Search

Objective: To determine whether a simulated low-dose metal artifact reduction (MAR) CT technique is comparable with a clinical dose MAR technique for shoulder arthroplasty evaluation., Materials and Methods: Two shoulder arthroplasties in cadavers and 25 shoulder arthroplasties in patients were scanned using a clinical dose (140 kVp, 300 qrmAs); cadavers were also scanned at half dose (140 kVp, 150 qrmAs). Images were reconstructed using a MAR CT algorithm at full dose and a noise-insertion algorithm simulating 50% dose reduction. For the actual and simulated half-dose cadaver scans, differences in SD for regions of interest were assessed, and streak artifact near the arthroplasty was graded by 3 blinded readers. Simulated half-dose scans were compared with full-dose scans in patients by measuring differences in implant position and by comparing readers' grades of periprosthetic osteolysis and muscle atrophy., Results: The mean difference in SD between actual and simulated half-dose methods was 2.42 HU (95% CI [1.4, 3.4]). No differences in streak artifact grades were seen in 13/18 (72.2%) comparisons in cadavers. In patients, differences in implant position measurements were within 1° or 1 mm in 149/150 (99.3%) measurements. The inter-reader agreement rates were nearly identical when readers were using full-dose (77.3% [232/300] for osteolysis and 76.9% [173/225] for muscle atrophy) and simulated half-dose (76.7% [920/1200] for osteolysis and 74.0% [666/900] for muscle atrophy) scans., Conclusion: A simulated half-dose MAR CT technique is comparable both quantitatively and qualitatively with a standard-dose technique for shoulder arthroplasty evaluation, demonstrating that this technique could be used to reduce dose in arthroplasty imaging.

Background: A transtendon interimplant mattress repair along the medial row for partial-thickness rotator cuff repairs has been described with clinical success. However, the biomechanical characteristics for such a repair have not been elucidated., Hypothesis: A knotless interimplant mattress repair may show improved or equivalent load and strain characteristics, compared with a repair using isolated mattress repairs over each of 2 anchors., Study Design: Controlled laboratory study., Methods: Seven matched pairs of human cadaveric shoulders were dissected. Articular-sided tears were created involving 50% of the supraspinatus footprint. In 7 shoulders, repairs were performed with mattress configurations isolated over each of 2 anchor sites (control group). In 7 contralateral shoulders, a knotless interimplant mattress suture configuration was employed creating bridging sutures between implants. For all specimens, a materials-testing machine was used to cyclically load each repair from 10 to 180 N for 30 cycles; each repair was then loaded to failure. A deformation rate of 1 mm per second was employed for all tests. A video-digitizing system was employed to quantitatively measure the gap formation and strain on the footprint area of the repair. For detecting gap formation, 7 matched pairs were necessary for achieving a power of at least 90%., Results: During cyclic loading, gap formation at the anterior tendon was significantly lower in the control group (P < .05) but did not exceed 0.5 mm. There were no significant differences for linear stiffness, hysteresis, and strain between the 2 constructs. During tensile load-to-failure testing, there were no significant differences at yield load between the control and knotless techniques (293.90 + or - 132.72 N and 320.38 + or - 237.01 N, respectively; P > .05). There were no differences for stiffness, ultimate load, and energy absorbed to failure between the 2 repairs (P > .05). Gap formation in 3 regions was not significantly different between groups at yield and ultimate loads (P > .05). The anterior regions of the repair were the first to fail in all constructs., Conclusion: A transtendon interimplant mattress rotator cuff repair for partial articular-sided tendon tears involving 50% of the footprint has biomechanical characteristics similar to those of a repair employing 2 isolated mattress configurations. An interim-plant mattress repair can protect tendon strain; it also exhibits yield loads that exceed those typically experienced in the early postoperative period., Clinical Relevance: A medial-row interimplant mattress repair configuration that is knotless may facilitate repair without compromising biomechanical characteristics.

Background: Biomechanical testing without humeral motion is a standard method for evaluating rotator cuff repair constructs. This cannot elucidate the effects of dynamic external rotation on the repair, which is a common postoperative motion., Hypothesis: Biomechanical properties and gap formation of rotator cuff repairs will be different when dynamic external rotation is allowed to occur during loading., Study Design: Controlled laboratory study., Methods: In 6 matched pairs of human cadaveric shoulders, a commonly used single-row rotator cuff repair was performed. In 6 shoulders, a materials testing machine and a custom testing apparatus that permits cyclic rotation (0 degrees -30 degrees ) were employed (group 1). In contralateral shoulders, the apparatus was fixed to prevent humeral rotation (group 2). All repairs were cyclically loaded from 0 to 60 N at a displacement rate of 1 mm/s for 30 cycles. The constructs were then loaded to failure. Repair strength, gap formation, and strain were compared between groups., Results: Cyclic loading revealed no difference in linear stiffness between testing conditions. Hysteresis was significantly greater when dynamic external rotation was allowed to occur. With load to failure, there were no differences in yield or ultimate load. Anterior tendon gap formation was greater at end rotation (30 degrees of humeral external rotation) and at yield load, and strain on the posterior tendon was less with dynamic external rotation. With dynamic external rotation, gap formation and tendon strain were significantly greater in the anterior region of the supraspinatus tendon compared with the posterior region., Discussion: External rotation using postoperative physiologic loads affects gap formation and tendon strain between anterior and posterior supraspinatus tendon regions. Previous testing models without humeral rotation may underestimate gap formation and anterior tendon strain and overestimate posterior tendon strain., Clinical Relevance: Understanding regional differences with respect to these variables, depending on quality of repair, may provide the surgeon a framework from which to prescribe guidelines for postoperative rehabilitation.