reductive dechlorination could be catalyzed according to at least two distinct reaction mechanisms or that rate-limiting steps might vary. At two field sites, two distinct dual isotope slopes of 0.7 ± 0.3 and 3.5 ± 1.6 were obtained, each of which fits one of the laboratory slopes within the range of uncertainty. This study hence provides additional insight into multiple reaction mechanisms underlying PCE reductive dechlorination. It also demonstrates that caution is necessary if a dual isotope approach is used to differentiate between transformation pathways of chlorinated ethenes.

This study investigates dual element isotope fractionation during aerobic biodegradation of 1,2-dichloroethane (1,2-DCA) via oxidative cleavage of a C-H bond (Pseudomonas sp. strain DCA1) versus C-Cl bond cleavage by S(N)2 reaction (Xanthobacter autotrophicus GJ10 and Ancylobacter aquaticus AD20). Compound-specific chlorine isotope analysis of 1,2-DCA was performed for the first time, and isotope fractionation (ε(bulk)(Cl)) was determined by measurements of the same samples in three different laboratories using two gas chromatography-isotope ratio mass spectrometry systems and one gas chromatography-quadrupole mass spectrometry system. Strongly pathway-dependent slopes (Δδ13C/Δδ37Cl), 0.78 ± 0.03 (oxidation) and 7.7 ± 0.2 (S(N)2), delineate the potential of the dual isotope approach to identify 1,2-DCA degradation pathways in the field. In contrast to different ε(bulk)(C) values [-3.5 ± 0.1‰ (oxidation) and -31.9 ± 0.7 and -32.0 ± 0.9‰ (S(N)2)], the obtained ε(bulk)(Cl) values were surprisingly similar for the two pathways: -3.8 ± 0.2‰ (oxidation) and -4.2 ± 0.1 and -4.4 ± 0.2‰ (S(N)2). Apparent kinetic isotope effects (AKIEs) of 1.0070 ± 0.0002 (13C-AKIE, oxidation), 1.068 ± 0.001 (13C-AKIE, S(N)2), and 1.0087 ± 0.0002 (37Cl-AKIE, S(N)2) fell within expected ranges. In contrast, an unexpectedly large secondary 37Cl-AKIE of 1.0038 ± 0.0002 reveals a hitherto unrecognized involvement of C-Cl bonds in microbial C-H bond oxidation. Our two-dimensional isotope fractionation patterns allow for the first time reliable 1,2-DCA degradation pathway identification in the field, which unlocks the full potential of isotope applications for this important groundwater contaminant.

The fate and treatability of 1,1,1-TCA by natural and enhanced reductive dechlorination was studied in laboratory microcosms. The study shows that compound-specific isotope analysis (CSIA) identified an alternative 1,1,1-TCA degradation pathway that cannot be explained by assuming biotic reductive dechlorination. In all biotic microcosms 1,1,1-TCA was degraded with no apparent increase in the biotic degradation product 1,1-DCA. 1,1,1-TCA degradation was documented by a clear enrichment in (13)C in all biotic microcosms, but not in the abiotic control, which suggests biotic or biotically mediated degradation. Biotic degradation by reductive dechlorination of 1,1-DCA to CA only occurred in bioaugmented microcosms and in donor stimulated microcosms with low initial 1,1,1-TCA or after significant decrease in 1,1,1-TCA concentration (after∼day 200). Hence, the primary degradation pathway for 1,1,1-TCA does not appear to be reductive dechlorination via 1,1-DCA. In the biotic microcosms, the degradation of 1,1,1-TCA occurred under iron and sulfate reducing conditions. Biotic reduction of iron and sulfate likely resulted in formation of FeS, which can abiotically degrade 1,1,1-TCA. Hence, abiotic degradation of 1,1,1-TCA mediated by biotic FeS formation constitute an explanation for the observed 1,1,1-TCA degradation. This is supported by a high 1,1,1-TCA (13)C enrichment factor consistent with abiotic degradation in biotic microcosms. 1,1-DCA carbon isotope field data suggest that this abiotic degradation of 1,1,1-TCA is a relevant process also at the field site., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

An investigation was carried out to develop a simple and efficient method to collect vapour samples for compound specific isotope analysis (CSIA) by bubbling vapours through an organic solvent (methanol or ethanol). The compounds tested were benzene and trichloroethylene (TCE). The dissolution efficiency was tested for different air volume injections, using flow rates ranging from 25ml/min to 150ml/min and injection periods varying between 10 and 40min. Based on the results, complete mass recovery for benzene and TCE in both solvents was observed for the flow rates of 25 and 50ml/min. However, small mass loss was observed at increased flow rate. At 150ml/min, recovery was on average 80±17% for benzene and 84±10% for TCE, respectively in methanol and ethanol. The δ(13)C data measured for benzene and TCE dissolved in both solvents were reproducible and were stable independently of the volume of air injected (up to 6L) or the flow rate used. The stability of δ(13)C values hence underlines no isotopic fractionation due to compound-solvent interaction or mass loss. The development of a novel and simple field sampling technique undertaken in this study will facilitate the application of CSIA to diverse gas-phase volatile organic compound studies, such as atmospheric emissions, soil gas or vapour intrusion., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Chloroperoxidase (CPO) is suspected to play an important role in the biosynthesis of natural chloroform. The aims of the present study are to evaluate the variability of the δ(37)Cl value of naturally produced chloroform and to better understand the reaction steps that control the chlorine isotope signature of chloroform. The isotope analyses have shown that the chlorination of the humic substances (HS) in the presence of high H3O(+) and Cl(-) concentrations induces a large apparent kinetic isotope effect (AKIE = 1.010-1.018) likely associated with the transfer of chlorine between two heavy atoms, whereas in the presence of low H3O(+) and Cl(-) concentrations, the formation of chloroform induces a smaller AKIE (1.005-1.006) likely associated with the formation of an HOCl-ferriprotoporphyrin IX intermediate. As the concentration of H3O(+) and Cl(-) in soils are generally at submillimolar levels, the formation of the HOCl-ferriprotoporphyrin IX intermediate is likely rate-limiting in a terrestrial environment. Given that the δ(37)Cl values of naturally occurring chloride tend to range between -1 and +1‰, the δ(37)Cl value of natural chloroform should vary between -5‰ and -8‰. As the median δ(37)Cl value of industrial chloroform is -3.0‰, the present study suggests that chlorine isotopic composition of chloroform might be used to discriminate industrial and natural sources in the environment.

The degradation of chlorinated ethenes and ethanes in clay till was investigated at a contaminated site (Vadsby, Denmark) by high resolution sampling of intact cores combined with groundwater sampling. Over decades of contamination, bioactive zones with degradation of trichloroethene (TCE) and 1,1,1-trichloroethane (1,1,1-TCA) to 1,2-cis-dichloroethene (cis-DCE) and 1,1-dichloroethane, respectively, had developed in most of the clay till matrix. Dehalobacter dominated over Dehalococcoides (Dhc) in the clay till matrix corresponding with stagnation of sequential dechlorination at cis-DCE. Sporadically distributed bioactive zones with partial degradation to ethene were identified in the clay till matrix (thickness from 0.10 to 0.22 m). In one sub-section profile the presence of Dhc with the vcrA gene supported the occurrence of degradation of cis-DCE and VC, and in another enriched δ(13)C for TCE, cis-DCE and VC documented degradation. Highly enriched δ(13)C for 1,1,1-TCA (25‰) and cis-DCE (-4‰) suggested the occurrence of abiotic degradation in a third sub-section profile. Due to fine scale heterogeneity the identification of active degradation zones in the clay till matrix depended on high resolution subsampling of the clay till cores. The study demonstrates that an integrated approach combining chemical analysis, molecular microbial tools and compound specific isotope analysis (CSIA) was required in order to document biotic and abiotic degradations in the clay till system., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Chloroform (CHCl(3)) is an environmental contaminant widely distributed around world, as well as a natural compound formed in various aquatic and terrestrial environments. However, the chemical mechanisms leading to the natural formation of chloroform in soils are not completely understood. To assess the role of trichloroacetyl-containing compound (TCAc) in the natural formation of chloroform in forest soils, carbon stable isotope analyses of chloroform and TCAc in field samples and chlorination experiments were carried out. The isotope analysis of field samples have revealed that the δ(13)C value of natural chloroform (δ(13)C(mean)=-25.8‰) is in the same range as the natural organic matter (δ(13)C(mean)=-27.7‰), whereas trichloromethyl groups of TCAc are much more enriched in (13)C (δ(13)C(mean)=-9.8‰). A similar relationship was also observed for TCAc and chloroform produced by chlorination of natural organic matter with NaOCl. The strong depletion of (13)C in chloroform relative to TCAc can be explained by carbon isotope fractionation during TCAc hydrolysis. As shown using a mathematical model, when steady state between formation of TCAc and hydrolysis is reached, the isotope ratio of chloroform is expected to correspond to isotope composition of NOM while TCAc should be enriched in (13)C by about 18.3‰, which is in good agreement with field observations. Hence this study suggests that TCAc are likely precursors of chloroform and at the same time explains why natural chloroform has a similar isotope composition as NOM despite large carbon isotope fractionation during its release., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Compound-specific stable-isotope analysis (CSIA) has greatly facilitated assessment of sources and transformation processes of organic pollutants. Multielement isotope analysis is one of the most promising applications of CSIA because it even enables distinction of different transformation pathways. This review introduces the essential features of continuous-flow isotope-ratio mass spectrometry (IRMS) and highlights current challenges in environmental analysis as exemplified for the isotopes of nitrogen, hydrogen, chlorine, and oxygen. Strategies and recent advances to enable isotopic measurements of polar contaminants, for example pesticides or pharmaceuticals, are discussed with special emphasis on possible solutions for analysis of low concentrations of contaminants in environmental matrices. Finally, we discuss different levels of calibration and referencing and point out the urgent need for compound-specific isotope standards for gas chromatography-isotope-ratio mass spectrometry (GC-IRMS) of organic pollutants.

Chloroform has been for a long time considered only as an anthropogenic contaminant. The presence of chloroform in forest soil and groundwater has been widely demonstrated. The frequent detection of chloroform in groundwater in absence of other contaminants suggests that chloroform is likely produced naturally. Compound-specific isotope analysis of chloroform was performed on soil-gas and groundwater samples to elucidate whether its source is natural or anthropogenic. The δ(13)C values of chloroform (-22.8 to -26.2‰) present in soil gas collected in a forested area are within the same range as the soil organic matter (-22.6 to -28.2‰) but are more enriched in (13)C compared to industrial chloroform (-43.2 to -63.6‰). The δ(13)C values of chloroform at the water table (-22.0‰) corresponded well to the δ(13)C of soil gas chloroform, demonstrating that the isotope signature of chloroform is maintained during transport through the unsaturated zone. Generally, the isotope signature of chloroform is conserved also during longer range transport in the aquifer. These δ(13)C data support the hypothesis that chloroform is naturally formed in some forest soils. These results may be particularly relevant for authorities' regulation of chloroform which in the case of Denmark was very strict for groundwater (<1 μg/L).

To apply compound-specific isotope methods to the evaluation of the origin and fate of organic contaminants in the unsaturated subsurface, the effect of physicochemical processes on isotope ratios needs to be known. The main objective of this study is to quantify chlorine and carbon isotope fractionation during NAPL-vapor equilibration, air-water partitioning, and diffusion of trichloroethene (TCE) and combinations of these effects during vaporization in porous media. Isotope fractionation is larger during NAPL-vapor equilibration than air-water partitioning. During NAPL-vapor equilibration, carbon, and chlorine isotope ratios evolve in opposite directions although both elements are present in the same bond, with a normal isotope effect for chlorine (ε(Cl) = -0.39 ± 0.03‰) and an inverse effect for carbon (ε(C) = +0.75 ± 0.04‰). During diffusion-controlled vaporization in a sand column, no significant carbon isotope fractionation is observed (ε(C) = +0.10 ± 0.05‰), whereas fairly strong chlorine isotope fractionation occurs (ε(Cl) = -1.39 ± 0.06‰) considering the molecular weight of TCE. In case of carbon, the inverse isotope fractionation associated with NAPL-vapor equilibration and normal diffusion isotope fractionation cancel, whereas for chlorine both processes are accompanied by normal isotope fractionation and hence they cumulate. A source of contamination that aged might thus show a shift toward heavier chlorine isotope ratios.