Search

Antiferroelectric (AFE) materials are excellent candidates for sensors, capacitors, and data storage due to their electrical switchability and high-energy storage capacity. However, imaging the nanoscale landscape of AFE domains is notoriously inaccessible, which has hindered development and intentional tuning of AFE materials. Here, we demonstrate that polarization-dependent photoemission electron microscopy can resolve the arrangement and orientation of in-plane AFE domains on the nanoscale, despite the absence of a net lattice polarization. Through direct determination of electronic transition orientations and analysis of domain boundary constraints, we establish that antiferroelectricity in β'-In 2 Se 3 is a robust property from the scale of tens of nanometers to tens of micrometers. Ultimately, the method for imaging AFE domain organization presented here opens the door to investigations of the influence of domain formation and orientation on charge transport and dynamics.

The electronic structure and functionality of 2D materials is highly sensitive to structural morphology, not only opening the possibility for manipulating material properties but also making predictable and reproducible functionality challenging. Black phosphorus (BP), a corrugated orthorhombic 2D material, has in-plane optical absorption anisotropy critical for applications, such as directional photonics, plasmonics, and waveguides. Here, we use polarization-dependent photoemission electron microscopy to visualize the anisotropic optical absorption of BP with 54 nm spatial resolution. We find the edges of BP flakes have a shift in their optical polarization anisotropy from the flake interior due to the 1D confinement and symmetry reduction at flake edges that alter the electronic charge distributions and transition dipole moments of edge electronic states, confirmed with first-principles calculations. These results uncover previously hidden modification of the polarization-dependent absorbance at the edges of BP, highlighting the opportunity for selective excitation of edge states of 2D materials with polarized light.

The ultrafast polarization response to incident light and ensuing exciton/carrier generation are essential to outstanding optoelectronic properties of lead halide perovskites (LHPs). A large number of mechanistic studies in the LHP field to date have focused on contributions to polarizability from organic cations and the highly polarizable inorganic lattice. For a comprehensive understanding of the ultrafast polarization response, we must additionally account for the nearly instantaneous hyperpolarizability response to the propagating light field itself. While light propagation is pivotal to optoelectronics and photonics, little is known about this in LHPs in the vicinity of the bandgap where stimulated emission, polariton condensation, superfluorescence, and photon recycling may take place. Here we develop two-dimensional optical Kerr effect (2D-OKE) spectroscopy to energetically dissect broadband light propagation and dispersive nonlinear polarization responses in LHPs. In contrast to earlier interpretations, the below-bandgap OKE responses in both hybrid CH 3 NH 3 PbBr 3 and all-inorganic CsPbBr 3 perovskites are found to originate from strong hyperpolarizability and highly anisotropic dispersions. In both materials, the nonlinear mixing of anisotropically propagating light fields results in convoluted oscillatory polarization dynamics. Based on a four-wave mixing model, we quantitatively derive dispersion anisotropies, reproduce 2D-OKE frequency correlations, and establish polarization-dressed light propagation in single-crystal LHPs. Moreover, our findings highlight the importance of distinguishing the often-neglected anisotropic light propagation from underlying coherent quasiparticle responses in various forms of ultrafast spectroscopy., Competing Interests: The authors declare no competing interest.

Lead halide perovskites show marked defect tolerance responsible for their excellent optoelectronic properties. These properties might be explained by the formation of large polarons, but how they are formed and whether organic cations are essential remain open questions. We provide a direct time domain view of large polaron formation in single-crystal lead bromide perovskites CH 3 NH 3 PbBr 3 and CsPbBr 3 . We found that large polaron forms predominantly from the deformation of the PbBr 3 - frameworks, irrespective of the cation type. The difference lies in the polaron formation time, which, in CH 3 NH 3 PbBr 3 (0.3 ps), is less than half of that in CsPbBr 3 (0.7 ps). First-principles calculations confirm large polaron formation, identify the Pb-Br-Pb deformation modes as responsible, and explain quantitatively the rate difference between CH 3 NH 3 PbBr 3 and CsPbBr 3 . The findings reveal the general advantage of the soft [PbX 3 ] - sublattice in charge carrier protection and suggest that there is likely no mechanistic limitations in using all-inorganic or mixed-cation lead halide perovskites to overcome instability problems and to tune the balance between charge carrier protection and mobility.

A charge carrier in a lead halide perovskite lattice is protected as a large polaron responsible for the remarkable photophysical properties, irrespective of the cation type. All-inorganic-based APbX 3 perovskites may mitigate the stability problem for their applications in solar cells and other optoelectronics., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In conventional semiconductor solar cells, carriers are extracted at the band edges and the excess electronic energy (E*) is lost as heat. If E* is harvested, power conversion efficiency can be as high as twice the Shockley-Queisser limit. To date, materials suitable for hot carrier solar cells have not been found due to efficient electron/optical-phonon scattering in most semiconductors, but our recent experiments revealed long-lived hot carriers in single-crystal hybrid lead bromide perovskites. Here we turn to polycrystalline methylammonium lead iodide perovskite, which has emerged as the material for highly efficient solar cells. We observe energetic electrons with excess energy ⟨E*⟩ ≈ 0.25 eV above the conduction band minimum and with lifetime as long as ∼100 ps, which is 2-3 orders of magnitude longer than those in conventional semiconductors. The energetic carriers also give rise to hot fluorescence emission with pseudo-electronic temperatures as high as 1900 K. These findings point to a suppression of hot carrier scattering with optical phonons in methylammonium lead iodide perovskite. We address mechanistic origins of this suppression and, in particular, the correlation of this suppression with dynamic disorder. We discuss potential harvesting of energetic carriers for solar energy conversion.

Hybrid lead halide perovskites exhibit carrier properties that resemble those of pristine nonpolar semiconductors despite static and dynamic disorder, but how carriers are protected from efficient scattering with charged defects and optical phonons is unknown. Here, we reveal the carrier protection mechanism by comparing three single-crystal lead bromide perovskites: CH 3 NH 3 PbBr 3 , CH(NH 2 ) 2 PbBr 3 , and CsPbBr 3 We observed hot fluorescence emission from energetic carriers with ~10 2 -picosecond lifetimes in CH 3 NH 3 PbBr 3 or CH(NH 2 ) 2 PbBr 3 , but not in CsPbBr 3 The hot fluorescence is correlated with liquid-like molecular reorientational motions, suggesting that dynamic screening protects energetic carriers via solvation or large polaron formation on time scales competitive with that of ultrafast cooling. Similar protections likely exist for band-edge carriers. The long-lived energetic carriers may enable hot-carrier solar cells with efficiencies exceeding the Shockley-Queisser limit., (Copyright © 2016, American Association for the Advancement of Science.)

This study characterizes two of the primary photodissociation channels of 2-bromoethyl nitrite, BrCH2CH2ONO, at 193 nm and the subsequent unimolecular dissociation channels of the nascent vibrationally excited BrCH2CH2O radicals produced from the O-NO bond photofission. We use a crossed laser-molecular beam scattering apparatus with electron bombardment detection. Upon photodissociation of BrCH2CH2ONO at 193 nm, the measured branching ratio between primary O-NO photofission and C-Br photofission is 3.9:1 (O-NO/C-Br). The measured O-NO photofission recoil kinetic energy distribution (P(ET)) peaks near 30 kcal/mol and extends from 20 to 50 kcal/mol. We use the O-NO photofission P(ET) to characterize the internal energy distribution in the nascent ground-electronic-state BrCH2CH2O radicals. At 193 nm, all of the BrCH2CH2O radicals are formed with enough internal energy to unimolecularly dissociate to CH2Br + H2CO or to BrCH2CHO + H. We also investigated the possibility of the BrCH2CH2O → CH2CHO + HBr reaction arising from the vibrationally excited BrCH2CH2O radicals produced from O-NO primary photodissociation. Signal strengths at HBr(+), however, demonstrate that the vinoxy product does not have HBr as a cofragment, so the BrCH2CH2O → HBr + vinoxy channel is negligible compared to the CH2Br + H2CO channel. We also report our computational prediction of the unimolecular dissociation channels of the vibrational excited CH2CH2ONO radical resulting from C-Br bond photofission. Our theoretical calculations on the ground-state CH2CH2ONO potential energy surface at the G4//B3LYP/6-311++G(3df,2p) level of theory give the energetics of the zero-point corrected minima and transition states. The lowest accessible barrier height for the unimolecular dissociation of CH2CH2ONO is a 12.7 kcal/mol barrier from the cis-ONO conformer, yielding NO2 + ethene. Our measured internal energy distribution of the nascent CH2CH2ONO radicals together with this computational result suggests that the CH2CH2ONO radicals will dissociate to NO2 + ethene, with a small possible branching to NO + oxirane.