Search

In this study, we investigate the scope of molybdenum disulfide (MoS 2 ) as an electric field sensor. We show that MoS 2 sensors can be used to identify the polarity as well as to detect the magnitude of the electric field. The response of the sensor is recorded as the change in the drain current when the electric field is applied. The sensitivity, defined as the percentage change in the drain current, reveals that it has a linear relation with the magnitude of the electric field. Furthermore, the sensitivity is highly dependent on the layer thickness, with the single-layer device being highly sensitive and the sensitivity decreasing with the thickness. We have also compared the electric field sensitivity of MoS 2 devices to that of previously studied graphene devices and found the former to be exceptionally sensitive than the latter for a given electric field magnitude., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Thermal rectifiers are essential in optimizing heat dissipation in solid-state devices to enhance energy efficiency, reliability, and overall performance. In this study, we experimentally investigate the thermal rectification phenomenon in suspended asymmetric graphene ribbons (GRs). The asymmetry within the graphene is introduced by incorporating periodic parallel nanoribbons on one side of the GR while maintaining the other side in a pristine form. Our findings reveal a substantial thermal rectification effect in these asymmetric graphene devices, reaching up to 45% at room temperature and increasing further at lower environmental temperatures. This effect is attributed to a significant thermal conductivity contrast between pristine graphene and nanoribbon graphene within the asymmetric structure. We observe that the incorporation of nanoribbons leads to a notable reduction in thermal conductivity, primarily due to phonon scattering and bottleneck effects near the nanoribbon edges. These findings suggest that graphene structures exhibiting asymmetry, facilitated by parallel nanoribbons, hold promise for effective heat management at the nanoscale level and the development of practical phononic devices., (Creative Commons Attribution license.)

Graphene's inherent nonselectivity and strong atmospheric doping render most graphene-based sensors unsuitable for atmospheric applications in environmental monitoring of pollutants and breath detection of biomarkers for noninvasive medical diagnosis. Hence, demonstrations of graphene's gas sensitivity are often in inert environments such as nitrogen, consequently of little practical relevance. Herein, target gas sensing at the graphene-activated carbon interface of a graphene-nanopored activated carbon molecular-sieve sensor obtained via the postlithographic pyrolysis of Novolac resin residues on graphene nanoribbons is shown to simultaneously induce ammonia selectivity and atmospheric passivation of graphene. Consequently, 500 parts per trillion (ppt) ammonia sensitivity in atmospheric air is achieved with a response time of ∼3 s. The similar graphene and a-C workfunctions ensure that the ambipolar and gas-adsorption-induced charge transfer characteristics of pristine graphene are retained. Harnessing the van der Waals bonding memory and electrically tunable charge-transfer characteristics of the adsorbed molecules on the graphene channel, a molecular identification technique (charge neutrality point disparity) is developed and demonstrated to be suitable even at parts per billion (ppb) gas concentrations. The selectivity and atmospheric passivation induced by the graphene-activated carbon interface enable atmospheric applications of graphene sensors in environmental monitoring and noninvasive medical diagnosis.

Electric field sensing has various real-life applications, such as early prediction of lightning. In this study, we effectively used graphene as an electric field sensor that can detect both positive and negative electric fields. The response of the sensor is recorded as the change in drain current under the application of an electric field. In addition, by systematic analysis, we established the mechanism of the graphene electric field sensor, and it is found to be different from the previously proposed one. The mechanism relies on the transfer of electrons between graphene and the traps at the SiO 2 /graphene interface. While the direction of charge transfer depends on the polarity of the applied electric field, the amount of charge transferred depends on the magnitude of the electric field. Such a charge transfer changes the carrier concentration in the graphene channel, which is reflected as the change in drain current., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

Controlling the heat transport and thermal conductivity through a material is of prime importance for thermoelectric applications. Phononic crystals, which are a nanostructured array of specially designed pores, can suppress heat transportation owing to the phonon wave interference, resulting in bandgap formation in their band structure. To control heat phonon propagation in thermoelectric devices, phononic crystals with a bandgap in the THz regime are desirable. In this study, we carried out simulation on snowflake shaped phononic crystal and obtained several phononic bandgaps in the THz regime, with the highest being at ≈2 THz. The phononic bandgap position and the width of the bandgap were found to be tunable by varying the neck-length of the snowflake structure. A unique bandgap map computed by varying the neck-length continuously provides enormous amounts of information as to the size and position of the phononic bandgap for various pore dimensions. We have also carried out transmission spectrum analysis and found good agreement with the band structure calculations. The pressure map visualized at various frequencies validates the effectiveness of snowflake shaped nano-pores in suppressing the phonons partially or completely, depending on the transmission probabilities.

Valley current, a stable, dissipationless current, originates due to the emergence of Berry curvature in inversion symmetry broken systems. Several theoretical predictions and experimental observations have explored layer symmetry breaking in AB-stacked bilayer graphene due to long-range Coulomb interactions between the electrons. However, none of the experimental studies conducted so far have observed valley current in unbiased bilayer graphene, which makes it vital to study the Berry curvature in unbiased bilayer graphene. In this study, we observed a non-zero Berry curvature with opposite values at K and K' valleys, validating the argumentation of the asymmetry persistent in unbiased bilayer graphene. The magnitude, as well as the polarity of the Berry curvature, is tunable with the application of an out-of-plane electric field. These results are especially important because they can lead to the realization of a valley valve, in which the carriers from the K and K' valleys can be regulated with a gate at the centre of a bilayer graphene nanoribbon.