Search

Recently, there has been a growing interest in the use of sandwich panels that, beyond handling well-known bending stress, can withstand torsional stresses. This is particularly relevant for wall applications when the panels are equipped with photovoltaic or supplemental curtain wall modules. This research article presents a detailed exploration of the structural behavior of eccentrically loaded sandwich panels, with a specific focus on warping torsion. Experimental and numerical studies were conducted on polyisocyanurate (PU) core sandwich panels, commonly employed in building envelopes. These studies involved various dimensions and material properties, while omitting longitudinal joints. The experimental study provided essential insights and validated the numerical model in ANSYS. Enabling parametric variation, the numerical analysis extends the analysis beyond the experimental scope. Results revealed a high degree of correlation between experimental, numerical, and analytical solutions, regarding the rotation, as well as the normal and shear stress of the panel. Confirming the general applicability of warping torsion in sandwich panels with certain limitations, the study contributes valuable data for applications and design of eccentrically loaded sandwich panels, laying the foundation for potential engineering calculation methods.

A deep understanding of the material parameters and the behavior of sandwich panels, which are used in the construction industry as roof and façade cladding, is important for the design of these construction components. Due to the constant changes in the polyurethane (PU) foams used as a core material, the experimental database for the current foams is small. Nowadays, there is an increasing number of failures of façade and roof panels after installation. This article presents a variety of experimental investigations on sandwich panels from two manufacturers with a core of polyisocyanurate (PIR) rigid foam (density: 40 kg/m 3 ). As part of this study, compression, tension, shear, and bending tests were performed in several spatial directions and over the range required by the standard. The results of the tests showed the orthotropy of the core material and the dependence of the material on the direction and type of load. The stress-strain curves showed linear and non-linear areas. Using the data from this experimental study, a numerical model was implemented which utilized the Hill yield criterion to represent the orthotropy of the core material. The present investigation suggests that the classical von Mises failure criterion, used in many studies, is not suitable for the foam system applied in these sandwich panels. Instead, the Tsai-Wu criterion is more appropriate for defining the failure stresses.

Ultracold collisions between Cs atoms and Cs2 dimers in the electronic ground state are observed in an optically trapped gas of atoms and molecules. The Cs2 molecules are formed in the triplet ground state by cw photoassociation through the outer well of the 0-(g) (P3/2) excited electronic state. Inelastic atom-molecule collisions converting internal excitation into kinetic energy lead to a loss of Cs2 molecules from the dipole trap. Rate coefficients are determined for collisions involving Cs atoms in either the F=3 or F=4 hyperfine ground state, and Cs2 molecules in either highly vibrationally excited states (nu'=32-47) or in low vibrational states (nu'=4-6) of the a3 summation(u)+ triplet ground state. The rate coefficients beta approximately 10(-10) cm3/s are found to be largely independent of the vibrational and rotational excitation indicating unitary limited cross sections.

Functional genomics is inundating the pharmaceutical industry with large numbers of potential gene targets from several sources such as gene expression profiling experiments (DNA microchips, proteomics) or database mining. Oligonucleotide-based RNA-knock down technologies such as antisense or RNA interference can aid in the filtering and prioritization of target candidates in the drug discovery process.