Search

A set of graphitic carbon nitride samples was prepared using a straightforward experimental procedure without templates and any subsequent treatments. The materials were studied in-depth using a range of physical and chemical methods such as X-ray diffraction, FTIR spectroscopy, elemental analysis (CHN), nitrogen physisorption, SEM, XPS, TPD CO 2 . The resulting g-C 3 N 4 was shown to be highly efficient in carboxymethylation of cinnamyl alcohol with dimethyl carbonate yielding up to ca. 82 % of the desired cinnamyl methyl carbonate. In the studied conditions, an increase in the surface N atomic content leads to an increase in selectivity towards the desired carbonate, while a higher surface O content was beneficial for side products. Metal-free graphitic carbon nitride was shown to be one of the most productive (ca. 2 mol/h kg cat ) in the investigated reaction among studied heterogeneous catalysts., (© 2023 The Authors. ChemPlusChem published by Wiley-VCH GmbH.)

MXenes, a family of two-dimensional (2D) transition metal carbides, have been discovered as exciting candidates for various energy storage and conversion applications, including green hydrogen production by water splitting. Today, these materials mostly remain interesting objects for in-depth fundamental studies and scientific curiosity due to issues related to their preparation and environmental stability, limiting potential industrial applications. This work proposes a simple and inexpensive concept of composite electrodes composed of molybdenum- and titanium-containing MAX phases and MXene as functional materials. The concept is based on the modification of the initial MAX phase by the addition of metallic Ni, tuning Al- and carbon content and synthesis conditions, followed by fluoride-free etching under alkaline conditions. The proposed methodology allows producing a composite electrode with a well-developed 3D porous MAX phase-based structure acting as a support for electrocatalytic species, including MXene, and possessing good mechanical integrity. Electrochemical tests have shown a high electrochemical activity of such electrodes towards the hydrogen evolution reaction (HER), combined with a relatively high areal capacitance (up to 10 F cm -2 )., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Herein, thermodynamic assessment is proposed to screen suitable precursors for the solid-state synthesis of manganese ferrite, by mechanosynthesis at room temperature or by subsequent calcination at relatively low temperatures, and the main findings are validated by experimental results for the representative precursor mixtures MnO + FeO 3 , MnO 2 + Fe 2 O 3 , and MnO 2 +2FeCO 3 . Thermodynamic guidelines are provided for the synthesis of manganese ferrite from (i) oxide and/or metallic precursors; (ii) carbonate + carbonate or carbonate + oxide powder mixtures; (iii) other precursors. It is also shown that synthesis from metallic precursors (Mn + 2Fe) requires a controlled oxygen supply in limited redox conditions, which is hardly achieved by reducing gases H 2 /H 2 O or CO/CO 2 . Oxide mixtures with an overall oxygen balance, such as MnO + Fe 2 O 3 , act as self-redox buffers and offer prospects for mechanosynthesis for a sufficient time (>9 h) at room temperature. On the contrary, the fully oxidised oxide mixture MnO 2 + Fe 2 O 3 requires partial reduction, which prevents synthesis at room temperature and requires subsequent calcination at temperatures above 1100 °C in air or in nominally inert atmospheres above 750 °C. Oxide + carbonate mixtures, such as MnO 2 +2FeCO 3 , also yield suitable oxygen balance by the decomposition of the carbonate precursor and offer prospects for mechanosynthesis at room temperature, and residual fractions of reactants could be converted by firing at relatively low temperatures (≥650 °C).

Thermoelectric conversion may take a significant share in future energy technologies. Oxide-based thermoelectric composite ceramics attract attention for promising routes for control of electrical and thermal conductivity for enhanced thermoelectric performance. However, the variability of the composite properties responsible for the thermoelectric performance, despite nominally identical preparation routes, is significant, and this cannot be explained without detailed studies of thermal transport at the local scale. Scanning thermal microscopy (SThM) is a scanning probe microscopy method providing access to local thermal properties of materials down to length scales below 100 nm. To date, realistic quantitative SThM is shown mostly for topographically very smooth materials. Here, methods for SThM imaging of bulk ceramic samples with relatively rough surfaces are demonstrated. "Jumping mode" SThM (JM-SThM), which serves to preserve the probe integrity while imaging rough surfaces, is developed and applied. Experiments with real thermoelectric ceramics show that the JM-SThM can be used for meaningful quantitative imaging. Quantitative imaging is performed with the help of calibrated finite-elements model of the SThM probe. The modeling reveals non-negligible effects associated with the distributed nature of the resistive SThM probes used; corrections need to be made depending on probe-sample contact thermal resistance and probe current frequency., (© 2023 The Authors. Small Methods published by Wiley-VCH GmbH.)

The alkaline electrolytic production of iron is gaining interest due to the absence of CO 2 emissions and significantly lower electrical energy consumption when compared with traditional steelmaking. The possibility of using an iron-bearing pseudobrookite mineral, Fe 2 TiO 5 , is explored for the first time as an alternative feedstock for the electrochemical reduction process. To assess relevant impacts of the presence of titanium, similar electroreduction processes were also performed for Fe 2 TiO 5 ·Fe 2 O 3 and Fe 2 O 3 . The electroreduction was attempted using dense and porous ceramic cathodes. Potentiostatic studies at the cathodic potentials of -1.15--1.30 V vs. an Hg|HgO|NaOH reference electrode and a galvanostatic approach at 1 A/cm 2 were used together with electroreduction from ceramic suspensions, obtained by grinding the porous ceramics. The complete electroreduction to Fe 0 was only possible at high cathodic polarizations (-1.30 V), compromising the current efficiencies of the electrochemical process due to the hydrogen evolution reaction impact. Microstructural evolution and phase composition studies are discussed, providing trends on the role of titanium and corresponding electrochemical mechanisms. Although the obtained results suggest that pseudobrookite is not a feasible material to be used alone as feedstock for the electrolytic iron production, it can be considered with other iron oxide materials and/or ores to promote electroreduction.

This work further explores the possibilities for designing the high-temperature electrical performance of the thermoelectric Ca 3 Co 4 O 9 phase, by a composite approach involving separate metallic iron and nickel particles additions, and by employing two different sintering schemes, capable to promote the controlled interactions between the components, encouraged by our recent promising results obtained for similar cobalt additions. Iron and nickel were chosen because of their similarities with cobalt. The maximum power factor value of around 200 μWm -1 K -2 at 925 K was achieved for the composite with the nominal nickel content of 3% vol., processed via the two-step sintering cycle, which provides the highest densification from this work. The effectiveness of the proposed approach was shown to be strongly dependent on the processing conditions and added amounts of metallic particles. Although the conventional one-step approach results in Fe- and Ni-containing composites with the major content of the thermoelectric Ca 3 Co 4 O 9 phase, their electrical performance was found to be significantly lower than for the Co-containing analogue, due to the presence of less-conducting phases and excessive porosity. In contrast, the relatively high performance of the composite with a nominal nickel content of 3% vol. processed via a two-step approach is related to the specific microstructural features from this sample, including minimal porosity and the presence of the Ca 2 Co 2 O 5 phase, which partially compensate the complete decomposition of the Ca 3 Co 4 O 9 matrix. The obtained results demonstrate different pathways to tailor the phase composition of Ca 3 Co 4 O 9 -based materials, with a corresponding impact on the thermoelectric performance, and highlight the necessity of more controllable approaches for the phase composition tuning, including lower amounts and different morphologies of the dispersed metallic phases.

This paper reports a novel composite-based processing route for improving the electrical performance of Ca 3 Co 4 O 9 thermoelectric (TE) ceramics. The approach involves the addition of metallic Co, acting as a pore filler on oxidation, and considers two simple sintering schemes. The (1-x)Ca 3 Co 4 O 9 /xCo composites (x = 0%, 3%, 6% and 9% vol.) have been prepared through a modified Pechini method, followed by one- and two-stage sintering, to produce low-density (one-stage, 1ST) and high-density (two-stage, 2ST) ceramic samples. Their high-temperature TE properties, namely the electrical conductivity (σ), Seebeck coefficient (α) and power factor (PF), were investigated between 475 and 975 K, in air flow, and related to their respective phase composition, morphology and microstructure. For the 1ST case, the porous samples (56%-61% of ρ th ) reached maximum PF values of around 210 and 140 μWm -1 ·K -2 for the 3% and 6% vol. Co-added samples, respectively, being around two and 1.3 times higher than those of the pure Ca 3 Co 4 O 9 matrix. Although 2ST sintering resulted in rather dense samples (80% of ρ th ), the efficiency of the proposed approach, in this case, was limited by the complex phase composition of the corresponding ceramics, impeding the electronic transport and resulting in an electrical performance below that measured for the Ca 3 Co 4 O 9 matrix (224 μWm -1 ·K -2 at 975K).

This work aims at the preparation of multifunctional titania-based photocatalysts with inherent capabilities for thermal co-activation and stabilisation of anatase polymorph, by designing the phase composition and microstructure of rutile-silicon carbide mixture. The processing involved a conventional solid state route, including partial pre-reduction of rutile by SiC in inert Ar atmosphere, followed by post-oxidation in air. The impacts of processing conditions on the phase composition and photocatalytic activity were evaluated using Taguchi planning. The XRD studies confirmed the presence of rutile/anatase mixtures in the post-oxidised samples. The results emphasise that pre-reduction and post-oxidation temperatures are critical in defining the phase composition, while post-oxidation time is relevant for the photocatalytic performance. Microstructural studies revealed the formation of core-shell particles, which can suppress the photocatalytic activity. The highest apparent reaction rate of the photodegradation of methylene blue was observed for the sample pre-reduced in Ar at 1300 °C for 5 h and then calcined in air at 400 °C for 25 h. Though its performance was ~1.6-times lower than that for the same amount of nanostructured industrial P25 photocatalyst, it was achieved in the material possessing 2-3 times lower surface area and containing ~50 mol% of SiO 2 and SiC, thus demonstrating excellent prospects for further improvements.

Zinc oxide (ZnO) has being recognised as a potentially interesting thermoelectric material, allowing flexible tuning of the electrical properties by donor doping. This work focuses on the assessment of tantalum doping effects on the relevant structural, microstructural, optical and thermoelectric properties of ZnO. Processing of the samples with a nominal composition Zn 1-x Ta x O by conventional solid-state route results in limited solubility of Ta in the wurtzite structure. Electronic doping is accompanied by the formation of other defects and dislocations as a compensation mechanism and simultaneous segregation of ZnTa 2 O 6 at the grain boundaries. Highly defective structure and partial blocking of the grain boundaries suppress the electrical transport, while the evolution of Seebeck coefficient and band gap suggest that the charge carrier concentration continuously increases from x = 0 to 0.008. Thermal conductivity is almost not affected by the tantalum content. The highest ZT ~0.07 at 1175 K observed for Zn 0.998 Ta 0.002 O is mainly provided by high Seebeck coefficient (-464 V/K) along with a moderate electrical conductivity of ~13 S/cm. The results suggest that tantalum may represent a suitable dopant for thermoelectric zinc oxide, but this requires the application of specific processing methods and compositional design to enhance the solubility of Ta in wurtzite lattice., Competing Interests: The authors declare no conflicts of interest.

Magnetite (Fe3O4) offers unique physical and chemical properties, being an important material for many industrial applications. Certain limitations on the application conditions are, however, imposed by the redox stability issue. Fine control of the iron oxidation states represents a challenge for materials engineering. The present work explores relevant redox processes in iron oxides, processed under highly non-equilibrium laser floating zone (LFZ) conditions under atmospheres with different oxygen activities. The as-grown fibres showed a structure composed of the Fe3O4 core and the Fe2O3 shell. This study uncovers unexpectedly lower hematite content and shell thickness for the fibres processed under more oxidizing conditions. Combined structural and microstructural studies, supported by the analysis of the existing literature data, strongly suggest that the redox processes during the LFZ process can be rather determined by kinetics of melt crystallization, nuclei formation and heat transfer than by the oxygen content in the gas phase. The proposed mechanisms are further confirmed by electrical and magnetic studies of the composite fibres.

One-dimensional Haldane gap materials, such as the rare earth barium chain nickelates, have received great interest due to their vibrant one-dimensional spin antiferromagnetic character and unique structure. Herein we report how these 1D structural features can also be highly beneficial for thermoelectric applications by analysis of the system Ca x BaGd 2-x NiO 5 0 ≤ x ≤ 0.25. Attractive Seebeck coefficients of 140-280 μV K -1 at 350-1300 K are retained even at high acceptor-substitution levels, provided by the interplay of low dimensionality and electronic correlations. Furthermore, the highly anisotropic crystal structure of Haldane gap materials allows very low thermal conductivities, reaching only 1.5 W m -1 K -1 at temperatures above 1000 K, one of the lowest values currently documented for prospective oxide thermoelectrics. Although calcium substitution in BaGd 2 NiO 5 increases the electrical conductivity up to 5-6 S cm -1 at 1150 K < T < 1300 K, this level remains insufficient for thermoelectric applications. Hence, the combination of highly promising Seebeck coefficients and low thermal conductivities offered by this 1D material type underscores a potential new structure type for thermoelectric materials, where the main challenge will be to engineer the electronic band structure and, probably, microstructural features to further enhance the mobility of the charge carriers.

This study highlights that Fe additives offer better catalytic properties than carbon, Fe-C (iron carbide/carbon composites), and Fe-Mg (Mg 2 FeH 6 ) additives for the low-temperature dehydrogenation of magnesium hydride. The in situ X-ray diffraction measurements prove the formation of a Mg 2 FeH 6 phase in iron additive loaded MgH 2 . Nonetheless, differential scanning calorimetry data suggest that this Mg 2 FeH 6 phase does not have any influence on dehydrogenation properties of MgH 2 . On the other hand, the composite system Mg 2 FeH 6 /MgH 2 shows significantly improved dehydrogenation properties even in absence of further additives. It is suggested that the improved system performance of Fe loaded MgH 2 is attributed to restrictions on crystal growth of MgH 2 and the catalytic behavior of Fe nanoparticles, rather than any intrinsic catalytic properties offered by the formed mixed metal phase Mg 2 FeH 6 ., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The present study aims to understand the catalysis of the MgH2 -Nb2 O5 hydrogen storage system. To clarify the chemical interaction between MgH2 and Nb2 O5 , the mechanochemical reaction products of a composite mixture of MgH2 +0.167 Nb2 O5 was monitored at different time intervals (2, 5, 15, 30, and 45 min, as well as 1, 2, 5, 10, 15, 20, 25, and 30 h). The study confirms the formation of catalytically active Nb-doped MgO nanoparticles (typically Mgx Nby Ox+y , with a crystallite size of 4-8 nm) by transforming reactants through an intermediate phase typified by Mgm-x Nb2n-y O5n-(x+y) . The initially formed Mgx Nby Ox+y product is shown to be Nb rich, with the concentration of Mg increasing upon increasing milling time. The nanoscale end-product Mgx Nby Ox+y closely resembles the crystallographic features of MgO, but with at least a 1-4 % higher unit cell volume. Unlike MgO, which is known to passivate the surfaces in MgH2 system, the Nb-dissolved MgO effectively mediates the Mg-H2 sorption reaction in the system. We believe that this observation will lead to new developments in the area of catalysis for metal-gas interactions., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Although steel production by molten oxide electrolysis offers potential economic and environmental advantages over classic extractive metallurgy, its feasibility is far from being convincingly demonstrated, mainly due to inherent experimental difficulties exerted by harsh conditions and lack of knowledge regarding relevant mechanisms and physico-chemical processes in the melts. The present work was intended to demonstrate the concept of pyroelectrolysis at very high temperature near the minimum liquidus point of magnesium aluminosilicate, being conducted under electron-blocking conditions using yttria-stabilized zirconia cells, and to provide a new insight into electrochemistry behind this process. Significant current yields are possible for pyroelectrolysis performed in electron-blocking mode using a solid electrolyte membrane to separate the anode and the molten electrolyte. Parasitic electrochemical processes rise gradually as the concentration of iron oxide dissolved in the molten electrolytes is depleted, impairing faradaic efficiency. Reduction of silica to metallic silicon was identified as a significant contribution to those parasitic currents, among other plausible processes. Direct pyroelectrolysis without electron blocking was found much less plausible, due to major limitations on faradaic efficiency imposed by electronic leakage and insufficient ionic conductivity of the aluminosilicate melt. Ohmic losses may consume an excessive fraction of the applied voltage, thus failing to sustain the Nernst potential required for reduction to metallic iron. The results suggest the need for further optimization of the molten electrolyte composition to promote ionic conductivity and to suppress electronic transport contribution, possibly, by tuning the Al/Si ratio and altering the network-forming/modifying behaviour of the iron cations.

Donor-substituted strontium titanate ceramics demonstrate one of the most promising performances among n-type oxide thermoelectrics. Here we report a marked improvement of the thermoelectric properties in rare-earth substituted titanates Sr0.9R0.1TiO3±δ (R = La, Ce, Pr, Nd, Sm, Gd, Dy, Y) to achieve maximal ZT values of as high as 0.42 at 1190 K < T < 1225 K, prepared via a conventional solid state route followed by sintering under strongly reducing conditions (10%H2-90%N2, 1773 K). As a result of complex defect chemistry, both electrical and thermal properties were found to be dependent on the nature of the rare-earth cation and exhibit an apparent correlation with the unit cell size. High power factors of 1350-1550 μW m(-1) K(-2) at 400-550 K were observed for R = Nd, Sm, Pr and Y, being among the largest reported so far for n-type conducting bulk-ceramic SrTiO3-based materials. Attractive ZT values at high temperatures arise primarily from low thermal conductivity, which, in turn, stem from effective phonon scattering in oxygen-deficient perovskite layers formed upon reduction. The results suggest that highly-reducing conditions are essential and should be employed, whenever possible, in other related micro/nanostructural engineering approaches to suppress the thermal conductivity in target titanate-based ceramics.